Biodegradability and biocompatibility study of poly(chitosan-g-lactic acid) scaffolds

A biodegradable, biocompatible poly(chitosan-g-lactic acid) (PCLA) scaffold was prepared and evaluated in vitro and in vivo. The PCLA scaffold was obtained by grafting lactic acid (LA) onto the amino groups on chitosan (CS) without a catalyst. The PCLA scaffolds were characterized by Fourier Transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The biodegradabilty was determined by mass loss in vitro, and degradation in vivo as a function of feed ratio of LA/CS. Bone marrow mesenchymal stem cell (BMSC) culture experiments and histological examination were performed to evaluate the PCLA scaffolds' biocompatibility. The results indicated that PCLA was promising for tissue engineering application.     

Fabrication and characterization of chitosan-gelatin/single-walled carbon nanotubes electrospun composite scaffolds for cartilage tissue engineering applications

Cartilage is a connective tissue with a slow healing rate due to lack in blood circulation and slow metabolism. Designing tissue engineering scaffolds modified based on its specific features can assist its natural regeneration process. In this study, the chitosan-gelatin/single-walled carbon nanotubes functionalized by COOH (SWNTs-COOH) nanocomposite scaffolds were fabricated through electrospinning. The effect of each component and different duration of cross-linking were assessed in terms of morphology, porosity, chemical structure, thermal behavior, mechanical properties, wettability, biodegradability, and in vitro cell culture study. Adding SWNTs-COOH decreased fiber diameter, water contact angle and degradation rate while increased tensile strength, hydrophilicity, stability and cell viability, due to their high intrinsic electrical conductivity, and mechanical properties and the presence of COOH functional groups in its structure. All the sample presented a porosity percentage of more than 80%, which is essential for tissue engineering scaffolds. The presence SWNTs-COOH did not have any adverse effect on cytocompatibility. The optimal cross-linking time increased the stability of the scaffolds in PBS. It can be concluded that the chitosan-gelatin/1wt% SWNTs-COOH scaffold can be appropriate for cartilage tissue engineering applications.     

骨组织工程支架材料研究进展*

骨在组织工程中得到了非常广泛、深入的研究.支架材料与许多可降解材料一起也在进行探索性研究.用于骨组织工程的生物材料可以是三维多孔的刚硬材料,也可以是可注射材料.本文从聚合物角度综述了骨组织工程对支架材料的基本要求,用于骨组织工程的可降解生物材料、支架材料的设计和制备技术以及支架材料的表面修饰等方面的研究进展.     

Fabrication of cellulose-based scaffold with microarchitecture using a leaching technique for biomedical applications

Providing a conclusive microenvironment for cell growth, proliferation and differentiation is a major developmental strategy in the tissue engineering and regenerative medicine. This is usually achieved in the laboratory by culturing cells in three-dimensional polymer-based scaffolding materials. Here, we describe the fabrication of a cellulose scaffold for tissue engineering purposes from cellulose fiber using a salt leaching method. The 1-n-allyl-3-methylimidazolium chloride (AmimCl) IL was used as a solvent for cellulose. The leaching methodology used in this study offers the unique advantage of providing effective control of scaffold porosity by simply varying cellulose concentration. Morphologic testing of the scaffolds produced revealed pore sizes of 200–500 μm. In addition, the scaffolds had high water adsorption rates and slow degradation rates. To further investigate the suitability of these scaffolds for tissue engineering applications, biocompatibility was checked using an MTT assay and confirmed by Live/Dead^® viability testing. In addition, scanning electron microscopy and DAPI studies and in vivo experiment demonstrated the ability of cells to attach to scaffold surfaces, and a biocompatibility of matrices with cells, respectively. The authors describe the environmentally friendly fabrication of a novel cellulose-based tissue engineering scaffold.     

Incorporation of nanohydroxyapatite and vitamin D3 into electrospun PCL/Gelatin scaffolds: The influence on the physical and chemical properties and cell behavior for bone tissue engineering

Scaffold, an essential element of tissue engineering, should provide proper physical and chemical properties and evolve suitable cell behavior for tissue regeneration. Polycaprolactone/Gelatin (PCL/Gel)‐based nanocomposite scaffolds containing hydroxyapatite nanoparticles (nHA) and vitamin D3 (Vit D3) were fabricated using the electrospinning method. Structural and mechanical properties of the scaffold were determined by scanning electron microscopy (SEM) and tensile measurement. In this study, smooth and bead‐free morphology with a uniform fiber diameter and optimal porosity level with appropriate pore size was observed for PCL/Gel/nHA nanocomposite scaffold. The results indicated that adding nHA to PCL/Gel caused an increase of the mechanical properties of scaffold. In addition, chemical interactions between PCL, gelatin, and nHA molecules were shown with XRD and FT‐IR in the composite scaffolds. MG‐63 cell line has been cultured on the fabricated composite scaffolds; the results of viability and adhesion of cells on the scaffolds have been confirmed using MTT and SEM analysis methods. Here in this study, the culture of the osteoblast cells on the scaffolds showed that the addition of Vit D3 to PCL/Gel/nHA scaffold caused further attachment and proliferation of the cells. Moreover, DAPI staining results showed that the presence and viability of the cells were greater in PCL/Gel/nHA/Vit D3 scaffold than in PCL/Gel/nHA and PCL/Gel scaffolds. The results also approved increasing cell proliferation and alkaline phosphatase (ALP) activity for MG‐63 cells cultured on PCL/Gel/nHA/Vit D3 scaffold. The results indicated superior properties of hydroxyapatite nanoparticles and vitamin D3 incorporated in PCL/Gel scaffold for use in bone tissue engineering.     

Macroporous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) matrices for cartilage tissue engineering

Polymer scaffold systems consisting of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) were investigated for possible application as a matrix for the three-dimensional growth of chondrocyte culture. The PHBV scaffolds were fabricated by a compression moulding, thermal processing and salt particulate leaching method without using organic solvent. The porous structure of the scaffolds was investigated with an optical microscope (OM) and scanning electron microscope (SEM) and the porosity was calculated. Then, the chondrocytes were cultured on the PHBV scaffolds for lone time to investigate whether it can be applied to construct the cartilage tissue in vitro. The results showed that the chondrocytes maintained their activity, fully expressed their phenotype and produced the extracellular matrix after incubation in vitro on the scaffolds for 7 days. In addition, in the prolonged incubation time, the percent of chondrocytes in their nature round morphology increased with an increase in the incubation period and they could synthesize the type II collagen and cartilage-specific proteoglycans. All of these results showed that the PHBV scaffolds had the potential to be used as chondrocytes carrier for cartilage engineering.     

低热-高压法制备PLGA多孔支架及其体外降解研究

采用低热-高压法制备了聚(dl-丙交酯／乙交酯)75／25(PLGA75／25)组织工程多孔支架。该方法避免了使用有机溶剂，支架的孔隙率在90％以上，孔径大小分布均匀。多孔支架经过酒精处理后，支架表面产生许多微小的凹陷；用藻酸钙改性处理后，支架形态保持良好。两种处理都使支架的压缩强度有所增大，亲水性增强。虽然孔隙率高的支架降解速率稍慢，但其体外降解规律基本一致：特性粘数争力学强度衰减快，而质量损失较慢，降解6周后，支架的质量损失仅为3％左右；体外降解3周后，支架的形态保持良好，可望在细胞移植争组织修复的早期发挥支撑作用。     

Effect of starch content on the biodegradation of polycaprolactone/starch composite for fabricating in situ pore-forming scaffolds

Bone tissue engineering is an efficient approach to regenerating bone-related defects. The optimal scaffold used for bone tissue engineering must possess adequate porosity and suitable mechanical properties. This work described the development of a biodegradable polymeric composite based on polycaprolactone (PCL) and starch that can form a porous structure in situ. The scaffold exhibited the required mechanical properties at the initial stage of implantation by controlling in situ degradation and subsequent pore formation. PCL/starch (SPCL) scaffolds with 100/0, 70/30, and 50/50 ratios were developed. Degradation studies were performed in phosphate buffer saline (PBS) containing α-amylase or lipase at 37 °C for 4 weeks. Fourier-transform infrared spectroscopy was used to analyze chemical bonds and their changes after degradation. Differential scanning calorimetry was applied to determine the crystallinity and recrystallization of samples before and after degradation. Mass loss and starch release were observed during degradation, and the porosity of samples was measured by the ethanol replacement method. Morphology was further determined using scanning electron microscopy. Finally, variations in compressive strength and modulus during degradation and pore formation were also measured. The porosity of samples reached 45% after 1 month of degradation, and mechanical properties were still appropriate for human bone tissue. Reduction in mechanical property after mass loss, starch release and pore formation was controlled by the hydrogen bonding and recrystallization effect of PCL after degradation. Results suggested that SPCL composite had potential to form porous scaffold with adequate mechanical properties in situ and is promising for bone tissue engineering applications.     

The degradation of poly(vinyl acetate) as a material for design objects: A multi-analytical study of the Cocoon lamps. Part 2

After the systematic study of poly(vinyl acetate) degradation presented in part 1, this work reports results from the analysis of polymeric materials from five Italian design lamps from the 1960s made of the material known as cocoon. Micro- and non-destructive molecular spectroscopic techniques have been applied directly on the object surfaces using an optical fibre probe and through examination of micro-samples: the combined use of Fourier-transform infrared spectroscopy (FTIR), pyrolysis gas-chromatography/mass-spectrometry (py-GC/MS) and Fluorescence spectroscopy allowed the assessment of the material composition and the chemical modifications of the polymers related to on-going deterioration processes. Fluorescence spectroscopy proved particularly sensitive for the detection of variations in composition among lamps and between areas on the same object, and was used to classify objects in different groups using principal component analysis of excitation emission spectra. Specific degradation products have been mapped using FTIR on micro-samples. Moreover, the interpretation of the emission spectra of the studied polymeric lamps suggests that fluorescence spectroscopy can be used for non-destructive monitoring of the degradation of historical polymeric objects.     

A hybrid scaffold of poly(lactide-<Emphasis Type="Italic">co</Emphasis>-glycolide) sponge filled with fibrin gel for cartilage tissue engineering

The poly(lactide-co-glycolide)(PLGA) sponge fabricated by a gelatin porogen leaching method was filled with fibrin gel to obtain a hybrid scaffold for chondrocytes culture in vitro.The fibrin gel evenly distributed in the hybrid scaffold with visible fibrinogen fibers after drying.In vitro culture it was found that in the hybrid scaffold the chondrocytes distributed more evenly and kept a round morphology as that in the normal cartilage.Although the chondrocytes seeded in the control PLGA sponges showed similar proliferation behavior with that in the hybrid scaffolds,they were remarkably elongated,forming a fibroblast-like morphology.Moreover,a larger amount of glycosaminoglycans was secreted in the hybrid scaffolds than that in the PLGA sponges after in vitro culture of chondrocytes for 4 weeks.The results suggest that the fibrin/PLGA hybrid scaffold may be favorably applied for cartilage tissue engineering.     

Fabrication of porous 3-D structure from poly(l-lactide)-based nano-composite foams. Effect of foam structure on enzymatic degradation

To understand the effect of the foam structure on the enzymatic degradation and porous structure development, we have examined the enzymatic degradation of a poly(l-lactide) (PLLA)-based nano-composite foam having different cell density (microcellular and nanocellular), using proteinase-K as a degrading agent at 37 °C. The surface and cross-sectional morphologies of the foam recovered after enzymatic hydrolysis for different intervals were investigated by using scanning electron microscopic and mercury porosimetric analyses. The fabrication of porous three-dimensional structure for tissue engineering scaffolds and the degradation performance in nano-composite foams were discussed.     

Biomimetic polymer/apatite composite scaffolds for mineralized tissue engineering

The material surface must be considered in the design of scaffolds for bone tissue engineering so that it supports bone cells adhesion, proliferation and differentiation. A biomimetic approach has been developed as a 3D surface modification technique to grow partially carbonated hydroxyapatite (the bonelike mineral) in prefabricated, porous, polymer scaffolds using a simulated body fluid in our lab. For the rational design of scaffolding materials and optimization of the biomimetic process, this work focused on various materials and processing parameters in relation to apatite formation on 3D polymer scaffolds. The apatite nucleation and growth in the internal pores of poly(L-lactide) and poly(D,L-lactide) scaffolds were significantly faster than in those of poly(lactide-co-glycolide) scaffolds in simulated body fluids. The apatite distribution was significantly more uniform in the poly(L-lactide) scaffolds than in the poly(lactide-co-glycolide) scaffolds. After incubation in a simulated body fluid for 30 d, the mass of poly(L-lactide) scaffolds increased approximately 40%, whereas the mass of the poly(lactide-co-glycolide) scaffolds increased by about 15% (see Figure). A higher ionic concentration and higher pH value of the simulated body fluid enhanced apatite formation. The effects of surface functional groups on apatite nucleation and growth were found to be more complex in 3D scaffolds than on 2D films. Surprisingly enough, it was found that carboxyl groups significantly reduced the apatite formation, especially on the internal pore surfaces of 3D scaffolds. These findings are critically important in the rational selection of materials and surface design of 3D scaffolds for mineralized tissue engineering and may contribute to the understanding of biomineralization as well.SEM micrograph of a poly(L-lactide) scaffold.     

In vitro degradation and release behavior of porous poly(lactic acid) scaffolds containing chitosan microspheres as a carrier for BMP-2-derived synthetic peptide

To develop a novel tissue engineering scaffold with the capability of controlled releasing BMP-2-derived synthetic peptide, porous poly(lactic acid)/chitosan microspheres (PLA/CMs) composites containing different quantities of chitosan microspheres were prepared by a thermally induced phase separation method. FTIR analysis revealed that there were strong hydrogen bond interactions between the PLA and chitosan component. Introduction of less than 30% CMs (on PLA weight basis) did not remarkably affect the morphology and porosity of the PLA/CMs scaffolds. The compressive strength of the composite scaffolds increased from 0.48 to 0.66 MPa, while the compressive modulus increased from 7.29 to 8.23 MPa as the microspheres' contents increased from 0% to 50%. In vitro degradability investigation indicated that the dissolution of chitosan component was preferential than PLA matrix and the inclusion of CMs could neutralize the acidity of PLA degradation products. Compared with the rapid release from CMs, the synthetic peptide was released from PLA/CMs scaffolds in a temporally controlled manner, mainly depending on the degradation of PLA matrix. The promising microspheres based scaffold release system can be used to deliver bioactive factors for a variety of non-loaded bone regeneration and tissue engineering application.     

Porous poly(glycerol sebacate) (PGS) elastomer scaffolds for skin tissue engineering

Poly (glycerol sebacate) (PGS) elastomer scaffolds with different porosity for skin tissue engineering were fabricated via particulate leaching. The introduction of pores lowers the hydrophilicity but improves the water uptake capability of PGS. The gel content of PGS increases with the increase of salt mass ratio, but the degree of swelling goes the opposite way due to the existence of the porous structure. The degradation rate of PGS can be tailored and controlled by the porous structure, which is of great value for its applications in tissue engineering. The feasibility of these porous PGS scaffolds for skin tissue engineering was evaluated by seeding mouse dermal fibroblasts (MDFs) onto the scaffold. In vitro cell culture results indicate good attachment, proliferation and deep penetration of MDFs into porous PGS scaffolds, which confirms the excellent biocompatibility of these scaffolds.     

Polyester scaffolds with bimodal pore size distribution for tissue engineering

This paper presents a method for the preparation of porous poly(L-lactide)/poly[(L-lactide)-co-glycolide] scaffolds for tissue engineering. Scaffolds were prepared by a mold pressing-salt leaching technique from structured microparticles. The total porosity was in the range 70-85%. The pore size distribution was bimodal. Large pores, susceptible for osteoblasts growth and proliferation had the dimensions 50-400 microm. Small pores, dedicated to the diffusion of nutrients or/and metabolites of bone forming cells, as well as the products of hydrolysis of polyesters from the walls of the scaffold, had sizes in the range 2 nm-5 microm. The scaffolds had good mechanical strength (compressive modulus equal to 41 MPa and a strength of 1.64 MPa for 74% porosity). Scaffolds were tested in vitro with human osteoblast-like cells (MG-63). It was found that the viability of cells seeded within the scaffolds obtained using the mold pressing-salt leaching technique from structured microparticles was better when compared to cells cultured in scaffolds obtained by traditional methods. After 34 d of culture, cells within the tested scaffolds were organized in a tissue-like structure. Photos of section of macro- and mesoporous PLLA/PLGA scaffold containing 50 wt.-% of PLGA microspheres after 34 d of culture. Dark spots mark MG-63 cells, white areas belong to the scaffold. The specimen was stained with haematoxylin/eosin. Bar = 100 microm.     

The effect of block copolymer structure on the internalization of polymeric micelles by human breast cancer cells

The objective of this study was to assess the effect of hydrophilic/hydrophobic block chain lengths on the internalization of poly(ethylene oxide)-block-poly(varepsilon-caprolactone) (PEO-b-PCL) micelles by cancer cells. PEO-b-PCL block copolymers with varied PEO and PCL chain lengths were synthesized, assembled to polymeric micelles and loaded with a hydrophobic fluorescent probe (DiI) through a co-solvent evaporation method of physical encapsulation. The slow release of the fluorescent probe from the micellar structure was evidenced following DiI transfer to lipid vesicles. The extent of micellar uptake by cancer cells was investigated through their incubation with MCF-7 cells followed by measurement of the fluorescent emission intensity of DiI (lambda=550 nm) in separated lysed cells. Cellular internalization of polymeric micelles was confirmed by laser scanning microscopy. The mechanism of micellar uptake was investigated by pretreatment of MCF-7 cells with chlorpromazine and cytochalasin B. Encapsulation of DiI in PEO-b-PCL micelles lowered the extent and rate of hydrophobic probe internalization by cancer cells. For polymeric micelles with 5000 gmol(-1) of PCL and varied PEO molecular weights of 2000, 5000 and 13,000 gmol(-1), maximum uptake was observed at a PEO molecular weight of 5000 gmol(-1). For polymeric micelles with 5000 gmol(-1) of PEO and varied PCL molecular weights of 5000, 13,000 and 24,000 gmol(-1), maximum uptake was observed at 13,000 gmol(-1) of PCL. Chlorpromazine reduced the cellular uptake of PEO-b-PCL micelles independent from the block copolymer structure, pointing to the involvement of clathrin mediated endocytosis mechanisms in the uptake of polymeric micelles by cancer cells. Inhibition of cellular uptake of PEO-b-PCL micelles by cytochalasin B, on the other hand, was found to be dependent on the chemical structure of the core/shell forming blocks.     

Genipin‐crosslinked gelatin hydrogel incorporated with PLLA‐nanocylinders as a bone scaffold: Synthesis,characterization, and mechanical properties evaluation

Nowadays, despite remarkable progress in developing bone tissue engineering products, the fabrication of an ideal scaffold that could meet the main criteria, such as providing mechanical properties and suitable biostability as well as mimicking the bone extracellular matrix, still seems challenging. In this regard, utilizing combinatorial approaches seems more beneficial. Here, we aim to reinforce the mechanical characteristics of gelatin hydrogel via a combination of Genipin‐based chemical cross‐linking and incorporation of the poly l ‐lactic acid (PLLA) nanocylinders for application as bone scaffolds. Amine‐functionalized nanocylinders are prepared via the aminolysis procedure and incorporated in gelatin hydrogel. The nanocylinder content (0, 1, 2, 3, and 4 wt%) and cross‐linking density (0.1, 0.5, and 1 wt/vol%) are optimized to achieve suitable morphology, swelling ratio, degradation rate, and mechanical behaviors. The results indicate that hydrogel scaffold cross‐linking by 0.5 wt% of Genipin shows optimized morphological feathers with a pore size of around 300 to 500 μm as well as an average degradation rate (40.09% ± 3.08%) during 32 days. Besides, the incorporation of 3 wt% PLLA nanocylinders into the cross‐linked gelatin scaffold provides an optimized mechanical reinforcement as compressive modulus, and compressive strength show a 4‐ and 2.6‐fold increase, respectively. 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay indicates that the scaffold does not have any cytotoxicity effect. In conclusion, gelatin composite reinforced with 3 wt% PLLA nanocylinders cross‐linked via 0.5 wt/vol% Genipin is suggested as a potential scaffold for bone tissue engineering applications.     

Solvent-assisted room-temperature compression molding approach to fabricate porous scaffolds for tissue engineering

This study investigated the room-temperature compression molding/particle leaching approach to fabricate three-dimensional porous scaffolds for tissue engineering. Scaffolds with anatomical shapes (ear, joint, tube, cylinder) were made from biodegradable poly(D,L-lactide) and poly[(D,L-lactide)-co-glycolide]. The utility of this room-temperature compression approach comes from the effect of solvent assistance, but the tendency for post-molding scaffold shrinkage is a problem unique to this method and is thus examined with emphasis in this paper. Scaffold shrinkage was found to be tolerable under normal fabrication conditions with high salt contents, which is just what the preparation of highly porous scaffolds requires. Furthermore, the resultant porosities after salt leaching were measured as well as the initial scaffold shrinkages after solvent evaporation, and the relation between them was revealed by theoretical analysis and confirmed by comparison with experimental measurements. The pores were interconnected, and porosity can exceed 90%. The effects of porosity on the mechanical properties of porous scaffolds were also investigated. This convenient fabrication approach is a prospective method for the tailoring of porous scaffolds for a variety of possible applications in tissue engineering and tissue reconstruction.     

A comparative study of the in vitro degradation of poly(l-lactic acid)/β-tricalcium phosphate scaffold in static and dynamic simulated body fluid

Porous poly(l-lactic acid)/β-tricalcium phosphate (PLLA/β-TCP) composite is a new promising scaffold for bone tissue engineering. Porous scaffolds fabricated by liquid anti-solvent precipitation principle were subjected to degradation in dynamic simulated body fluid (DSBF) and in static simulated body fluid (SSBF) at 37 °C for 24 weeks, respectively. Results indicated that a large number of apatite layer were formed on the scaffolds. The results further indicated that SBF flow decreased the degradation rate of molecular weight and compressive strength significantly. The porosity and mass changes were related to the apatite formation and SBF flow. All the results might be owed to the mutual effects of the flow of SBF and the addition of β-TCP. The degradation rate of scaffolds could be adjusted by the additional fraction of β-TCP to meet the requirements of application in vivo.     

Novel 3D Neuron Regeneration Scaffolds Based on Synthetic Polypeptide Containing Neuron Cue

Neural tissue engineering has become a potential technology to restore the functionality of damaged neural tissue with the hope to cure the patients with neural disorder and to improve their quality of life. This paper reports the design and synthesis of polypeptides containing neuron stimulate, glutamic acid, for the fabrication of biomimetic 3D scaffold in neural tissue engineering application. The polypeptides are synthesized by efficient chemical reactions. Monomer γ‐benzyl glutamate‐N‐carboxyanhydride undergoes ring‐opening polymerization to form poly(γ‐benzyl‐l ‐glutamate), then hydrolyzes into poly(γ‐benzyl‐l ‐glutamate)‐r‐poly(glutamic acid) random copolymer. The glutamic acid amount is controlled by hydrolysis time. The obtained polymer molecular weight is in the range of 200 kDa for good quality of fibers. The fibrous 3D scaffolds of polypeptides are fabricated using electrospinning techniques. The scaffolds are biodegradable and biocompatible. The biocompatibility and length of neurite growth are improved with increasing amount of glutamic acid in scaffold. The 3D scaffold fabricated from aligned fibers can guide anisotropic growth of neurite along the fiber and into 3D domain. Furthermore, the length of neurite outgrowth is longer for scaffold made from aligned fibers as compared with that of isotropic fibers. This new polypeptide has potential for the application in the tissue engineering for neural regeneration.