Sol-gel synthesis of nanocomposite crystalline HMX/AP coated by resorcinol-formaldehyde

This work aims to improve the performance of composite explosive by using the sol-gel method to mix high explosive and oxidizer in nanoscale. Nanocomposite materials of HMX and AP were prepared by using resorcinol-formaldehyde (RF) as binder. Its structure was characterized by scanning electron microscopy (SEM), BET method, X-ray powder diffraction (XRD), and DSC. SEM images indicate that HMX/AP/RF aerogel has a laminate-like structure with uniform pores. The XRD results show that the mean crystal size of HMX is less than 100 nm; HMX and AP are mixed uniformly in nanoscale. The specific surface area of HMX/AP/RF is 27 m²/g and much less than that of RF aerogel. The mesopores and micropores of HMX/AP/RF aerogel mainly focus in the range of 2-20 and 0.6-1.6 nm, respectively. DSC analysis indicates that the thermal decomposition temperature of HMX/AP/RF is reduced compared to that of original HMX.     

Low-temperature preparation of anatase titania-coated magnetite

A composite photocatalyst with an anatase titania shell and a magnetite core was prepared in a novel way at low temperature (75 °C at most) by coating photoactive titanium dioxide onto a magnetic Fe₃O₄ core. The photocatalytic activity of the prepared photocatalyst was evaluated by the degradation of model contaminated water of phenol and compared to single-phase titania (either Degussa P25 or prepared titania without magnetic Fe₃O₄). The results showed that the photoactivity was slightly depressed. Then, a remarkable improvement in photoactivity was achieved by modifying the photocatalyst with a SiO₂ layer between the Fe₃O₄ core and TiO₂ shell. The repetitive using of the modified photocatalyst was also investigated, and experimental results illustrated that the photocatalytic-degraded ratio of phenol was still higher than 80% after six cycles.     

Preparation and characterization of cerium oxide doped TiO2 nanoparticles

A mixed oxide consisting of TiO₂ as the major phase and CeO_2−y (0<y<0.5) as the dopant phase was prepared via the sol-gel reaction of Ti(i-OC₃H₇)₃ in an aqueous solution of Ce(NO₃)₃. The resulting oxide powders with different CeO_2−y contents were all composed of nano-sized spheres. The CeO_2−y phase was identified to have retarding effect on the phase transition from anatase TiO₂ to rutile TiO₂ at calcinations temperature as high as 800 °C, which would otherwise be a thorough conversion. The CeO_2−y-TiO₂ powders could apparently shift the UV-absorption band of TiO₂ toward visible range, and there was an optimal CeO_2−y content in association with the maximum absorbance. This effect is interpreted as the existence of an n-type impurity band, due to the substitution of Ti⁴⁺ for Ce^3+/4+ at the interface between the two oxides, in the gap of TiO₂. According to X-ray photoelectron spectroscopy (XPS) investigation, the Ti element mainly existed as the chemical state of Ti⁴⁺ and the Ce oxide doping did not affect the peak position of Ti 2p. The Ce 3d spectrum of CeO_2−y-doped TiO₂ sample basically denotes a mixture of Ce^3+/4+ oxidation states giving rise to a myriad of peaks.     

Structural characterization of nanocrystalline CrOOH·2H2O aerogel by X-ray diffraction

The nanostructured powder prepared by critical CO₂ extraction of the urea-assisted wet chromia gel mixture at 373 K in vacuum was studied by X-ray diffraction techniques. Thermoanalytical methods showed the presence of the lattice water molecules in the resulting phase corresponding to a chemical formula CrOOH·2H₂O. The CrOOH·2H₂O nanocrystals of 3-5 nm in diameter were observed in transmission electron microscopy and their structure was derived from the Rietveld analysis in which the disorder contribution to the X-ray scattering was implemented. The structural model shows that the hexagonal unit cell of α-CrOOH undergoes monoclinic distortion with half of the O⁻² anions and OH⁻ groups being replaced by bonded water molecules in the three-dimensional packing resulting in half of the sites in regular Cr⁺³ octahedra being vacant. Further examination of the quasi-crystalline disordered state of the CrOOH·2(H₂O) nanocrystals was performed by model independent method of Radial Distribution Function (RDF). This complementary technique is sensitive to the molecular composition and allows to assess the average atomic (or electron) density distribution and the spacings of the atomic arrangements in the nearest neighbor shells comprising the range of the crystalline order in the structure of this material.     

Nano-sized silica hollow spheres: Preparation, mechanism analysis and its water retention property

In this article, synthesis of nano-sized silica hollow spheres applying positive charged polystyrene as sacrificial templates was introduced. Firstly, nano-sized polystyrene particles were synthesized by emulsifier-free emulsion polymerization under solvothermal condition. Secondly, silica hollow nanospheres were formed through a simultaneous ‘coating-etching’ process. PVP played a key role in the evolution of nano-sized hollow spheres even if the templates were positive charged and the formation mechanism was different from that of previous studies. TEM results revealed that the morphologies of nano-sized silica hollow spheres not only strongly relied on the amount of reactant, but also the sequence of adding them. TGA illustrated that the interiors of nano-sized silica hollow spheres were not completely ‘hollow’. Brunauer-Emmett-Teller (BET) analysis showed that this material had a specific area of 399 m²/g. The water retention property of the materials was also investigated.     

X-ray diffraction analysis of the effect of annealing temperature on the microstructure of magnesium oxide nanopowder

In this study, nanocrystalline MgO powders were prepared using the sol-gel method and annealed in air over a temperature range of [400–700] °C. Various microstructural characteristics were determined using three different X-ray diffraction analysis approaches, i.e., modified Williamson-Hall, modified Warren-Averbach, and variance methods. The transmission electron microscopy micrographs were used to measure the size distributions of the MgO samples. The results obtained using the three different methods were in good agreement. At all temperatures, the main source of dislocation was edge type but as the annealing temperature increased, the crystallite size and dislocation density increased and decreased, respectively, thereby indicating that the crystal quality of the nanopowders was improved.     

The reaction kinetics of NiCl2 in silica-alumina gel matrix

Insitu isothermal reduction of NiCl₂ by dextrose in silica-alumina gel matrix has been carried out between 800 and 950 °C under nitrogen atmosphere. The predominant mechanism of reaction is found to be nucleation and growth. X-ray diffraction (XRD) analyses of reacted samples confirm the presence of metallic Ni, nickel aluminate and finely dispersed alumina in the reacted samples. The average particle size of nickel has been determined by transmission electron micrograph (14 nm) as well as XRD (17±2 nm).     

Hydrothermal synthesis and characterization of nanocrystalline Zn-Mn spinel

Hydrothermal method had been used to successfully synthesize the nanocrystalline spinel zinc manganese oxide (ZnMn₂O₄) directly from Zn(CH₃COO)₂·2H₂O, NaOH, Mn(NO₃)₂ and H₂O₂ at 170 °C for the reaction time of 48 h. The effects of the synthesis conditions, such as the Zn/Mn molar ratio, the reaction temperature, the reaction time, the zinc source and the concentrations of NaOH and H₂O₂, on the formation of the Zn-Mn spinel were investigated. The products were characterized by means of X-ray diffraction (XRD), inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The results indicated that the compositions of the Zn-Mn spinel with the tetragonal structure were Zn_1.14Mn_1.86O₄. Scanning electron microscope (SEM) and transmission electron microscopy (TEM) images showed that the products at 170 °C were with square-shaped nanocrystalline spinel with the particle size of about 20-50 nm. The thermal behaviors of the products were investigated by thermogravimetric analysis (TG).     

Effect of electric-field-assisted thermal treatment on the strain and ferroelectric properties of (100)-oriented ferroelectric Pb(Zr0.52Ti0.48)O3 thin films

Ferroelectric Pb(Zr_0.52Ti_0.48)O₃ thin films were deposited on the Pt/Ti/SiO₂/Si substrate by a sol-gel method. As a direct electric field was applied on the films during thermal treatment, strain behavior and ferroelectric properties have been investigated. X-ray diffraction patterns show that great tensile strain exists nearby the interface of the 250 nm thin film while thermal treatment assisted with direct electric field can obviously relax it. The analysis of hysteresis loops indicates that the remnant polarization increases with the thermal treatment time. These results suggest that electric-field-assisted thermal treatment is an effective way to reduce films' tensile strain through the local plastic deformation in Pt layer and enhance the remnant polarization.     

Doping effect of Mn on the magnetic behavior in Ni-Zn ferrite nanoparticles prepared by sol-gel auto-combustion

The ferrite samples of a chemical formula Ni_0.5−xMn_xZn_0.5Fe₂O₄ (where x=0.0, 0.1, 0.2, 0.3, 0.4, and 0.5) were synthesized by sol-gel auto-combustion method. The synthesized samples were annealed at 600 °C for 4 h. An analysis of X-ray diffraction patterns reveals the formation of single phase cubic spinel structure. The lattice parameter increases linearly with increase in Mn content x. An initial increase followed by a subsequent decrease in saturation magnetization with increase in Mn content is observed showing inverse trend of coercivity (H_c). Curie temperature decreases with increase in Mn content x. The initial permeability is observed to increase with increase in Mn content up to x=0.3 followed by a decrease, the maximum value being 362. Possible explanation for the observed structural, magnetic, and changes of permeability behavior with various Mn content are discussed.     

Preparation and characterization of carbamoylphosphonate(CMPO) silane grafted on various mesoporous silicas

The carbamoylphosphosphonate silane (CMPO analogue; 2-(diphenylphosphoryl)-N-(3-(triethoxysilyl)propyl) acetamide) modified mesoporous silica was prepared via a post-synthesis grafting method for the effective purification of rare earth elements. The guest CMPO analogue was synthesized by direct coupling reaction of 2-(diphenylphosphoryl) acetic acid and 3-(triethoxysilyl)propan-1-amine. Various mesoporous silicates such as MCM-41, SBA-15, or amorphous silica nanoparticles were adopted as host materials. The resulting surface-modified mesoporous materials were characterized with respect to their structural integrity, surface area, and pore size and the concentration of the CMPO silane species. These CMPO functionalized periodic mesostructured silicates offer the potential of applications as catalysts, sensors, or environmental sorbents.     

Synthesis and characterization of room-temperature ferromagnetism in Fe- and Ni-co-doped In2O3

Observation of room-temperature ferromagnetism in Fe- and Ni-co-doped In₂O₃ samples (In_0.9Fe_0.1−xNi_x)₂O₃ (0?x?0.1) prepared by citric acid sol-gel auto-igniting method is reported. All of the samples with intermediate x values are ferromagnetic at room-temperature. The highest saturation magnetization (0.453 μ_B/Fe+Ni ions) moment is reached in the sample with x=0.04. The highest solubility of Fe and Ni ions in the In₂O₃ lattice is around 10 and 4 at%, respectively. The 10 at% Fe-doped sample is found to be weakly ferromagnetic, while the 10 at% Ni-doped sample is paramagnetic. Extensive structure including Extended X-ray absorption fine structure (EXAFS), magnetic and magneto-transport including Hall effects studies on the samples indicate the observed ferromagnetism is intrinsic rather than from the secondary impurity phases.     

Synthesis of nanocrystalline ZnTiO3 perovskite thin films by sol-gel process assisted by microwave irradiation

Nanocrystalline ZnTiO₃ thin films have been grown on Si (1 0 0) at room temperature by using simple, cost effective sol-gel process assisted by microwave irradiation for thermal treatment. For comparison purpose the deposited films have subjected to two kinds of annealing treatments: first set by using conventional annealing and second set by irradiating the deposited films at different microwave powers for 10 min. In both treated films, formation of cubic phase ZnTiO₃ structure has been observed. It is evident that there is a dramatic structural modification when the deposited films are exposed to microwave. It is evident that there is a dramatic change in the morphological properties of the films irradiated in microwave compared to the conventional annealing temperature. Microwave exposed films have shown 19% of Zn, 19% of Ti and 62% of O in the films close to the stiochiometry of the ZnTiO₃, where as annealed films have shown 18% of Zn, 17.5% of Ti, and 64.5% of O in the films of ZnTiO₃. Plausible mechanism for the formation of cubic phase of ZnTiO₃ at low microwave powers has also been discussed. This new innovative microwave heating could open a door for the advanced technologies to cut down the process cost in post treatment of the materials.     

Elastic behaviour of strontium-doped lanthanum calcium manganites in the vicinity of TC

Colossal magnetoresistance (CMR) manganites with compositional formula, La_0.67Ca_0.33−xSr_xMnO₃ (where x=0, 0.09, 0.11, 0.13, 0.33) were prepared by citrate gel route mainly to understand the elastic behaviour in the vicinity of their magnetic transition temperature T_C. The structural characterizations of all the materials clearly indicate that samples upto x=0.13 doping, are having orthorhombic structure with Pbnm space group and sample with x=0.33 is having rhombohedral structure with space group. The magnetic transition temperatures (T_C) are determined by AC susceptibility measurements and are found to increase continuously with increasing strontium concentration. Finally, a systematic investigation of the ultrasonic longitudinal velocities of all the samples was carried out. Further, all the samples are found to exhibit anomalous behaviour in the vicinity of their magnetic transition temperatures and the observed behaviour is explained using Landau's theory.     

Synthesis, characterization and antibacterial action of hollow titania spheres

Hollow titania spheres were synthesized using the cationic polystyrene lattices which were prepared by polymerization in suspension of styrene using 2,2′-azobis (2-methylpropionamidine) dihydrochloride (AMPA) as an initiator. These cationic colloidal particles were dispersed in absolute ethanol in the presence of poly(vinylpyrrolidone) (PVP), solution of sodium chloride (NaCl) and mixed with ethanolic solutions of titanium tetraisopropoxide (TTIP). Subsequently, hollow spheres of titania compounds were obtained by calcinations of the so-coated polystyrene lattices at elevated temperature in air. The hollow titania spheres were characterized with scanning electron microscopy (SEM), FT-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). Moreover, antibacterial action of illuminated hollow titania spheres on pure culture of Escherichia coli (E. coli) was studied. A decrease of E. coli concentration was observed after illumination of bacteria in the presence of hollow titania spheres.     

Structural and luminescence characterization of synthetic Cr-doped Ni3(PO4)2

Ni_3–xCr_2x/3(PO₄)₂ (x=0 and 0.02) microcrystalline powders were obtained as single phases via a modified sol–gel Pechini-type in situ polymerizable complex method. The samples were characterized using scanning electron microscopy, X-ray diffraction, cathodoluminescence (CL), and thermoluminescence (TL) techniques. We found that Cr³⁺ doping modified the average particle and distribution. The mean particle size was 0.441 μm for Ni₃(PO₄)₂ and 0.267 μm for Ni_2.98Cr_0.013(PO₄)₂. The results also reveal that Cr³⁺ doping notably enhanced the CL and TL UV-blue emission.     

Nanocrystalline Sr2FeMoO6 prepared by citrate-gel method

Double perovskite Sr₂FeMoO₆ powders with small crystallite size have been synthesised with citrate-gel method. The starting solution pH was varied between 1.5 and 9.0 resulting in large differences in the phase composition and ordering of B^′/B^″ sites. The samples prepared at 975 °C had crystallite sizes under 40 nm whereas crystallite sizes of the samples prepared at 1050 °C were between 78 and 239 nm. The XRD patterns were refined with spacegroup I 4/m, which gave good results for both batches, although clearly better results were obtained with monoclinic P 2₁/n spacegroup for the 975 °C batch. The ordering and the saturation magnetization agreed well with each other after treatment at 1050 °C, but the samples prepared at 975 °C had a strongly reduced saturation magnetization from that given by the ordering.     

Preparation, electrical and gas-sensing properties of perovskite-type La1−xMgxFeO3 semiconductor materials

The La_1−xMg_xFeO₃ powder was prepared by sol-gel method using citric acid. The compounds crystallized were perovskite phase with orthorhombic structure. The Mg-doping restrains the growth of the grain size. The conductivity and gas sensing of La_1−xMg_x FeO₃-based sensors were investigated. We found the La_0.92Mg_0.08 FeO₃-based sensors have the best response and selectivity to ethanol gas. Great differences on the conductance-temperature curves of La_0.92Mg_0.08 FeO₃-based sensors between in ethanol gas and air or other gas such as H₂, CO and CH₄ were also found. The conductance in ethanol gas decreased with temperature from 130 to 240 °C. But in air and other gas such as H₂, CO and CH₄ the conductance increases all the time. It indicates that at 240 °C the conductance difference between air and ethanol was the biggest and the response reach the maximum.     

Electrochemical behaviour of nano-sized spinel LiMn2O4 and LiAlxMn2−xO4 (x=Al: 0.00-0.40) synthesized via fumaric acid-assisted sol-gel synthesis for use in lithium rechargeable batteries

Pristine spinel LiMn₂O₄ and LiAl_xMn_2−xO₄ (x=Al: 0.00-0.40) with sub-micron sized particles have been synthesized using fumaric acid as chelating agent by sol-gel method. The synthesized samples were subjected to thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and cyclic voltammetry (CV) and galvanostatic cycling studies. The TGA curve of the gel shows several weight-loss regions stepwise amounting to 55% till 800 °C attributed to the decomposition of the precursors. Calcination to higher temperatures (800 °C) yields pure-phase spinel (LiAl_xMn_2−xO₄), as it is evident from the high-intensity XRD reflections matching to the standard pattern. SEM and TEM studies confirm that the synthesized grains are of uniform regular surface morphology. FT-IR studies show stretching and bending vibration bands of Li-O, Li-Al-Mn-O. LiAl_0.1Mn_1.90O₄ spinel was found to deliver discharge capacity of 139 mA h/g during the first cycle with columbic efficiency of 97%. LiAl_0.1Mn_1.90O₄ spinel exhibits the high cathodic peak current indicating better electrochemical performance. Low doping (x=0.1) of Al is found to be beneficial in stabilizing the spinel structure.     

Elaboration and characterization of TiO2 nanoparticles incorporated in SiO2 host matrix

Nanometer-scale TiO₂ particles have been synthesized by sol-gel method. It was incorporated in a glass-based silica aerogel. The composite was characterized by various techniques such as particle size analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and photoluminescence (PL). The bulk glass presents a strong luminescence at wavelengths ranging from 750 to 950 nm. This PL was attributed to various non-bridging oxygen hole centers (NBOHCs) defects resulting from thermal treatment and crystallization of TiO₂ at the interface between titania nanoparticles and silica host matrix.