Preparation and characterization of nitrogen-doped TiO2 nanoparticles by the laser pyrolysis of N2O-containing gas mixtures

Nitrogen-doped TiO₂ nanoparticles have been prepared by the IR laser pyrolysis technique. A sensitized mixture of TiCl₄ (vapors) and N₂O was used as titanium and nitrogen precursors, respectively. The structural properties of the resultant N-doped nanoparticles such as the phase formation and the average particle size and distributions were investigated by X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. The phase composition varied from almost pure anatase to mixtures of rutile and anatase. A decrease of the mean particle diameters from about 18 nm in case of the almost pure anatase sample to about 13 nm in case of the anatase-rutile mixture is observed. XPS analysis suggests and interstitial character of the doping process.     

Surface-initiated atom transfer radical polymerization from TiO2 nanoparticles

Two kinds of hydrophilic polymers, poly(oxyethylene methacrylate) (POEM) and poly(styrene sulfonic acid) (PSSA), were grafted from TiO₂ nanoparticles via the surface-initiated atom transfer radical polymerization (ATRP) technique. Chlorine modified TiO₂ nanoparticles (TiO₂-Cl), the ATRP initiators, were synthesized by the reaction of -OH in TiO₂ with 2-chloropropionyl chloride (CPC). FT-IR, UV-vis spectroscopy and X-ray photoelectron spectroscopy (XPS) clearly showed that the polymer chains were successfully grafted from the surface of TiO₂ nanoparticles. The hydrophilically modified TiO₂ nanoparticles have a better dispersion in alcohol than unmodified nanoparticles, as revealed by transmission electron microscopy (TEM). It was also found that the polymer grafting did not significantly alter the crystalline structure of the TiO₂ nanoparticles according to the X-ray diffraction (XRD) patterns. Grafting amounts were 10% of the weight for both TiO₂-POEM and TiO₂-PSSA nanoparticles, as determined by thermogravimetric analysis (TGA).     

Enhanced photocatalytic degradation of Safranin-O by heterogeneous nanoparticles for environmental applications

Nanostructure titanium dioxide (TiO₂) has been synthesized by hydrolysis of titanium tetrachloride in aqueous solution and Ag-TiO₂ nanoparticles were synthesized by photoreduction method. The resulting materials were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier-transform infrared (FT-IR) and UV-vis absorption spectroscopy. The experimental results showed that the sizes of the synthesized TiO₂ and Ag-TiO₂ particles are in the range of 1.9-3.2 nm and 2-10 nm, respectively. Moreover, Ag-TiO₂ nanoparticles exhibit enhanced photocatalytic activity on photodegradation of Safranin-O (SO) dye as compared to pure TiO₂. The positive effect of silver on the photocatalytic activity of TiO₂ may be explained by its ability to trap electrons. This process reduces the recombination of light generated electron-hole pairs at TiO₂ surface and therefore enhances the photocatalytic activity of the synthesized TiO₂ nanoparticles. The effects of initial dye and nanoparticle concentrations on the photocatalytic activity have been studied and the results demonstrate that the dye photodegradation follows pseudo-first-order kinetics. The observed maximum degradation efficiency of SO is about 60% for TiO₂ and 96% for Ag-TiO₂.     

Titanium dioxide-coated nanofibers for advanced filters

This article reports on titanium dioxide (TiO₂)-coated nanofibers deposited on a filter surface by the electrospinning process. After depositing a micrometer-thick film of polyamide 11 nanofibers on polypropylene fabric, TiO₂ nanoparticles can be directly electrosprayed onto the nanofibers. X-ray diffraction and Raman spectroscopy showed minimal change in the phase composition (anatase and rutile) and no change in the particle size of nanocrystalline TiO₂ after coating. Scanning electron microscopy demonstrated that nanofibers were uniformly coated by titanium dioxide nanoparticles without agglomeration. TiO₂-coated filters showed excellent photocatalytic-bactericidal activity and photo-induced hydrophilicity.     

Structural and polarization properties of polyimide/TiO2 nanocomposites

Polyimide (PI)/titanium dioxide (TiO₂) nanocomposite films were prepared by a solution mixing method with different contents of TiO₂ nanoparticles. The structural and thermal properties of pure PI and PI/TiO₂ nanocomposite films were studied by several techniques such as scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermally stimulated depolarization current (TSDC). The SEM and AFM measurements show the uniform dispersion of TiO₂ nanoparticles in PI matrix, and it is also observed that the value of average roughness increases with increasing the contents of TiO₂ nanoparticles. The XRD pattern shows the presence of TiO₂ nanoparticles in PI matrix. It has been observed that the average crystallite size and percentage of crystallinity increase with content of the TiO₂ nanoparticles. FTIR spectra depict the position of different bonds in PI and nanocomposite samples. The TSDC results represent the modification of polarization phenomenon after filling of PI by titania nanoparticles.     

Effect of Ag doping on the crystallization and phase transition of TiO2 nanoparticles

TiO₂ nanoparticles doped with different Ag contents were prepared by a modified sol–gel method, using titanium tetraisopropoxide and silver nitrate as precursors and 2-propanol as solvent. Silver was incorporated into the TiO₂ matrix via decomposition of AgNO₃ during thermal treatment in different atmospheres. Effects of Ag doping on the crystallization and phase transition of the TiO₂ nanoparticles were studied using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Raman spectroscopy techniques. While air annealing incorporates silver into TiO₂ matrix in silver oxide form, annealing in nitrogen incorporates metallic silver into TiO₂. Formation of silver oxide increases the thermal stability of the TiO₂ particles. Silver oxide affects the crystallization process of TiO₂ particles and the temperature of transition form anatase to rutile. On the other hand, presence of metallic silver in the samples annealed in nitrogen atmosphere decreases the temperature of phase transition of TiO₂ nanoparticles.     

Preparation of nitrogen-doped titanium dioxide with visible-light photocatalytic activity using a facile hydrothermal method

Nitrogen-doped TiO₂ (N-TiO₂) nanoparticles have been successfully prepared via a direct and simple hydrothermal reaction of a commercial Degussa P25 with triethanol amine as solvent and nitrogen source. As-prepared N-TiO₂ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible light (UV-vis) absorption spectra, electron probe microanalysis (EPMA) and X-ray photoelectron spectroscopy (XPS) techniques. The results confirm that hydrothermal reaction is an effective way to incorporate nitrogen into the TiO₂ lattice, especially nitrogen substitute for titanium. The nitrogen concentration in TiO₂ can be as high as 21% (molar ratio), which is described as Ti_1−yO_2−xN_x+y (in this paper, x=0.36, y=0.27, i.e., Ti_0.73O_1.64N_0.63). The chemical statuses of N have been assigned to N-Ti-O and O-N-O in the TiO₂ lattice as identified by XPS. Photocatalytic degradation of methyl orange has been carried out in both UV-vis (simulated solar light) and the visible region (λ>400 nm). N-TiO₂ exhibits higher activity than the Degussa P25 TiO₂ photocatalyst, particularly under visible-light irradiation. This study has developed a promising and practical pathway to new nitrogen-doped photocatalysts.     

Photostabilization of dye on anatase titania nanoparticles by polymer capping

Nanoparticles of titanium dioxide (TiO₂) were prepared by the sol-gel method and characterized by XRD, TEM, FTIR and UV-Visible absorption spectroscopy for their structure, morphology and particle size. Organization, stabilization of the nanoparticles of TiO₂ from further growth, and partially inhibiting the photodegradation was achieved by capping with polymers. Photodegradation of dye on TiO₂ nanoparticles encapsulated in different polymers has been studied by diffused reflectance UV spectroscopy. The role of the polymer on the photodegradation of TiO₂ has been compared and explained.     

Effect of ambient pressure on the crystalline phase of nano TiO2 particles synthesized by a dc thermal plasma reactor

The synthesis of nanoparticles of titanium dioxide (TiO₂) with varying percentages of anatase and rutile phases is reported. This was achieved by controlling the operating pressure in a transferred-arc, direct current thermal plasma reactor in which titanium vapors are evaporated, and then exposed to ambient oxygen. The average particle size remained around 15 nm in each case. The crystalline structure of the as-synthesized nanoparticles of TiO₂ was studied with X-ray diffraction analysis; whereas the particle morphology was investigated with the help of transmission electron microscopy. The precursor species responsible for the growth of these nanoparticles was studied with the help of optical emission spectroscopy. As inferred from the X-ray diffraction analysis, the relative abundance of anatase TiO₂ was found to be dominant when synthesized at 760 Torr, and the same showed a decreasing trend with decreasing chamber pressure. The study also reveals that anatase TiO₂ is a more effective photocatalytic agent in degrading methylene blue by comparison to its rutile phase.     

TiO2 nanoparticle thin film deposition by matrix assisted pulsed laser evaporation for sensing applications

The MAPLE technique has been used for the deposition of nanostructured titania (TiO₂) nanoparticles thin films to be used for gas sensors applications. An aqueous solution of TiO₂ nanoparticles, synthesised by a novel chemical route, was frozen at liquid nitrogen temperature and irradiated with a pulsed ArF excimer laser in a vacuum chamber. A uniform distribution of TiO₂ nanoparticles with an average size of about 10 nm was deposited on Si and interdigitated Al₂O₃ substrates as demonstrated by high resolution scanning electron microscopy-field emission gun inspection (SEM-FEG). Energy dispersive X-ray (EDX) analysis revealed the presence of only the titanium and oxygen signals and FTIR (Fourier transform infra-red) revealed the TiO₂ characteristic composition and bond. A comparison with a spin coated thin film obtained from the same solution of TiO₂ nanoparticles is reported. The sensing properties of the films deposited on interdigitated substrates were investigated, too.     

Synthesis and characterization of composite Au/TiO2 nanoparticles by laser irradiation

Composite Au/TiO₂ nanoparticles were synthesized by laser ablation of gold plate in TiO₂ sol. The nanoparticles were characterized by UV-visible spectroscopy, transmission electron microscopy, X-ray diffraction, and atomic force microscopy. The peak of surface plasmon is at 550 nm with a red shift of 30 nm compared with that of Au nanoparticles in water. Monolayers of composite Au/TiO₂ nanoparticles were obtained by dip-coating technique. The XRD pattern of Au/TiO₂ powders resembles a mixture of anatase TiO₂ and gold.     

Synthesis and characterization of TiO2/Ag/polymer ternary nanoparticles via surface-initiated atom transfer radical polymerization

We report on the novel ternary hybrid materials consisting of semiconductor (TiO₂), metal (Ag) and polymer (poly(oxyethylene methacrylate) (POEM)). First, a hydrophilic polymer, i.e. POEM, was grafted from TiO₂ nanoparticles via the surface-initiated atom transfer radical polymerization (ATRP) technique. These TiO₂-POEM brush nanoparticles were used to template the formation of Ag nanoparticles by introduction of a AgCF₃SO₃ precursor and a NaBH₄ aqueous solution for reduction process. Successful grafting of polymeric chains from the surface of TiO₂ nanoparticles and the in situ formation of Ag nanoparticles within the polymeric chains were confirmed using transmission electron microscopy (TEM), UV-vis spectroscopy, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). FT-IR spectroscopy also revealed the specific interaction of Ag nanoparticles with the CO groups of POEM brushes. This study presents a simple route for the in situ synthesis of both metal and polymer confined within the semiconductor, producing ternary hybrid inorganic-organic nanomaterials.     

Formation of nanocrystalline TiO2 by 100 MeV Au

Nanocrystalline TiO₂ structures are formed by irradiation of 100 MeV Au⁸⁺ ion beam on amorphous thin films of TiO₂. Surface morphology of the nanocrystals is studied by Atomic Force Microscopy (AFM). Amorphous to nanocrystalline phase transformation is identified by Glancing Angle X-ray Diffraction (GAXRD) and Raman spectroscopic studies. Optical characterization is carried out by UV-VIS spectroscopy technique. Blue shift observed in absorption band edge indicates the formation of nanophase TiO₂ after irradiation. The impinging swift heavy ion (100 MeV Au⁸⁺) induces nucleation of nanoparticles along the ion trajectory through inelastic collisions of the projectile with electrons of the material. It is observed that the shape and size of nanoparticles formed is dependant on the irradiation fluence.     

Photocatalytic degradation of azo dyes using Zn-doped and undoped TiO2 nanoparticles

Undoped and Zn-doped TiO₂ nanoparticles were synthesized by the sol gel method. The dopant (Zn) was taken at 0.1, 0.2, 0.5, 0.7, and 1.0 mol%. The initial precursors were titanium tetraisopropoxide and zinc acetate. The samples were characterized by X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and UV–vis diffuse reflectance. The photocatalytic activity of the prepared nanoparticles was studied by observing their role in degradation of two azo dyes, i.e., Eriochrome Black T and Methyl Red under UV–visible light. The results revealed that Zn-doped TiO₂ nanoparticles exhibited better degradation as compared to undoped TiO₂ nanoparticles. In this study, 0.7 mol% Zn-doped TiO₂ showed highest photocatalytic activity. Doping of Zn allowed better separation of electron–hole pairs which results in increased oxidation and reduction reactions.     

Surface modification of PMMA/O-MMT composite microfibers by TiO2 coating

In the present work, poly(methyl methacrylate) (PMMA)/organically modified montmorillonite (O-MMT) composite microfibers were firstly prepared by emulsion polymerization combined with electrospinning, and then coated by nanosize titanium dioxide (TiO₂) using RF magnetron sputter technique. The modified surfaces of PMMA/O-MMT composite microfibers were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), UV-vis spectroscopy and drop shape analyzer. Finally, the photocatalytic properties of TiO₂ coated PMMA/O-MMT composite microfiber membranes were evaluated by degradation of methylene blue(MB) under UV illumination. The experimental results revealed that anatase-TiO₂ and rutile-TiO₂ nanoparticles were well spread and physically deposited on the surface of PMMA/O-MMT microfibers, and the wettability of the PMMA/O-MMT composite microfibers was improved after surface modification by sputter coating. Furthermore, the PMMA/O-MMT microfibers membrane coated with TiO₂ performed well in photocatalytic degradation of MB.     

Synthesis and application in solar cell of poly(3-dodecylthiophene)/titanium dioxide nanocomposite

A conducting polymer composite poly(3-dodecylthiophene)/titanium dioxide (P3DDT/TiO₂) nanocomposite was first synthesized through the ultrasonic method. The results from X-ray diffraction (XRD) and infrared spectroscopy (IR) show that there is chemical interaction in the composite. Transmission electron microscope (TEM) and scanning electron microscope (SEM) depict the morphology of the samples, defining that TiO₂ was successfully coated by poly(3-dodecylthiophene) molecules. The energy gap of the poly(3-dodecylthiophene)/titanium dioxide composite is lower to 0.76 eV compare with poly(3-dodecylthiophene) and titanium dioxide separately, and it also shows that the optical performance of the new material is far superior than P3DDT or TiO₂ separately by ultraviolet-visible spectra (UV) and fluorescence spectroscopy (PL). Solar cell was sensitized by P3DDT/TiO₂. A solar-to-electric energy conversion efficiency of 0.188% was attained with the system.     

Synthesis of CdSe and CdSe/TiO2 nanoparticles under multibubble sonoluminescence condition

CdSe and CdSe/TiO₂ nanoparticles were synthesized under multibubble sonoluminescence (MBSL) condition. The influences of TiO₂ introduced as the sensitizer on the morphology and crystal transformation were investigated. The morphology, phase and optical properties of the final products have been characterized by X-ray powder diffraction, transmission electron microscope, UV-vis absorption spectroscopy and photoluminescence spectroscopy. The results showed that as-prepared nanoparticles are well-crystallized, and the suppression of crystal pattern transition as well as the control of CdSe crystal growth can be implemented by coupling of TiO₂ semiconductor. Furthermore, the possible growth mechanism for different morphologies and crystal phases of the nanocrystals were also discussed.     

Effect of nano-titanium hydride on formation of multi-nanoporous TiO2 film on Ti

The effect of titanium hydride on the formation of nanoporous TiO₂ on Ti during anodization has been investigated by X-ray photoelectron spectroscopy, grazing incident X-ray diffraction, transmission electron microscopy and scanning electron microscopy. Titanium hydride (TiH₂) was formed after cathodization, profoundly impacting the formation of nanoporous TiO₂ on Ti by anodization. Oxide layer and nanocrystal structure were observed after anodization with cathodic pretreatments. A multi-nanoporous TiO₂ layer was formed on the titanium. The titanium hydride is a nanostructure. The nanostructure is directly changed to nanoporous TiO₂ by a dissolution reaction during anodization. The nanoporous layer is difficult to form without cathodization. The nanostructural TiH₂ is important in forming a nanoporous TiO₂ layer. Anodization treatment with cathodic pretreatment not only yields a titanium surface with a multi-nanostructure, but also transforms the titanium surface into a nanostructured titanium oxide surface.     

Secondary ion mass spectrometry and X-ray photoelectron spectroscopy studies on TiO2 and nitrogen doped TiO2 thin films

Anatase phase TiO₂ and nitrogen (N) doped TiO₂ thin films were synthesized by an ultrasonic spray pyrolysis technique on c-Si (100) substrates in the temperature range 300-550 °C. The former used a precursor solution of titanium oxy acetylacetonate in methanol whereas the later used a titanium oxy acetylacetonate hexamine mixture in methanol. Homogeneity across the film’s thickness and the nature of the film-substrate interface were studied by dynamic depth profiling acquired using secondary ion mass spectrometry SIMS. The stoichiometry and bonding state of various species present in the films were studied using X-ray photoelectron spectroscopy (XPS). N-doping was confirmed by both SIMS and XPS. XPS studies revealed that the nitrogen content of the films synthesized at 300 °C (3.2%) is high compared to that of films made at 350 °C (1.3%).     

Structure and optical properties of chemically synthesized titanium oxide deposited by evaporation technique

Titanium oxide inorganic ion exchange material was synthesized by hydrolysis with water and ammonia solution. Structural feature of the synthesized titanium oxide was analyzed using X-ray diffraction, X-ray fluorescence and infrared spectrometer technique. Tentative formula of titanium oxide was determined and written as TiO₂·0.58H₂O. Titanium oxide films were deposited on glass substrates by means of an electron beam evaporation technique at room temperature from bulk sample. The films were annealed at 250, 350, 450, and 550 °C temperatures. Transmittance, reflectance, optical energy gap, refractive index and extinction coefficient were investigated. The transmittance values of 85% in the visible region and 88% in the near infrared region have been obtained for titanium oxide film annealed at 550 °C. Kubelka-Munk function was used to evaluate the absorption coefficient which was used to determine the optical band gap. It was found that the optical band gap increases with increasing annealing temperature whereas the refractive index and extinction coefficient decreases.