On window size selection in the windowed Fourier ridges algorithm

The windowed Fourier ridges (WFR) algorithm can be used to extract the frequency and phase information from an exponential or carrier fringe pattern. The selection of the window size for this algorithm is investigated in this paper. For exponential phase fringe patterns, the window size does not need to be adjusted according to the signal frequency. Hence the scaling strategy of the wavelet transform is not necessary. Instead, the window size should be selected according to the balance between the linear phase approximation error and the noise level. For carrier fringe patterns, the influence of the conjugate component should also be considered. However it can be ignored when the lowest frequency of the fringe pattern is higher than 1.5/σ (σ is used to represent the window size).     

Discuss the measuring range of dual-frequency wavelet transform profilometry

We discuss the structure condition and sampling condition of wavelet transform profilometry (WTP) based on dual-frequency fringe pattern in this work. In the mentioned method a grating fringe with dual-frequency components is projected onto an object. And two wavelet ridge lines can be extracted by means of wavelet analysis, from which we can calculate two groups of wrapped phase information. Afterwards the retrieved phase with higher precision can be obtained through phase unwrapping process. However, it should be noted that the spectral aliasing of the deformed fringe pattern must be avoided in order to restore the correct phase information. And the two fringe carrier frequencies have to obey some rules as well. In this paper, the structure condition and sampling condition of the proposed method is deduced from the point of view of frequency analysis. It is proven that there would be no frequency overlapping in the deformed fringe pattern only when both of the two conditions mentioned previously are fulfilled. The results of computer simulations and experiments verify the validity of our theory.     

The separation of out-of-plane displacement from in-plane components by fringe carrier method based on large image-shearing ESPI

A fringe carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing electronic speckle pattern interferometry (ESPI) is presented. If the test object is respectively illuminated by two expanded symmetric illuminations in large image-shearing ESPI, two interferometers are formed. Carrier fringe patterns can be introduced by tilting reference surface a small angle. The carrier fringe patterns are demodulated after deformation of the object. Two phase maps, which include out-of-plane and in-plane displacement, can be obtained by using Fourier transform. Then out-of-plane displacement can be easily separated from in-plane displacement by simple operation between two unwrapped phase distributions. The principle of spatial carrier frequency modulation in large image-shearing ESPI is discussed. A typical three-point-bending experiment is completed. Experimental results are offered. The results show that the method offers high visibility of carrier fringes. And the system presented does not need a special beam as a reference light and has simple optical setup.     

Phase demodulation in the space domain without a fringe carrier

It is demonstrated that interference phase can be obtained from a fringe pattern using the spatial domain method known as spatial synchronous detection (direct interferometry) but without the usual fringe carrier (e.g. tilt) introduced into the interferometer. This is particularly useful in the study of transient events, where it is not always straightforward to introduce these carrier fringes. Spatial domain analysis is considerably faster than frequency domain (Fourier) methods, and could enable phase to be calculated in real time on relatively cheap personal computers. The main disadvantage of the new technique is that the sign of the recovered phase is lost, and must be inferred from object constraints.     

空间载频条纹相位分析法中的相位不确定性

分析了单频、双频空间载频光学条纹相位分析技术中的相位不确定性问题,提出采用两频率之比为无理数的双频载频条纹,相位可完全确定,并提出了基于两频率之比为无理数的空间载频条纹相位确定算法,给出了实验结果。     

A fringe carrier technique for unambiguous determination of fringe orders in shearography

Shearography is an interferometric method which measures displacement derivatives. This paper presents a technique which eliminates the ambiguity in shearographic fringe interpretation. The technique is based on generating a carrier fringe pattern. Introduction of the carrier fringes results in the formation of a fringe pattern which has monotonically increasing fringe orders, thus allowing fringe orders to be determined in a straightforward manner and without ambiguity. The phase change due to deformation alone is then obtained by simply subtracting the known undeformed carrier fringe orders from the deformed carrier fringe orders. Elimination of fringe ambiguity has paved a way for automatic data acquisition in shearography.     

基于复合光栅投影的快速傅里叶变换轮廓术

在实际傅里叶变换轮廓术测量中,获取条纹图的零频分量对傅里叶变换轮廓术的测量精度和测量范围有很大影响,甚至妨碍三维面形的正确重建。π相移技术常被用来消除零频分量对傅里叶变换轮廓术测量的影响,但它需要采集两帧具有π相位差的条纹图。这影响了傅里叶变换轮廓术测量方法的实时性。提出采用复合光栅投影来实现从一帧条纹图中消除零频对傅里叶变换轮廓术测量的影响,该复合光栅是由两个不同频率的载频分别调制与其方向垂直的两帧具有π相位差的条纹并叠加形成的。实验表明,同传统的π相移方法相比,提出的新方法没有明显降低π相移傅里叶变换轮廓术的的测量精度,因此能真正实现实时高速测量。     

基于希尔伯特变换的干涉条纹相位解调新算法

提出了一种新的应用希尔伯特变换解调干涉条纹相位的算法,可以从单幅干涉条纹图中解调出全场相位分布.在实际应用中,常借助傅里叶变换实现希尔伯特变换算法,但是会忽略负频率成分,造成相位信息的丢失.对于相位分布非单调变化的干涉条纹,提出了一种判断函数,用来计算相位信息零频率点的分布.利用相位的零频率点分布构造了一个二元模板,使用该模板对本文提出的两次希尔伯特变换法产生的包裹相位图进行修正.对修正后的包裹相位图进行解包裹处理,可以得到连续的全场相位分布.对该方法用计算机模拟进行了验证.     

High-speed fringe analysis by using stair-shaped virtual grating demodulation

This article describes a novel fringe analysis technique using stair-shaped virtual grating demodulation algorithm for extracting the phase information from a single fringe pattern. In contrast to the Fourier transform technique and quadrature multiplicative moire method, the new method processes a fringe pattern in the integer signal domain instead of the frequency domain and real-signal domain. The spatial carrier of fringe image is not limited to any particular frequency as long as it fulfills the sampling theorem. The errors analysis of this technique is conducted by computer simulation and experiments.     

A novel 3D measuring method for discontinuous object by non-integral twin-frequency grating

A new 3D shape measurement method based on non-integral twin-frequency grating projection is proposed. In this paper, the projected composite grating is composed of two sinusoidal gratings, and the quotient of whose frequencies is not an integer. By using appropriate phase-shifting algorithms, two wrapped phases can be obtained from sixteen frames of the distorted grating patterns. In aid of appropriate phase unwrapping method, the unwrapped phase of high frequency fringe is obtained only from the relation of the two wrapped phases by a pixel-to-pixel phase unwrapping technique. Therefore the unwrapped phase of high frequency fringe pattern is independent of the low frequency fringe pattern, different from traditional integral twin-frequency grating projection methods in which the phase unwrapping error of low frequency fringe pattern may be propagated onto the unwrapped phase of high frequency fringe pattern. The new theory proves that the proposed method is applicable to measure discontinuous object, and has considerable measurement accuracy.     

散斑干涉相位条纹图的频域滤波处理

为了解决在数字散斑干涉技术测量时,散斑干涉相位条纹图像中大量噪声对相位解包裹结果和精度产生严重影响的问题,介绍了一种条纹正余弦分解和频域低通滤波结合的方法,实现了散斑干涉相位条纹图的高精度滤波。该方法的基本思路是在对相位图像进行滤波处理前,先将相位图通过正余弦函数进行映射转换成两幅图,分别经过频域滤波,然后再合成为相位图。这种分解频域滤波方法可以在滤波的同时,有效保留相位跳变信息。实验结果表明：与传统的图像降噪方法相比,该方法能够在保留图像“尖峰”信息的基础上,较好地滤除图像中的散斑噪声,方法简单有效,有效解决了传统滤波方法应用在相位条纹图中,相图灰度信息丢失10%~40%的问题。     

大剪切电子散斑干涉的载频调制与位移场测量

将电子散斑干涉场的载波调制引入到大剪切电子散斑干涉中,通过对参考物的微小偏转引入载波条纹;利用傅里叶变换法,解调出了变形场的相位,从而实现了物体变形场的精确测量。讨论了大剪切载频的调制机理,理论分析表明,调制条纹的空间频率与参考面偏转的角度成正比;因此,控制参考面的偏转角度可实现不同位移量系统的调制。利用中心加载周边固定圆盘进行了典型实验,实验结果证明在大剪切电子散斑干涉技术中可以通过参考面的旋转高质量地实现电子散斑干涉条纹的调制,求解位移场。该系统具有系统简单,不需要专门引入参考光,条纹质量好等优点。该技术可扩展电子散斑干涉的应用范围,有一定的实际应用价值。     

一种基于傅里叶变换的分析载波条纹的新方法

针对传统傅里叶变换法处理光载波干涉条纹图时会有边缘效应产生的问题,提出了一种基于傅里叶变换法的外推延拓方法,并从理论上进行了数学推导。为了验证这种方法的正确性,分别对一维数字信号和二维空间载波条纹图进行了数值模拟,进一步分析了误差产生的原因,并与传统的傅里叶变换法对比。结果表明该法可以有效抑制传统傅里叶变换法处理光载波干涉条纹图时边缘效应所造成的较大误差,在基于空间域相位调制技术的波面干涉测量中,对空间载波条纹图进行处理,可以使相位的计算精度达到3.3 mrad。     

小波相位分析测量成像径向畸变

为了测量光学成像像面各个像素的径向畸变大小,提出将小波变换载频条纹相位分析应用于径向畸变测量。采用正弦载波条纹作为测量模板,把径向畸变转化为径向调制相位。应用条纹相位分析导出径向调制相位和径向畸变的转化关系。采用小波频率估计和相位估计提取变形条纹的相位,由于变形条纹中心点是零畸变,中心点的瞬时频率和相位可以计算参考条纹的基频相位。两种基频相位之差就是与所有像素径向位置畸变分布对应的三维调制相位——称为径向畸变分布。利用校正公式和立方卷积插值算法对彩色畸变图像进行校正,给出详细的理论分析和实验结果。     

The design of a non-cube beam-splitter used for electronic speckle pattern interferometry

A non-cube beam-splitter (NCBS) is proposed, by which an incident beam can be separated largely in a direction and then the lights from the test object and the lights from a reference surface placed adjacently to the test object can be combined to construct a simple electronic speckle pattern interferometry (ESPI) system. Two mainly useful quantitative ways, to calculate the phase change of the test object, the phase-shift and the fringe carrier method with Fourier transform, can be achieved in the ESPI system with the NCBS. Experiments with phase-shifting and fringe carrier method are completed. The experimental results show that the monolithic design of the proposed NCBS is effective in ESPI measurement and immunity to vibrations.     

Single-shot full-field interferometric polarimeter with an integrated calibration scheme

A simple interferometric polarimeter with an integrated calibration scheme is proposed for accurate and fast mapping of the state of polarization (SOP). Conventional single-shot polarimeters that detect the amplitude and phase of orthogonally polarized field components by interferometry using Fourier fringe analysis suffers from errors caused by the imperfect reference beam and ambiguity in the spatial carrier frequency in the fringe pattern. In the proposed system, the integrated calibration scheme eliminates those error sources and enables accurate measurement of SOP without prior knowledge of the reference beam and the spatial carrier frequency.     

基于调制方向提取载波散斑条纹中心线的方法

条纹中心线法是一种重要的电子散斑干涉条纹解调方法,其前提条件是获得高准确度的条纹中心线.本文在分析载波电子散斑干涉条纹自身特征的基础上,提出了一种基于载波条纹调制方向提取条纹中心线的方法.该方法首先通过同态滤波有效滤除高频乘性散斑噪音,提取出载波条纹;然后应用基于调制方向提取中心线算法确定载波条纹灰度极值点并做二值化处理;再采用基于中心线拟合或者基于条纹间距的边沿中心线补偿法,获得完整的条纹中心线图.实验结果表明:该方法简单、可靠,能快速、准确地提取出连续的中心线.     

Shifted-phase calibration for a 3-D shape measurement system based on orthogonal composite grating projection

This paper proposes a novel method for reducing measurement error caused by spectrum overlapping in orthogonal-composite-grating-based 3-D measurement method. For 3-D measurement systems based on orthogonal composite grating projection, spectrum overlapping causes phase of each deformed phase-shifting fringe changed differently, which violates the principle that the shifted phases between adjacent deformed fringes must be equivalent to 2π/3, and therefore results in phase measurement error. The proposed shifted-phase calibration method is based on that phase variation of each deformed fringe is independent of height and reflectivity of the measured object. Three composite gratings are projected on the reference plane, and each carrier channel includes three phase-shifting gratings needed in phase measuring profilometry (PMP). Because the adjacent phase-shifting fringes demodulated from the same carrier channel have the phase difference of 2π/3, we can respectively calculate the reference plane's phases of three carrier channels by the phase algorithm of PMP method, and the shifted phases between them are obtained. When an object is measured, the shifted phases between deformed phase-shifting fringes can be calibrated. A new 3-D measurement mathematical model is set to reconstruct object. Our experiments prove that the proposed method can effectively restrain the effect of spectrum overlapping and improve measurement accuracy almost one times.     

改进的次条纹积分相位分析技术

条纹花样的单帧相位解调算法在实时、动态测量技术中具有广泛应用。次条纹积分算法具有较高抗噪能力,但其采用载频近似估算形变条纹周期时存在频率失配的固有缺陷,提出一种改进的次条纹积分算法,对条纹的局域频率进行探测,利用局域频率进行次条纹积分,然后再计算相位。模拟实验表明,改进算法的最大误差约为原算法的1/3,并通过条纹投影轮廓术实验进一步证明了改进算法的有效性,为单帧条纹相位分析技术提供了一种可供选择的新算法。     

Orthogonal projection technique for resolution enhancement of the Fourier transform fringe analysis method

The spatial resolution of the phase map in the Fourier transform fringe analysis method is determined by the size of the filter’s window in frequency domain. This article reports a straightforward technique to improve the method’s resolution by a factor of nearly two. The technique requires capturing a second image with a fringe pattern orthogonal to the first one, therefore using the information from both patterns to eliminate the central component in frequency space. The resulting spectrum supports double sized filter windows for removal of the carrier frequency without leaking into adjacent orders. The overall spatial resolution of the method is thus increased. In the following, the Fourier fringe analysis method is briefly reviewed, the new technique is described and analyzed and the experimental results are shown and discussed.