Electrochemical control of the structure of two-dimensional supramolecular organization consisting of phthalocyanine and porphyrin on a gold single-crystal surface

Two-component adlayers consisting of cobalt(II) phthalocyanine (CoPc) and a metalloporphyrin such as 5,10,15,20-tetraphenyl-21H,23H-porphine copper(II) (CuTPP), 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine copper(II) (CuOEP), or 5,10,15,20-tetraphenyl-21H,23H-porphine cobalt(II) (CoTPP) were prepared by immersing either an Au(111) or Au(100) substrate in a benzene solution containing those molecules. The mixed adlayers thus prepared were investigated in 0.1 M HClO4 by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM). The composition of the mixed adlayer consisting of CoPc and CuTPP molecules was found to vary with immersion time. CoPc molecules displaced CuTPP molecules during the modification process with increasing immersion time, and the CuTPP molecules were completely displaced by CoPc molecules in the mixed solution after a prolonged modification time, during which the underlying Au(100) substrate underwent phase transition from the reconstructed (hex) lattice to the unreconstructed (1 x 1) lattice. The two-component adlayer of CoPc and CuTPP was found to form a supramolecular adlayer with the constituent molecules arranged alternately on Au(100)-(hex). The striped structure was stable on Au(100)-(hex) at or near the open circuit potential (OCP), whereas the mixed adlayer was disordered on Au(100)-(1 x 1) at potentials more positive than OCP, where the phase transition of the arrangement of underlying Au atoms (i.e., the lifting of reconstruction) was induced electrochemically. A similar two-component supramolecular adlayer consisting of CoPc and CuTPP was formed on Au(111). A highly ordered, compositionally disordered adlayer of CoTPP and CuTPP was formed on Au(100)-(hex), suggesting that the adlayer structure is independent of the coordinated central metal ion for the formation of supramolecular nanostructures composed of those molecules. A supramolecular organization of CoPc and CuOEP was also found on Au(111). The surface mobility and the molecular reorganization of CoPc and CuOEP on Au(111) were tuned by modulation of the electrode potential. It is concluded that molecular assemblies of the two-component structure consisting of phthalocyanine and porphyrin were controlled not only by the crystallographic orientation of Au but also by the modulation of electrochemical potential.     

In situ scanning tunneling microscopy of molecular assemblies of cobalt(II)- and copper(II)-coordinated tetraphenyl porphine and phthalocyanine on Au(100)

Molecules of copper(II) and cobalt(II) 5,10,15,20-tetraphenyl-21H,23H-porphine (CuTPP and CoTPP) and cobalt(II) phthalocyanine (CoPc) are spontaneously adsorbed onto reconstructed Au(100) substrate from a benzene solution containing each individual complex. In situ scanning tunneling microscopy (STM) was used to examine the real-space arrangement and the internal molecular structure of each of the individual molecules in 0.1 M HClO4 under potential control. The adsorption of CuTPP and CoTPP produced the same highly ordered square array with an intermolecular spacing of 1.44 nm on a reconstructed Au(100) surface. These molecular superlattices and the underlying reconstructed Au(100) predominated between 0 and 0.9 V, but lifting of the reconstructed Au(100) surface and elimination of the ordered adlayers occurred at more positive potentials. Molecular resolution STM revealed propeller-shaped admolecule with its center imaged as a protrusion for Co(II) and a depression for Cu(II). In contrast, the spontaneous adsorption of CoPc molecules resulted in a rapid phase transition from the reconstructed Au(100) surface to the (1 x 1) phase, coupled with the production of locally ordered, square-shaped arrays with an intermolecular distance of 1.65 nm. This molecular adlayer and the Au(100)-(1 x 1) remained unchanged when the potential was modulated between 0 and 1.0 V. These results indicate that the subtle variation in the molecular structure of adsorbate influenced not only its spatial arrangement but also the structure of the underlying Au(100) substrate.     

Two-dimensional supramolecular organization of copper octaethylporphyrin and cobalt phthalocyanine on Au(111): molecular assembly control at an electrochemical interface

Mixed adlayers of 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine copper(II) (CuOEP) and cobalt(II) phthalocyanine (CoPc) were prepared by immersing Au(111) substrate in a benzene solution containing CuOEP and CoPc molecules, and they were investigated in 0.1 M HClO(4) by cyclic voltammetry (CV) and in-situ scanning tunneling microscopy (STM). The composition of the mixed adlayer consisting of CuOEP and CoPc molecules was found to vary depending on the immersion time. CoPc molecules displaced CuOEP molecules during the modification process with increasing immersion time, and the CuOEP molecules were completely replaced with CoPc molecules in the mixed solution after a long modification time. The two-component adlayer consisting of CuOEP and CoPc, which has a structure with the constituent molecules arranged alternately, was found to form either a p(9 x 3(square root)7R - 40.9 degrees) or a p(9 x 3(square root)7R - 19.1 degrees) structure, each involving two molecules on the Au(111) surface. The surface mobility and the molecular reorganization of CuOEP and CoPc were accelerated by modulation of the electrode potential. Different surface structures were produced at different electrode potentials, and hence potential modulation should allow a precisely controllable phase separation to take place in aqueous HClO(4).     

Supramolecular pattern of fullerene on 2D bimolecular "chessboard" consisting of bottom-up assembly of porphyrin and phthalocyanine molecules

Two-component adlayers consisting of zinc(II) phthalocyanine (ZnPc) and a metalloporphyrin, such as zinc(II) octaethylporphyrin (ZnOEP) or zinc(II) tetraphenylporphyrin (ZnTPP), were prepared by immersing either an Au(111) or Au(100) substrate in a benzene solution containing those molecules. The bimolecular adlayers thus prepared were investigated in 0.1 M HClO4 by cyclic voltammetry (CV) and electrochemical scanning tunneling microscopy (EC-STM). A supramolecularly organized "chessboard" structure was formed for the ZnPc and ZnOEP bimolecular array on Au(111), while characteristic nanohexagons were found in the ZnTPP and ZnOEP bimolecular adlayer. EC-STM revealed that the surface mobility and the molecular re-organization of ZnPc and ZnOEP on Au(111) were tunable by manipulating the electrode potential, whereas the ZnTPP and ZnOEP bimolecular array was independent of the electrode potential. A "bottom-up" hybrid assembly of fullerene molecules was formed successfully on an alternate array of bimolecular ZnPc and ZnOEP molecules. The bimolecular "chessboard" served as a template to form the supramolecular assembly of C60 by selective trapping in the open spaces. A supramolecular organization of ZnPc and ZnOEP was also found on the reconstructed Au(100)-(hex) surface. A highly ordered, compositionally disordered but alternate array of ZnPc and ZnOEP was formed on the reconstructed Au(100)-(hex) surface, indicating that the bimolecular adlayer structure is dependent on the atomic arrangement of underlying Au in the formation of supramolecular nanostructures composed of those molecules. On the bimolecular array consisting of ZnPc and ZnOEP on the Au(100)-(hex), no highly ordered supramolecular assembly of C60 was found, suggesting that the supramolecular assembly of C60 molecules is strongly dependent upon the bimolecular packing arrangement of ZnPc and ZnOEP.     

Effect of adlayer structure on the host-guest recognition between calcium and crown-ether-substituted phthalocyanine arrays on Au single-crystal surfaces.

Adlayers of 15-crown-5-ether-substituted cobalt(II) phthalocyanine (CoCRPc) were prepared by immersion of either Au(111) or Au(100) substrate into benzene-ethanol (9:1 v/v) mixed solutions containing CoCRPc. In situ STM imaging was carried out after transferring the CoCRPc-modified Au crystals into aqueous HClO(4) solution. The packing arrangement of the CoCRPc array on Au(111) was determined to be p(8 x 4 radical 3R - 30 degrees ), and the internal structure was clearly observed by high-resolution STM. Two adlayer structures of CoCRPc, (8 x 9) and (4 radical 5 x 4 radical 5)R26.7 degrees, were found on the Au(100)-(1 x 1) terrace. In the presence of 1 mM Ca(2+), two Ca(2+) ions were trapped in two diagonally located 15-crown-5-ether moieties of each CoCRPc molecule on Au(111), whereas encapsulation of Ca(2+) ions was not seen in the CoCRPc arrays on the Au(100)-(1 x 1) surface. The present study demonstrates that the relationship between crown moieties of CRPc and the underlying Au lattice is important in the trapping of Ca(2+) ions in crown rings.     

Structural comparison of self-organized adlayers of ligands and their metal-coordinated complexes on a Au(111) surface: an STM study

Scanning tunneling microscopy (STM) was employed to investigate the adsorption of the linear-spacer-bridged ligands bis(pyrrol-2-yl-methyleneamine) (BPMB and BPMmB), and their Zn(II)-coordinated complexes, BPMB/Zn(II) and BPMmB/Zn(II), onto a Au(111) surface in 0.1 M HClO(4) solution. Both the ligands, with different spacer bridges, and their Zn(II) complexes adsorb onto the Au(111) surface and self-organize into highly ordered two-dimensional arrays. The complexes BPMB/Zn(II) and BPMmB/Zn(II) appear in helical and triangular conformations, respectively, consistent with their chemical structures. Although the metal complexes include ligands, the assembled structures and adlayer symmetries of the ligands and complexes are totally different. The structures and intramolecular features obtained by high-resolution STM imaging are discussed. The results should be important in fabricating surface supramolecular structures.     

In-situ scanning tunneling microscopy of carbon monoxide adsorbed on Au(111) electrode

In-situ scanning tunneling microscopy (STM) coupled with cyclic voltammetry was used to examine the adsorption of carbon monoxide (CO) molecules on an ordered Au(111) electrode in 0.1 M HClO4. Molecular resolution STM revealed the formation of several commensurate CO adlattices, but the (9 x radical 3) structure eventually prevailed with time. The CO adlayer was completely electrooxidized to CO2 at 0.9 V versus RHE in CO-free 0.1 M HClO(4), as indicated by a broad and irreversible anodic peak which appeared at this potential in a positive potential sweep from 0.05 to 1.6 V. A maximal coverage of 0.3 was estimated for CO admolecules from the amount of charge involved in this feature. Real-time in-situ STM imaging allowed direct visualization of the adsorption process of CO on Au(111) at 0.1 V, showing the lifting of (radical 3 x 22) reconstruction of Au(111) and the formation of ordered CO adlattices. The (9 x radical 3) structure observed in CO-saturated perchloric acid has a coverage of 0.28, which is approximately equal to that determined from coulometry. Switching the potential from 0.1 to -0.1 V restored the reconstructed Au(111) with no change in the (9 x radical 3)-CO adlattice. However, the reconstructed Au(111) featured a pairwise corrugation pattern with two nearest pairs separated by 74 +/- 1 A, corresponding to a 14% increase from the ideal value of 65.6 A known for the ( radical 3 x 22) reconstruction. Molecular resolution STM further revealed that protrusions resulting from CO admolecules in the (9 x radical 3) structure exhibited distinctly different corrugation heights, suggesting that the CO molecules resided at different sites on Au(111). This ordered structure predominated in the potential range between 0.1 and 0.7 V; however, it was converted into new structures of (7 x radical 7) and ( radical 43 x 2 radical 13) on the unreconstructed Au(111) when the potential was held at 0.8 V for ca. 60 min. The coverage of CO adlayer decreased accordingly from 0.28 to 0.13 before it was completely removed from the Au(111) surface at more positive potentials.     

Ordered molecular assemblies of substituted bis(phthalocyaninato) rare earth complexes on Au(111): in situ scanning tunneling microscopy and electrochemical studies

Substituted bis(phthalocyaninato) rare earth complexes ML2 (M = Y and Ce; L = [Pc(OC8H17)8]2, where Pc = phthalocyaninato) were adsorbed onto single crystalline Au(111) electrodes from benzene saturated with either YL2 or CeL2 complex at room temperature. In situ scanning tunneling microscopy (STM) and cyclic voltammetry (CV) were used to examine the structures and the redox reactions of these admolecules on Au(111) electrodes in 0.1 mol dm(-3) HClO4. The CVs obtained with YL2- and CeL2-coated Au(111) electrodes respectively contained two and three pairs of redox peaks between 0 and 1.0 V (versus reversible hydrogen electrode). STM molecular resolution revealed that YL2 and CeL2 admolecules were imaged as spherical protrusions separated by 2.3 nm, which suggests that they were oriented with their molecular planes parallel to the unreconstructed Au(111)-(1 x 1). Both molecules when adsorbing from approximately micromolar benzene dosing solutions produced mainly ordered arrays characterized as (8 x 5 radical3)rect (theta = 0.0125). The redox reactions occurring between 0.2 and 1.0 V caused no change in the adlayer, but they were desorbed or oxidized at the negative and positive potential limits. The processes of adsorption and desorption at the negative potentials were reversible to the modulation of potential. Electrochemical impedance spectroscopy (EIS) and CV measurements showed that YL2 and CeL2 adlayers could block the adsorption of perchlorate anions and mediating electron transfer at the Au(111) electrode, leading to the enhancement of charge transfer for the ferro/ferricyanide redox couple.     

Structure and electrochemistry of 4,4'-dithiodipyridine self-assembled monolayers in comparison with 4-mercaptopyridine self-assembled monolayers on Au(111)

4,4'-Dithiodipyridine (PySSPy) monolayers on Au(111) were investigated by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS) and in situ scanning tunneling microscopy (STM). The studies were performed in solutions of different anions and pHs (0.1 M H2SO4, 0.1 M HClO4, 0.1 and 0.01 M Na2SO4, 0.1 and 0.01 M NaOH). The cyclic current-potential curves in H2SO4 show current peaks at about 0.4 V, which are absent for all other electrolytes at this potential. The XPS data suggest that PySSPy adsorbs via the S endgroup on the gold surface and the S-S bond breaks during adsorption. From the chemical shift of the N(ls) peak, it is concluded that in acidic media the self-assembled monolayer (SAM) is fully protonated, whereas in basic solution it is not. The pKa is estimated to be 5.3. STM studies reveal the existence of highly ordered superstructures for the SAM. In Na2SO4 and H2SO4, a (7 x mean square root of 3) structure is proposed. However, whereas in Na2SO4 solutions the superstructure does not change with potential, in 0.1 M H2SO4 the superstructure is observed only negative of the current peak at +0.4 V. At more positive potentials, the film becomes disordered. The results are compared to those for 4-mercaptopyridine (PyS) SAMs. XPS experiments and current-potential curves indicate that both molecules adsorb in the same manner on Au(111), that is, even in the case of PySSPy the adspecies is PyS. The STM results, however, call for a more subtle interpretation. While in Na2SO4 solutions the observed superstructures are the same for both SAMs, markedly different structures are found for PySSPy and PyS SAMs in 0.1 M H2SO4.     

Adsorption and electrochemical activity: an in situ electrochemical scanning tunneling microscopy study of electrode reactions and potential-induced adsorption of porphyrins

The effect of adsorption on molecular properties and reactivity is a central topic in interfacial physical chemistry. At electrochemical interfaces, adsorbed molecules may lose their electrochemical activity. The absence of in situ probes has hindered our understanding of this phenomenon and electrode reactions in general. In this work, classical electrochemistry and electrochemical scanning tunneling microscopy (EC-STM) were combined to provide molecular level insight into electrochemical reactions and the molecular adsorption state at the electrolyte-electrode interface. The metal-free porphyrin 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) adsorbed on Au(111) in 0.1 M H(2)SO(4) solution was chosen as a model system. TPyP is found to irreversibly adsorb on Au(111) over a wide range of potentials, from -0.25 to 0.6 V(SCE). The adsorption state of TPyP has a dramatic effect on its electrochemistry. Preadsorbed, oxidized TPyP displays no well-defined cathodic peaks in cyclic voltammograms in sharp contrast to solution-phase TPyP. Our present work provides direct, molecular level evidence of the electrochemically "invisible" species. Electrochemical activity of absorbed species is recovered by allowing the oxidized molecule sufficient time (tens of minutes) to reduce. The redox state of adsorbed TPyP also affects the nature of the adsorption. Oxidized species can apparently only form monolayers. However, multilayers, stable enough to be imaged by STM, can form when the adsorbed TPyP is in the reduced state. This suggests that by controlling the electrochemistry one can either promote or suppress the formation of multilayers.     

Ordered arrays of semi-crown ligands on an Au(111) electrode surface: <Emphasis Type="Italic">in situ</Emphasis> STM study

In situ scanning tunneling microscopy (STM) and cyclic voltammetry were employed to investigate the adsorption structures of three semi-crown ligands on an Au(111) surface under the potential control. It is found that all the molecules formed ordered arrays in 0.1 mol/L HClO₄ solution, although their geometric structures are complex and asymmetric. The driving force was supposed to come from the balance between intermolecular and molecule-substrate interactions. High resolution STM images revealed internal molecular structures, orientations and packing arrangements in the ordered adlayers. The results are useful for preparing ordered arrays of transition metal-mediated nanostructures.     

Electrochemical redox control of ferrocene using a supramolecular assembly of ferrocene-linked C(60) derivative and metallooctaethylporphyrin array on a Au(111) electrode

Supramolecular assembled layers of ferrocene-linked C(60) derivative (C(60)Fc) and various metal ions coordinated to octaethylporphyrin (MOEP) were formed on the surface of a Au(111) single-crystal electrode by immersing the Au substrate successively into a benzene solution containing MOEP and one containing C(60)Fc molecules. The MOEPs used were zinc(II) (ZnOEP), cobalt(II) (CoOEP), copper(II) (CuOEP), and iron(III) chloride (FeClOEP) of OEP (2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine). The molecules of C(60)Fc directly attached to the Au(111) electrode showed poorly defined electrochemical redox response, whereas a clear electrochemical redox reaction of the ferrocene group in the C(60)Fc molecule was observed at 0.78 V versus reversible hydrogen electrode on ZnOEP, CoOEP, and CuOEP adlayers, but not on the FeClOEP adlayer. Adlattices of the underlying layer and the top layer of C(60)Fc were determined by in situ scanning tunneling microscopy. Adlayer structures of MOEP were independent of the central metal ion; that is, MOEP molecules were arranged hexagonally with two different orientations. Highly ordered C(60)Fc arrays were formed with 1:1 composition on the ZnOEP-, CoOEP-, and CuOEP-modified Au(111) surface, whereas a disordered structure of C(60)Fc was found on the FeClOEP-modified Au(111) surface. The presence of Cl ligand was found to prevent the formation of supramolecularly assembled layers with C(60)Fc molecules, resulting in an ill-defined unclear electrochemical response of the Fc group. The well-defined electrochemical response of the Fc group in C(60)Fc was clearly due to the control of orientation of C(60)Fc molecules.     

Ordered arrays of semi-crown ligands on an Au(111) electrode surface: in situ STM study

Self-organized systems have attracted much at-tention due to their potential applications in nano- technology as a bottom-up?approach for the con-struction of molecule-scale devices and nanostruc-tures[1—4]. Beyond the self-assembly of small molecu-lar building blocks, Schnherr et al. recently suc-ceeded in arranging the rosette supramolecular nanos-tructures in two dimensions on HOPG[5,6]. Moreover, interest has tremendously increased in the su-pramolecular structures via coordination-dr…     

Self-assembled monolayers of cobalt(II)- (4-tert-butylphenyl)-porphyrins: the influence of the electronic dipole on scanning tunneling microscopy images

Self-assembled monolayers (SAMs) of cobalt(II) 5,10,15,20-tetrakis(4-tert-butylphenyl)-porphyrin, a promising material for optical, photoelectrochemical, and chemical sensor applications, were prepared on Au(111) via axial ligation to 4-aminothiophenol, and studied by several surface science techniques. Scanning tunneling microscopy (STM) and spectroscopy (STS) measurements showed the apparent topology of the Au(111) herringbone structure reconstruction, but with bias-dependent contrast images and asymmetric I/V characteristics. Photoelectron spectroscopy confirmed the presence of metalloporphyrins on the surface, whereas near-edge X-ray absorption (NEXAFS) measurements revealed that the porphyrin ring was tilted by about 70 degrees with respect to the surface plane. The above effects are ascribed to the presence of oriented molecular dipole layers between the metal and the organic material as confirmed by a comparison with first-principles density-functional theory calculations. The measured bias-dependent STM profiles have been reproduced by a simple monodimensional tunneling model.     

In situ STM evidence for the adsorption geometry of three N-heteroaromatic thiols on Au(111)

The electrochemical behavior of three heteroaromatic thiols (MBs) (2-mercaptobenzimidazole (MBI), 2-mercaptobenzothiazole (MBT), and 2-mercaptobenzoxazole (MBO)) on a Au(111) surface has been investigated by electrochemical scanning tunneling microscopy (ECSTM) and cyclic voltammetry (CV) in 0.1 M HClO(4) solution. All three thiols form oriented molecular cluster lines along the reconstruction line direction at 0.55 V. With the electrode potential shifting negatively, the molecules undergo a disordered-ordered structural transition. Molecularly resolved STM images show that all three molecules form striped adlayers in the desorption region on the Au(111) surface. The different heteroatoms in the heteroaromatic rings result in different electrochemical behavior of the MB self-assembled monolayers (SAMs). MBI, MBT, and MBO are proposed to interact with the substrate via the S-Au bonds from thiol group and the coordination interaction of N, S, and O with the substrate from the heteroaromatic ring, respectively. These results provide direct evidence of the electrochemical behavior and the adlayer structures of MB SAMs on the Au electrode.     

Solvent effects on the adsorption and self-organization of Mn12 on Au(111)

A sulfur-containing single molecule magnet, [Mn12O12(O2CC6H4SCH3)16(H2O)4], was assembled from solution on a Au(111) surface affording both submonolayer and monolayer coverages. The adsorbate morphology and the degree of coverage were inspected by scanning tunneling microscopy (STM), while X-ray photoelectron spectroscopy (XPS) allowed the determination of the chemical nature of the adsorbate on a qualitative and quantitative basis. The properties of the adsorbates were found to be strongly dependent on the solvent used to dissolve the magnetic complex. In particular, systems prepared from tetrahydrofuran solutions gave arrays of isolated and partially ordered clusters on the gold substrate, while samples prepared from dichloromethane exhibited a homogeneous monolayer coverage of the whole Au(111) surface. These findings are relevant to the optimization of magnetic addressing of single molecule magnets on surfaces.     

Electrostatically controlled nanostructure of cationic porphyrin diacid on sulfate/bisulfate adlayer at electrochemical interface

Two different cationic tetraphenyl porphyrins, one with two carboxyphenyl groups in cis-position and the other in trans-position (cis- and trans-H(4)DCPP(2+)), have been examined to control the structure of their 2D supramolecular assemblies in 0.05 M H(2)SO(4) at electrochemical interfaces. Electrochemical scanning tunneling microscopy (EC-STM) images revealed the formation of supramolecularly organized nanostructures of cis-H(4)DCPP(2+) such as dimer, trimer, and tetramer on the (square root(3) x square root(7)) sulfate/bisulfate adlayer, suggesting the importance of both electrostatic interaction between cationic porphyrin core and sulfate/bisulfate adlayer and the hydrogen bond formation between carboxyl groups of the nearest neighbor cationic porphyrins. Trans-H(4)DCPP(4+) ions were also found to be aligned in the square root(3) direction of the sulfate/bisulfate adlayer. The structure of these cationic porphyrin adlayers was found to depend upon the electrode potential; i.e., when the potential was changed in the negative direction, the (square root(3) x square root(7)) sulfate/bisulfate adlayer disappeared, and no ordered arrays were formed. In contrast, when 0.1 M HClO(4) was used as an electrolyte solution, only a disordered array was observed. The results of the present study indicate that the (square root(3) x square root(7)) sulfate/bisulfate adlayer formed on Au(111) in 0.05 M H(2)SO(4) plays a significant role as a nanorail template in the control of electrostatically assembled diacid porphyrin dicarboxylic acid derivative. In addition, the high-resolution STM clearly distinguished between cis-H(4)DCPP(2+) ion and cis-H(2)DCPP molecule. The cis-H(2)DCPP molecules on Au(111) provided an adlayer structure and an electrochemical behavior which are different from those of cis-H(4)DCPP(2+) ions.     

Porphyrin self-assembly at electrochemical interfaces: role of potential modulated surface mobility

The self-assembly of 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on Au(111) electrodes was investigated. The adlayer structure was found to depend on the electrode potential. At positive potentials (>0.5V(SCE)), a disordered layer of TPyP is formed on the Au(111) electrode. STM images showed that the disordered molecules are immobile. At negative potentials (-0.2V(SCE)), however, the molecules are highly mobile and can no longer be imaged by STM, though they remain on the surface. At intermediate potentials (-0.2 to +0.2V(SCE)), the TPyP formed a highly ordered adlayer. Once the ordered adlayer is formed, it persists even after the potential is stepped to higher values (0.5-0.8 V(SCE)). These results can be explained by the role of potential modulated adsorbate-substrate interaction and surface mobility. This suggests the intriguing prospect of using electrode potential to tune surface interactions and to drive surface processes, e.g., molecular self-assembly, in electrochemical systems.     

Structural Transformation of Surface-Confined Porphyrin Networks by Addition of Co Atoms

The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423 K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule.     

Schiff碱N-aete-N在Au(111)上自组装单分子膜的电化学及STM研究

利用电化学技术及扫描隧道显微镜(STM),于0.1mol/LHClO₄溶液中研究了Schiff碱N-aete-N在单晶Au(111)面上所形成的自组装单分子膜(SAMs)的电化学性质及结构.N-aete-N在Au(111)电极表面的吸附抑制了金的阳极氧化,同时使固/液界面双层电容明显降低.观察到N-aete-NSAMs的高分辨STM图像.N-aete-N分子在Au(111)表面上以(6×7)结构单胞呈二维有序排列,其表面浓度为5.5×10^-11mol/cm².