Ab initio study of the structural,electronic and elastic properties of AgSbTe2, AgSbSe2, Pr3AlC,Ce3AlC,Ce3AlN,La3AlC and La3AlN compounds

In this paper, we study the structural, electronic and elastic properties of the ternary AgSbTe₂, AgSbSe₂, Pr₃AlC, Ce₃AlC, Ce₃AlN, La₃AlC and La₃AlN compounds using the full-potential linearized augmented plane wave (FP-LAPW) scheme and the pseudopotential plane wave (PP-PW) scheme in the frame of generalized gradient approximation (GGA). Results are given for the lattice parameters, bulk modulus, and its pressure derivative. The calculated lattice parameters are in good agreement with experimental results. We have determined the full set of first-order elastic constants, shear modulus, Young's modulus and Poisson's ratio of these compounds. Also, we have presented the results of the band structure, densities of states, it is found that this compounds metallic behavior, and a negative gap Г→R for Pr₃AlC. The analysis charge densities show that bonding is of covalent–ionic and ionic nature for AgSbSe₂ and AgSbTe₂ compounds.     

Ab initio comparative study of C54 and C49 TiSi2 surfaces

A theoretical comparison of C54 and C49 TiSi₂ surfaces is presented, using ab initio plane-wave ultrasoft pseudopotential method based on generalized gradient approximation (GGA). The different surface energies of TiSi₂ have not only been calculated out, but the preferential formation of C49 phase in solid-state reaction could be explained by smaller surface energies and Poisson's ratio of C49 TiSi₂ as well. As for polar C54 TiSi₂(1 0 0) and C49 TiSi₂(0 1 0) surfaces, the Si termination surfaces are more stable.     

Ab initio predicted elastic and thermodynamic properties of Imm2-BN under high pressure

The structural parameters, elastic constants, thermodynamic properties of Imm2-BN under high pressure were calculated via the density functional theory in combination with quasi-harmonic Debye approach. The results showed that the pressure has the significant effect on the equilibrium lattice parameters, elastic and thermodynamic properties of Imm2-BN. The obtained ground state structural parameters are in good agreement with previous theoretical results. The elastic constants, elastic modulus, and elastic anisotropy were determined in the pressure range of 0–90?GPa. Furthermore, by analyzing the B/G ratio, the brittle/ductile behavior under high pressure is evaluated and the elastic anisotropy of the Imm2-BN up to 90?GPa is studied in detail. Moreover, the pressure and temperature dependence of thermal expansion coefficient, heat capacity, Debye temperature, and Grüneisen parameter are predicted in a wide pressure (0–90?GPa) and temperature (0–1600?K) ranges. The obtained results are expected to provide helpful guidance for the future synthesis and application of Imm2-BN.     

Elastic, electronic, and optical properties of hypothetical SnNNi3 and CuNNi3 in comparison with superconducting ZnNNi3

The elastic, electronic, and optical properties of MNNi₃ (M=Zn, Sn, and Cu) have been calculated using the plane-wave ultrasoft pseudopotential technique, which is based on the first-principle density functional theory (DFT) with generalized gradient approximation (GGA). The optimized lattice parameters, independent elastic constants (C₁₁, C₁₂, and C₄₄), bulk modulus B, compressibility K, shear modulus G, and Poisson's ratio υ, as well as the band structures, total and atom projected densities of states and finally the optical properties of MNNi₃ have been evaluated and discussed. The electronic band structures of the two hypothetical compounds show metallic behavior just like the superconducting ZnNNi₃. Using band structures, the origin of features that appear in different optical properties of all the three compounds has been discussed. The large reflectivity of the predicted compounds in the low energy region might be useful in good candidate materials for coating to avoid solar heating.     

The study on porosity and thermophysical properties of nanostructured La2Zr2O7 coatings

Lanthanum-zirconium nano-powders were synthesized by molten salts method. Nanostructured lanthanum-zirconium coatings were deposited by air plasma spraying. Scanning electron microscopy and X-ray diffraction were carried out to analyze the as-sprayed coatings and powders. The pore size distribution and buck density of coatings were identified by mercury intrusion porosimetry. The thermophysical properties of the nanostructured coatings were also examined through laser flash technique and differential scanning calorimetry. The results demonstrate that the as-sprayed nanostructured coatings consist of the pyrochlore-type phase. The as-sprayed nanostructured lanthanum-zirconium coatings have a very low porosity. The thermal conductivity of the as-sprayed nanostructured lanthanum-zirconium coating is lower than that of the conventional coating between 200 °C and 950 °C, but when the temperature between 950 °C and 1300 °C, the result is reverse.     

Ab initio study of structural and electronic properties of BiAlO3 and BiGaO3

The first principles within the full potential linearized augmented plane wave (FP-LAPW) method was applied to study the structural and electronic properties of cubic perovskite-type compounds BiAlO₃ and BiGaO₃. The lattice constant, bulk modulus, its pressure derivative, band structure and density of states were obtained. The results show that BiGaO₃ should exhibit higher hardness and stiffness than BiAlO₃. The Al–O or Ga–O bonds are typically covalent with a strong hybridizations as well as Bi–O ones that have a significant ionic character. Both materials are weakly ionic and exhibit wide and indirect band gaps, which are typical of insulators.     

Ab initio band structure calculations of the low-temperature phases of Ag2Se, Ag2Te and Ag3AuSe2

Ab initio band structure calculations were performed for the low-temperature modifications of the silver chalcogenides β-Ag₂Se, β-Ag₂Te and the ternary compound β-Ag₃AuSe₂ by the local spherical wave (LSW) method. Coordinates of the atoms of β-Ag₂Se and β-Ag₃AuSe₂ were obtained from refinements using X-ray powder data. The structures are characterized by three, four and five coordinations of silver by the chalcogen, a linear coordination of gold by Se, and by metal-metal distances only slightly larger than in the metals. The band structure calculations show that β-Ag₃AuSe₂ is a semiconductor, while β-Ag₂Se and β-Ag₂Te are semimetals with an overlap of about 0.1-0.2 eV. The Ag 4d and Au 5d states are strongly hybridized with the chalcogen p states all over the valence bands. β-Ag₂Se and β-Ag₂Te have a very low DOS in the energy range from about −0.1 to +0.5 eV. The calculated effective mass β-Ag₂Se is about 0.1-0.3 m_e for electrons and 0.75 m_e for holes, respectively.     

Electronic band structure of pseudo-binary AlB2-like hexagonal silicides SrNixSi2−x as novel low-TC superconductors

The very recently discovered pseudo-binary hexagonal silicide SrNi_xSi_2−x, which exhibits low-T_C superconductivity, was examined theoretically to understand the effect of the unusual doping type (partial replacement of Si by Ni) on the electronic band structure of this material. Besides, the possible factors of the stabilization of the hexagonal AlB₂-type structure of SrSi₂ upon substitution of Ni for Si, and the solubility limit of Ni in SrNi_xSi_2−x are discussed in terms of competing Si–Si, Si–Ni, and Ni–Ni bonds.     

Ab initio calculation of electronic transition moments for singlet excited states of the H2 molecule

Ab initio CI electronic dipole transition moments have been calculated for the transitions between singlet states of the hydrogen molecule correlating asymptotically with H(nl)+H(1s) (n=1,2,3). The investigated singlet-singlet transitions include the 30 (n=3) inter-Rydberg transitions and the 32 transitions which may contribute to absorption in the far wings of the Balmer α line of atomic hydrogen perturbed by another hydrogen atom in its ground state. Results are presented for internuclear distances 1.0a₀?R?12a₀. The present results compare well with the previous theoretical calculations available for about half of the transitions treated in the present work. Thirty eight new transitions are presented. Adiabatic potential energies for the and and improved energies for the and states are reported as well.     

An ab initio calculation of O and Si NMR parameters for SiO2 polymorphs

Ab initio molecular orbital calculations (Hartree–Fock, HF and density functional theories, DFTs) have been carried out for SiO₂ polymorphs coesite, low cristobalite, and α-quartz, in order to investigate the reliability of this method for predicting ²⁹Si and ¹⁷O nuclear magnetic resonance (NMR) properties of silicates. Oxygen- and silicon-centered clusters consisting of one (1T) to three tetrahedral (3T) shells (one to four atomic shells), taken from real crystal structure, have been investigated. It is found that for reasonable predication of both the ²⁹Si and ¹⁷O chemical shifts (δ_i^Si and δ_i^O), the minimum cluster is one that gives the correct second neighbors to the nucleus of interest. Both the δ_i^Si and δ_i^O have reached convergence with respect to cluster size at the OH-terminated two tetrahedral (2T) shell (three atomic shells around Si and four atomic shells around O) model. At convergence, the calculated δ_i^Si values agree well (within ±1 ppm) with experimental data. The calculated ¹⁷O electric field gradient (EFG)-related parameters also agree with experimental data within experimental uncertainties. The calculation also reproduces small differences in δ_i^O for O sites with similar tetrahedral connectivities, but shows deviations up to about 10 ppm in relative difference for O sites with different tetrahedral connectivities. The poor performance for the latter is mainly due to the approximations of the HF method. Our study thus suggests that the ab initio calculation method is a reliable mean for predicting ²⁹Si and ¹⁷O NMR parameters for silicates. Such an approach should find application not only to well-ordered crystalline phases, but also to disordered materials, by combining with other techniques, such as the molecular dynamics simulation method.     

Elasticity, electronic structure, chemical bonding and optical properties of monoclinic ZrO2 from first-principles

Structural parameters as well as elastic, electronic, bonding and optical properties of monoclinic ZrO₂ were investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT). The calculated structural properties and independent elastic constants of monoclinic ZrO₂ are in favorable agreement with previous work. We have derived the bulk and shear moduli, Young’s modulus and Poisson coefficients for monoclinic ZrO₂ and estimated the Debye temperature of monoclinic ZrO₂ from acoustic velocity. Electronic and bonding properties are studied from the calculation of band structure, densities of states and charge densities. Furthermore, in order to clarify the mechanism of optical transitions in monoclinic ZrO₂, the dielectric functions are calculated and analyzed by means of the electronic structure, which shows significant optical anisotropy in the components of polarization directions (1 0 0), (0 1 0) and (0 0 1).     

Electronic and pressure dependent vibrational properties of silicide Sr(Ni0.5Si0.5)2

We report a detailed ab initio study of the structural, electronic, and volume dependent elastic and lattice dynamical properties of Sr(Ni_0.5Si_0.5)₂. The calculations have been carried out within the local density functional approximation using norm-conserving pseudopotentials and a plane-wave basis. The phonon dispersion curves along the high-symmetry directions and phonon frequencies with their Grüneisen parameters at the Brillouin zone center are computed by using density functional perturbation theory while the elastic constants are calculated in metric-tensor formulation. The band structure, and partial densities of states and Fermi surface topology are also discussed.     

Structural, electronic, magnetic and elastic properties of tetragonal layered diselenide KCo2Se2 from first principles calculations

The structural, elastic, magnetic and electronic properties of the layered tetragonal phase KCo₂Se₂ have been examined in details by means of the first-principles calculations and analyzed in comparison with the isostructural KFe₂Se₂ as the parent phase for the newest group of ternary superconducting iron-chalcogenide materials. Our data show that KCo₂Se₂ should be characterized as a quasi-two-dimensional ferromagnetic metal with highly anisotropic inter-atomic bonding owing to mixed ionic, covalent, and metallic contributions inside [Co₂Se₂] blocks, and with ionic bonding between the adjacent [Co₂Se₂] blocks and K sheets. This material should behave in a brittle manner, adopt enhanced elastic anisotropy rather in compressibility than in shear, and should show very low hardness.     

Ab initio calculations study of the electronic, optical and thermodynamic properties of NaMgH3, for hydrogen storage

The structural stability, electronic structure, optical and thermodynamic properties of NaMgH₃ have been investigated using the density functional theory. Good agreement is obtained for the bulk crystal structure using both the local density approximation (LDA) and the generalized gradient approximation (GGA) for the exchange-correlation energy. It is found from the electronic density of states (DOS) that the valence band is dominated by the hydrogen atoms while the conduction band is dominated by Na and Mg empty states. Also, the DOS reveals that NaMgH₃ is a large gap insulator with direct band gap 3.4 eV. We have investigated the optical response of NaMgH₃ in partial band to band contributions and the theoretical optical spectrum is presented and discussed in this study. Optical response calculation suggests that the imaginary part of dielectric function spectra is assigned to be the interband transition. The formation energy for NaMgH₃ is investigated along different reaction pathways. We compare and discuss our result with the measured and calculated enthalpies of formation found in the literature.     

The electronic structure and properties of Fe6(N1−xCx)2 carbonitrides by first-principles calculations

Electronic structure and properties of Fe₆(N_1−xC_x)₂ carbonitrides with 0≤x≤1, i.e. the concentrations of N and C elements are respectively in range of 0∼7.69 wt% and 0∼6.67 wt%, have been studied by first-principles calculations based on density functional theory (DFT) implemented in the Cambridge Serial Total Energy Package (CASTEP) code. The calculated results show that the Fe₆(N_1−xC_x)₂ carbonitrides are thermodynamically and mechanically stable. Lattice parameters and stability of the carbonitrides increase when C atoms replace N atoms in Fe₆N₂ unit cell. In Fe₆(N_1−xC_x)₂ unit cell, the hybridization effect between C-2p and Fe-3d states is stronger than that between N-2p and Fe-3d states. Elastic properties and melting points of the carbonitrides change slightly with the substitution of C atoms for N atoms in Fe₆(N_1−xC_x)₂ carbonitrides.     

Comparison of optical properties and band structures of SnSe2 and SnS2

The comparative study of optical properties of SnSe₂ and SnS₂ is made by analysis of the reflectivity spectra obtained for the two compounds between 3.8 and 28 eV. The reflectivity structures are related to direct transitions between regions of high density of states. This result shows a great similarity in the electronic structure of the two compounds.     

Ab initio study of the structural,electronic, elastic and magnetic properties of Cu2GdIn,Ag2GdIn and Au2GdIn

We preformed first-principle calculations for the structural, electronic, elastic and magnetic properties of Cu₂GdIn, Ag₂GdIn and Au₂GdIn using the full-potential linearized augmented plane wave (FP-LAPW) scheme within the generalized gradient approximation by Wu and Cohen (GGA-WC), GGA+U, the local spin density approximation (LSDA) and LSDA+U. The lattice parameters, the bulk modulus and its pressure derivative and the elastic constants were determined. Also, we present the band structures and the densities of states. The electronic structures of the ferromagnetic configuration for Heusler compounds (X₂GdIn) have a metallic character. The magnetic moments were mostly contributed by the rare-earth Gd 4f ion.     

Ab initio calculations of electronic structure of anatase TiO2

This paper presents the results of the self-consistent calculations on the electronic structure of anatase phase of TiO2. The calculations were performed using the full potential-linearized augmented plane wave method (FP-LAPW)in the framework of the density functional theory (DFT) with the generalized gradient approximation (GGA). The fullyoptimized structure, obtained by minimizing the total energy and atomic forces, is in good agreement with experiment.We also calculated the band structure and the density of states. In particular, the calculated band structure prefers an indirect transition between valence and conduction bands of anatase TiO2, which may be helpful for clarifying theambiguity in other theoretical works.     

Nanoscale ab-initio calculations of optical and electronic properties of LaCrO3 in cubic and rhombohedral phases

We report nanoscale ab-initio calculations of the linear optical and electronic properties of LaCrO₃ in nonmagnetic cubic and rhombohedral phases using the full potential linear augmented plane wave (FP-LAPW) method. In this work the generalized gradient approximation is used for exchange-correlation potential. The dielectric tensor is derived within random-phase approximation. We present results for the band structure, density of states, imaginary and real parts of dielectric tensor, electron energy loss spectroscopy, sum rules, reflectivity, refractive index and extinction coefficient. The regions of transparent, absorption and reflection are discussed. We are not aware of any published experimental or theoretical data for these phases, so our calculations can be used to cover this lack of data for these phases.