硫钒铜矿化合物电子结构和电致变色特性的第一原理研究

基于密度泛函的第一原理赝势平面波方法,计算晶体结构、电子结构和光学性质,研究硫钒铜矿化合物Cu₃VS₄、Cu₃NbS₄和Cu₃TaS₄的电子输运及电致变色特性,探讨作为透明半导体材料应用于太阳能电池和电致变色器件的可能性.电子结构的计算表明这类化合物是间接带隙半导体,其电子能带的导带底和价带顶分别位于布里渊区的X点和R点.价带顶的电子本征态主要来自于Cu原子的d电子轨道,而导带底电子态主要来源于VB族元素原子的d电子轨道.能带结构、电荷布居分析、电子局域化函数和光吸收及反射谱的计算表明这些硫钒铜矿化合物属于极性共价半导体,具有较高的电荷迁移率和优良的电致变色特性,可应用于高效电致变色器件.     

FP-LMTO calculations of the structural,elastic, thermodynamic,and electronic properties of the ideal-cubic perovskite BiGaO3

Using the first-principles full-potential linear muffin-tin orbital method within the local density approximation, we have studied the structural, elastic, thermodynamic, and electronic properties of the ideal-cubic perovskite BiGaO₃. It is found that this compound has an indirect band gap. The valence band maximum (VBM) is located at Γ-point, whereas the conduction band minimum (CBM) is located at X-point. The pressure and volume dependences of the energy band gaps have been calculated. The elastic constants at equilibrium are also determined. We derived the bulk and shear moduli, Young’s modulus, and Poisson’s ratio. The thermodynamic properties are predicted through the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variation of the bulk modulus, heat capacities, and Debye temperature with pressure and temperature are successfully obtained.     

First-principles study on electronic structure of Sr2Bi2O5 crystal

The electronic structure of Sr₂Bi₂O₅ is calculated by the GGA approach. Both of the valence band maximum and the conduction band minimum are located at Γ-point. This means that Sr₂Bi₂O₅ is a direct band-gap material. The wide energy-band dispersions near the valence band maximum and the conduction band minimum predict that holes and electrons generated by band gap excitation have a high mobility. The conduction band is composed of Bi 6p, Sr 4d and O 2p energy states. On the other hand, the valence band can be divided into two energy regions ranging from −9.5 to −7.9 eV (lower valence band) and from −4.13 to 0 eV (upper valence band). The former mainly consists of Bi 6s states hybridizing with O 2s and O 2p states, and the latter is mainly constructed from O 2p states strongly interacting with Bi 6s and Bi 6p states.     

B-cation effect on the electronic and magnetic properties of CeBO3 (B=Ga, In) compounds from first principles study

The ab initio APW+lo method is used to study the cation effect on the electronic structure of CeBO₃ (B=Ga, In) compounds. High-pressure structural behavior, magnetic phase stabilities and electronic properties of both materials have been investigated. The observed most stable phases are the orthorhombic (Pnma) and hexagonal (P6₃cm) for CeGaO₃ and CeInO₃, respectively. It is shown that the ferromagnetic (FM) state in CeGaO₃ is energetically more favorable than the anti-ferromagnetic (AFM) one, unlike CeInO₃ where the AFM-III configuration is the lowest in energy. LSDA+U calculation shows that the valence band maximum is located at T point and the conduction band minimum is located at the center of the Brillouin zone, resulting in a wide indirect energy band gap of about 3.6 eV in the ferromagnetic ordering CeGaO₃ which is typical of semiconductor with large gap. CeInO₃ compound keeps the metallic character using DFT+U calculation.     

Thermoelectric properties and electronic structure of Te-doped CoSb3 compounds

Co₄Sb_12−xTe_x compounds were prepared by mechanical alloying combined with cold isostatic pressing, and the effects of Te doping on the thermoelectric properties were studied. The electronic structure of Te-doped and undoped CoSb₃ compounds has been calculated using the first-principles plane-wave pseudo-potential based on density functional theory. The experimental and calculated results show that the value of the solution limit x of Te in Co₄Sb_12−xTe_x compounds is between 0.5 and 0.7. The Fermi surface of CoSb₃ is located between the conduction band and the valence band, and its electrical resistivity decreases with increasing temperature. The density of states is mainly composed of Co 3d and Sb 5p electrons for intrinsic CoSb₃.The Fermi surface of Te-doped compounds moves to the conduction band and its electrical resistivity increases with increasing temperature, exhibiting n-type degenerated semiconductor character. Under the conditions of the experiment, the maximum value 2.67 mW/m K² of the power factor for Co₄Sb_11.7Te_0.3 is obtained at 600 K; this is about 14 times higher than that of CoSb₃.     

Theoretical investigations of NiTiSn and CoVSn compounds

The structural, elastic and electronic properties of NiTiSn and CoVSn half-Heusler compounds have been calculated using the full-potential linear muffin-tin orbital (FP-LMTO) method. The computed equilibrium lattice constants are in excellent agreement with the available experimental and theoretical data. The elastic constants C_ij are calculated using the total energy variation with strain technique. The polycrystalline elastic moduli (namely: the shear modulus, Young's modulus, Poisson's ratio, Lamé's coefficients, sound velocities and the Debye temperature) were derived from the obtained single-crystal elastic constants. The ductility mechanism for the studied compounds is discussed via the elastic constants C_ij and their related parameters. The electronic band structure calculations show that the conduction band minimum (CBM) is located at the X point for both compounds, whereas the valence band maximum (VBM) is located at the Г point for NiTiSn and at the L point for CoVSn, resulting in indirect energy band gaps of 0.46 and 0.75 eV for NiTiSn and CoVSn, respectively. The pressure and volume dependences of the energy band gaps have been calculated.     

Electronic band structure of partially inverse spinel MgIn2S4 as calculated by the semiempirical pseudopotential method

The electronic band structure of the partially inverse spinel MgIn₂S₄ has been calculated on the symmetry lines ΓΛL, ΓΔX and ΓΣK by the semiempirical pseudopotential method. The general features of the band structure of MgIn₂S₄ are quite similar to those of the normal spinel CdIn₂S₄. The conduction band minimum is located at Γ and the valence band maximum is along the Σ line. The indirect energy gap (Γ_1cΣ_4v) is 2.50 eV. The effects of magnesium vacancy and variations in the cation distribution and in the parameter u are examined and shown to be small.     

Electronic structure of copper halides CuI and CuCl: A comparative X-Ray photoelectron and absorption spectroscopy study

The energy distributions of the occupied and unoccupied electronic states for copper halides CuCl and CuI have been investigated using X-ray photoemission and absorption spectroscopy with a highenergy resolution on the equipment of the Russian-German beamline for outlet and monochromatization of synchrotron radiation from the electron storage ring BESSY II. A quasi-molecular analysis of the obtained experimental spectra has revealed that there is a fundamental similarity of the energy structures of the valence band and the conduction band of copper halides CuX (X = Cl, I) due to the identical atomic structure of the studied compounds. The differences in the positions of individual energy subbands in the valence band and the conduction band of CuX and in their intensities in the spectra are associated with different degrees of hybridization of the Cu 3d, 4s and X(n + 1)s, np valence states, as well as with different sizes of structural units (CuCl₄ and CuI₄ quasi-molecules) of the studied crystals.     

Many-body effects on the width of the band gap in Bi2Te2X (X = Te, Se, S) topological insulators

The spectrum of quasiparticles of Bi₂Te₂X (X = Te, Se, S) three-dimensional topological insulators has been theoretically studied in the GW approximation with the inclusion of the spin-orbit interaction in the construction of the Green’s function and self-energy. It has been shown that many-body corrections to the Kohn-Sham states in Bi₂Te₂X increase the fundamental band gap similar to conventional semiconductors. However, the band gap at the Γ point decreases in this case. Gaps in the quasiparticle spectrum obtained in agreement with the experimental data correspond to the difference between the minimum of the conduction band, which is located on the Γ-Z line, and the maximum of the valence band, which lies beyond the symmetric directions in the mirror plane.     

Structural investigation of Si0.5Ge0.5 alloy for optoelectronic applications: Ab initio study

The structural, electronic and optical properties of the binary silicon–germanium alloy have been investigated using the projector augmented-wave (PAW) calculations with a powerful VASP package (Vienna ab initio simulation package). The structural properties of Si_0.5Ge_0.5 alloy have been calculated using total energy calculations and compared with our empirical model of bulk modulus. The electronic band structure and density of state of Si_0.5Ge_0.5 alloy show that the conduction band minimum (CBM) is located at the X point and the valence band maximum (VBM) is located at the Г point, resulting in indirect (Г–X) energy band gap of 0.48 eV. The results of the refractive index and optical dielectric constant of Si_0.5Ge_0.5 alloy are also obtained. The PAW's results are in good agreement with experimental, theoretical and our model results.     

Exploring the electronic structure of Pb2+ ions containing material Pb16(OH)16(NO3)16

A theoretical band structure calculation for lead nitrate hydroxide Pb₁₆(OH)₁₆(NO₃)₁₆ single crystal was performed based on the experimental crystallographic data obtained by Chang et al. Calculations exhibit that the conduction band minimum (CBM) is situated at Γ the center of the Brillouin zone (BZ) while the valence band maximum (VBM) is located between Γ and Y points of the BZ, resulting in an indirect energy band gap of about 3.70 eV in close agreement to the measured one (3.78 eV). The angular momentum resolved projected density of states reveals the existence of the strong hybridization between the orbitals and the VBM is originated from Pb-6s/6p and O-2p orbitals while the CBM from N-2p and Pb-6p orbitals. The calculated valence electronic charge density distribution explore the bond characters and the dominancy of the covalent bonding between Pb–O of PbO_n ployhedra and N–O of [NO₃]⁻ triangle. The calculated bond lengths and angles show good agreement with the experimental data.     

First-principles energy band calculation for undoped and N-doped InTaO4 with layered wolframite-type structure

The electronic structures of undoped and N-doped InTaO₄ with optimized structures are calculated within the framework of the density functional theory. Calculated lattice constants are in excellent agreement with experimental values, within a difference of 2%. The valence band maximum (VBM) is located near the middle point on the ZD line and the conduction band minimum (CBM) near the middle point on the DX line. This means that InTaO₄ is an indirect-gap material and a minimum theoretical gap between VBM and CBM is ca. 3.7 eV. The valence band in the range from −6.0 to 0 eV mainly consists of O 2p orbitals, where In 4d5s5p and Ta 5d orbitals are slightly hybridized with O 2p orbitals. On the other hand, the conduction band below 5.5 eV is mainly composed of the Ta 5d orbitals and the contributions of In and O orbitals are small. The band gap of N-doped InTaO₄ decreases by 0.3 eV than that of undoped InTaO₄, because new gap states originating from N 2p orbitals appear near the top of the valence band. This result indicates that doping of N atoms into metal oxides is a useful method to develop photocatalysts sensitive to visible light.     

First principles study on electronic structure of β-Ga2O3

We have studied the electronic structure of β-Ga₂O₃ using the first principles full-potential linearized augmented plane wave method. It is found that β-Ga₂O₃ has an indirect band gap with a conduction band minimum (CBM) at Γ point and a valence band maximum on the E line. The anisotropic optical properties are explained by the selection rule of the band-to-band transitions. On the other hand, the shape of the CBM is almost isotropic and, therefore, the observed electronic anisotropy in the n-type semiconducting state should not be attributed to the properties of a perfect lattice. The Burstein-Moss shift is discussed using the effect of several allowed transitions between the levels of the valence band and the CBM.     

Photoemission of LaI2 and CeI2

The electronic structure of the layered compounds LaI₂ and CeI₂ was investigated by photoemission and electron energy loss spectroscopy. From the experimental results we are able to confirm the metallic nature of these compounds, and by using photon energy dependent measurements of the valence band we can identify the orbital character of the conduction band as essentially 5d¹-like. A detailed analysis of the Ce 3d and 4f spectra yields a remarkably small 4f-5d hybridization strength, almost completely decoupling the f-electron from the conduction band, which makes CeI₂ a somewhat unusual system compared to other metallic Ce compounds. Band structure calculations by Jepsen and Andersen [1] confirm these experimental results.     

First-principles study of electronic structure and magnetism of cubic Al1−xErxN using the LSDA+U approach

First-principles calculations, by means of the full-potential augmented plane wave method using the LSDA+U approach (local spin density approximation with Hubbard-U corrections), have been carried out for the electronic structure of the Al_0.75Er_0.25N. The LSDA+U method is applied to the rare-earth 4? states. We have investigated the electronic and magnetic properties.The Al_0.75Er_0.25N is shown to be a semiconductor, where the filled ? states are located in the valence bands and the empty ones above the conduction band edge. The magnetic interaction of the rare-earth ion with the host states at the valence and conduction band edges has been investigated and discussed.     

Fundamental reflection spectrum and the electronic band structure of chlorine-doped CdTe

The effect of chlorine impurity on the fundamental reflection spectrum and the electronic band structure of cadmium telluride crystals has been studied. At the impurity concentration N _Cl>5.0×10¹⁹ cm^?3, a peak appears in the reflectance spectra. This peak is due to electron transitions at the X point of the Brillouin zone from the upper split valence band to Cl levels lying 0.05 eV above the Γ minimum of the conduction band. The other features in the reflectance spectra and band structure are explained as being due to the effect of spin-orbit splitting at the X point and to indirect electronic transitions from the Cl levels to the Γ minimum.     

Energy band structure and refractive properties of LiRbSO4 crystals

The energy band structure of mechanically free and compressed LiRbSO₄ single crystals is investigated. It is established that the top of the valence band is located at the D point of the Brillouin zone [k = (0.5, 0.5, 0)], the bottom of the conduction band lies at the Γ point, and the minimum direct band gap E _g is equal to 5.20 eV. The bottom of the conduction band is predominantly formed by the Li s, Li p, Rb s, and Rb p states hybridized with the S p and O p antibonding states. The pressure coefficients corresponding to the energies of the valence and conduction band states and the band gap E _g are determined, and the pressure dependences of the refractive indices n _i are analyzed.     

Tailoring the photocatalytic activity of WO3 by Nb-F codoping from first-principles calculations

In this letter, the electronic structure properties of Nb, F monodoping and Nb-F codoping are explored by first-principles calculations. Our results show that Nb-F codoping can reduce the band gap notably. The band edge analysis indicates that both conduction band maximum (CBM) and valence band minimum (VBM) move to higher energies, which is desirable for water splitting. The formation energy and pair binding energy calculation shows that this anion-cation codoping is easy to realize in both O-rich and O-poor conditions. The calculated optical absorption spectra indicate that the visible light absorption can be significantly improved by Nb-F codoping in WO₃. Therefore, Nb-F co-doped WO₃ is predicted to be a promising visible light photocatalyst for water splitting.     

Electronic structure and magnetic properties of the quaternary perovskites LnMn3V4O12 (Ln = La,Nd and Gd)

ABSTRACT

Structural, electronic and magnetic properties of the quaternary perovskites LnMn₃V₄O₁₂ (Ln?=?La, Nd and Gd) are calculated using generalised gradient approximation along with Hubbard potential (GGA?+?U) within the frame work of density functional theory (DFT). It is observed that the calculated lattice constants are decreases as going from La→Gd due to the lanthanide’s contraction and found consistent with the experiments. The electron charge densities show that the Ln—O bond is ionic whereas the bond between Mn/V—O is covalent. The metallic nature of these compounds is confirmed by the overall band structures. The magnetic susceptibility curves show that all these compounds are anti-ferromagnetic and the exchange interactions play vital role in the magnetic properties of these perovskites. Furthermore, the electrical resistivities calculated by BoltzTrap code also verify the metallic nature of all these compounds. This study also confirms that in these compounds Mn 3d-states electrons are responsible for the magnetic behaviour whereas V 3d-states electrons for the electronic behaviour.     

Electronic structures and effective masses of photogenerated carriers of CaZrTi2O7 photocatalyst: First-principles calculations

The band structures, density of states and effective masses of photogenerated carriers for CaZrTi₂O₇ photocatalyst were performed using first principles method with the virtual crystal approximation. The results indicated that CaZrTi₂O₇ has an indirect band gap of about 3.25 eV. The upper valence bands of CaZrTi₂O₇ are formed by O 2p states mixed with Ti 3d states, Zr 4d, 4p and 5s states, while the conduction bands are dominated by Ti 3d states, Zr 4d states and O 2p states. The calculated valence bands maximum (VBM) potential is located at 2.60 V (vs. normal hydrogen electrode (NHE)), while the conduction bands minimum (CBM) potential at ?0.65 V. Therefore, CaZrTi2O7 has the ability to split water to hydrogen and oxygen under UV light irradiation. The calculated minimum effective mass of electron in CBM is about 1.35 m₀, and the minimum effective mass of hole in VBM is about 1.23 m₀. The lighter effective masses facilitate the migration of photogenerated carriers and improve photocatalytic performance.