Well-defined protein-polymer conjugates via in situ RAFT polymerization

Biotechnology, biomedicine, and nanotechnology applications would benefit from methods generating well-defined, monodisperse protein-polymer conjugates, avoiding time-consuming and difficult purification steps. Herein, we report the in situ synthesis of protein-polymer conjugates via reversible addition-fragmentation chain transfer polymerization (RAFT) as an efficient method to generate well-defined, homogeneous protein-polymer conjugates in one step, eliminating major postpolymerization purification steps. A water soluble RAFT agent was conjugated to a model protein, bovine serum albumin (BSA), via its free thiol group at Cys-34 residue. The conjugation of the RAFT agent to BSA was confirmed by UV-visible spectroscopy, matrix-assisted laser desorption ionization--time of flight (MALDI-TOF), and 1H NMR. BSA-macroRAFT agent was then used to control the polymerization of two different water soluble monomers, N-isopropylacrylamide (NIPAAm) and hydroxyethyl acrylate (HEA), in aqueous medium at 25 degrees C. The growth of the polymer chains from BSA-macroRAFT agent was characterized by size exclusion chromatography (SEC), 1H NMR, MALDI-TOF, and polyacrylamide gel electrophoresis (PAGE) analyses. The controlled character of the RAFT polymerizations was confirmed by the linear evolution of molecular weight with monomer conversion. The SEC analyses showed no detectable free, nonconjugated polymer formation during the in situ polymerization. The efficiency of BSA-macroRAFT agent to generate BSA-polymer conjugates was found to be ca. 1 by deconvolution of the SEC traces of the polymerization mixtures. The structural integrity and the conformation-related esterase activity of BSA were found to be unaffected by the polymerization conditions and the conjugation of the polymer chain. BSA-poly(NIPAAm) conjugates showed hybrid temperature-dependent phase separation and aggregation behavior. The lower critical solution temperature values of the conjugates were found to increase with the decrease in molecular weight of poly(NIPAAm) block conjugated to BSA.     

Temperature-regulated activity of responsive polymer-protein conjugates prepared by grafting-from via RAFT polymerization

A facile route to well-defined "smart" polymer-protein conjugates with tunable bioactivity is reported. Protein modification with a reversible addition-fragmentation chain transfer (RAFT) agent and subsequent room temperature polymerization in aqueous media led to conjugates of poly(N-isopropylacrylamide) and a model protein. Representing the first example of polymer-protein conjugation with RAFT agent immobilization via the "R-group" approach, high molecular weight and reductively stable conjugates were accessible without extensive purification or adverse effects on the protein structure. An increase in molecular weight with conversion was observed for the chains grafted from the protein surface, confirming the controlled nature of the polymerization. The responsive behavior of the immobilized polymer facilitated conjugate isolation and also allowed environmental modulation of bioactivity.     

pH-labile sheddable block copolymers by RAFT polymerization: Synthesis and potential use as siRNA conjugates

Well-defined amphiphilic block copolymers composed of hydrophilic and hydrophobic blocks linked through an acid-labile acetal bond were synthesized directly by RAFT polymerization using a new poly(ethylene glycol) (PEG) macroRAFT agent modified with an acid-labile group at its R-terminal. The new macroRAFT agent was used for polymerization of poly(t-butyl methacrylate) (PtBMA) or poly(cholesterol-methacrylate) (PCMA) to synthesize well-defined block copolymers with a PEG block sheddable under acidic conditions. The chain extension polymerization kinetics showed known traits of RAFT polymerization. The molecular weight distributions of the copolymers prepared using the new macroRAFT agent remained below 1.2 during the polymerizations and the molecular weight of the copolymers was linearly proportional to monomer conversions. The acid-catalyzed hydrolysis behavior of the PEG-macroRAFT agent and the PEG-b-PtBMA (Mn = 13,600 by GPC, PDI = 1.10) was studied by GPC, ¹H NMR and UV–vis spectroscopy. The half-life of acid-hydrolysis was 70 min at pH 2.2 and 92 h at pH 4.0. The potential use of the pH-labile shedding behavior of the copolymers was demonstrated by conjugating a thiol-modified siRNA to ω-pyridyldisulfide modified PEG-b-PCMA. The resultant PEG-b-PCMA-b-siRNA triblock modular polymer released PCMA-b-siRNA segment in acidic and siRNA segment in reductive conditions, as confirmed by polyacrylamide gel electrophoresis.     

Reversible polymerization driven by folding

Bisfunctionalized m-phenylene ethynylene imine oligomers were polymerized in the polar solvent acetonitrile, resulting in high-molecular weight poly(m-phenylene ethynylene imine)s. It is hypothesized that this polymerization, which proceeds through the reversible metathesis of imine bonds, is driven by the folding of the long m-phenylene ethynylene imine chains. Upon conducting the polymerization in a series of solvents in which the m-phenylene ethynylene oligomers exhibit different folding stabilities, it was possible to correlate the molecular weight of the resulting poly(m-phenylene ethynylene imine)s with the helical stability of the corresponding oligomers. The polymerization was also demonstrated to be reversible and responsive to solvent and temperature changes.     

丙烯酰胺基偶氮苯的RAFT聚合反应动力学

以丙烯酰胺基偶氮苯(AAAB)为单体,二硫代苯甲酸异丙苯酯(CDB)为链转移剂,偶氮二异丁腈(AIBN)为引发剂,N,N-二甲基甲酰胺(DMF)为溶剂,利用可逆加成-断裂链转移(RAFT)聚合法合成了侧链含有偶氮苯基团的聚丙烯酰胺基偶氮苯(PAAAB),同时考察了反应温度、引发剂浓度、链转移剂浓度等因素对聚合反应的影响。利用FT-IR、1H NMR、GPC等对其结构进行了表征。结果表明,聚合反应动力学曲线呈良好的线性关系,分子量分布窄;随着[CDB]/[AIBN]比例的增大,聚合速率、分子量和分子量分布均下降。     

Building nanostructures using RAFT polymerization

Reversible addition fragmentation chain transfer (RAFT) polymerization is one of the most extensively studied controlled/living radical polymerization methods that has been used to prepare well‐defined nanostructured polymeric materials. This review, with more 650 references illustrates the range of well‐defined functional nanomaterials that can be accessed using RAFT chemistry. The detailed syntheses of macromolecules with predetermined molecular weights, designed molecular weight distributions, controlled topology, composition and functionality are presented. RAFT polymerization has been exploited to prepare complex molecular architectures, such as stars, blocks and gradient copolymers. The self‐assembly of RAFT‐polymer architectures has yielded complex nanomaterials or in combination with other nanostructures has generated hybrid multifunctional nanomaterials, such as polymer‐functionalized nanotubes, graphenes, and inorganic nanoparticles. Finally nanostructured surfaces have been described using the self‐organization of polymer films or by the utilization of polymer brushes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Block copolymers containing organic semiconductor segments by RAFT polymerization

Approaches to the synthesis of block copolymers containing organic semiconductor segments (polythiophene, perylene diimide) by RAFT polymerization have been explored. A method involving transformation of a vinyl derivative to a macro-RAFT agent provides for the synthesis of block copolymers which are joined by a short non-hydrolysable linkage.     

Butyl acrylate RAFT polymerization in miniemulsion

Few successes about butyl acrylate (BA) RAFT miniemulsion homopolymerization were reported, even though styrene, methyl methacrylate, and vinyl acetate had been successfully applied in reversible addition fragmentation transfer (RAFT) miniemulsion polymerization. In this article, four types of RAFT agent with various designed R and Z groups [benzyl dithioisobutyrate (BDIB), 1-phenylethyl phenyldithioacetate (PEPDTA), cumyl dithioisobutyrate (CDIB), benzyl dithiobenzoate] were used to mediate BA miniemulsion polymerization using the conditions (5 wt % hexadance and sodium dodecyl sulfate) effective for styrene and methyl methacrylate systems. All four types of the RAFT agents effectively control over the bulk polymerization. In contrast, only BDIB resulted in a rather narrow molecular weight distribution in the miniemulsion polymerization. A pronounced inhibition and rate retardation were observed in both bulk and miniemulsion polymerizations mediated by CDIB and benzyl dithiobenzoate. When compared with the bulk polymerization, a much longer inhibition period (over eight times) was observed in the CDIB-mediated miniemulsion polymerization. It was concluded that only the RAFT agent with the primary R group and Z group with less stabilizing ability to the intermediate radicals is effective to mediate BA miniemulsion polymerization in terms of achieving a narrow molecular weight distribution and short inhibition period. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2304–2315, 2007     

Photoinitiated RAFT polymerization of vinyl acetate

A photoinitiation process was investigated to develop a rapid and well‐controlled RAFT polymerization method applied to vinyl acetate (VAc) using methyl (ethoxycarbonothioyl)sulfanyl acetate (MESA) and bis(2,4,6‐trimethylbenzoyl)phenylphosphine oxide as the RAFT agent and photoinitiator, respectively. MESA was selected as the photochemically inert RAFT agent to minimize photolysis of the thiocarbonylthio groups during polymerization. Poly(vinyl acetate) with a prespecified well‐controlled molecular weight (MW) and a narrow MW distribution was successfully synthesized. The polymerization reaction proceeded as a living polymerization and was remarkably rapid compared with approaches that use thermally initiated processes with a very short induction period. A detailed kinetic study of the mechanism underlying the polymerization reaction, however, revealed that the chain ends containing xanthate moieties were not perfectly stable upon UV‐irradiation, and they generated radicals via homolytic cleavage. This reaction appeared to proceed by a combination of a degenerative transfer RAFT mechanism and a dissociation‐combination mechanism. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functional and tuneable amino acid polymers prepared by RAFT polymerization

We report the application of reversible addition‐fragmentation chain transfer polymerization using a novel chain transfer agent toward the synthesis of a variety of copolymers containing proline‐derived monomeric units. This methodology enables ready access to a number of polymeric species with narrow molecular weight distributions, reliable functional unit incorporations, and high conversions. The methodology is also a facile approach to novel copolymeric species incorporating amino acids, which possess unique material properties and the potential for further organocatalytic application. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Carbazyl RAFT agents synthesized by an improved aqueous phase method and their applications in RAFT polymerization

A series of carbazyl dithiocarbamates as RAFT agents, i.e. benzyl 9H-carbazole-9-carbodithioate (B), 1-phenylethyl 9H-carbazole-9-carbodithioate (C), cumyl 9H-carbazole-9-carbodithioate (D) and tert-butyl 9H-carbazole-9-carbodithioate (E), were successfully synthesized by an improved aqueous phase method based on a nucleophilic substitution reaction between sodium carbazole-9-carbodithioate (A) and alkyl halides at room temperature. Furthermore, the optimum reaction conditions and synthetic technology were sought. Compared with the traditional oil-phase method, the expected high-purity RAFT agents were obtained in the form of crystal that was precipitated and separated from the aqueous solution, so that vast organic solvents for purification were avoided. The activities of the carbazyl dithiocarbamates obtained as RAFT agents for the polymerizations of both styrene and methyl methacrylate were determined. The results show that all of the RAFT agents above mentioned are of significant activity in the RAFT polymerization of styrene, but only D has obvious activity in the RAFT polymerization of methyl methacrylate. Therefore, both the novel synthetic method and the carbazyl dithiocarbamates obtained possess potential application in the RAFT polymerization.     

Encapsulated clay particles in polystyrene by RAFT mediated miniemulsion polymerization

RAFT grafted montmorillonite (MMT) clays [i.e., N,N‐dimethyl‐N‐(4‐(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium‐MMT (PCDBAB‐MMT) and N‐(4‐((((dodecylthio)carbonothioyl)thio)methyl)benzyl)‐N,N‐dimethylethanammo‐nium‐MMT (DCTBAB‐MMT)] of various loadings were dispersed in styrene (S) monomer and the resultant mixtures emulsified and sonicated in the presence of a hydrophobe (hexadecane) into miniemulsions. The stable miniemulsions thus obtained were polymerized to yield encapsulated polystyrene‐clay nanocomposites (PS‐CNs). The molar mass and polydispersity index (PDI) of the PS‐CNs depended on the amount of RAFT agent in the system, in accordance with the features of the RAFT process. The morphology of the PS‐CNs ranged from partially exfoliated to an intercalated morphology, depending on the percentage clay loading. The thermomechanical properties of the PS‐CNs were better than those of the neat PS polymer, and were dependent on the molar mass, PS‐CN morphology and clay loading. The similarities and differences of the PS‐CNs prepared here by miniemulsion polymerization were compared to those prepared using the same RAFT agents and polymer system by bulk polymerization (as reported by us in a previous article). © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7114–7126, 2008     

Controlled bimodal molecular-weight-distribution polymers: facile synthesis by RAFT polymerization

The RAFT agents RAFT-1 and RAFT-2 were used for RAFT polymerization to synthesize well-defined bimodal molecular-weight-distribution (MWD) polymers. The system showed excellent controllability and "living" characteristics toward both the higher- and lower-molecular-weight fractions. It is important that bimodal higher-molecular-weight (HMW) polymers and block copolymers with both well-controlled molecular weight (MW) and MWD could be prepared easily due to the "living" features of RAFT polymerization. The strategy realized a mixture of higher/lower-molecular-weight polymers at the molecular level but also preserved the features of living radical polymerization (LRP) of the RAFT polymerization.     

In situ molecular level visualization of RAFT polymerization by AIEgen-labelled agents

正Can we see clearly the whole polymerization process?Normally, it is difficult and thus is a dream for researchers in polymer science. That is why techniques for monitoring the polymerization process have always been a major focus in both academic and industrial field owing to their potential for quality control and process optimization. Several methods,such as rheometry, viscometry and dilatometry, have been developed to study the kinetics of polymerization process.However, these methodologies examine only the macroscopic viscosity instead of at the molecular level. Online     

Shell-crosslinked nanoparticles through self-assembly of thermoresponsive block copolymers by RAFT polymerization

A reversible addition-fragmentation chain transfer (RAFT) agent, the methyl-2-(n-butyltrithiocarbonyl)propanoate (MBTTCP) has shown to be efficient in controlling the polymerization of N,N-dimethylacrylamide (DMA), N-isopropylacrylamide (NIPAM) and N-acryloyloxysuccinimide (NAS). Two different strategies have been studied to synthesize block copolymers based on one PNIPAN block and the other a random copolymer of DMA and NAS. When a PNIPAM trithiocarbonate-terminated is used as macromolecular chain transfer agent for the polymerization of a mixture of NAS and DMA, well-defined P(NIPAM-b-(NAS-co-DMA)) block copolymers were obtained with a low polydispersity index. These thermoresponsive block copolymers dissolved in aqueous solution at 25 °C and self-assembled into micelles when the temperature was raised above the LCST of the PNIPAM block. The micelle shell containing NAS units was further crosslinked using a primary diamine in order to get shell-crosslinked nanoparticles. Upon cooling below the LCST of PNIPAM this structure may easily reorganize to form nanoparticles with a water filled hydrophilic core.     

Living radical miniemulsion polymerization by RAFT in the presence of beta-cyclodextrin

Living radical polymerization of styrene in a miniemulsion by reversible addition–fragmentation chain transfer (RAFT) was successfully realized in the presence of beta-cyclodextrin (CD), using sodium dodecyl sulfate and hexadecane as surfactant and costabilizer, respectively. The drawback of instability (red layer formation) encountered in the living radical polymerization in emulsion or miniemulsion was overcome. The linear relationship between the monomer conversion and the molecular weight, as well as lower molecular weight distribution (MWD), shows that the polymerization process was under control. The addition of CD was found to have little influence on the polymerization rate. However, MWD of the polymer synthesized is obviously decreased. The mechanism of stability and controllability improvement in the presence of CD proposed that the complex formation between CD and RAFT agent or RAFT agent-ended oligomer increased their diffusion ability from monomer droplet to polymerization locus and improved the homogeneity of the RAFT agent level among the polymerization loci.