氨基富π电子醚链的合成与超分子性能研究

合成、表征了含氨基的富π电子醚链四甘醇-二(2-氨基-4-苄氧基)苯基醚(5),并与不同的缺π电子联吡啶环蕃CPQT、FCPQT、5FCPQT作用形成了新型准轮烷5.CPQT、5.FCPQT、5.5FCPQT。利用核磁共振技术研究了它们在温度和酸碱调控下的分子开关功能。     

插销式分子器件——可利用酸碱调控的超分子准轮烷

含有吗啉的富π电子苯醚链化合物与缺π电子联吡啶环玢CPQT通过分子间的π-π堆积作用形成超分子准轮烷结构。研究发现,随着温度的变化,该准轮烷结构的相对运动速度加快,弱相互作用减弱;并进一步发现,随着酸和碱的依次加入,该准轮烷结构呈现"开"与"关"的"插销式"器件性能。     

可利用酸碱调控的分子器件富——电子二苯醚客体和缺电子联吡啶大环组成的准轮烷的“开”与“关”

利用π-π堆积作用,富电子4,4′-二氨基二苯醚(A)和4,4′-二羟基二苯醚(B)分别与缺电子联吡啶大环(CPQT)自组装成准轮烷A-CPQT和B-CPQT;利用酸碱调控准轮烷A-CPQT的“开”与“关”,此过程可利用体系的核磁共振氢谱的化学位移变化进行跟踪.     

含丁三醇端基富电子醚链与阳离子环蕃超分子准轮烷的表征和性能研究

以4-(2-(4-(苄氧基)苯氧基)乙氧基)-1,2,3-丁三醇(C)为富电子供体的醚链,与缺电子联吡啶大环化合物环双(百草枯-亚苯基)四阳离子环蕃(CPQT)和四氟取代环蕃(4FCPQT)自组装形成超分子准轮烷C(CPQT)和C(4FCPQT),并利用1HNMR的化学位移变化来研究两种不同准轮烷在温度变化时它们的相互作用。实验结果表明,由于富电子供体的一端含有3个羟基,易和缺电子联吡啶大环形成氢键,因此醚链的丁三醇端不能进入大环;缺电子联吡啶大环的一个苯环上的氢被氟取代后,由于电场力的作用,使富电子供体进入大环的概率相对降低,并使富电子醚链供体穿入大环的位置发生"偏心"作用。     

可利用酸碱控制的分子器件：准轮烷的“开”与“关”

4,4‘－二氨基二苯醚衍生物（A）和缺电子联吡啶大环（CPQT）发生π-π堆积作用进行自组装形成准轮烷;准轮烷的“开”与“关”可以利用酸碱调控。此过程可利用体系的氢的化学位移变化来进行跟踪。     

盒状主体缺电子联吡啶大环的性质、应用和制备

详细描述了盒状主体缺π电子联吡啶大环CPQT的结构和性质,总结比较了它的各种制备方法,并对其与富π电子氢醌醚链衍生物自组装合成索烃、轮烷和准轮烷等方面的应用进行了综述.     

缺电子联吡啶环蕃与富电子苯醚链的结合能

采用分子动力学方法模拟了缺电子联吡啶环蕃(CPQT)和不同富电子苯醚链分子形成的准轮烷在乙腈溶液环境下的结构和相互作用. 分别利用AM1和密度泛函理论(DFT)的B3LYP/6-31+g方法优化了环蕃分子的结构, 并将获得的电荷导入分子动力学软件中. 通过计算发现, CPQT和不同富电子苯醚链分子的结合能大小排序为BHEEB·CPQT>BHEB·CPQT>1/4DMB·CPQT. 随着温度的升高, 富电子苯醚链在环蕃中运动加剧, 准轮烷稳定性下降, 计算结果与实验结果一致.     

准轮烷和轮烷研究新进展

准轮烷和轮烷是一个在超分子化学中非常活跃的新领域.它们具有的特殊结构决定了准轮烷和轮烷在纳米功能材料和分子机器等方面有很大的应用潜力,因此倍受化学家们的关注.根据形成轮烷和准轮烷时主要驱动力的不同,可将轮烷和准轮烷的制备方法分为统计学缠绕、化学转移、受氢键驱动、受亲水-疏水相互作用驱动、受金属配位作用驱动、和受π-π堆积相互作用以及电荷转移驱动等.本文分别从上述几种驱动力的角度综述了近年来准轮烷和轮烷在合成和应用方面的最新研究进展.     

可利用酸碱调控的分子器件—富电子二苯醚客体和缺电子联吡啶大环组成的准轮

利用π－π堆积作用,富电子４,４‘－二氨基二苯醚（Ａ）和４,４‘－二羟基二苯醚（Ｂ）分别与缺电子联吡啶大环（ＣＰＱＴ）自组装成准轮烷Ａ－ＣＰＱＴ和Ｂ－ＣＰＱＴ;利用酸碱调控准轮烷Ａ－ＣＰＱＴ与“开”与“关”,此过程可利用体系的核磁共振氢谱的化学永化进行跟踪。     

二芳基氨(硼)-π-碳硼烷三元化合物的二阶非线性光学性质的理论研究

采用密度泛函理论(DFT)方法对二芳基氨(硼)-π-十二顶点碳硼烷三元化合物的结构及二阶非线性光学(NLO)性质进行计算.结果表明,化合物共轭桥长度及二芳基氨(硼)对化合物偶极矩的影响较小.随着分子共轭桥的增长,分子的电子空间范围R2增大,从而使极化率和第一超极化率增大.通过分析化合物的电子光谱和对应的分子轨道组成可知,分子中电荷转移主要发生在二芳基氨(硼)和π-桥之间,碳硼烷的贡献较少.二芳基氨和二芳基硼的供电子能力差异可以调节分子的二阶NLO响应.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.