Amphiphilic urethane acrylate hydrogels having heterophasic gel structure: swelling behaviors and mechanical properties

 Amphiphilic urethane acrylate hydrogels containing ionic group (dimethylopropionic acid, DMPA) were prepared by varying the molecular weight of the soft segment (polyether type, PTMG) and type of diisocyanate, and their swelling behaviors and mechanical properties were examined. They showed amphiphilic property due to the hydrophilic ionic groups and hydrophobic polyethers comprising the urethane acrylate network. Heterophasic gel structure could be found for the hydrogels prepared in water, but not for the hydrogels in organic solvent (1,4-dioxane), through scanning electron microscopy. Because of this heterophasic gel structure, they were able to take in a large amount of water as well. The hydrophobic interaction generated by the polyether soft segments between urethane acrylate network chains decreased the degree of swelling, however, increased reversibly the tensile strengths at equilibrium swelling state. MDI-based hydrogel showed low swelling ratio and high tensile strength because of its ordered hard domain structure. These amphiphilic urethane acrylate hydrogels showed salt- and pH-dependent swelling behaviors. Received: 26 September 1997 Accepted: 24 December 1997     

Mechanical properties and morphology of homoblends of a poly(ethyl acrylate) ionomer having one ion pair per ionic repeat unit and a poly(ethyl acrylate) ionomer having two ion pairs

The mechanical properties and morphology of homoblends of poly(ethyl acrylate‐co‐acrylate) (PEAA) having one ion pair per ionic monomer repeat unit and poly(ethyl acrylate‐co‐itaconate) (PEAITA) having two ion pairs were investigated. It was found that the compositional variation in the ionomer homoblends did not affect the matrix or cluster glass transition temperatures of the two ionomers of the homoblends. It was also observed that the ionomer homoblends showed two ionic plateaus and that the changes in the two ionic moduli were directly related to the relative amounts of the two ionomers. The ionic moduli calculated with the model for filler‐dispersed materials were found to fit the experimental data to a great extent. Therefore, it was suggested that the PEAITA/PEAA ionomer homoblends were filler‐containing composite materials rather than miscible blends. In the X‐ray scattering study, it was observed that the morphology of the ionomer homoblends was not affected by mixing. The results obtained in this work might be useful for the modification of the storage moduli of copolymers in a certain temperature range without the alteration of their processing temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1045–1052, 2007.     

Effect of sol–gel synthesis conditions on the physical properties of silica hydrogels

1. Download : Download high-res image (100KB)
2. Download : Download full-size image

     

Mechanical properties of gradient copolymers of styrene and n‐butyl acrylate

The mechanical properties of linear and V‐shaped compositional gradient copolymer of styrene and n‐butyl acrylate with composition of around 55 wt % styrene were investigated by comparing with their block copolymer counterparts. Compared with their block copolymer counterparts, the gradient copolymers showed lower elastic modulus, much larger elongation at break, and similar ultimate tensile strength at room temperature. This performance could be ascribed to that the local moduli continuously change from the hardest nanodomains to the softest nanodomains in the gradient copolymer, which alleviates the stress concentration during tensile test. Compared with the V‐shaped gradient (VG) copolymer, the linear gradient copolymer showed much higher elastic modulus but lower elongation at break. The mechanical properties of the gradient copolymers were more sensitive to the change in temperature from 9 °C to 75 °C. With recovery temperature increased from 10 °C to 60 °C, the strain recovery of VG copolymer would change steadily from 40% to 99%. However, the elastic recovery of linear and triblock copolymer was poor even at 60 °C. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 860–868     

Ultraviolet-curable epoxy acrylate dispersions: effect of urethane acrylate anionomers on stabilizing and film properties

 Epoxy acrylate dispersions stabilized using urethane acrylate anionomers were prepared for an application of ultraviolet (UV) curing. By observing the optical microscopy and colloidal stability for the epoxy acrylate dispersions, it was confirmed that the urethane acrylate anionomers incorporated have an interfacial activity in the interface between the epoxy acrylate oil and the water/ ethanol mixture (80/20, w/w). This was possible by the structurally designed urethane acrylate anionomers, containing a hydrophobic soft segment and two hydrophilic ionic sites in their molecules. In addition, when ultraviolet (UV)-cured, the urethane acrylate anionomers agglomerated to form the rubber domains in the epoxy acrylate film, which were induced by the ionic interaction. Consequently, this agglomerated rubber domains improved the final film properties. Received: 4 April 1998 Accepted: 1 July 1998     

Mechanical and temperature dependant properties, structure and phase transitions of elastic polypropylenes

A new metallocene catalyst applied to propene polymerization provides an expansion of the properties of polypropylene (PP) by generating semi-crystalline materials having 0-60% crystallinity. The purpose of the present study was to investigate such low crystalline elastomeric polypropylene (ePP) samples in order to compile further information on their crystal structure and the related phase transitions in the temperature range of 298-423 K.Calorimetric and stress strain measurements of mentioned ePP in comparison with high crystalline PP (X_c = 62%) confirms the new class of low crystalline PPs. These polymers combine the properties of a thermoplast, like excellent processability and ductility using heat, with those of elastomers. Temperature dependant WAXS investigations were carried out to determine crystallinity, crystalline structure, crystal modifications and crystal size in the temperature range from 298 to 423 K. As a function of temperature, apparent α- and γ-crystalline modifications were correlated and discussed concerning the phase transitions observed calorimetrically. The presented study includes calorimetric, tensile and X-ray scattering measurements of five metallocene PPs with crystallinities of 0%, 5%, 18%, 36% and 62%.     

Influence of chemical composition of amide block on the thermal properties and structure of terpolymers

Multiblock terpolymers -(PBT-b-PTMO-b-PA12.10)_n- comprising the polymer systems in which one of the three blocks (PBT) is not soluble in the hard phase of PA12.10 blocks but is slightly soluble in the soft phase of PTMO blocks have been obtained. The DSC and DMTA method was applied to investigate the thermal properties of these polymers and it was found that the PBT block acts as an element that produce stiffness of -(PBT-b-PTMO-b-PA12.10)_n- structure. The terpolymers were compared with the previously described [5] -(PBT-b-PTMO-b-PA12)_n- elastomers, in which the rigid PBT block (DP > 7) dissolves in the hard phase of PA12 blocks and partly dissolves in the soft phase. It was found that even a small change in the chemical structure of the amide block influences significantly on the structure, phase separation and the properties of terpolymers. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mechanical properties and inhomogeneous nanostructures of dicyandiamide-cured epoxy resins

Dicyandiamide (DICY)-cured epoxy resins are important materials for structural adhesives and matrix resins for fiber reinforced prepregs. The objective of this study was to examine the mechanical and physical properties as well as the gel structures of the cured resins and discuss the relationships among them. Diglycidyl ether of bisphenol-A (DGEBA) oligomers were chosen as the common chemical structure of the epoxy resins. Four kinds of resin mixtures were formulated using the seven types of DGEBA oligomers having different molecular weight distributions. Three resin formulations having bimodal-type molecular weight distributions were designed to have almost identical rubbery plateau values of the storage modulus in dynamic mechanical analyses after curing, means that they had almost equivalent average crosslink density and basic chemical structure. However, the toughness, ductility, and environmental (heat and solvent) resistance of these three formulations were different. Atomic force microscopy revealed the existence of inhomogeneous nanoscale gel structures in these cured resins. The morphological differences in the gel structures in terms of their size, the connectivity, and the relative magnitude of the heterogeneity would cause the difference in several properties of the DICY-cured epoxy resins. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1425–1434, 2007     

Molecular structure and properties of click hydrogels with controlled dangling end defect

In this study, controlled amount of dangling ends is introduced to the two series of poly(ethylene glycol)‐based hydrogel networks with three and four crosslinking functionality by using click chemistry. The structure of the gels with regulated defect percentage is confirmed by comparing the results of low‐field NMR characterization and Monte Carlo simulation. The mechanical properties of these gels were characterized by tensile stress–strain behaviors of the gels, and the results are analyzed by Gent model and Mooney–Rivlin model. The shear modulus of the swollen gels is found to be dependent on the functionality of the network, and decreases with the defect percentage. Furthermore, the value of shear modulus well obeys the Phantom model for all the gels with varied percentage of the defects. The maximum extension ratio, obtained from the fitting of Gent model, is also found to be dependent on the functionality of the network, and does not change with the defect percentage, except at very high defect percentage. The value of the maximum extension ratio is between that predicted from Phantom model and the Affine model. This indicates that at the large deformation, the fluctuation of the crosslinking points is suppressed for some extend but still exists. Polymer volume fractions at various defect percentages obtained from prediction of Flory–Rehner model are found to be in well agreement with the swelling experiment. All these results indicate that click chemistry is a powerful method to regulate the network structure and mechanical properties of the gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1227–1236     

Mechanical properties and structure relationships in drawn fibers of elastomer–polyoxymethylene blends

Superdrawn fibers of an elastomer–poly(oxymethylene) (POM) blend have been prepared and investigated in terms of the structure and mechanical properties. The development of the mechanical properties along the fiber axis and the formation of a higher order structure during drawing were slightly retarded by blending, but the loop tenacity increased greatly with the elastomer content. The blend microtextures had an immiscible and phase-separated morphology in which the elastomer was dispersed in the form of streaks between the oriented POM layers, which allowed the fiber to split into smaller filaments on bending. The high loop tenacity of the blend fibers is due to an increase in the radius of curvature resulting from the filament splitting on bending, because the shear stress at the bending corner becomes higher as the radius of curvature increases. © 1997 John Wiley & Sons, Inc.     

Investigation of the structure, the optical properties, and the photophysics of some indolocarbazoles having terminal aromatic rings

Structures, optical properties, and photophysics of ladder indolo[3,2-b]carbazoles substituted symmetrically by phenylene and thiophene rings have been investigated theoretically and experimentally. The ground state optimized structures were obtained using the density functional theory (DFT) as approximated by the B3LYP functional and employing the 6-31G^* basis set. All derivatives were found nonplanar in their electronic ground states. The character and the energy of the singlet–singlet electronic transitions have been investigated by applying the time-dependent density functional theory (TDDFT) to the correspondingly optimized-ground-state geometries. The ab initio restricted configuration interaction (singles) method (RCIS/6-31G^*) was adopted to obtain the first singlet excited-state structures (S₁) of the molecule. TDDFT calculations performed on the S₁ optimized geometries was used to obtain emission energies. UV–vis and fluorescence spectroscopies were analyzed in conjunction with theoretical calculations. The computed excitation and emission energies were found in reasonable agreement with the experimental absorption and fluorescence spectra. Finally, the photophysical behavior of the indolocarbazoles have been studied by means of steady state and time resolved fluorescence. The overall data have allowed the determination of the rate constants for the radiative and nonradiative decay processes. Both theoretical and experimental data show that the replacement of phenylene rings by thiophene units induces a red shift in the absorption and fluorescence spectra. This behavior is interpreted in terms of the electron donor properties of the thiophene ring. On the other hand, the change of the substitutional pattern, from 2,8 to 3,9, causes a significant hypsochromic shift of the absorption and fluorescence bands.     

Preparation and properties of organic–inorganic hybrid gel films based on polyvinylpolysilsesquioxane synthesized from trimethoxy(vinyl)silane

Polyvinylpolysilsesquioxane (PVPS) organic–inorganic hybrid gel films comprising polyethylene and siloxane backbone linkages were prepared through two routes: trimethoxy(vinyl)silane (VTS) was first subjected to radical polymerization of the vinyl groups, followed by acid‐catalyzed hydrolytic polycondensation of the trimethoxysilyl groups (route A) to afford PVPS; in the second route PVPS was prepared in reverse order (route B). PVPS gel films were transparent and homogeneous. We find that the mechanical and heat‐resisting properties correlate both to the degree of polymerization and the degree of cross‐linking. Copyright © 2003 John Wiley & Sons, Ltd.     

Proton NMR characterization of chain structure in butylene terephthalate-ϵ-caprolactone copolyesters

A series of butylene terephthalate-ϵ-caprolactone copolyesters (BCL) with different hard-segment content were synthesized and their chain structures were carefully investigated by high resolution ¹H-NMR spectroscopy. The analysis from ¹H-NMR spectra of samples reveals that BCL chain chemical and sequence structure is specific and complicated because of the unavoidable transesterification between BT and CL segments during synthesis process and so BCL copolyesters are segmented copolyesters with certain random property as confirmed by DSC measurements. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3770–3777, 1999     

Thermal properties of multiblock thermoplastic elastomerswith oligoamide soft blocks derived from dimerized fatty acid

Two series of multiblock copolymers, poly(ester-block-amide)s (PEA) and poly(amide-block-amide)s (PAA), with the same type of oligoamide soft block were obtained. Oligoamide soft block was prepared from dimerized fatty acid and 1,6-hexamethylenediamine. Oligo(butylene terephthalate) (PBT) was used as oligoester hard block in the first series and oligolaurolactam (PA12) was oligoamide hard block in the second one. The thermal and mechanical properties of these copolymers have been investigated as functions of temperature and the hard/soft block ratio. DSC and DMTA revealed that the copolymers behaved as thermoplastic elastomers.     

Synthesis of Au/SnO2 core-shell structure nanoparticles by a microwave-assisted method and their optical properties

Au/SnO₂ core-shell structure nanoparticles were synthesized using the microwave hydrothermal method. The optical and morphological properties of these particles were examined and compared with those obtained by the conventional hydrothermal method. In microwave preparation, the peak position of the UV-visible plasmon absorption band of Au nanoparticles was red-shifted from 520 to 543 nm, due to the formation of an SnO₂ shell. An SnO₂ shell formation was complete within 5 min. The thickness of the SnO₂ shell was 10-12 nm, and the primary particle size of SnO₂ crystallites was 3-5 nm. For the core-shell particles prepared by a conventional hydrothermal method, the shell formed over the entire synthesis period and was not as crystalline as those produced, using the microwave method. The relationship between the morphological and spectroscopic properties and the crystallinity of the SnO₂ shell are discussed.     

Mechanical properties of polyamide-12 layered silicate nanocomposites and their relations with structure

The mechanical properties of polyamide-12/Cloisite 30B (PA12/C30B) nanocomposites prepared by melt compounding were studied as a function of clay volume fraction φ under various processing conditions. All measured mechanical characteristics, Young's modulus, yield stress, strain at break and stress at break, exhibit a transition at φ_p1%, identified with a percolation threshold. Also, the linear and non-linear mechanical properties appeared to depend on the degree of exfoliation of the structure, which can be tuned by the processing conditions. The three-phase Ji's theoretical model was used to predict Young's modulus as a function of clay concentration, focusing on the influence of the degree of exfoliation. Experimental yield stress data were fitted to Pukanszky's model and discussed in terms of PA12/C30B interfacial adhesion.     

Improvement of electrical properties of sol–gel derived ZnO:Ga films by infrared heating method

In this study, we investigated the influences of gallium concentration and a rapid thermal annealing process on the electrical and optical properties of ZnO:Ga (GZO) films prepared by sol–gel method. Experimental data indicated that the preferential growth directions of ZnO crystallites were the (002) and (103) axes. This phenomenon implied that the nucleation and growth behaviors of ZnO crystallites were changed by the infrared heating procedure and monoethanolamine. Furthermore, since the deposited sol films were heated simultaneously, evenly, and rapidly, dopant material Ga got the opportunity to replace Zn instead of forming oxides embedded in grain boundary areas. Thus, carrier concentration of the GZO films can be considerably enhanced while the mobility of the GZO films was not apparently affected in our experiments. It was also found that the carrier concentration was not sensitive to Ga/Zn ratio even though higher Ga concentration led to lower mobility. The best sample with a resistivity of 2.20 × 10⁻³ Ω cm and a transmittance of over 80% in visible region was achieved with 1.0 at.% Ga.     

Lu掺杂AlN的电子结构和光学性质的第一性原理研究

为了探索AlN在光电器件中的潜在应用,采用第一性原理计算了不同Lu掺杂浓度(以原子分数x表示)的AlN(Al_1-xLu_xN)的电子结构和光学性质。研究结果表明,Al_1-xLu_xN的超胞体积随着Lu掺杂浓度的增加而增加,而带隙则相反。Al_1-xLu_xN的静态介电常数在低能区随掺杂浓度的提高而提高,随后逐渐趋向一致。随着Lu掺杂浓度的增加,反射率和吸收系数的峰值强度降低,峰值向较低能量方向移动。Al_1-xLu_xN的能量损失光谱表现出明显的等离子体振荡特性,且峰值低于本征AlN。Al_1-xLu_xN的光电导率在低能区随能量的增加而急剧增加。     

Synthesis,structure and spectroscopic properties of some thiosemicarbazone complexes of platinum

Reaction of salicyldehyde thosemicarbazone (H₂L¹), 2-hydroxyacetophenone thiosemicarbazone (H₂L²) and 2-hydroxynapthaldehyde thiosemicarbazone (H₂L³) (general abbreviation H₂L, where H₂ stands for the two dissociable protons, one phenolic proton and one hydrazinic proton) with K₂[PtCl₄] afforded a family of polymeric complexes of type [{Pt(L)}_n]. Reaction of the polymeric species with two monodentate ligands (D), viz. triphenylphosphine (PPh₃) and 4-picoline (pic), yielded complexes of the type [Pt(L)(D)]. These mixed-ligand complexes were also obtained from the reaction of the thiosemicarbazones with [Pt(PPh₃)₂Cl₂] and [Pt(pic)₂Cl₂]. The crystal structure of [Pt(PPh₃)(L²)] has been determined. The thiosemicarbazone ligands are coordinated, via dissociation of the two protons, as dianionic tridentate O,N,S-donors. The [Pt(L)(D)] complexes show characteristic ¹H NMR spectra and intense absorptions in the visible and ultraviolet region. They also fluoresce in the visible region at ambient temperature.     

Role of polymer network and gelation kinetics on the mechanical properties and adsorption capacity of chitosan hydrogels for dye removal

Chitosan (CS) hydrogels are receiving growing attention as adsorbents for water purification purposes. The conditions of preparation of this class of materials play a crucial in the determination of their performances; however, this aspect is often neglected in the literature. In this study, we deal with this issue, focusing on the structure‐property relationships of CS hydrogels obtained by phase inversion method. We show that the concentration of the starting solution determines the density and strength of intermolecular interactions, and that the gelation kinetics dictates the hydrogel structure at the microscale. Consequently, even subtle changes in the preparation protocol can cause significant differences in the performances of CS hydrogels in terms of mechanical properties and dye adsorption capacity. The observed trends are often neither trivial nor monotonic. Nonetheless, we demonstrate that they can be interpreted looking at the CS network structure, which can be inferred by rheological measurements. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1843–1849