Activity of Aliphatic Diperoxy Acids in the Luminol Chemiluminescence Reaction

The activity of dilute aqueous solutions of aliphatic diperoxysuccinic, -glutaric, -adipic, and -sebacic acids in the luminol chemiluminescence reaction is studied. This activity can be detected at a low (10^–6–10^–5M) concentration of luminol in weakly alkaline solutions; it increases as the alkyl chain length of the acid decreases. The best conditions for chemiluminescence have been selected. It has been shown that individual or total diperoxy acids can be determined by luminol chemiluminescence. The determination limit for diperoxyadipic acid used as an example has been estimated at 2.0 ng/mL.     

Modifications based on coumarins III. Synthesis of diesters of karatavic and galbanic acids and mixed diesters of coumarin acids and salicylic acid with sucrose

The synthesis of 6,6′-diesters of sucrose with natural coumarins — karatavic and galbanic acids — has been achieved by the transesterification of methyl esters of these acids with monosucrose esters of the same acids, and so has that of mixed 6,6′-diesters of these coumarin acids and salicylic acid by a reaction between methyl salicylate and a monoester of the corresponding coumarin acid. The structures of the compounds obtained have been confirmed by IR, UV, PMR, and¹³C NMR spectroscopies. A. B. Bektorov Institute of Chemical Sciences, Academy of Sciences, Republic of Kazakhstan, Almaty, fax (3272) 61 57 65. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 461–465, July–August, 1998.     

Kinetics of oxidation of acidic amino acids by sodium N-bromobenzenesulphonamide in acid medium: A mechanistic approach

Kinetics of oxidation of acidic amino acids (glutamic acid (Glu) and aspartic acid (Asp)) by sodium N-bromobenzenesulphonamide (bromamine-B or BAB) has been carried out in aqueous HClO₄ medium at 30°C. The rate shows first-order dependence each on [BAB]_o and [amino acid]_o and inverse first-order on [H⁺]. At [H⁺] > 0·60 mol dm⁻³, the rate levelled off indicating zero-order dependence on [H⁺] and, under these conditions, the rate has fractional order dependence on [amino acid]. Succinic and malonic acids have been identified as the products. Variation of ionic strength and addition of the reaction product benzenesulphonamide or halide ions had no significant effect on the reaction rate. There is positive effect of dielectric constant of the solvent. Proton inventory studies in H₂O-D₂O mixtures showed the involvement of a single exchangeable proton of the OH⁻ ion in the transition state. Kinetic investigations have revealed that the order of reactivity is Asp > Glu. The rate laws proposed and derived in agreement with experimental results are discussed.     

Preparation of substituted cinnamic acids labelled with deuterium and tritium at the ring positions

A series of substituted cinnamic acids labelled at the ring positions with deuterium or tritium has been easily obtained via the Doebner modification of Knoevenagel condensation reaction between labelled benzaldehyde derivatives and malonic acid in pyridine. The substituted benzaldehyde precursors were synthesized by isotope exchange method in deuterated or tritiated water at 80 °C in acidic medium. Ring-tritiated substituted cinnamic acids with specific activity ranging from 207 GBq /5.6 Ci/ mol^–1 to 4366 GBq /118 Ci/ mol^–1 was obtained using ca. 37 GBq /1 Ci/ of HTO.     

The kinetics of the oxidation of cyclopentanone with decaneperoxysulfonic acid

The kinetics of the oxidation of cyclopentanone with decaneperoxysulfonic acid at 291–323 K in CCl₄ has been studied. The reaction is not autocatalytic, and its rate increases linearly with increases in the concentrations of each of the reagents. The addition of CF₃COOH does not affect the reaction rate. The observed results are explained within a scheme which is a special case of the well-known Baeyer-Villiger reaction mechanism established for peroxycarboxylic acids. The effective rate constant of the process has been determined: logk (L mol⁻¹ s⁻¹)=(7.6±1.7) — (42.1±9.6)/θ, where θ=2.30RT kJ mol⁻¹. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1827–1829, October, 1993.     

Dehydration of 3- and 4-aryl- substituted 3-hydroxy acids in acetic anhydride in presence of zinc chloride

The reaction of several di- and triaryl-substituted 3-aryl-3-hydroxy acids and a 4-aryl-3-hydroxy acid in acetic anhydride in the presence of anhydrous zinc chloride has been investigated. It has been shown that the reaction discovered with 3-(2′-thienyl)-substituted 3-hydroxy acids, namely, their conversion under the above stated conditions into α, β-unsaturated methyl ketones,^1,2 occurs also with 3-aryl 3-hydroxy acids but to a smaller degree due to the concurrent cyclization reaction which leads to indene-1-ones. It has been established that the unsaturated methyl-ketones obtained, containing three aromatic substituents at the CC bond, exist in s-cis-(CC, CO)-conformation. It has been found that with the 4-aryl-substituted 3-hydroxy acid almost no unsaturated ketone is obtained, whereas instead the main product is a 2,3-disubstituted 1-naphthol which is acetylated under the conditions of the reaction. Its structure has been proved by its UV, IR and NMR spectra and confirmed by the mass spectrum of the compound.     

A capillary electrophoresis detection scheme for underivatized amino acids based on luminol-BrO- chemiluminescence system

A novel chemiluminescence (CL) detection scheme has been developed for detecting underivatized amino acids following capillary electrophoresis (CE) separation. This detection was based on the inhibitory effect of amino acids on the CL reaction between luminol and BrO⁻ in alkaline aqueous solution. Detection of amino acids was accomplished with a borate-based background electrolyte at pH 9.2. The luminol was used as a component of the separation carrier electrolyte. Parameters affecting CE-CL separation and detection, such as the pH value, the concentration of electrolyte and CL reagent on the resolution were optimized. The relative standard deviation for the analysis of amino acids was less than 1.5% for the migration time and 4% for the peak height. The mass limits of detection were from 7 to 144 fmol for the 7 amino acids. This method has been applied of 7 amino acids in amino acid injection.     

Spectrophotometric and ESR methods of rhenium determination based on one electron photoreduction of Re(VII)

A possibility of photochemical reduction of Re(VII) to Re(VI) in mixture of concentrated sulfuric and hydrochloric acids has been demonstrated. The reaction mechanisms of Re(VII) photoreduction and Re^VIOCl₅ ^– complex decay have been considered from view point of acids and water content. The optimal conditions of Re^VIOCl₅ ^– stability have been found.Spectrophotometric and ESR methods of rhenium determination based on photochemical production of Re^VIOCl₅ ^– complex with the detection limit of 1g/ml have been proposed. Rhenium concentration in industrial sulfuric acid has been determined.     

Influence of the presence of surfactants and humic acid in waters on the indophenol-type reaction method for ammonium determination

This work has evaluated the influence of humic acid and/or surfactants in the quantification of ammonium in waters with the indophenol-type reaction method. Thymol has been employed with the colorimetric method for sample ammonium concentrations between 0.25 and 1 mg L⁻¹. In addition, SPE/diffuse reflectance method has been used for quantification of ammonium at low concentrations (between 0.025 and 0.25 mg L⁻¹). Matrix effect owing to humic substances were observed with the colorimetric method when the concentration was equal or higher than 25 mg L⁻¹. Lower concentrations of humic compounds produced matrix effects with the more sensitive SPE/diffuse reflectance method. Generalized H-point standard addition method (GHPSAM) was employed for evaluating the effect of humic acids and for eliminating the bias error produced by humic acids. Real water samples of different types were analyzed and accurate results for ammonium concentration were obtained with both procedures in presence or absence of humic acids. Cationic and anionic surfactants inhibited the derivatization reaction at percentages up to 0.001% and 0.5%, respectively, and non-ionic surfactants at percentages of 5.5%     

A naphthyridine-based receptor for sensing citric acid

A naphthyridine-based charge neutral receptor has been designed and synthesized. Its complexation with a series of carboxylic acids involved in the Krebs cycle has been studied by ¹H NMR, UV-vis and fluorescence methods. The receptor shows strong binding to citric acid (K_a = 1.60 × 10⁵ M⁻¹) and is also able to distinguish diastereomeric maleic acid from fumaric acid by fluorescence.     

Production of α-keto acids Part I. Immobilized cells ofTrigonopsis variabilis containing D-amino acid oxidase

Whole cells ofTrigonopsis variabilis were immobilized by entrapment in Ca²⁺-alginate and used for the production of α-keto acids from the corresponding D-amino acids. The D-amino acid oxidase within the immobilized cells has a broad substrate specificity. Hydrogen peroxide formed in the enzymatic reaction was efficiently hydrolyzed by manganese oxide co-immobilized with the cells. The amino acid oxidase activity was assayed with a new method based on reversed-phase HPLC. Oxygen requirements, bead size, concentration of cells in the beads, flow rate, and other factors were investigated in a “ trickle-bed ” reactor.     

Organo-sulfonic acid catalyzed degradation kinetics and thermodynamic studies of nylon-6 by hydrothermal method

Nylon-6 as an engineering polymer and its starting monomer are both costly. Chemical reutilization offers some economic and environmental benefits. Depolymerization of nylon-6 was carried out by the conventional technique of hydrothermal method using various organo-sulfonic acids such as Methane sulfonic acid (MSA), para-toluene sulfonic acid (p-TSA), benzene sulfonic acid (BSA), and tetra-butyl ammonium bromide (TBAB) as a phase transfer catalyst. Various parameters such as temperature, time, normality of acids, and phase transfer catalyst concentration were varied to optimize its parameters, and characterization techniques such as amine value titrations and Fourier transform infrared spectroscopy were used for quantitative measurements. Solid-state ¹³C NMR was done for structure confirmation. A chemical kinetics interpretation shows degradation mechanism follows first-order kinetics under various catalysts. MSA has the highest reaction rate of 8.49 × 10^?2 h^?1 at 90°C; it decreases to 7.72 × 10^?2 h^?1 at 100°C. At the same time, aromatic Sulfonic acids such as p-TSA and BSA have a higher reaction rate of 8.995 × 10^?2 h^?1 and 5.582 × 10^?2 h^?1, respectively. The activation energy was lowered as the acidity of organo-sulfonic acids increased as benzene sulfonic acid has the lowest E_a. Followed by p-TSA, and MSA has the highest E_a. Free energy shows a similar kind of value. A simple theoretical model was used to calculate the activation energy. Thermodynamic parameters such as heat of enthalpy and entropy of reaction were evaluated using the Eryig–Polanyi equation. The combined catalytic effect of organo-sulfonic acids and phase-transfer catalyst provides a better environment-friendly method for depolymerizing nylon-6.     

Electrogenerated-bases promoted electrochemical synthesis of N-bromoamino acids from imines and carbon dioxide

In this paper, the one-step synthesis of N-bromoamino acids has been developed by electrolyzing imines and carbon dioxide (4 MPa). The electrosynthesis was performed in an undivided cell with Ni cathode and Al sacrificial anode containing n-Bu₄NBr–DMF as supporting electrolyte with a constant current at room temperature. The N-bromoamino acids were afforded in moderate to good yields rather than traditional α-amino acids. To explore the truth, some influenced factors (cathode materials, supporting electrolyte, and electricity etc.) were investigated. The experimental results indicated that the NH group of the α-amino acid could be deprotonated by alkyl anion R⁻ (carbanion, a strong base), followed by the oxidation of hypobromous acid resulted from the two-step oxidation of the bromide ion at the anode, and produced the N-bromoamino acid. Finally, the reaction mechanism was briefly discussed.     

Catalytic decomposition of aliphatic peroxy acids

The catalytic decomposition of peroxy acids is studied in various solvents in the presence of manganese, cobalt, chromium, nickel, and copper acetates and cerium benzoate. The catalytic activity of the salts in peroxy acid decomposition decreases in the order Mn²⁺ > Co²⁺ > Ce³⁺ > Cr³⁺ > Ni²⁺ > Cu²⁺. The apparent activation energies of the catalytic decomposition of peroxydecanoic acid range between 45.9 and 88.0 kJ/mol. The reaction medium has an effect both on the apparent rate constant and on the activation energy of the reaction. The reaction mechanism includes the fast formation of a catalyst-peroxy acid intermediate complex, which decomposes to release a catalyst molecule and forms the reaction products. The oxidation state of the metal ion of the catalyst can change. The introduction of compounds capable of forming complexes with metal ions of the catalyst substantially slows down the catalytic decomposition.     

A step-economic and one-pot access to chiral Cα-tetrasubstituted α-amino acid derivatives via a bicyclic imidazole-catalyzed direct enantioselective C-acylation

C^α-Tetrasubstituted α-amino acids are ubiquitous and unique structural units in bioactive natural products and pharmaceutical compounds. The asymmetric synthesis of these molecules has attracted a lot of attention, but a more efficient method is still greatly desired. Here we describe the first sequential four-step acylation reaction for the efficient synthesis of chiral C^α-tetrasubstituted α-amino acid derivatives from simple N-acylated amino acids via an auto-tandem catalysis using a single nucleophilic catalyst. The synthetic efficiency is improved via a direct enantioselective C-acylation; the methodology affords the corresponding C^α-tetrasubstituted α-amino acid derivatives with excellent enantioselectivities (up to 99% ee). This step-economic, one-pot, and auto-tandem strategy provides facile access to important chiral building blocks, such as peptides, serines, and oxazolines, which are often used in medicinal and synthetic chemistry.

The first four-step sequential reaction for the synthesis of C^α-tetrasubstituted chiral α-amino acid derivatives via auto-tandem catalysis has been developed.     

Studies on some radical transfer reactions by entrapping the radicals as polymer end groups. II. Reactions of ȮH radicals with amino acids

The reaction of ?H radicals with a number of aliphatic amino acids has been studied by entrapping the resultant radicals as end groups of poly(methyl methacrylate) that have been detected and estimated by the sensitive dye partition technique. The rate constants of the reaction (in mol^?1 L S^?1) of 7 amino acids at 25°C and at pH 1.00 have been determined as 8.33 × 10⁸ for glycine, 2.56 × 10⁹ for β-alanine, 2.01 × 10⁹ for β-alanine, 3.99 × 10⁹ for 4-amino butyric acid, 7.56 × 10⁹ for (1+) valine, 1.42 × 10¹⁰ for (1?) leucine, and 5.98 × 10¹⁰ for 6-amino caproic acid. Glycine, α-alanine, β-alanine, and 4-amino butyric acid produced radicals that underwent deamination and incorporated only carboxyl-bearing end groups in the polymer. The other amino acids, leucine, valine, and 6-amino caproic acid, produced at least two types of radicals, radicals that underwent deamination and those that remained intact, and incorporated in the polymer both carboxyl- and amine-bearing end groups but in different amounts. The latter type of radicals were about 29% from 6-amino caproic acid, 23% from leucine, and 18% from valine. The change of pH from 0.80 to 2.72 did not produce any significant change in the end group profile of the polymer obtained, indicating no appreciable change in the rate of the reaction of ?H radicals with the simplest amino acid glycine in the pH range studied.     

Kinetics and mechanism of the oxidation of formic and oxalic acids by quinolinium fluorochromate

Kinetics and mechanism of oxidation of formic and oxalic acids by quinolinium fluorochromate (QFC) have been studied in dimethylsulphoxide. The main product of oxidation is carbon dioxide. The reaction is first-order with respect to QFC. Michaelis-Menten type of kinetics were observed with respect to the reductants. The reaction is acid-catalysed and the acid dependence has the form: k_obs =a +b[H⁺]. The oxidation of α-deuterioformic acid exhibits a substantial primary kinetic isotope effect (k_H/k_D = 6.01 at 303 K). The reaction has been studied in nineteen different organic solvents and the solvent effect has been analysed using Taft’s and Swain’s multiparametric equations. The temperature dependence of the kinetic isotope effect indicates the presence of a symmetrical cyclic transition state in the rate-determining step. Suitable mechanisms have been proposed.     

PdII‐Catalyzed Enantioselective C(sp3)−H Activation/Cross‐Coupling Reactions of Free Carboxylic Acids

Pd^II‐catalyzed enantioselective C(sp³)?H cross‐coupling of free carboxylic acids with organoborons has been realized using either mono‐protected amino acid (MPAA) ligands or mono‐protected aminoethyl amine (MPAAM) ligands. A diverse range of aryl‐ and vinyl‐boron reagents can be used as coupling partners to provide chiral carboxylic acids. This reaction provides an alternative approach to the enantioselective synthesis of cyclopropanecarboxylic acids and cyclobutanecarboxylic acids containing α‐chiral tertiary and quaternary stereocenters. The utility of this reaction was further demonstrated by converting the carboxylic acid into cyclopropyl amine without loss of optical activity.     

Reaction of benzoxazine-based phenolic resins with strong and weak carboxylic acids and phenols as catalysts

The reaction of 3,4-dihydro-3,6-dimethyl-2H-1,3-benzoxazine using strong and weak carboxylic acids and phenols as catalysts has been studied using Fourier transform infrared (FTIR) spectroscopy. The auto-accelerated curing using sebacic acid as catalyst is further documented using ¹H-nuclear magnetic resonance (NMR) and dielectric analysis. Termination of curing, using strong acids or no catalyst, are discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1913–1921, 1999