Lead tetrakis(imidazolyl)borate solids: anion exchange, solvent intercalation, and self assembly of an organic anion

The coordination polymer Pb[B(Im)(4)](NO(3))(xH(2)O), constructed by using sodium tetrakis(imidazolyl)borate and lead(II) nitrate solutions, is a layered material with the metal centers facing the interlayer spacing. As in naturally occurring layered minerals, this compound can readily undergo anion exchange and reversible intercalation of solvent water in the solid state with retention of crystallinity. We observed changes in solvent intercalation by (207)Pb solid state NMR (SSNMR) and thermogravimetric analysis (TGA). Stoichiometric exchange of (15)N nitrate for nitrate and iodide for nitrate is monitored by (15)N and (207)Pb SSNMR, and single crystals of the iodide-exchanged material Pb[B(Im)(4)]I were isolated. While the iodide compound can be obtained through facile exchange from the nitrate parent compound, the organic anion benzoate is placed in the interlayer spacing for nitrate under self-assembly conditions and forms an alternating monolayer in Pb[B(Im)(4)](C(6)H(5)COO)(0.5H(2)O). The ion exchange versus self-assembly behavior correlates with the structural differences in the three compounds. In both Pb[B(Im)(4)]I and Pb[B(Im)(4)](C(6)H(5)COO)(0.5H(2)O), the lead sites act as Lewis acids for the iodide and benzoate, respectively.     

Sequestering perrhenate with a borate-based coordination polymer: a model for pertechnetate separation

Crystals of the layered metal organic framework solid Pb[B(Im)4](NO3)(nH2O) can undergo exchange of the nitrate for perrhenate, a model for pertechnetate, forming Pb[B(Im)4](ReO4). We can monitor this reaction by 207Pb solid-state NMR and can isolate single crystals of the resultant material through growth in the presence of an excess of perrhenate. Such a synthetic metal-organic framework solid represents a new candidate for pertechnetate-sequestering materials.     

Cu2+ ions as a paramagnetic probe to study the surface chemical modification process of layered double hydroxides and hydroxide salts with nitrate and carboxylate anions

A layered zinc hydroxide nitrate (Zn5(OH)8(NO3)2.2H2O) and a layered double hydroxide (Zn/Al-NO3) were synthesized by coprecipitation and doped with different amounts of Cu2+ (0.2, 1, and 10 mol%), as paramagnetic probe. Although the literature reports that the nitrate ion is free (with D3h symmetry) between the layers of these two structures, the FTIR spectra of two zinc hydroxide nitrate samples show the C2v symmetry for the nitrate ion, whereas the g ||/A || value in the EPR spectra of Cu2+ is high. This fact suggests bonding of some nitrate ions to the layers of the zinc hydroxide nitrate. The zinc hydroxide nitrate was used as matrix in the intercalation reaction with benzoate, o-chlorobenzoate, and o-iodobenzoate ions. FTIR spectra confirm the ionic exchange reaction and the EPR spectroscopy reveals bonding of the organic ions to the inorganic layers of the zinc hydroxide nitrate, while the layered double hydroxides show only exchange reactions.     

卡托普利插层锌铝水滑石的超分子结构、热稳定性及缓释性能研究

采用共沉淀及离子交换的方法将高血压类药物卡托普利(Cpl)插入到Zn/Al-NO₃-LDHs层间，借助XRD、FTIR、UV-Vis、TG-DTA和ICP等手段对样品进行表征。结果表明，Cpl阴离子可取代层间的NO₃^-，组装得到晶体结构良好的Cpl-LDHs。XRD结果表明得到的Cpl-LDHs的层间距为1.955～2.053 nm，并与根据PM3半经验分子轨道法优化计算得到的Cpl-三维尺寸进行比较，推测客体Cpl-是沿长轴方向与层板呈一定角度双层倾斜的方式交替排布于层间，与主体层板通过氢键与静电作用形成超分子结构;该超分子结构材料与卡托普利相比，其热稳定性及缓释性能得到较大提高;缓释实验数据符合Higuchi及Korsmeyer-Peppas扩散模型，说明本实验Cpl的释放很好的符合菲克扩散机理。     

Quantifying nitrate retention processes in a riparian buffer zone using the natural abundance of 15N in NO3-

Quantifying the relative importance of denitrification and plant uptake to groundwater nitrate retention in riparian zones may lead to methods optimising the construction of riparian zones for water pollution control. The natural abundance of 15N in NO3- has been shown to be an interesting tool for providing insights into the NO3- retention processes occurring in riparian zones. In this study, 15N isotope fractionation (variation in delta15N of the residual NO3-) due to denitrification and due to plant uptake was measured in anaerobic soil slurries at different temperatures (5, 10 and 15 degrees C) and in hydroponic systems with different plant species (Lolium perenne L., Urtica dioica L. and Epilobium hirsutum L.). It was found that temperature had no significant effect on isotope fractionation during denitrification, which resulted in a 15N enrichment factor epsilonD of -22.5 +/- 0.6 per thousand. On the other hand, nitrate uptake by plants resulted in 15N isotope fractionation, but was independent of plant species, leading to a 15N enrichment factor epsilonP of -4.4 +/- 0.3 per thousand. By relating these two laboratory-defined enrichment factors to a field enrichment factor for groundwater nitrate retention during the growing season (epsilonR = -15.5 +/- 1.0 per thousand ), the contribution of denitrification and plant uptake to groundwater nitrate retention could be calculated. The relative importance of denitrification and plant uptake to groundwater nitrate retention in the riparian buffer zone was 49 and 51% during spring, 53 and 47% during summer, and 75 and 25% during autumn. During wintertime, high micropore dissolved organic carbon (DOC) concentrations and low redox potentials due to decomposition of the highly productive riparian vegetation probably resulted in a higher denitrification rate and favoured other nitrate retention processes such as nitrate immobilisation or dissimilatory nitrate reduction to ammonium (DNRA). This could have biased the 15N isotope fractionation and led to a low 15N enrichment factor for groundwater nitrate retention during wintertime (-6.2 +/- 0.9 per thousand ). In contradiction to what many other studies suggest, it is possible that due to plant decomposition during the winter period other nitrate transformation processes compete with denitrification.     

微波法合成乙二醇插层镍铝层状双金属氢氧化物

乙二醇(EG)插层层状双金属氢氧化物(LDH)可作为层间催化反应器,用于原油中环烷酸与EG的酯化脱酸反应,但其合成过程需要较长时间。 以硝酸根型镍铝LDH为前体,在KOH促进下,采用微波辅助的离子交换法合成EG插层LDH,省时节能,提高效率。 考察了微波时间、微波温度和微波功率对EG插层LDH结构的影响。 并用XRD、FT-IR和TG-DSC等比较了微波法和常规方法合成的EG插层LDH的性质。 结果表明,微波辐射能提供高能量,促进待交换阴离子向层间的扩散,并减弱层板与层间原有阴离子间的作用力,在微波温度为120 ℃,微波时间为10 min和微波功率550 W的条件下,即可得到结晶度高的EG插层LDH。 微波法合成的EG插层LDH与常规方法合成的具有相似的性质和更高的结晶度,而合成时间可由12 h大幅缩短至10 min。     

癸二酸根插层水滑石的组装及其结构表征

有机物柱撑水滑石类化合物的基础和应用研究是水滑石层柱材料研究领域中较为活跃的一个分支。近年来,化学家和材料学家较为系统、深入地研究了有机物在水滑石层板间的插层组装方法、插层驱动力、主鄄客体间的超分子作用、插层产物的结构表征、性能和应用[1],制备出了许多具有特     

Pb(3)F(5)NO(3), a cationic layered material for anion-exchange

Our research involves the development of new cationic materials for anion-based applications. We report the solvothermal synthesis and characterization of Pb(3)F(5)NO(3), a new layered lead fluoride material that, unlike the majority of layered and open-framework materials, is cationic in charge. The structure consists of polyhedral lead centers connected by doubly and triply bridging fluoride groups. We quantitatively exchanged the interlamellar nitrate groups of Pb(3)F(5)NO(3) for dichromate, under ambient aqueous conditions. Nuclear magnetic resonance and UV-vis spectroscopy show the reaction proceeds to 61.0% completion in several days. The material is also stable to 450 degrees C, which is vastly superior to organic resins that are still the standard for anion-exchange. The presence of extraframework anions also opens up other potentially unique anion-based properties, such as new catalytic reactions, anion intercalation, or growth of anionic clusters within the void spaces of the cationic material.     

交换时间对离子交换法合成谷氨酸/锌铝层状双氢氧化物的结构和热稳定性的影响

采用离子交换法实现了谷氨酸(Glu)插层到ZnAl层状双氢氧化物(ZnAl-LDH)中而形成Glu/ZnAl-LDH纳米复合材料,并用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、透射电子显微镜(TEM)以及热失重-差热(TG-DTA)分析等测试技术,研究了交换时间对Glu/ZnAl-LDH纳米复合材料结构的影响。发现当交换时间为1d时,Glu/ZnAl-LDH纳米复合材料粒子的结晶度好,Glu分子均以垂直形式插入,此时Glu在层间达到交换平衡。当交换时间为2d时,部分Glu开始以水平方式插入ZnAl-LDH纳米材料层间。但当交换时间进一步延长时,ZnAl-LDH纳米材料的结构发生部分坍塌,而且ZnAl-LDH纳米材料在微酸性的Glu溶液中发生部分溶解而使其六边形的结构出现破损。由于Glu插入ZnAl-LDH纳米复合材料层间后,其稳定性得到提高,因此,ZnAl-LDH纳米材料可以作为优良的生物分子的载体和储存器。     

Influence of acetate, chloride and nitrate ions on the sorption of cobalt by zeolite ZSM-5

Many factors affect the ion exchange process in zeolites. In this work the influence of different anions such as acetate, chloride and nitrate on the ion exchange of cobalt in zeolite ZSM-5 is discussed. After the ion exchange in the presence of those anions no change was found in the zeolite structure, by X ray diffraction and IR spectroscopy. The retention of cobalt by zeolite ZSM-5 at low concentrations (from 0.001 to 0.3N) was higher when the exchange was done with cobalt nitrate and chloride. This behavior was different in the case of 1N cobalt salts, since the highest sorption uptake was found when working with cobalt acetate and its sorption was directly proportional to its concentration.     

Formation of hydrotalcite in aqueous solutions and intercalation of ATP by anion exchange

The formation reaction and the intercalation of adenosine triphosphate (ATP) were studied for hydrotalcite (HT), a layered double hydroxide (LDH) of magnesium and aluminum. Hydrotalcite with nitrate ions in the interlayer (HT-NO(3)) was formed (A) by dropwise addition of a solution of magnesium and aluminum nitrates (pH ca. 3) to a sodium hydroxide solution (pH ca. 14) until the pH decreased from 14 to 10 and (B) by dropwise addition of the NaOH solution to the solution of magnesium and aluminum nitrates with pH increasing from 3 to 10. The precipitate obtained with method B was contaminated with aluminum hydroxide and the crystallinity of the product was low, possibly because aluminum hydroxide precipitates at pH 4 or 5 and remains even after HT-NO(3) forms at pH above 8. With method A, however, the precipitate was pure HT-NO(3) with increased crystallinity, since the solubility of aluminum hydroxide at pH above and around 10 is high as dissolved aluminate anions are stable in this high pH region, and there was no aluminum hydroxide contamination. The formed HT-NO(3) had a composition of [Mg(0.71)Al(0.29)(OH)(2)](NO(3))(0.29).0.58H(2)O. To intercalate ATP anions into the HT-NO(3), HT-NO(3) was dispersed in an ATP solution at pH 7. It was found that the interlayer nitrate ions were completely exchanged with ATP anions by ion exchange, and the interlayer distance expanded almost twice with a free space distance of 1.2 nm. The composition of HT-ATP was established as [Mg(0.68)Al(0.32)(OH)(2)](ATP)(0.080)0.88H(2)O. The increased distance could be explained with a calculated molecular configuration of the ATP as follows: An ATP molecule is bound to an interlayer surface with the triphosphate group, the adenosine group bends owing to its bond angles and projects into the interlayer to a height of 1 nm, and the adenosine groups aligned in the interlayer support the interlayer distance.     

Synthesis and characterization of mesoporous zinc layered hydroxide-isoprocarb nanocomposite

The ion exchange method was used to intercalate a poor water-soluble insecticide, isoprocarb into zinc layered hydroxide (ZLH). PXRD analysis indicated the successful intercalation with good crystallinity for the resulting nanocomposite, with a basal spacing of 33.1 Å. FTIR analyses showing the resemblance of an absorption peak of the nanocomposite with the host and the guest anion. The thermal analysis confirmed that the nanocomposite had better thermal stability compared to the pristine isoprocarb. The nanocomposite also characterized by elemental and surface morphology analysis. The surface analyses of the host and nanocomposite showed mesoporous-type material characteristics. On the whole, the intercalation process decreased the pore size of the nanocomposite compared to the pristine host, layered zinc layered hydroxide-sodium dodecyl sulphate (ZLH-SDS). The obtained material is believed has a great potential as an environmentally friendly insecticide.     

杂多酸阴离子[Co_2Bi_2W_(20)O_(70)]~(10-)柱撑水滑石光催化降解甲基橙

采用离子交换法合成了一种新型的杂多酸阴离子[Co2Bi2W20O70]10-柱撑水滑石类层状化合物,利用X射线衍射仪和傅立叶变换红外光谱仪分析了其晶相结构;研究了[Co2Bi2W20O70]10-柱撑水滑石光催化降解甲基橙的活性.结果表明,合成的[Co2Bi2W20O70]10-杂多酸阴离子柱撑水滑石较好地保持了水滑石原有的晶体形貌,具有较高的离子交换度.与此同时,杂多酸阴离子替换NO3-后,可以在一定程度上提高催化剂的催化活性.这主要归因于水滑石材料中杂多酸阴离子和水滑石层板之间的协同效应.     

Membrane Filtration of Iron(III), Copper(II) and Lead(II) Ions as 1‐(2‐Pyridylazo) 2‐Naphtol (PAN) for Their Preconcentration and Atomic Absorption Determinations

A membrane filtration procedure for the preconcentration and atomic absorption spectrometric determination of Pb(II), Co(II) and Fe(III) ions in natural water samples has been established. Cellulose nitrate membrane filters (0.45 μm and 47 mm diameter) were used in all experiments. The procedure is based on chelate formation of the analyte metals with 1‐(2‐pyridylazo) 2‐naphtol (PAN) and on retention of the chelates on cellulose nitrate membrane filter. The cellulose nitrate membrane and analyte ions were completely dissolved by 500 μL of nitric acid at 85 °C on a hood and then metal determinations were performed by flame atomic absorption spectrometry. The method was applied to natural water samples for the determination of analyte ions with satisfactory results, e.g., recoveries > 95%, RSD's < 10%.     

Divalent metal vinylphosphonate layered materials: compositional variability, structural peculiarities, dehydration behavior, and photoluminescent properties

A family of M-VP (M = Ni, Co, Cd, Mn, Zn, Fe, Cu, Pb; VP = vinylphosphonate) and M-PVP (M = Co, Cd; PVP = phenylvinylphosphonate) materials have been synthesized by hydrothermal methods and characterized by FT-IR, elemental analysis, and thermogravimetric analysis (TGA). Their structures were determined either by single crystal X-ray crystallography or from laboratory X-ray powder diffraction data. The crystal structure of some M-VP and M-PVP materials is two-dimensional (2D) layered, with the organic groups (vinyl or phenylvinyl) protruding into the interlamellar space. However, the Pb-VP and Cu-VP materials show dramatically different structural features. The porous, three-dimensional (3D) structure of Pb-VP contains the Pb center in a pentagonal pyramid. A Cu-VP variant of the common 2D layered structure shows a very peculiar structure. The structure of the material is 2D with the layers based upon three crystallographically distinct Cu atoms; an octahedrally coordinated Cu(2+) atom, a square planar Cu(2+) atom and a Cu(+) atom. The latter has an unusual co-ordination environment as it is 3-coordinated to two oxygen atoms with the third bond across the double bond of the vinyl group. Metal-coordinated water loss was studied by TGA and thermodiffractometry. The rehydration of the anhydrous phases to give the initial phase takes place rapidly for Cd-PVP but it takes several days for Co-PVP. The M-VP materials exhibit variable dehydration-rehydration behavior, with most of them losing crystallinity during the process.     

A new paradigm for anion trapping in high capacity and selectivity: crystal-to-crystal transformation of cationic materials

We describe a new methodology to the selective trapping of priority pollutants that occur inherently as oxo-anions (e.g., perchlorate, chromate, arsenate, pertechnetate, etc.) or organic anions (e.g., salicylate, pharmaceuticals, and their metabolites, which are often chlorinated into potentially more harmful compounds). The typical approach to trapping anions is exchange into cationic hosts such as resins or layered double hydroxides. Both capacity and selectivity are limited by the equilibrium of the process and moreover are often subject to interference, e.g. by carbonate that is always present in water from atmospheric CO(2). Our approach takes advantage of the metastability of our cationically charged materials to instead trap by recrystallization to a new structure. Exceptionally high adsorption capacities for permanganate and perrhenate--studied as models for pertechnetate--were found for a Ag(I)-based cationic extended framework. The exchange capacity reached 292 and 602 mg/g, respectively, over five times the exchange capacity compared to conventional layered double hydroxides. Our cationic material can also selectively trap these and other toxic oxo-anions when nontoxic anions (e.g., nitrate, carbonate) were present in an over 100-fold excess concentration.     

Reactions of nitrogen oxides with heme models. Spectral and kinetic study of nitric oxide reactions with solid and solute Fe(III)(TPP)(NO3)

The reaction(s) of nitric oxide (nitrogen monoxide) gas with sublimed layers containing the nitrato iron(III) complex Fe(III)(TPP)(eta(2)-O(2)NO) (1, TPP = meso-tetraphenyl porphyrinate(2)(-)) leads to formation of several iron porphyrin species that are ligated by various nitrogen oxides. The eventual products of these low-temperature solid-state reactions are the nitrosyl complex Fe(TPP)(NO), the nitro-nitrosyl complex Fe(TPP)(NO(2))(NO), and 1 itself, and the relative final quantities of these were functions of the NO partial pressure. It is particularly notable that isotope labeling experiments show that the nitrato product is not simply unreacted 1 but is the result of a series of transformations taking place in the layered material. Thus, the nitrato complex formed from solid Fe(TPP)(eta(2)-O(2)NO) maintained under a (15)NO atmosphere was found to be the labeled analogue Fe(TPP)(eta(2)-O(2)(15)NO). The reactivities of the layered solids are compared to the behaviors of the same species in ambient temperature solutions. To interpret the reactions of the labeled nitrogen oxides, the potential exchange reactions between N(2)O(3) and (15)NO were examined, and complete isotope scrambling was observed between these species under the reaction conditions (T = 140 K). Overall it was concluded from isotope labeling experiments that the sequence of reactions is initiated by reaction of 1 with NO to give the nitrato nitrosyl complex Fe(TPP)(eta(1)-ONO(2))(NO) (2) as an intermediate. This is followed by a reaction in the presence of excess NO that is equivalent to the loss of the nitrate radical NO(3)(*)( )()to give Fe(TPP)(NO) as another transient species. A plausible pathway involving NO attack on the coordinated nitrate of 2 resulting in the release of N(2)O(4) concerted with electron transfer to the metal center is proposed.     

Radiochemical separation of lead by amalgam exchange

An amalgam exchange technique has been used for the rapid radiochemical separation of lead. A number of variables which affect the exchange were studied and a lead yield of 88.5 %was obtained. At room temperature the procedure requires about 13 min, whereas at 40 degrees it can be completed in about 9 min. Radioactive tracers of 16 different elements were used to check the selectivity of this procedure, which has also been applied for the separation of (212)Pb from thorium nitrate solution.     

Anion exchange reaction potentials as approximate estimates of the relative thermodynamic stabilities of Mg/Al layered double hydroxides containing different anions

Coatings of hydrotalcite-like nitrate-intercalated Mg/Al layered double hydroxides are electrochemically deposited on a Pt electrode by electrogeneration of base by reduction of a mixed metal nitrate aqueous solution. As-prepared coatings are stable to workup and function as rugged electrodes. The voltammetric response generated by anion exchange of intercalated nitrate for dissolved anions from solution under equilibrium conditions is employed to estimate the thermodynamic stabilities of the Mg/Al layered double hydroxides comprising different anions relative to the nitrate-containing phase. Among monovalent anions, the most stable is the fluoride-containing LDH (ΔG° = -48.7 kJ mol(-1)) relative to the nitrate-containing LDH. The stability in aqueous phase decreases as F(-) > Cl(-) > Br(-) > NO(2)(-) > NO(3)(-), whereas, among divalent anions, SO(4)(2-) (ΔG° = -8.7 kJ mol(-1)) > CO(3)(2-) (ΔG° = 14.3 kJ mol(-1)). The results of monovalent ions match well with the Miyata series, whereas the divalent anion series is at variance with the commonly held belief that carbonate-LDHs are more stable than sulfate-LDHs.     

诺氟沙星插层镁铝水滑石新型药物-无机复合材料的超分子结构、热稳定性和缓释性能

采用共沉淀和离子交换方法将抗生素类药物诺氟沙星(Nor)插入到Mg-Al-LDHs层间, 制备了一种新型的药物-无机复合材料. 借助XRD, FTIR, UV-Vis, TG-DTA和ICP等手段对样品进行了表征. 结果表明, Nor-阴离子可取代层间的NO3-, 组装得到晶体结构良好的Nor-LDHs. XRD表征得到Nor-LDHs的层间距为1.29~1.33 nm, 并与根据PM3半经验分子轨道法优化计算得到的Nor-三维尺寸进行比较, 推测客体Nor-是沿短轴方向以单层垂直交替的方式排布于层间, 与主体层板通过氢键与静电作用形成超分子结构; 该超分子结构诺氟沙星-水滑石复合材料与诺氟沙星相比, 其热稳定性、耐酸性及缓释性能均有大幅度提高, 缓释实验数据符合Bhaskar方程和一级动力学方程模型.