两性淀粉接枝共聚物在中性抄纸中的应用

为考察两性淀粉与丙烯酰胺接枝共聚及阳离子合成的具有功能化、网络化的多元变性淀粉对纸张的增强效果,采用废纸浆为原料,在中性抄纸条件下,对该多元变性淀粉的增强应用性能进行了研究。结果发现,两性淀粉与丙烯酰胺接枝共聚物(AS-g-PAM)及其阳离子化的衍生物(AS-g-CPAM)比两性淀粉具有更好的增强效果,尤其可大幅度提高纸张的环压强度。与两性淀粉比较,用量为0.5%AS-g-PAM和AS-g-CPAM可分别提高环压指数22%和45%以上,对纸张的抗张指数、耐破度等也比使用两性淀粉有不同程度的提高,同时,AS-g-CPAM在0.05%的低用量时,仍具有较好的增强效果。     

淀粉制备高吸水性材料

以木薯淀粉为原料,经常温碱糊化,在酸性介质中用KMnO_4为引发剂,进行丙烯腈与淀粉的接枝共聚。结果表明:单体转化率高,接枝效率达95％,支链分子量达30万。接枝共聚物在碱溶液中水解,水解产物的吸水能力超过自重的2000倍。此法通过了中试。     

淀粉与丙烯酰胺的接枝共聚

本文以木薯淀粉为骨架,以丙烯酰胺为单体,进行淀粉—丙烯酰胺接枝共聚的研究。对接枝共聚过程中引发剂浓度、单体浓度、反应温度、反应时间、介质酸浓度及淀粉糊化温度等因素的影响进行了讨论,寻找接枝共聚的最佳反应条件。     

淀粉糊化对淀粉—丙烯酰胺接枝共聚的影响

本文比较了糊化前后的淀粉结构形态及它和丙烯酰胺接枝共聚的反应速率、接枝率、支链分子量的变化及接枝物结构形态的差异。淀粉糊化后,团粒结构解体、润胀和水合成较均匀的糊状胶体,和丙烯酰胺接枝共聚反应活性点多,初期反应速率较大,接枝率高,支链分子量较低。来糊化淀粉和丙烯酰胺接枝聚合仅发生在淀粉团粒表面,所以初期反应速度低,接枝率低。但从后期聚合速率上升和凝胶加速出现说明淀粉表面对丙烯酰胺聚合有很好的促进作用。     

Mn^3＋引发淀粉与丙烯腈接枝共聚物的研究

用过渡金属离子或其配合物引发淀粉的接枝共聚是一个饶有兴趣的课题。Ce~(4 )离子引发淀粉与烯类单体的接枝共聚已有广泛报道。Mehrotra等用稳定的[Mn(H_2P_2O_7)_3]~(3-)引发淀粉与烯类单体的接枝共聚取得了满意的结果。本文报道用电镜,x-射线衍射和热重分析等方法对这一接枝共聚物的形态、结构和热稳定性的研究结果。     

阳离子淀粉-壳聚糖-丙烯酰胺的接枝共聚研究

以硝酸铈铵为引发剂,合成阳离子淀粉(CS)-壳聚糖(CTS)-丙烯酰胺(AM)接枝共聚物,讨论了反应温度、引发剂浓度、单体用量、反应时间以及壳聚糖用量对接枝共聚反应的影响。结果表明:淀粉中葡萄糖环浓度(cAGU)为0.20 mol/L,mCTS/mCS=1/6,cAM=1.0mol/L,cCe4 =5 mmol/L,反应温度60℃,反应时间3 h时,转化率和接枝效率可分别达到88%和92%以上;转化率随mCTS/mCS增大而增大,接枝效率则随着CTS用量增大降低,CTS的存在使AM均聚的几率增大。     

淀粉-烯类单体接枝共聚物的研究方法

介绍了常见淀粉–烯类单体接枝共聚产物各成分的分离及其表征方法。从淀粉接枝物的分离和表征方面,介绍了分离淀粉接枝共聚物各成分过程中所采用的方法,及表征接枝共聚产物的各种方法,并对所采用的方法进行简要地评述。     

丙烯酰胺与二(烯丙基)十二胺在羧甲基纤维素上的接枝共聚物合成与表征

以十二胺与 3 氯丙烯的反应物二 (烯丙基 )十二胺 (DALA)、丙烯酰胺 (AM)和羧甲基纤维素 (CMC)为原料 ,合成了疏水化水溶性两性纤维素接枝共聚物 (CGAL) .利用FTIR、1 H NMR、MS和元素分析 (EA)等方法确证了DALA的结构 .考察了CMC的取代度与浓度 ,AM、DALA与引发剂浓度 ,温度及pH等因素对接枝共聚的影响 .通过FTIR对CGAL进行了分析 .借助比色滴定、EA和GPC等手段测定了CGAL的组成与分子量 .TG分析和粘度法研究了CGAL及其溶液的热稳定性 .纤维素酶降解试验说明CGAL具有生物降解性     

有机阳离子高分子絮凝剂

近年来,有机阳离子高分子絮凝剂得到国内外学者的广泛重视.它的研究、开发、应用都取得了显著进展.本文对此进行评述和介绍,内容涉及阳离子型聚丙烯酰胺接枝共聚物、羟基醚化类、二烷基二烯丙基卤化铵类和环氧氯丙烷与胺反应物,特别是近年来淀粉等天然高分子改性阳离子型絮凝剂和人工合成的无毒有机阳离子高分子絮凝剂.     

淀粉-丙烯酸钠接枝共聚物的固体高分辨核磁共振研究

运用固体高分辨核磁共振技术,通过测量13C魔角旋转/交叉极化(CP/MAS)谱、1H自旋-晶格弛豫时间T1及旋转坐标系中的自旋-晶格弛豫时间T1ρ,对一系列淀粉-丙烯酸钠接枝共聚物的相结构进行了研究,并与淀粉、均聚丙烯酸钠及两者共混物的实验结果进行了比较.结果表明,接枝共聚导致了淀粉结晶度的明显降低;在共混物和接枝共聚物中,淀粉和聚丙烯酸钠组分都具有纳米尺度的相容性,由于接枝的效应,接枝共聚物中两个组分表现出比共混物更高的相容水平.     

Synthesis of carboxymethyl potato starch and comparison of optimal reaction conditions from different sources

Carboxymethyl potato starch (CMPS) was synthesized under heterogeneous reaction conditions. The influences of etherification temperature, alkalization and etherification time, sodium hydroxide to monochloroacetic acid (MCA) molar ratio (n_NaOH/n_MCA), theoretical degree of substitution (DS_t), the ratio of isopropyl alcohol (IPA) volume to starch mass (v_IPA/m_st) on degree of substitution (DS) and reaction efficiency (RE) of CMPS were investigated. Compared with the previous literature data, the results had significant difference for the optimal carboxymethylation conditions of potato starch from different sources. CMPS prepared under optimal conditions showed the highest DS and RE, which were 1.36 and 0.88, respectively. Furthermore, the RE value in this work is considerably higher than that reported in the literature. The time of alkalization and etherification were also discussed independently. In addition, CMPS was characterized by Fourier transform infrared spectrophotometry and scanning electron microscopy (SEM). Copyright © 2008 John Wiley & Sons, Ltd.     

疏水缔合和静电作用调控P(DTAB-co-AM)与蠕虫状胶束自组装网络

由新型的阳离子疏水单体二甲基十四烷基(3-丙烯酰胺基丙基)溴化铵(DTAB)与丙烯酰胺(AM)共聚合成了阳离子型疏水缔合共聚物P(DTAB-co-AM),研究了该共聚物与蠕虫状胶束自组装后的协同增黏效应,及改变疏水单体含量对自组装体系黏度的调控作用.制备了十八烷基三甲基氯化铵(CTAC)/水杨酸钠和芥酸钾/三羟乙基苄基氯化铵两类稳定的黏度较大的蠕虫状胶束体系.共聚物P(DTAB-co-AM)与芥酸钾/三羟乙基苄基氯化铵蠕虫状胶束在疏水缔合和静电吸引双重作用下自组装可形成协同增黏的缔合体系,而与CTAC/水杨酸钠阳离子蠕虫状胶束进行自组装由于只有疏水缔合作用,增黏效果不及前者.表观黏度研究表明,随着疏水单体含量的增加,P(DTAB-co-AM)与芥酸钾/三羟乙基苄基氯化铵缔合体系的黏度先增加后降低,当疏水单体含量为0.15 mol%时,缔合体系黏度达到极大值;当疏水单体含量为0.3 mol%时,缔合体系黏度反而低于与阳离子蠕虫状胶束缔合后的黏度.对于共聚物与CTAC/水杨酸钠蠕虫状胶束缔合体系,随着疏水单体含量增加,由于疏水缔合作用与静电排斥作用的相互抵消,致使体系黏度有所下降.由此说明改变疏水单体含量可以达到调控自组装体系黏度的目的.     

Graft copolymerization of acrylamide onto carboxymethyl starch

Water absorption resins of carboxymethyl starch graft acrylamide (CMS-g-AM) were synthesized by copolymerization based on a free radical reaction. At first, CMS was prepared with starch and chloroacetic acid in an alkali-methanol media. Then, AM was grafted onto CMS by using ceric ammonium nitrate as an initiator. The resulting graft products were identified by infrared spectra. The effects of the preparation conditions on the substituent degree (SD) of starch and the water absorption capacities of CMS-g-AM were investigated. The results showed that SD of starch first increased remarkably and then decreased gradually with increased addition of sodium hydroxide, and the water absorption capacity of CMS-g-AM depended greatly on the SD of CMS and its maximum with 0.75 of SD of starch was 350 g/g.     

脂肪醇聚氧乙烯醚催化干法制备阳离子淀粉

阳离子淀粉是淀粉与阳离子试剂反应制得的一类很重要的淀粉衍生物。已广泛用于造纸、纺织、食品、油田、粘合剂、化妆品和污水处理等行业 [1 ,2 ]。阳离子淀粉传统的制备方法是溶液法 ,因反应时间长、溶剂消耗量大、产品成本高、对环境污染严重等 ,从而使产品的开发和应用受到限制。自 Caesar等 [3,4 ]发现干法制备阳离子淀粉的方法以来 ,受到了变性淀粉研究工作者的重视。在用 Na OH作催化剂 ,干法制备季铵型阳离子淀粉方面 ,国内也做了许多研究工作 ,取得了许多研究成果 [5～ 7]。岳世泰等 [8]也报道了用电磁干法制备阳离子淀粉的研究成…     

The effect of pretreatment of calcite dispersions with anionic sodium polyacrylate on their flocculation behavior induced by cationic starch

The flocculation performance of cationic starches on calcite pretreated with anionic sodium polyacrylate (NaPA) was investigated by measuring the mean particle size and the dynamic mobility of the calcite dispersions. Cationic starches of different molecular weight and degree of substitution were used. By varying the amount of anionic sodium polyacrylate, which has a strong affinity to the calcium carbonate surface, one is able to anionically modify the particles and reverse the charge character of the originally cationic calcium carbonate. By such modification of the charge character of the calcium carbonate dispersion, it is possible to approach the mechanisms of flocculation caused by cationic macromolecules like starch. The importance of different mechanisms of flocculation, such as bridging, charge neutralization, and flocculation induced by polyelectrolyte complexes (PEC), was further investigated in this work. It was found that when the NaPA is completely absorbed at the calcite surfaces the mechanism of the flocculation induced by the starch is mainly bridging flocculation. Excess NaPA in the calcium carbonate dispersion will result in polyelectrolyte complexes formed between the non-absorbed NaPA and the oppositely charged starch polymers. These complexes will in most cases strongly enhance the flocculation due to mainly charge neutralization. Depending on the ratio of non-absorbed NaPA and the starch in the aqueous phase, the calcite dispersion is either re-stabilized or more strongly flocculated due to the formed polyelectrolyte complexes. Both the mobility and the particle size measurements support the mechanisms described. It was further demonstrated that the molecular weight and degree of substitution of the starches might be adjusted to control the flocculation behavior.     

Synthesis and properties of starch‐graft‐polyacrylamide/clay superabsorbent composite

A novel starch‐graft‐polyacrylamide/clay superabsorbent composite is synthesized by graft copolymerization reaction of acrylamide, potato starch and clay mineral micropowder, followed by hydrolysis with sodium hydroxide. The water absorbency of the composite reaches 4 000 g H₂O/g. The influence of kind and amounts of clay and of the crosslinker in the composite on the absorbent properties is discussed in this paper.     

超大孔P(AA-co-AM)/PVA水凝胶的制备及吸附性能研究

采用泡沫分散聚合法,以饱和Na2CO3水溶液为发泡剂,过硫酸铵(APS)及NaHSO3为引发剂,N,N′-亚甲基双丙烯酰胺(MBA)为交联剂,聚(氧化乙烯/氧化丙烯)(PF127)为泡沫稳定剂,丙烯酸(AA)和丙烯酰胺(AM)为单体,聚乙烯醇(PVA)为第二网络,制备超大孔半互穿水凝胶P(AA-co-AM)/PVA,并研究其对阳离子兰染料的吸附性能。研究表明,P(AA-co-AM)/PVA具有相互贯穿的超大孔结构;当n(AM):n(AA)=1.5:1,w(PVA)=1.6%时凝胶的平衡溶胀度达186.56g/g;凝胶具有很好的离子响应性,在蒸馏水中的平衡溶胀度为129.16g/g时,在0.1mol/L NaCl溶液中只有31.07g/g;对阳离子兰染料溶液的脱色率达92.17%,吸附容量达17.16mg/g。     

PREPARATION AND SWELLING PROPERTIES OF SUPER-ABSORBENT POLYMER

A super-absorbent polymer is prepared by graft polymerizing acrylamide (AM) ontopotato starch using ceric ammonium nitrate (CAN) and N, N′-methylene-bis-acrylamide(bisAM) as an initiator and cross-linking agent respectively, and then subjecting the potatostarch-poly(acrylamide) (PAM) graft copolymer (SPAM ) to alkaline saponification. Thewater absorbency (WA) of the sample is nearly 5000 g H_2O/g for dry sample in 24 hat room temperature and is far larger than that of reported in the literature. Thevariables affecting the WA were investigated and optimized, they were: concentrations ofpotato starch, AM, CAN and bisAM were 26.3 g/L, 1.14 mol/L, 10.3 mmol/L and 0.53mmol/L, respectively. The amount of sodium hydroxide was 15 g and the temperatures ofgraft copolymerization and saponification reactions were 60℃ and 95℃. The time of graftcopolymerization and saponification reactions was 2 h, respectively.