Frist-principles Band Structures Calculation of Tin-phthalocyanine

We adopt the density function theory with generalized approximation by the Beeke exchange plus Lee-Yang-Parr correlation functional to calculate the electronic first-principles band structure of tin-phthalocyanine （SnPc）. The intermolecular interaction related to transport behavior was analyzed from the F-point wave function as well as from the bandwidths and band gaps. From the calculated bandwidths of the frontier bands as well as the effective masses of the electron and hole, it can be concluded that the mobility of the electron is about two times larger than that of the hole. Furthermore, when several bands near the Fermi surface are taken into account, we find that the interband gaps within the unoccupied bands are generally smaller than those of the occupied bands, indicating that the electron can hop from one band to another which is much easier than the hole. This may happen through electron-phonon coupling for instance, thus effectively yielding an even larger mobility for the electron than for the hole. These facts indicate that in SnPc the electrons are the dominant carriers in transport, in contrast to most organic materials.     

杂硼原子簇XB6+ (X=C,Si, Ge,Sn, Pb)的稳定性和芳香性

利用从头算MP2方法和密度泛函理论B3LYP和B3PW91方法, 研究了杂硼原子簇XB₆⁺ (X=C, Si, Ge, Sn, Pb)的结构、稳定性及化学键合情况. 对C, Si, Ge, B使用6-311+G(d)基组, 对Sn和Pb使用LANL2DZ赝势基组. 研究结果表明, 具有C_s对称性的假平面XB₆⁺ (X=C, Si, Ge, Sn, Pb)结构是势能面上的全域极小点, 其稳定性要高于C_6v对称性的锥形结构和C₂对称性的假锥形结构. 在B3LYP水平上, 对这些异构体的势能面的极小点进行了自然键轨道(NBO)的分析; 对最稳定构型的最高占据分子轨道(HOMO)和最低空轨道(LUMO)能级差、分子轨道(MO)和核独立化学位移(NICS)进行了计算和讨论. 分析了杂原子和硼原子间、相邻硼原子间的键合情况, 讨论了最稳定构型的芳香性质.     

Thermochemistry of the higher chlorine oxides ClOx (x=3, 4) and Cl2Ox (x=3–7)†

Heats of formation for ClO₃, ClO₄, Cl₂O₃, Cl₂O₄, Cl₂O₅, Cl₂O₆ and Cl₂O₇ molecules are determined at the B3LYP, B3PW91, mPW1PW91 and B1LYP levels of the density functional theory employing a series of extended basis sets, and using Gaussian-3 model chemistries. Modified Gaussian-3 calculations, which employ accurate B3LYP/6-311+G(3d2f) molecular geometries and vibrational frequencies, were also performed. Heats of formation were calculated from both total atomization energies and isodesmic reaction schemes. The latter method in conjunction with Gaussian-3 models leads to the most reliable results. The best values at 298 K for ClO₃, ClO₄, Cl₂O₃ and Cl₂O₄ as derived from an average of G3//B3LYP and G3//B3LYP/6-311+G(3d2f) calculations are 43.1, 54.8, 31.7 and 37.4 kcal mol⁻¹. From calculations carried out at the G3(MP2)//B3LYP and G3(MP2)//B3LYP/6-311+G(3d2f) levels, heats of formation for Cl₂O₅, Cl₂O₆ and Cl₂O₇ are predicted to be 53.2, 52.2 and 61.5 kcal mol⁻¹. All best values are reproduced within 1 kcal mol⁻¹ by using mPW1PW91/6-311+G(3d2f) isodesmic energies. Enthalpy changes for relevant Cl–O bond fission reactions are reported. Comparisons with previous thermodynamics data are made.     

The evaluation of bond dissociation energies for simple sulphur containing molecules using ab initio and density functional methods

The S–H and C–S bond dissociation energies for simple alkylthiols and dialkylsulphides, along with the S–S bond dissociation energy for dimethyl disulphide, compounds which have been used in the metal–organic chemical vapour deposition (MOCVD) growth of wide band gap II–VI (12–16) Zn- and Cd-based compound semiconductors, have been computed using the ab initio (ROHF and MP2) and density functional theory (DFT) methods (BHandH, BHandHLYP, B3LYP, B3P86, B3PW91, BLYP and BP86) with the 6-311+G(2d,p) basis set along with high accuracy complete basis set, CBS-4 and CBS-Q energy computations. The computed energies are compared with experimental results and the suitability of the DFT methods, for the computational study of these systems, is discussed.     

Conformation of N,N′-bis (2,6-dimethylmorpholino), N″-dichloroacetyl phosphoric triamide: CHCl2C(O)NHP(O)[2,6(CH3)2(NC4H6O)]2. NMR and ab initio studies

Using phosphorus pentachloride as a substrate, a new carbacyclamidophosphate, N,N″-bis (2,6-dimethylmorpholino), N″-dichloroacetyl phosphoric triamide (1) has been synthesized and characterized by ¹H, ³¹P and ¹³C NMR, IR spectroscopy and elemental analysis. Due to the presence of methyl disubstituted morpholine rings and the dichloroacetamide group, several conformers can be considered for this molecule. The ³¹P{¹H} NMR spectra for the isomeric mixture of synthesized compound showed four signals with the ratio 67.1; 19.0; 12.2; 1.7, which indicates four independent conformers. The ¹H NMR spectra confirmed these results. The conformational space and the molecular geometry of the molecule in the gaseous phase have been studied using the B3LYP method of approximation, with 6-31G and 6-311++G^** basis sets.     

9-氨基奎宁催化剂催化1-溴代硝基甲烷和亚苄基丙酮的共轭加成反应的理论研究

通过密度泛函理论(DFT) B3LYP, M062X和从头算方法MP2, 给出了9-氨基奎宁作为有机催化剂和苯甲酸作为辅助催化剂催化1-溴代硝基甲烷与亚苄基丙酮的不对称共轭加成反应的详细反应机理. 反应过程主要包括3个阶段: (1) 亚胺离子中间体的形成; (2) 亚胺离子与1-溴代硝基甲烷的亲核加成; (3) 水解并伴随催化剂的还原. 计算结果不仅解释了苯甲酸加合物在亚胺离子形成过程中所起的重要作用, 而且提供了一般反应模型以理解这个共轭加成反应的反应机理和对映选择性.     

Synthesis and Photophysical Properties of 3,6-Diphenyl-9-hexyl-9<Emphasis Type="Italic">H</Emphasis>-carbazole Derivatives Bearing Electron Withdrawing Groups

Summary. 3,6-Diphenyl-9-hexyl-9H-carbazole derivatives bearing electron withdrawing groups, such as the formyl or the nitro-group in 4-positions of the phenyl substituents, were prepared and characterized. Their photophysical properties were evaluated and compared with those of the unsubstituted counterpart 3,6-diphenyl-9-hexyl-9H-carbazole. The electron withdrawing groups bearing compounds exhibited considerable red shifts of the absorption and the emission maxima. While 3,6-di(4-nitrophenyl)-9-hexyl-9H-carbazole emitted in the orange region of the visible spectrum with its emission maximum peaking at 585 nm, 3,6-di(4-formylphenyl)-9-hexyl-9H-carbazole gave a pure blue emission with a luminescence quantum yield of 95% peaking at 450 nm. Observed features were explained using quantum mechanical calculations and organic light emitting diodes using the formylphenyl substituted compound as emissive layer were built demonstrating the practical applicability of this class of compounds.     

膦配体对金团簇[Au@Au8(PR3)8]3+(R=Me,OMe,H,F,Cl,CN)稳定化作用的理论研究

采用ab initio HF, MP2方法和密度泛函理论方法, 对具有D2h和D4d构型的膦配体稳定的过渡金属团簇[Au@Au8(PR3)8]3+(R=Me, OMe, H, F, Cl, CN)进行了几何结构、 电子结构及团簇稳定性等方面的研究. 计算表明, 与D2h构型相比, D4d构型更稳定, 两者能量相差约5~10 kJ/mol. SVWN局域泛函能够对团簇的几何结构给予较准确的描述, MP2方法对团簇的结构参数有所低估, 而离域和杂化泛函则过高地估计了团簇的结构参数. 电子结构分析表明, 中心Au原子与外围的Au原子之间通过 d 电子的成键作用构成团簇内核[Au@Au8]3+, [Au@Au8]3+与PR3配体则通过"σ给予/π反馈"模式成键. PR3配体与[Au@Au8]3+的结合能够加强内核-外围Au原子间的成键作用, 缩小外围Au原子在成键上的差异, 增大前线轨道能级间隙, 从而提高团簇的稳定性. PR3配体中R基团供、 吸电子能力的变化对[Au@Au8(PR3)8]3+结构影响较小, 但对[Au@Au8]3+-PR3结合能影响较大. 能量分析显示, 不同PR3配体与[Au@Au8]3+之间具有相近的轨道作用能, 与R基团供、 吸电子能力相关的非轨道作用能成为影响两者连接牢固程度的决定因素.     

Theoretical molecular structures for partially bonded complexes of trimethylamine with SO2 and SO3: ab initio and density functional theory calculations

The self-consistent reaction field (SCRF) method based on Onsager's reaction field theory is applied to investigate the effect of polar media on molecular structures of complexes of trimethylamime (TMA) with SO_x (x=2,3). The calculated SCRF N–S bond lengths at the MPW1PW91/6-311+G(3df) level are in satisfactory agreement with the experimental N–S bond lengths for the TMA–SO_x upon crystallization. The results are enough to demonstrate the usefulness of the reaction field theory in providing qualitative understanding of the medium effect on the partially bonded system such as TMA–SO_x.     

The specific behavior of MxTiS2 (x=1/4, M=Fe, Ni) surfaces probed by scanning microscopy (STM and AFM)

The scanning tunneling microscopy (STM) and atomic force microscopy (AFM) images of two model systems M_1/4TiS₂ (M=Fe, Ni) were interpreted on the basis of the partial electron density ρ(r,E_F) and total electron density ρ(r) of a slab which consists of seven (0 0 1) M_1/4TiS₂ atomic layers. The geometrical structure of the slabs investigated was optimized. Electronic structure calculations were performed using the ab initio periodic LCAO-DFT method. The top sulfur plane (0 0 1) imaged gives a different answer depending both of the compounds considered and the scanning probe microscopic instrument used. Theoretical calculations have then been carried out in order to improve our knowledge of the surface electronic structure of these inserted compounds and attempts are made to rationalize the experimental data. A specific behavior of the surface electronic structure in comparison with the 3D compounds (depending on the guest specie inserted) is shown.     

Rapid Estimation of Basis Set Error and Correlation Energy Based on Mulliken Charges and Mulliken Matrix with the Small 6-31g* Basis Set

Good, density functional quality (B3LYP/6-31G*) ground state total electronic energies have been approximated using single point Hartree–Fock-self consistent field (HF-SCF/6-31G*) total energies and Mulliken partial charges versus. Mulliken matrix (electrons assigned to atoms and atoms pairs from Mulliken population analysis). This is a development of our rapid estimation of basis set error and correlation energy from partial charges (REBECEP) method, published earlier (see references [21,22,30]. The development is as follows: (1) A larger set of atoms (H, C, N, O, F, Si, P and S) are considered as building blocks for closed shell, neutral, ground state molecules at their equlibrium geometry; (2) geometries near equilibrium geometry are also considered; (3) A larger set, containing 115 molecules, was used to fit REBECEP parameters; (4) most importantly, electrons belonging to chemical bonds (between atom pairs) are also considered (Mulliken matrix) in addition to the atoms (Mulliken charges), using more REBECEP parameters to fit and yielding a more flexible algorithm. With these parameters a rather accurate closed shell ground state electronic total energy can be obtained from a small basis set HF-SCF calculation in the vicinity of optimal geometry. The 3.3 kcal/mol root mean square deviation of REBECEP improves to 1.5 kcal/mol when using Mulliken matrix instead of Mulliken charges.     

Theoretical and experimental study of the structure and vibration spectra of 4,4′-carbonyl-di-morpholine

4,4′-Carbonyl-di-morpholine was synthesized and characterized by X-ray diffraction, the FTIR and NMR spectra. The extended MO calculations using density functional theory (DFT) and self-consistent field molecular orbital Hartree-Fock theory were carried out. The results of the calculations were compared with experimental data. The experimental and calculated results were supported each other. The performance of a hybrid B3LYP density functional was compared with the ab initio restricted Hartree-Fock method. With the basis sets of the 6-311G** quality, the DFT calculated bond lengths, dipole moments and harmonic vibrations were predicted in a very good agreement with available experimental data.     

烷烃客体分子(CnHm, n≤6, m≤14)在51262和51264水笼中的稳定性与拉曼光谱的密度泛函理论计算

可燃冰矿藏中气体成分非常复杂,通过谱学分析对水合物样品成分进行指认具有重要意义.基于B97-D/6-311++G（2d,2p）的密度泛函理论（DFT）计算,我们系统地探索了构成水合物的两种标准水笼（5¹²6²和5¹²6⁴）包络十八种不同烷烃客体分子的稳定性. 从计算结果可以看出,除了3-甲基戊烷和2,3-二甲基丁烷两个烷烃客体分子,其它16个烷烃客体分子都可以被容纳在5¹²6²笼中;但是与5¹²6²笼不同,十八种烷烃客体分子都可以被容纳在尺寸较大的5¹²6⁴笼中. 同时,我们也模拟了五种直链烷烃和四种环状烷烃在5¹²6²和5¹²6⁴笼中相应的谱学特征,从拉曼谱图上可以看出,随着碳原子数量的增多,直链烷烃客体分子C―H键伸缩振动区的多数拉曼谱带向高波数移动,而环状烷烃客体分子C―H键伸缩振动区的拉曼谱带则向低波数移动. 这些结果为实验上通过拉曼谱测量指认水合物矿藏的成分提供理论参考.     

Fabrication of Zn-Ti layered double hydroxide by varying cationic ratio of Ti4+ and its application as UV absorbent

ZnTi-layered double hydroxides(LDHs) with varying Zn/Ti ratio have been synthesized by coprecipitation of zinc and titanium salts from homogeneous solution.The obtained ZnTi-LDHs possess high crystallinity and hierarchical structure with improved UV-absorbance property.The UV-vis spectra show that the UV absorbing properties of ZnTi-LDHs is stronger and broader than both MgAl-LDH and ZnAl-LDH due to the existence of Ti.Moreover,the UV absorption property increased with the content of Ti,which can be ascribed to the decrease in the band gap energy,as clearly confirmed by density functional theory calculations.When irradiated by UV rays,the property of the samples with generated free radicals(OH~·and O_2~·) was evaluated by means of electron spin resonance(EPR).ZnTi-LDHs generated a relatively lower active radicals in contrast with TiO_2 and ZnO,which implied an increased safety used as sunscreens.Therefore,this work provides a detailed understanding of UV shielding properties of ZnTiLDHs which was unrevealed previously,and demonstrates the expansive application prospects of ZnTiLDHs in the field of sunscreens.     

Theoretical Study on Electronic Gain-and-loss Properties of TEMPO and Its Derivates in Charge/Discharge Processes

Theoretical study on the electronic structures and related properties of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) and its cationic lipid derivates in the charge/discharge processes has been carried out using the density functional theory (DFT) at the (U)B3LYP/6-31G(d,p) or 6-31+G(d,p) level. The changes and regularities of geometric and electronic properties of these compounds in the charge/discharge processes were revealed in detail. The compu-tational results show that the substitute group plays a very important role in the electronic structures and related properties of TEMPOs during the charge/discharge processes. It isvery interesting to find that after getting an electron, TEMPO is more stable in singlet state but the lipid is more stable in triplet state. For TEMPO, both the charge and the discharge processes greatly influence the electronic properties of N and O atoms of the radical part. For the cationic lipid, the discharge process mainly influences the pyridinium head and the charge process mainly influences the free radical head. Moreover, the solvent effect plays an important role in some bond lengths and the charge population of the free radical head. In addition, the UV-Vis absorption spectra of TEMPO and the lipid were calculated and simulated using TDDFT at the 6-31G(d,p) or 6-31+G(d,p) level, in satisfying agreement with the experimental ones.     

Structures and stability of N7+ and N7− clusters

Ab initio molecular orbital theory and density functional theory have been used to study nine isomers of N₇ ionic clusters with low spin at the HF/6-31G*, MP2/6-31G*, B3LYP/6-31G*, and B3LYP/6-311(+)G* levels of theory. All stationary points are examined with harmonic vibrational frequency analyses. Four N₇ ⁺ isomers and five N₇ ⁻ isomers are determined to be local minima or very close to the minima on their potential-energy hypersurfaces, respectively. For N₇ ⁺ and N₇ ⁻, the energetically low lying isomers are open-chain structures (C _{2 v} and C _{2 v} or C₂). The results are very similar to those of other known odd-number nitrogen ions, such as N₅ ⁺, N₉ ⁺, and N₉ ⁻, for which the open-chain structures are also the global minima. This research suggests that the N₇ ionic clusters are likely to be stable and to be potential high-energy-density materials if they could be synthesized. Received: 16 July 2001 / Accepted: 8 October 2001 / Published online: 21 January 2002     

稀土金属掺杂对锐钛矿型TiO2光催化活性影响的理论和实验研究

从理论和实验两方面探讨稀土金属掺杂对锐钛矿型TiO2光催化活性的影响.理论上采用基于密度泛函理论(DFT)的第一性原理,对稀土掺杂TiO2前后的几何结构、能带结构、态密度及电子结构进行了系统的研究.结果表明,Y,La,Gd,Lu,Ce,Eu,Yb和Tb掺杂有助于TiO2光催化活性的提高;而对于Pr,Nd,Pm,Sm,Dy,Ho,Er和Tm掺杂,由于在价带顶和导带底之间形成了较多的可能成为光生电子和空穴的复合中心的杂质能级,故此类稀土的掺杂浓度需要控制在较小的范围内.另一方面,采用溶胶-凝胶法制备了9种稀土金属(RE=Y,Ce,Pr,Sm,Gd,Dy,Ho,Er,Yb)掺杂的TiO2粉体,运用X射线衍射(XRD)和紫外-可见光谱法(UV-Vis)分别表征其晶体结构和光学吸收性质.结果表明,掺杂前后的TiO2均为锐钛矿相,且Ho,Pr,Ce,Sm,Y,Yb和Gd掺杂使TiO2在可见光区的吸收有不同程度的提高.理论预测与实验结果基本一致,且理论研究结果与周期表中稀土元素外层电子轨道排布规律一致,从而揭示了稀土元素掺杂的本质规律,指明了适量的稀土掺杂有利于TiO2光催化活性的提高.