Comparison of Adsorption Isotherms of Methylxanthines on C18 Column

A comparison of the adsorption isotherms of caffeine, theophylline and theobromine and the competitive adsorption of the three compounds on a C 18 column were investigated. The experimental parameters of the equilibrium isotherms were estimated by linear and nonlinear regression analyses. The linear equation as a function of the adsorption concentration of the single compound in its solution and the competitive adsorption of a single compound in a mixed solution were then determined. The adsorption equilibrium data were then correlated to the linear, Langmuir, Freundlich, Langmuir-Freundlich and stoichiometric displacement theory for adsorption(SDT-A) isotherm models. The mixed compounds of the three compounds were competitively adsorbed on the C 18 particles. The expression of stoichiometric displacement theory for adsorption was found to be more suitable for adsorption of methylxanthines on a C 18 column.     

Preparation,evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins

Molecularly imprinted polymer (MIP) for solid extraction and preconcentration of catechins have been successfully prepared by a thermal polymerization method using quercetin as template, 4-vinylpyridine as functional monomer and ethylene glycol dimethacrylate as crosslinker. A solution mixture of acetone and acetonitrile was used as porogen. Systematic investigations of the influence of monomer, cross-linker, porogen, as well as polymerization conditions on the properties of the MIPs were carried out. The quercetin MIPs were evaluated according to their selective recognition properties for quercetin, structurally related compounds (catechin, epigallocatechin gallate and epicatechin) and a unrelated compound of similar molecular size (α-tocopherol). Good binding was observed for quercetin, catechin and epigallocatechin gallate with an optimized MIP in a solid phase extraction system. Adsorption and kinetic characteristics were evaluated for catechins which indicated that the synthesized polymer had high adsorption capacity and contained homogeneous binding sites. Chemical and morphological characterization of the MIP was investigated by FTIR, SEM and BET, which confirmed a high degree of polymerization. Finally, the MIP was successfully applied to the clean-up and preconcentration of catechins from several natural samples.     

3-氨基苯硼酸为功能单体在壳聚糖上印迹牛血清白蛋白的研究

以壳聚糖为载体, 3-氨基苯硼酸为功能单体对牛血清白蛋白进行了分子印迹的研究, 并对吸附过程进行Langmuir等温吸附模型的数据处理. 结果表明, 印迹聚合物上形成了对于模板分子有较高的吸附容量和选择性的识别位点, Langmuir等温吸附平衡常数为49.5 mL/mg, 结合位点的最大表观结合量为16.3 mg/g, 证明了该印迹聚合物对于牛血红蛋白和溶菌酶这些非模板蛋白的吸附不具有选择性.     

Band splitting in overloaded isocratic elution chromatography II. New competitive adsorption isotherms

The equations of two new binary competitive isotherms models are derived. The first of these models assumes that the isotherms of the two pure, single compounds have distinct monolayer capacities. Its derivation is based on kinetic arguments. The ideal adsorbed solution (IAS) framework was applied to derive the second model that is a thermodynamically consistent competitive isotherm. This second model predicts the competitive adsorption isotherm behavior of a mixture of two compounds that have single-component adsorption behavior following a BET and/or a Langmuir isotherms. Both models apply well to the binary adsorption of ethylbenzoate and 4-tert.-butylphenol on a Kromasil-C18 column (with methanol-water, 62:38, v/v, as the mobile phase). The best single-solute adsorption isotherms of these two compounds are the liquid-solid extended multilayer BET and the Langmuir isotherms, respectively. The kinetic and thermodynamic new competitive models were compared, regarding the accuracy of their prediction of the elution band profiles of mixtures of these two compounds. A better agreement between experimental and calculated profiles was observed with the kinetic model. The IAS model failed because the behavior of the ethylbenzoate/4-tert.-butylphenol adsorbed phase mixture is probably non-ideal. The most striking result is the qualitative prediction by these models of the peak splitting of 4-tert.-butylphenol during its elution in presence of ethylbenzoate.     

Adsorption isotherms on nicotinamide-imprinted polymer stationary phase

The molecular-imprinted technique is applied for the preparation of a polymer selector by using methacrylic acid as functional monomer, ethyleneglycol dimethacrylate as the cross-linker, 2,2'-azobisisobutyronitrile as the initiator, and nicotinamide as the template. The adsorption isotherms of nicotinamide and nicotinic acid and the competitive adsorption isotherms of nicotinamide and nicotinic acid on the imprinted stationary phase are determined using rectangular pulse frontal analysis and static method. Aqueous solution is used as the mobile phase in frontal analysis. It is found that the adsorption data fit well to both Langmuir and Freundlich isotherm models.     

Recognition of Staphylococcus enterotoxin via molecularly imprinted beads

The synthesis of molecularly imprinted beads for the recognition of the protein Staphylococcus enterotoxin B (SEB) is described. Two kinds of organic silane (3-aminopropyltrimethoxysilane (APTMS) and octyltrimethoxysilane (OTMS)) were polymerized on the surface of polystyrene microspheres after the SEB template was covalently immobilized by forming imine bonds. The resulting imprinted beads were selective for SEB. The Langmuir adsorption models were applied to describe the equilibrium isotherms. The results showed that an equal class of adsorption was formed in the molecularly imprinted polymer (MIP) with the maximum adsorption capacity of 3.86 mg SEB/g imprinted beads. The MIP has much higher adsorption capacity for SEB than the nonimprinted polymer, and the MIP beads have a higher selectivity for the template molecule.     

Modeling of the adsorption of organic compounds on polymeric nanofiltration membranes in solutions containing two compounds.

The adsorption of organic compounds in aqueous solution on polymeric nanofiltration membranes is studied; this process is one of the most important fouling mechanisms influencing the flux and retention behavior of nanofiltration membranes. It is shown that the adsorption of dissolved organic compounds on polymeric nanofiltration membranes is comparable to that on activated carbon. Freundlich and Langmuir isotherms are used to describe the relation between the adsorbed mass on the membrane and the equilibrium concentration of the organic compound in a single-compound solution. Based on these results, three models for the adsorption of solutions containing several compounds [i.e., the simple competitive adsorption model (SCAM), the model of Jain-Snoeyinck, and the model of Butler-Ockrent] were used to predict the adsorption behavior of an organic compound in an aqueous solution containing two compounds. The results of the three models were compared to experimental observations. It is shown that the SCAM allows a good prediction of the adsorption behavior.     

Miniaturized molecularly imprinted polymer extraction method for the gas chromatographic analysis of flavonoids

In this study, the use of monolithic molecularly imprinted polymers in a micropipette tip format allowing the simple and fast extraction of flavonoids from standard solutions and a black tea sample is demonstrated. The imprinted polymer employed quercetin, methacrylic acid or 4‐vinylpyridine, and ethylene glycol dimethacrylate as template, functional monomer, and cross‐linker, respectively. Surface morphologies of the quercetin‐imprinted polymers and the corresponding nonimprinted polymers were characterized by SEM. Extraction of flavonoid standards was performed to evaluate the selectivity and recovery with these imprinted and nonimprinted polymers. Flavonoid compositions in aliquots eluted from the tips were identified using fast GC with flame ionization detection. Maximum specific capacities of 0.2, 5.7, and 16.0 mg/g for catechin, morin, and quercetin, respectively, were obtained with the imprinted polymer prepared with methacrylic acid, with the corresponding recoveries of 99.8, 98.8, and 95.4%, respectively. Efficient extraction by the quercetin‐imprinted polymer of epicatechin, catechin, and quercetin from an apple‐flavored black tea sample was achieved, with GC–MS employed for compound identification for both the tea and extracted samples.     

Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol–gel process for the selective and rapid removal of di‐(2‐ethylhexyl) phthalate from aqueous solution

Magnetic molecularly imprinted polymer nanoparticles for di‐(2‐ethylhexyl) phthalate were synthesized by surface imprinting technology with a sol–gel process and used for the selective and rapid adsorption and removal of di‐(2‐ethylhexyl) phthalate from aqueous solution. The prepared magnetic molecularly imprinted polymer nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. The adsorption of di‐(2‐ethylhexyl) phthalate onto the magnetic molecularly imprinted polymer was spontaneous and endothermic. The adsorption equilibrium was achieved within 1 h, the maximum adsorption capacity was 30.7 mg/g, and the adsorption process could be well described by Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer displayed a good adsorption selectivity for di‐(2‐ethylhexyl) phthalate with respect to dibutyl phthalate and di‐n‐octyl phthalate. The reusability of magnetic molecularly imprinted polymer was demonstrated for at least eight repeated cycles without significant loss in adsorption capacity. The adsorption efficiencies of the magnetic molecularly imprinted polymer toward di‐(2‐ethylhexyl) phthalate in real water samples were in the range of 98–100%. These results indicated that the prepared adsorbent could be used as an efficient and cost‐effective material for the removal of di‐(2‐ethylhexyl) phthalate from environmental water samples.     

Synthesis and characterization of a novel quercetin magnetic molecularly imprinted polymer via reversible addition fragmentation chain transfer strategy

Molecularly imprinted polymer (MIP) will be modified on the surface of the core-shell structure silica magnetic nanoparticles, during which quercetin is used as a template molecule, acrylamide as a functional monomer, azo-bisisobutyronitrile as an initiator and ethylene glycol dimethacrylate as a cross-linker, to synthesize highly efficient and selective quercetin magnetic molecularly imprinted nanoparticles via Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization. FT-IR and X-ray diffraction (XRD) patterns are used to monitor the reaction and show the characteristic groups of each reaction step. Compared with the conventional bulk polymerization (2.7029 mg/g), the adsorption test showed that the MMIP by RAFT activity controlled polymerization had better absorption capacity for quercetin which the saturated adsorption amount was 4.8471 mg/g. Kinetic studies indicate that pseudo first order model is suitable to describe the adsorption mechanism. Thermodynamics experiment revealed that Langmuir model was more applied for explains the adsorption of quercetin onto magnetic molecularly imprinted polymer.     

Synergistic effects in competitive adsorption of carbohydrates on an ion-exchange resin

Adsorption of the three carbohydrates sucrose, glucose and fructose from aqueous solutions was investigated on an ion-exchange resin. The adsorption equilibrium of single components, binary and ternary mixtures was quantified by frontal analysis and the adsorption-desorption method. The experiments covered a concentration range up to 600 g/L at 60 degrees C and 80 degrees C. Within this range the adsorption isotherms of carbohydrates exhibited anti-Langmuirian behavior. Data of mixture adsorption revealed reversed competitive (synergistic or cooperative) effects, i.e., an increase of the concentration of one component of the mixture enhanced the adsorption of others. To model such an adsorption behavior the anti-Langmuir model has been used. The isotherm parameters determined for single components were used to simulate the competitive adsorption equilibria through the IAS (ideal adsorbed solution) theory. Finally, dynamic concentration profiles of multicomponent mixtures have been recorded. The shapes of adsorption and desorption curves confirmed the observed competitive effects found in the equilibrium studies. The breakthrough curves measured were simulated using the equilibrium theory as well as a numerical solution of the equilibrium dispersive model.     

Mechanism and equilibrium modeling of Re and Mo adsorption on a gel type strong base anion resin

A static-batch technique was used to demonstrate the adsorption behavior of Re (VII) and Mo ions onto Dowex 21K at equilibrium in single and binary component systems. The single equilibrium adsorption data were modeled through a linear form of four widely used equilibrium isotherm equations. The results indicated that Freundlich and D-R models for Re, and Temkin and D–R isotherms for Mo fitted the obtained data satisfactorily. Binary adsorptions of Re and Mo ions onto Dowex 21K were also analyzed using Extended Langmuir, Modified Langmuir, Extended Freundlich and Langmuir–Freundlich models. The competitive Extended Freundlich model fitted the binary adsorption equilibrium data adequately. Studies on mutual interference effects of Mo ions on Re adsorption capacity indicated that the adsorption of perrhenate ions is always suppressed. In this perspective, the results from EDX studies confirmed the rhenium atom decrease in the simulated Re–Mo adsorption. However, under the studied conditions the affinity of the Dowex 21K for rhenium ions is marginally greater than that of molybdenum ions.     

Selective recognition of 4-nitrophenol from aqueous solution by molecularly imprinted polymers with functionalized tetratitanate whisker composites as support

Three kinds of molecularly imprinted polymers (MIPs) were obtained with surface molecular imprinting technique on functionalized potassium tetratitanate whisker (F-PTW). The results of adsorption experiments indicated that MIP prepared using PTW modified with N-(2-aminoethyl)-3-(trimethoxysilyl)propylamine (AAPTS) (F-PTW A) as support [MIP(1)] was superior to the other two polymers, then MIP(1) was selected to analyze the 4-nitrophenol (4-NP) adsorption process from aqueous solution in this study. AAPTS offered hydrophilic exterior that allowed to self-assemble with the template 4-NP through intermolecular interaction rather than based on the interactions between the functional monomers and template. Equilibrium adsorption data were analyzed by the Langmuir and Freundlich isotherm models at various temperatures. Kinetic properties were successfully investigated by pseudo-first-order model, pseudo-second-order model, intraparticle diffusion equation, initial adsorption rate, half-adsorption time. A diffusion-controlled process as the essential adsorption rate-controlling step was also proposed. The performance of such imprinted polymer was further demonstrated by high-performance liquid chromatography, and the results showed that the selectivity of MIP(1) exhibited higher affinity for template 4-NP over competitive phenolic compounds than that of non-imprinted polymer NIP(1). MIP(1) could be reused four times without significant loss in the adsorption capacity.     

芦丁-槲皮素双模板印迹聚合物的制备、表征及识别

以芦丁(RT)-槲皮素(QT)为混合模板分子制备了芦丁-槲皮素复合模板分子印迹聚合物。 优化了制备条件,研究了模板用量比、功能单体及交联剂用量对印迹聚合物吸附性能的影响。 用傅里叶红外光谱和扫描电镜对分子印迹聚合物进行结构表征。 探讨了分子印迹聚合物的吸附动力学、等温吸附及键合位点特征,考察了其选择识别性能,并以分子印迹聚合物为吸附介质,萃取分离芦丁粗提液中的目标化合物。 结果表明,当槲皮素与芦丁的摩尔比为3:2,且模板总量与功能单体及交联剂用量摩尔比为1:8:10时,所得分子印迹聚合物的吸附性能最好,对槲皮素和芦丁的吸附量分别达47.86和60.97 mg/g。 吸附可在3.5 h内达到平衡,显示了较快的吸附动力学。 Scatchard分析表明,分子印迹聚合物基体中存在四类不同性能的键合位点,分别为芦丁和槲皮素的高亲和键合位点及非选择键合位点。 相对分布系数(k=K_d(RT)/K_d(QT),K_d=q_e/ρ_e,K_d为分布系数,q_e为平衡吸附量,ρ_e为平衡质量浓度)大于1,表明了分子印迹聚合物对芦丁具有更高的选择键合作用,当模拟混合物中芦丁和槲皮素浓度分别为0.07和0.03 mmol/L时,相对分布系数和分离因子(α=q_e(RT)/q_e(QT))分别达6.669和25.02。 另外,以乙腈、甲醇及甲醇-醋酸混合物依次为洗脱剂,通过分子印迹固相萃取可从槐米提取物中分离芦丁和槲皮素两种黄酮类化合物,总回收率分别为96.70%和94.67%。     

Exploration of a ternary deep eutectic solvent of methyltriphenylphosphonium bromide/chalcone/formic acid for the selective recognition of rutin and quercetin in Herba Artemisiae Scopariae

Methyltriphenylphosphonium bromide/chalcone/formic acid, a green ternary deep eutectic solvent, was applied as a functional monomer and dummy template simultaneously in the synthesis of a new molecularly imprinted polymer. Ternary deep eutectic solvent based molecularly imprinted polymers are used as a solid‐phase extraction sorbent in the separation and purification of rutin and quercetin from Herba Artemisiae Scopariae combined with high‐performance liquid chromatography. Fourier transform infrared spectroscopy and field‐emission scanning electron microscopy were applied to characterize the deep eutectic solvent based molecularly imprinted polymers synthesized using different molar ratios of chalcone. The static and competitive adsorption tests were performed to examine the recognition ability of the molecularly imprinted polymers to rutin and quercetin. The ternary deep eutectic solvent consisting of formic acid/chalcone/methyltriphenylphosphonium bromide (1:0.05:0.5) had the best molecular recognition effect. After optimization of the washing solvents (methanol/water, 1:9) and eluting solvents (acetonitrile/acetic acid, 9:1), a reliable analytical method was developed for strong recognition towards rutin and quercetin in Herba Artemisiae Scopariae with satisfactory extraction recoveries (rutin: 92.48%, quercetin: 94.23%). Overall, the chalcone ternary deep eutectic solvent‐based molecularly imprinted polymer coupled with solid‐phase extraction is an effective method for the selective purification of multiple bioactive compounds in complex samples.     

电子束辐射聚合制备槲皮素-镍(Ⅱ)金属配位分子印迹聚合物及其识别性能研究

以电子束为辐照射线源,采用辐射聚合法成功制备了槲皮素-Ni(Ⅱ)金属配位分子印迹聚合物.通过紫外光谱研究了槲皮素与Ni(Ⅱ)之间的配位结构、配位作用方式及配位比,并按照1∶2的比例形成稳定配合物,同时也验证了槲皮素、Ni(Ⅱ)及功能单体甲基丙烯酸三者发生了金属配位印迹作用.利用红外光谱对产物的结构进行了表征.透射电镜、扫描电镜、吸附动力学实验分别考察辐射剂量对聚合物的微观形貌、吸附动力学性能的影响,结果表明辐射剂量对印迹聚合物的吸附性能有显著影响.同时选择性吸附实验结果显示该印迹聚合物对槲皮素-Ni(Ⅱ)配合物表现出明显的吸附选择性和特异性,最大结合量可达82.22μmol/g.对黄芩素和柚皮素的吸附选择性较差,分离因子分别为3.915和5.443.     

Novel surface modified molecularly imprinted polymer using acryloyl-β-cyclodextrin and acrylamide as monomers for selective recognition of lysozyme in aqueous solution

A novel protein imprinted polymer for selective recognition of lysozyme was obtained. Acryloyl-β-cyclodextrin, which offered hydrophilic exterior and hydrophobic cavity that were allowed to self-assemble with the template protein through hydrogen interaction and hydrophobic interaction, was synthesized and used as the functional monomer. Polymerization was carried out in the presence of acrylamide as an assistant monomer, which resulted in a new type of protein imprinted polymer. Langmuir adsorption model was employed to describe the isotherms, and maximum adsorption capacity was evaluated. The performance of such imprinted polymer was further demonstrated by high-performance liquid chromatography, and the results showed that the column packed with the lysozyme imprinted silica beads could effectively separate lysozyme from the mixture of lysozyme–cytochrome c, lysozyme–bovine serum albumin, lysozyme–avidin or lysozyme–methylated bovine serum albumin, which showed its high selectivity.     

Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine

Atrazine contamination of water is of considerable concern because of the potential hazard to human health. In this study, a magnetic molecularly imprinted polymer for atrazine was prepared by the surface‐imprinting technique using Fe₃O₄ as the core, mesoporous silica as the carrier, atrazine as the template, and itaconic acid as the functional monomer. The magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, and vibration‐sample magnetometry. The binding properties of the magnetic molecularly imprinted polymer toward atrazine were investigated by adsorption isotherms, kinetics, and competitive adsorption. It was found that the adsorption equilibrium was achieved within 2 h, the maximum adsorption capacity of atrazine was 8.8 μmol/g, and the adsorption process could be well described by the Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer exhibited good adsorption selectivity for atrazine with respect to structural analogues, such as cyanazine, simetryne, and prometryn. The reusability of the magnetic molecularly imprinted polymer was demonstrated for at least five repeated cycles without a significant decrease in adsorption capacity. These results suggested that the magnetic molecularly imprinted polymer could be used as an efficient material for the selective adsorption and removal of atrazine from water samples.     

Development of molecularly imprinted polymeric nanofibers by electrospinning and applications to pesticide adsorption

Novel polystyrene‐based molecularly imprinted polymer nanofibers were synthesized through the electrospinning technique. The molecularly imprinted polymers were prepared using a non‐covalent approach and atrazine as template. For comparison, nonimprinted polymer nanofibers were also synthesized. The morphology of the synthesized nanofibers was characterized using scanning electron microscopy. The adsorption of pesticides, atrazine, atrazine desisopropyl, atraton, carboxin, linuron, and chlorpyrifos was studied under equilibrium (batch) conditions. To describe the adsorption capability of the synthesized polymers, Langmuir and Freundlich models were used. The Freundlich model provided a better mathematical approximation of the sorption characteristic for polymers nanofibers. To evaluate the adsorption capacity in the presence of interferents experiments on river water samples spiked with a mixture of six pesticides were also performed. The results obtained for the highest concentration levels investigated, show a greater amount of pesticide adsorbed on molecularly imprinted polymers and non‐imprinted polymers compared to those obtained using commercial stationary phases used as reference.     

Design and preparation of imprinted surface plasmon resonance (SPR) nanosensor for detection of Zn(II) ions

A novel Zn(II) ions imprinted poly (2-hydroxyethyl Methacrylate-N-methacryloyl-(L)-histidine methyl ester) poly(HEMAH) surface plasmon resonance (SPR) nanosensor were designed for detection of Zn(II) ions in aqueous solution and artificial plasma providing a low cost, rapid and reliable results compared to other techniques such as atomic absorption spectroscopy, inductively coupled plasma-mass spectrometer, X-ray fluorescence with synchrotron radiation. Zn(II) ions imprinted nanofilm on the SPR chip surface was synthesized by bulk polymerization. Characterization of Zn(II) ions imprinted nanosensor was performed by contact angle measurement, atomic force microscopy (AFM), ellipsometry and Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR). Designed nanosensor was applied for selective detection of Zn(II) ions in aqueous solution within the range of 0.5–1.0?µg/mL. The limit of detection (LOD) and limit of quantification (LOQ) were calculated as 0.19 and 0.64?ng/mL, respectively. Association kinetics analysis, Scatchard, Langmuir, Freundlich, Langmuir–Freundlich, Tempkin and Dubinin-Radushkevich isotherms were analyzed to the experimental data in order to identify the adsorption behavior. The selectivity of the SPR nanosensor was examined by using competitive metal ions such as Cd(II), Cu(II), Pb(II), and Fe(II). To evaluate the imprinting effect of Zn(II) ions imprinted (MIP) and non-imprinted (NIP) nanosensor was also prepared as the control. Repeatability of the response signal was tested by four times adsorption–desorption–regeneration cycle.