Unnatural Cytosine Bases Recognized as Thymines by DNA Polymerases by the Formation of the Watson–Crick Geometry

The emergence of unnatural DNA bases provides opportunities to demystify the mechanisms by which DNA polymerases faithfully decode chemical information on the template. It was previously shown that two unnatural cytosine bases (termed “M‐fC” and “I‐fC”), which are chemical labeling adducts of the epigenetic base 5‐formylcytosine, can induce C‐to‐T transition during DNA amplification. However, how DNA polymerases recognize such unnatural cytosine bases remains enigmatic. Herein, crystal structures of unnatural cytosine bases pairing to dA/dG in the KlenTaq polymerase‐host–guest complex system and pairing to dATP in the KlenTaq polymerase active site were determined. Both M‐fC and I‐fC base pair with dA/dATP, but not with dG, in a Watson–Crick geometry. This study reveals that the formation of the Watson–Crick geometry, which may be enabled by the A‐rule, is important for the recognition of unnatural cytosines.     

Formation of an amino-acid-binding pocket through adaptive zippering-up of a large DNA hairpin loop

Background: In vitro selection has identified DNA aptamers that target cofactors, amino acids, peptides and proteins. Structure determination of such ligand-DNA aptamer complexes should elucidate the details of adaptive DNA structural transitions, binding-pocket architectures and ligand recognition. We have determined the solution structure of the complex of a DNA aptamer containing a guanine-rich 18-residue hairpin loop that binds l-argininamide with ∼ 100μM affinity.Results: The DNA aptamer generates its l-argininamide-binding pocket by adaptive zippering up the 18-residue loop through formation of Watson-Crick pairs, mismatch pairs and base triples, while maximizing stacking interactions. Three of the four base triples involve minor-groove recognition through sheared G·A mismatch formation. The unique fold is also achieved through positioning of an adenine residue deep within the minor groove and through nestling of a smaller loop within the larger loop on complex formation. The accessibility to the unique l-argininamide-binding pocket is restricted by a base pair that bridges across one side of the major-groove-binding site. The guanidinium group of the bound l-argininamide aligns through intermolecular hydrogen-bond formation with the base edges of nonadjacent guanine and cytosine residues while being sandwiched between the planes of nonadjacent guanine residues.Conclusions: The available structures of l-arginine/l-argininamide bound to their DNA and RNA targets define the common principles and patterns associated with molecular recognition, as well as the diversity of intermolecular hydrogen-bonding alignments associated with the distinct binding pockets.     

High‐Resolution Crystal Structure of a Silver(I)–RNA Hybrid Duplex Containing Watson–Crick‐like CSilver(I)C Metallo‐Base Pairs

Metallo‐base pairs have been extensively studied for applications in nucleic acid‐based nanodevices and genetic code expansion. Metallo‐base pairs composed of natural nucleobases are attractive because nanodevices containing natural metallo‐base pairs can be easily prepared from commercially available sources. Previously, we have reported a crystal structure of a DNA duplex containing T? Hg^II? T base pairs. Herein, we have determined a high‐resolution crystal structure of the second natural metallo‐base pair between pyrimidine bases C? Ag^I? C formed in an RNA duplex. One Ag^I occupies the center between two cytosines and forms a C? Ag^I? C base pair through N3? Ag^I? N3 linear coordination. The C? Ag^I? C base pair formation does not disturb the standard A‐form conformation of RNA. Since the C? Ag^I? C base pair is structurally similar to the canonical Watson–Crick base pairs, it can be a useful building block for structure‐based design and fabrication of nucleic acid‐based nanodevices.     

Four-stranded DNA structures can be stabilized by two different types of minor groove G:C:G:C tetrads

Four-stranded nucleic acid structures are central to many processes in biology and in supramolecular chemistry. It has been shown recently that four-stranded DNA structures are not only limited to the classical guanine quadruplex but also can be formed by tetrads resulting from the association of Watson-Crick base pairs. Such an association may occur through the minor or the major groove side of the base pairs. Structures stabilized by minor groove tetrads present distinctive features, clearly different from the canonical guanine quadruplex, making these quadruplexes a unique structural motif. Within our efforts to study the sequence requirements for the formation of this unusual DNA motif, we have determined the solution structure of the cyclic oligonucleotide dpCCGTCCGT by two-dimensional NMR spectroscopy and restrained molecular dynamics. This molecule self-associates, forming a symmetric dimer stabilized by two G:C:G:C tetrads with intermolecular G-C base pairs. Interestingly, although the overall three-dimensional structure is similar to that found in other cyclic and linear oligonucleotides of related sequences, the tetrads that stabilize the structure of dpCCGTCCGT are different to other minor groove G:C:G:C tetrads found earlier. Whereas in previous cases the G-C base pairs aligned directly, in this new tetrad the relative position of the two base pairs is slipped along the axis defined by the base pairs. This is the first time that a quadruplex structure entirely stabilized by slipped minor groove G:C:G:C tetrads is observed in solution or in the solid state. However, an analogous arrangement of G-C base pairs occurs between the terminal residues of contiguous duplexes in some DNA crystals. This structural polymorphism between minor groove GC tetrads may be important in stabilization of higher order DNA structures.     

Effect of loop distortion on the stability and structural dynamics of DNA hairpin and dumbbell conjugates

The thermal stability and conformational dynamics of DNA hairpin and dumbbell conjugates having short A-tract base pair domains connected by tri- or hexa(ethylene glycol) linkers is reported. The formation of stable base-paired A-tract hairpins having oligo(ethylene glycol) linkers requires a minimum of four or five A-T base pairs. The formation of base-paired dumbbells having oligo(ethylene glycol) linkers by means of chemical ligation of nicked dumbbells requires a minimum of two A-T base pairs on either side of the nick. Molecular modeling indicates that the hexa(ethylene glycol) linker is sufficiently long to permit formation of strain-free loop regions and B-DNA base pair domains. In contrast, the tri(ethylene glycol) is too short to permit Watson-Crick base pairing between the bases attached to the linker. The shorter linker distorts the duplex, resulting in fluxional behavior in which the base pairs adjacent to the linker and at the open end of the hairpin dissociate on the nanosecond time scale. The loss of interstrand binding energy caused by these fluctuations leads to a difference of approximately 5 degrees C in melting temperature between EG3 and EG6 hairpins. An analysis of the fluxional behavior of the EG3 adjacent base-pair has been used to study the pathways for base flipping and base stacking, including the identification of rotated base (partially flipped) intermediates that have not been described previously for A-T base pairs.     

Structural and dynamic variations in DNA hexamers containing T-T and F-F single and tandem internal mispairs

Molecular dynamics simulations of double-helical DNA oligomers have been performed to investigate differences in the structure, dynamics, and hydration of F-F and T-T mispairs. Hexamers containing F-F pairs were found to be more dynamic, especially in the region of the mispair itself. This dynamic variability derives from greater flexibility of F-F pairs. The T-T mispairs, on the other hand, were found to be comparatively tightly bound as wobble pairs. The major and minor groove edges of the T-T pairs were observed to be solvated at exposed carbonyl positions by at least one water molecule, while F-F pairs lacked solvating waters. Stacking interactions were nearly identical for T-T and F-F pairs, leading to similar average structures, even though F stacking was more dynamically variable. Solvation differences between F-F and T-T therefore support the steric exclusion model for nucleotide incorporation in DNA replication. Large differences in the orientation of minor groove functional groups, in addition to differences in solvation, further rationalize why F bases present during DNA extension events induce stalls. Two novel nucleotides are proposed to further elucidate minor groove interactions of DNA with polymerase molecules.Electronic Supplementary Material This Material consists of equilibration protocol, plots of center-of-mass stacking, water radial distribution functions, helical parameter dynamics, and dynamics data for a control AT sequence. Supplementary material is available in the online version of this article at Contribution to the Jacopo Tomasi Honorary Issue     

5-Aza-7-deazaguanine–Isoguanine and Guanine–Isoguanine Base Pairs in Watson–Crick DNA: The Impact of Purine Tracts,Clickable Dendritic Side Chains,and Pyrene Adducts

The Watson–Crick coding system depends on the molecular recognition of complementary purine and pyrimidine bases. Now, the construction of hybrid DNAs with Watson–Crick and purine–purine base pairs decorated with dendritic side chains was performed. Oligonucleotides with single and multiple incorporations of 5-aza-7-deaza-2′-deoxyguanosine, its tripropargylamine derivative, and 2′-deoxyisoguanosine were synthesized. Duplex stability decreased if single modified purine–purine base pairs were inserted, but increased if pyrene residues were introduced by click chemistry. A growing number of consecutive 5-aza-7-deazaguanine–isoguanine base pairs led to strong stepwise duplex stabilization, a phenomenon not observed for the guanine–isoguanine base pair. Spacious residues are well accommodated in the large groove of purine–purine DNA tracts. Changes to the global helical structure monitored by circular dichroism spectroscopy show the impact of functionalization to the global double-helix structure. This study explores new areas of molecular recognition realized by purine base pairs that are complementary in hydrogen bonding, but not in size, relative to canonical pairs.     

Functionalized Silver-Ion-Mediated α-dC/β-dC Hybrid Base Pairs with Exceptional Stability: α-d-5-Iodo-2′-Deoxycytidine and Its Octadiynyl Derivative in Metal DNA

Silver-mediated α-dC–Ag⁺–β-dC hybrid base pairs decorated with 5-iodo- or 5-octadiynyl residues are well accommodated in duplex DNA. A strong T_m increase and favorable thermodynamic data for duplex DNA were observed after addition of silver ions. The phenomenon is particularly obvious when both nucleobases of the base pairs are functionalized. Neither the position of the base pair, nor the type of 5-substituent had a negative influence. On the contrary, functionalization of conventional silver-mediated β-dC–Ag⁺–β-dC homo base pairs showed a negative impact induced by the bulky substituents. To this end, cytosine modified 12-mer oligodeoxynucleotides were prepared by solid-phase synthesis employing new α-anomeric 2′-deoxycytidine phosphoramidites. A multigram scale synthesis was developed for 5-iodo-α-d -2′-deoxycytidine ( 1 ) employing the direct glycosylation of cytosine with Hoffer's α-d -halogenose followed by separation of anomeric DMT nucleosides. Regarding base-pair stability and functionalization silver-mediated α/β-dC hybrid base pairs were found to be superior to β/β-dC homo pairs. According to their extraordinary properties, they might find applications in DNA diagnostics, material science, or nanotechnology.     

Solution structure of S-DNA formed by covalent base pairing involving a disulfide bond

Here, we present the solution structure of a DNA duplex containing a disulfide base pair (S-DNA). The unnatural nucleoside "S" possessing a thiophenyl group as base was incorporated into a self-complementary singled-stranded oligonucleotide. Crosslinking of the disulfide base pair was analyzed by non-denaturing polyacrylamide gel electrophoresis. Under oxidizing conditions a high molecular weight band as 18 mer, corresponding to the double-stranded molecule (5'-GCGASTCGC: 3'-CGCTSAGCG), was found, whereas single-stranded self-complementary 9 mer oligonucleotide GCGASTCGC was detected in the presence of a reducing agent. These results suggest that the oligonucleotide is covalently linked by disulfide bonding under oxidizing conditions, which can be reversibly reduced to two thiol groups under reducing conditions. CD spectrum of S-DNA (CGASTCG) under oxidizing conditions suggested that the duplex had a right-handed double-stranded structure similar to that of natural DNA (B-form, CGATCG). NMR studies confirmed that this CGASTCG resembled natural B-DNA and that the two phenyl rings derived from the disulfide base pairing intercalated into the duplex. However, these two phenyl rings were not positioned in the same plane as the other base pairs. Specifically, NOEs suggest that although CGASTCG adopts a structure similar to B-type DNA, the S-DNA duplex is bent at the point of disulfide base pairing to face the major groove.     

Regulated Incorporation of Two Different Metal Ions into Programmed Sites in a Duplex by DNA Polymerase Catalyzed Primer Extension

Metal‐mediated base pairs formed by the coordination of metal ions to natural or artificial bases impart unique chemical and physical properties to nucleic acids and have attracted considerable interest in the field of nanodevices. Ag^I ions were found to mediate DNA polymerase catalyzed primer extension through the formation of a C–Ag^I–T base pair, as well as the previously reported C–Ag^I–A base pair. The comparative susceptibility of dNTPs to Ag^I‐mediated enzymatic incorporation into the site opposite cytosine in the template was shown to be dATP>dTTP?dCTP. Furthermore, two kinds of metal ions, Ag^I and Hg^II, selectively mediate the incorporation of thymidine 5′‐triphosphate into sites opposite cytosine and thymine in the template, respectively. In other words, the regulated incorporation of different metal ions into programmed sites in the duplex by DNA polymerase was successfully achieved.     

Hydrophobic, Non-Hydrogen-Bonding Bases and Base Pairs in DNA

We report the properties of hydrophobic isosteres of pyrimidines and purines in synthetic DNA duplexes. Phenyl nucleosides 1 and 2 are nonpolar isosteres of the natural thymidine nucleoside, and indole nucleoside 3 is an analog of the complementary purine 2-aminodeoxyadenosine. The nucleosides were incorporated into synthetic oligodeoxynucleotides and were paired against each other and against the natural bases. Thermal denaturation experiments were used to measure the stabilities of the duplexes at neutral pH. It is found that the hydrophobic base analogs are nonselective in pairing with the four natural bases but selective for pairing with each other rather than with the natural bases. For example, compound 2 selectively pairs with itself rather than with A, T, G, or C; the magnitude of this selectivity is found to be 6.5-9.3 °C in Tm or 1.5-1.8 kcal/mol in free energy (25 °C). All possible hydrophobic pairing combinations of 1, 2, and 3 were examined. Results show that the pairing affinity depends on the nature of the pairs and on position in the duplex. The highest affinity pairs are found to be the 1-1 and 2-2 self-pairs and the 1-2 heteropair. The best stabilization occurs when the pairs are placed at the ends of duplexes rather than internally; the internal pairs may be destabilized by imperfect steric mimicry which leads to non-ideal duplex structure. In some cases the hydrophobic pairs are significantly stabilizing to the DNA duplex; for example, when situated at the end of a duplex, the 1-1 pair is more stabilizing than a T-A pair. When situated internally, the affinity of the 1-1 pair is the same as, or slightly better than, the analogous T-T mismatch pair, which is known to have two hydrogen bonds. The studies raise the possibility that hydrogen bonds may not always be required for the formation of stable duplex DNA-like structure. In addition, the results point out the importance of solvation and desolvation in natural base pairing, and lend new support to the idea that hydrogen bonds in DNA may be more important for specificity of pairing than for affinity. Finally, the study raises the possibility of using these or related base pairs to expand the genetic code beyond the natural A-T and G-C pairs.     

Highly polar carbohydrates stack onto DNA duplexes via CH/π interactions

Carbohydrate-nucleic acid contacts are known to be a fundamental part of some drug-DNA recognition processes. Most of these interactions occur through the minor groove of DNA, such as in the calicheamicin or anthracycline families, or through both minor and major groove binders such as in the pluramycins. Here, we demonstrate that carbohydrate-DNA interactions are also possible through sugar capping of a DNA double helix. Highly polar mono- and disaccharides are capable of CH/π stacking onto the terminal DNA base pair of a duplex as shown by NMR spectroscopy. The energetics of the carbohydrate-DNA interactions vary depending on the stereochemistry, polarity, and contact surface of the sugar involved and also on the terminal base pair. These results reveal carbohydrate-DNA base stacking as a potential recognition motif to be used in drug design, supramolecular chemistry, or biobased nanomaterials.     

Interaction of Antitumor Drug Aclacinomycin‐A with DNA and Its Specific Sequence Site

Through UV and fluorescence spectrophotometries, the interaction of aclacinomycin‐A (ACM‐A) with DNA and its specific sequence have been investigated with the aid of circular dichroism spectrophotometry and differential pulse voltammetry method. The results demonstrated that ACM‐A was capable of intercalating DNA double helix, the π‐π electronic overlapping between π‐electrons of ACM‐A and base pair of DNA stabilized the ACM‐A‐DNA adduct, and through electrostatic interaction, the trisaccharide interacted with the minor groove of DNA owing to an amino group at C(3′). Electrochemical and spectroelectrochemical studies revealed that the original form of ACM‐A had higher affinity for DNA than the reduction form in which the trisaccharide group at C(7) was lost. According to the results obtained in this paper, ACM‐A showed preference for AT base pairs of the deoxyribonucleic acid duplex, and it was apt to interact with cytosine and thymine rather than the adenine of oligonucleotide.     

Structural Landscape of the Transition from an ssDNA Dumbbell Plus Its Complementary Hairpin to a dsDNA Microcircle Via a Kissing Loop Intermediate

The experimental construction of a double-stranded DNA microcircle of only 42 base pairs entailed a great deal of ingenuity and hard work. However, figuring out the three-dimensional structures of intermediates and the final product can be particularly baffling. Using a combination of model building and unrestrained molecular dynamics simulations in explicit solvent we have characterized the different DNA structures involved along the process. Our 3D models of the single-stranded DNA molecules provide atomic insight into the recognition event that must take place for the DNA bases in the cohesive tail of the hairpin to pair with their complementary bases in the single-stranded loops of the dumbbell. We propose that a kissing loop involving six base pairs makes up the core of the nascent dsDNA microcircle. We also suggest a feasible pathway for the hybridization of the remaining complementary bases and characterize the final covalently closed dsDNA microcircle as possessing two well-defined U-turns. Additional models of the pre-ligation complex of T4 DNA ligase with the DNA dumbbell and the post-ligation pre-release complex involving the same enzyme and the covalently closed DNA microcircle are shown to be compatible with enzyme recognition and gap ligation.     

寡聚酰胺为探针的电化学DNA生物传感器

DNA分子中的碱基对可以长程传递电荷, DNA分子中的碱基π堆积结构为电荷的长程传递提供了良好的通道. 电荷在DNA分子中的传递受碱基序列的影响, 利用这种性质可以构建DNA碱基错配检测的电化学传感器. 寡聚酰胺能和DNA以小沟绑定方式高亲和力地结合, 并且具有序列识别功能, 本文以带有硝基官能团的寡聚酰胺分子为电化学探针, 设计了电化学DNA生物传感器. 结果显示, 寡聚酰胺与DNA修饰电极作用后, 电化学响应显著增强, 并且可以作为检测DNA碱基错配的电化学探针分子.     

Replication Experiments with Nucleotide Base Analogues

The principles governing the replication fidelity of genomes are not fully understood yet. Watson and Crick's base-pairing principle for matched deoxyribonucleotide (DNA) bases can explain why the guanine–cytosine and adenine-thymine base pairs are approximately one hundred times more stable thermodynamically than mismatched combinations. In vitro, DNA polymerases reduce the number of mismatched base pairs to about 10^?6 per Watson–Crick base pair. Replication fidelity can further be enhanced to a mutation probability of 10^?10or less in vivo if optimal conditions for DNA synthesis are provided by polymerase–assisting proteins and DNA-repairing enzymes. The precise reasons for the formation of mismatched base pairs (mispairs), which are responsible for a substantial part of DNA mutations, are still in debate. Although it is agreed that a template-directed “reading” of the hydrogen-substitution pattern in the heterocyclic bases is crucial for proper base pairing during DNA synthesis, it is not clear which type of “misreading” leads to mispairs. Misreading may be due to a non-Watson–Crick base pairing as well as to a change in the hydrogen-substitution pattern, leading to Watson-Crick-like mispairs. The surprising discovery of the selective and quantitative DNA-polymerase-catalyzed formation of a pyridine-pyrimidine base pair (involving a nucleotide base analogue) indicated that rare tautomeric forms in template DNA strands can lead to Watson-Crick-like mispairings that are hardly recognized by the polymerase's proofreading activity. This reveals new pathways for substitution mutations (replication-dependent DNA point mutations) and suggests a new type of mutagen in vivo.     

Solution structure of a DNA duplex containing a biphenyl pair

Hydrogen-bonding and stacking interactions between nucleobases are considered to be the major noncovalent interactions that stabilize the DNA and RNA double helices. In recent work we found that one or multiple biphenyl pairs, devoid of any potential for hydrogen bond formation, can be introduced into a DNA double helix without loss of duplex stability. We hypothesized that interstrand stacking interactions of the biphenyl residues maintain duplex stability. Here we present an NMR structure of the decamer duplex d(GTGACXGCAG) d(CTGCYGTCAC) that contains one such X/Y biaryl pair. X represents a 3',5'-dinitrobiphenyl- and Y a 3',4'-dimethoxybiphenyl C-nucleoside unit. The experimentally determined solution structure shows a B-DNA duplex with a slight kink at the site of modification. The biphenyl groups are intercalated side by side as a pair between the natural base pairs and are stacked head to tail in van der Waals contact with each other. The first phenyl rings of the biphenyl units each show tight intrastrand stacking to their natural base neighbors on the 3'-side, thus strongly favoring one of two possible interstrand intercalation structures. In order to accommodate the biphenyl units in the duplex the helical pitch is widened while the helical twist at the site of modification is reduced. Interestingly, the biphenyl rings are not static in the duplex but are in dynamic motion even at 294 K.     

Analysis of stacking overlap in nucleic acid structures: algorithm and application

RNA contains different secondary structural motifs like pseudo-helices, hairpin loops, internal loops, etc. in addition to anti-parallel double helices and random coils. The secondary structures are mainly stabilized by base-pairing and stacking interactions between the planar aromatic bases. The hydrogen bonding strength and geometries of base pairs are characterized by six intra-base pair parameters. Similarly, stacking can be represented by six local doublet parameters. These dinucleotide step parameters can describe the quality of stacking between Watson–Crick base pairs very effectively. However, it is quite difficult to understand the stacking pattern for dinucleotides consisting of non canonical base pairs from these parameters. Stacking interaction is a manifestation of the interaction between two aromatic bases or base pairs and thus can be estimated best by the overlap area between the planar aromatic moieties. We have calculated base pair overlap between two consecutive base pairs as the buried van der Waals surface between them. In general, overlap values show normal distribution for the Watson–Crick base pairs in most double helices within a range from 45 to 50 Å² irrespective of base sequence. The dinucleotide steps with non-canonical base pairs also are seen to have high overlap value, although their twist and few other parameters are rather unusual. We have analyzed hairpin loops of different length, bulges within double helical structures and pseudo-continuous helices using our algorithm. The overlap area analyses indicate good stacking between few looped out bases especially in GNRA tetraloop, which was difficult to quantitatively characterise from analysis of the base pair or dinucleotide step parameters. This parameter is also seen to be capable to distinguish pseudo-continuous helices from kinked helix junctions.