The effect of TiO2 on phase separation and crystallization of glass-ceramics in CaO–MgO–Al2O3–SiO2–Na2O system

The experiments were carried out on studying the effect of phase separation on nucleation and crystallization in the glass based on the system of CaO–MgO–Al₂O₃–SiO₂–Na₂O. In the experiments, TiO₂ was chosen as nucleating agent. Three batches of 5, 8 and 10 wt% TiO₂ substitution were investigated by the techniques of DSC, XRD, FTIR and FESEM equipped with EDS. XRD and FTIR analysis indicated that the super cooled glasses were all amorphous, the heat treatment leading to nucleation would cause a disruption of silica network which followed phase separation. The phase separation followed the generation of crystal seeds Mg(Ti, Al)₂O₆. FESEM observation and EDS analysis revealed that the more TiO₂ content of glass, the more droplet separated phase and crystal seeds after nucleation heat treatment. The main crystal phase is clinopyroxene, Ca(Ti, Mg, Al)(Al, Si)O₆, of crystallized glass.     

Non-isothermal crystallization kinetics of La2CaB10O19 from glass

The non-isothermal crystallization kinetics of La₂CaB₁₀O₁₉ (LCB) from a La₂O₃-CaO-B₂O₃ glass was studied. Differential thermal analysis methods were performed on three glass powders to obtain the kinetic parameters of LCB crystallization mechanism. The activation energies for overall crystallization (E), obtained by the methods of Kissinger and Ozawa, were in the range of 479-569 kJ/mol. Multiple (five) analysis methods were used to estimate the Avrami exponent (n), which could consequently be reduced into the single value of n = 3.1 ± 0.3. The growth morphology index (m) of LCB was corroborated by microscopy (optical and electron) images, which revealed a three dimensional growth. Energy dispersive spectroscopy confirmed that LCB is the crystallizing phase from the glass by an interface controlled mechanism. The parameters of the Johnson-Mehl-Avrami kinetic model for the analysis of LCB crystallization from glass were found to be n = m = 3.     

Static and dynamic crystallization in Mg–Cu–Y bulk metallic glass

The static and dynamic crystallization behavior of Mg₆₅Cu₂₅Y₁₀ bulk metallic glass was investigated by X-ray diffraction, differential scanning calorimetry and transmission electron microscopy. It was found that the kinetics of both anisothermal and isothermal crystallization were adequately represented by the Kissinger and KJMA relations, respectively. The apparent activation energy for crystallization was calculated to be 139 kJ/mol; this value is close to the self diffusion of Mg in both a crystalline and non-crystalline matrix. The Avrami exponent was found to vary from 2.2 to 2.5 with increasing annealing temperature which implies that, at high annealing temperatures, nucleation occurs at a constant rate accompanied by diffusion-controlled growth of spherical grains. Tensile straining in the supercooled liquid region indicated that crystallization is slightly accelerated compared with static crystallization; this phenomenon was found to adversely affect the ductility of the alloy.     

A mössbauer study of hematite dissolution and devitrification in float glass

The effect of 5% hematite on the devitrification behaviour of float glass has been measured as functions of time and temperature by Mössbauer spectroscopy and X-ray diffraction (XRD). The devitrification products are devitrite (Na₂O·3CaO·6SiO₂), cristobalite, quartz and an iron-rich pyroxene, aegirine ((Na Ca)(Fe, Mg) Si₂O₆) for which XRD data are tabulated. The Mössbauer parameters for glassy and crystalline materials are interpreted in terms ofthe aegirine structure, whose site assignment is discussed in terms of next-nearest neighbour effecs. The bulk dissolution data obtained by Mössbauer and XRD are used to generate diffusion coefficients for Fe³⁺ in the glass melt, using a moving boundary model for diffusion controlled dissolution. The diffusion coefficients at 800°C are D_{Fe³⁺ (XRD)} = 3.52 × 10^?15 cm²/s and D_{Fe³⁺ (MS)} = 1.27 × 10^?15 cm²/s.     

Non-isothermal crystallization kinetic studies on MgO–Al2O3–SiO2–TiO2 glass

Thermal stability and crystallization kinetics of the glass 21% MgO, 21.36% Al₂O₃, 53.32% SiO₂ and 4.11% TiO₂ (mol%) has been studied using differential thermal analysis (DTA), dilatometry and X-ray diffraction (XRD). Glass in both bulk and frit forms were produced by melting in platinum crucible at 1600 °C for 1–2 h. From variation of DTA peak maximum temperature with heating rate, the activation energies of crystallization were calculated to be 340 kJ mol⁻¹ and 498 kJ mol⁻¹ for first and second crystallization exotherms, respectively. Crystallization of bulk glass was carried out at various temperatures and for different time durations in the range of 850–1000 °C. The influence of the addition of TiO₂ on the crystallization sequence of the glass was experimentally determined and discussed.     

Preparation of new glass systems by the polymeric precursor method for dental applications

Glass ionomer cements (GICs) are largely employed in Dentistry for several applications, such as luting cements for the attachment of crowns, bridges, and orthodontic brackets as well as restorative materials. The development of new glass systems is very important in Dentistry to improve of the mechanical properties and chemical stability. The aim of this study is the preparation of two glass systems containing niobium in their compositions for use as GICs. Glass systems based on the composition SiO₂-Al₂O₃-Nb₂O₅-CaO were prepared by chemical route at 700 °C. The XRD and DTA results confirmed that the prepared materials are glasses. The structures of the obtained glasses were compared to commercial material using FTIR, ²⁷Al and ²⁹Si MAS-NMR. The analysis of FTIR and MAS-NMR spectra indicated that the systems developed and commercial material are formed by SiO₄ and AlO₄ linked tetrahedra. These structures are essential to get the set time control and to have cements. These results encourage further applications of the experimental glasses in the formation of GICs.     

Effects of Li replacement on the nucleation, crystallization and microstructure of Li2O-Al2O3-SiO2 glass

The Li replacement including the Li₂O replaced by other oxides and the expensive Li₂CO₃ replaced by low-cost spodumene mineral was studied to lower the product cost of (Li₂O-Al₂O₃-SiO₂, LAS) glass ceramic, and the effects of Li replacement on the nucleation, crystallization and microstructure of LAS glass were investigated by the differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that Li₂O replacement increases the crystallization activation energy, lowers the crystal growth, and increases the nucleation and crystallization temperature by restraining the formation of crystalline phases. The Li₂CO₃ replacement decreases the crystallization activation energy, promotes the crystal growth, without affecting the nucleation, and lowers the crystallization temperature by adding some beneficial compositions with mixed alkali effect.     

Nucleation and growth of needle-like fluorapatite crystals in bioactive glass–ceramics

The nucleation behaviors of glass–ceramics with different Ca–mica (Ca_0.5Mg₃AlSi₃O₁₀F₂)/fluorapatite ratios were investigated. By using differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscope with an energy dispersive spectrometer (SEM/EDS), the effect of CaO and P₂O₅ addition on the nucleation behaviors was studied. Results showed that the addition of CaO and P₂O₅ promoted nucleation process and led to the formation of different nucleation phases. After further heat treatment, Ca₅(PO₄)₃F crystals were of needle-like morphology, instead of particle-like reported in previous studies. This can be attributed to the one-dimensional rapid growth of fluorapatite along the c-axis. The values of the Avrami parameter, n, and the dimensionality of crystal growth, m, are found to be 2 and 1, respectively, which indicated that the bulk nucleation is the dominant mechanism in crystallization, and one-dimensional growth of fluorapatite is preferred. Since needle-like fluorapatite crystals are of the same morphology to hydroxyapatites in human bones, the glass–ceramics thus prepared show excellent bioactivity in vivo.     

A comparison of natural and experimental long-term corrosion of uranium-colored glass

The alteration features of historical U-colored glasses exposed to natural weathering for over 150 years were compared with the experimental alteration of similar glass with ～0.3 wt% of uranium using a long-term (up to 426 days) kinetic laboratory batch leaching test in deionized water. Two types of natural corrosion crusts were identified by a combination of SEM/EDS, HRTEM/SAED, EPMA and XRD: (i) formation of a leached layer (up to ～600 μm thick) depleted in alkalis and enriched in Si with stable concentration of U and Al and (ii) formation of lamellae depleted in alkalis, Si and U and enriched in Al. The presence of newly formed gibbsite (Al(OH)₃) and kaolinite (Al₂Si₂O₅(OH)₄) were confirmed in the second type of corrosion crust by HRTEM. Dissolution of the glass components including uranium was determined during the laboratory leaching test. Several μm thick alkali-depleted alteration zones with stable U content relatively enriched in Si and Al were formed on the glass surface. The PHREEQC-2 modeling also predicted the precipitation of secondary gibbsite and kaolinite in the late stages of the leaching. These phases may form especially when sufficient amounts of Al are available from the environment (e.g., soil). Furthermore, they provide surfaces for sorption and may, in some cases, affect the mobility of U ions released from the glass in dependence on pH and U speciation.     

Thermal properties of chalcogenide glasses in the GeSe2–As2Se3–CdSe system

In the present work, thermal properties of GeSe₂–As₂Se₃–CdSe glasses were investigated via DSC measurements. The dependences of glass transition temperature and thermal stability on glass composition were discussed. XRD measurement was also performed to validate the effect of cadmium on the thermal properties of glasses. The calculated Avrami exponent was used to demonstrate the three-dimensional growth of crystals in the glass matrices. The crystallization kinetics for the glasses was studied by using the modified Kissinger and Ozawa equations.     

Characterization of a mould flux glass

A simplified mould flux glass composition used for the continuous casting of steel was synthesized and then characterized using X-ray powder diffraction (XRD) differential thermal analysis (DTA) and ¹⁹F and ²⁹Si magic angle spinning nuclear magnetic resonance spectroscopy (MAS-NMR). DTA showed the glass to have a low glass transition temperature and to crystallize readily at 600 °C. XRD of the heat-treated glass showed it to crystallize to cuspidine. ¹⁹F MAS-NMR showed the principal fluorine species to be F-Ca(n) with no evidence of Si-F or Al-F species. Fluoride ions therefore, complex calcium in this glass, rather than forming non-bridging fluorines. The network connectivity of the glass was calculated on this basis and found to be 2.07 this would be expected to correspond to a Q² Si species which was supported by the ²⁹Si data that gave a chemical shift of −78 ppm corresponding to Q² Si.     

Effect of BaO on the crystallization kinetics of glasses along the Diopside-Ca-Tschermak join

We report on the effect of BaO on the crystallization kinetics of glasses in the diopside (CaMgSi₂O₆)-Ca-Tschermak (CaAl₂SiO₆) system. Partial substitution (i.e. 5%, 10% and 20%) of Ba²⁺ for Ca²⁺ was attempted in composition CaMg_0.8Al_0.4Si_1.8O₆, in three different glasses while partial substitution of B³⁺ for Al³⁺ was made in the fourth glass. Structural investigations on the glasses have been made by density measurements, molar volume and Infra-red spectroscopy (FTIR). Non-isothermal crystallization kinetic studies have been employed to study the mechanism of crystallization in all the four glasses. The Avrami parameter for the glass powders is ∼2, indicating the existence of intermediate mechanism of crystallization. Crystallization sequence in the glasses has been followed by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and FTIR. Augite crystallized out being the dominant phase in all the glass-ceramics, while different polymorphs of BaAl₂Si₂O8 were present as secondary or minor phases.     

Evaluation of glass ionomer cements properties obtained from niobium silicate glasses prepared by chemical process

Glass ionomer cements (GICs) are glass and polymer composite materials. These materials currently find use in the dental field. The purpose of this work is to obtain systems based on composition 4.5SiO₂–3Al₂O₃–XNb₂O₅–2CaO to be used in Dentistry. The systems were prepared by chemical route at 700 °C. The results obtained by XRD and DTA showed that all systems prepared are glasses. The structures of the obtained glasses were compared to commercial material using ²⁷Al and ²⁹Si MAS NMR. The analysis of MAS NMR spectra indicated that the systems developed and commercial material are formed by SiO₄ and AlO₄ linked tetrahedra. The properties of glass ionomer cements based on the glasses prepared with several niobium contents were studied. Setting and working times of the cement pastes, microhardness and diametral tensile strength were evaluated for the experimental GICs and commercial luting cements. It was concluded that setting time of the cement pastes increased with increasing niobium content of the glasses (X). The properties to the GICs such as setting time and microhardness were influenced by niobium content.     

Non-isothermal crystallization kinetics of ZnO-BaO-B2O3-SiO2 glass

Glass of composition 40SiO₂-30BaO-20ZnO-10B₂O₃ (mol%) was made by conventional melting and casting process. Crystallization kinetics of above glass has been investigated under non-isothermal conditions, using the formal theory of transformations for heterogeneous nucleation. The procedure is applied to the experimental data obtained by differential thermal analysis (DTA), using continuous-heating techniques. The crystallization results are analyzed, and both the activation energy of crystallization process as well as the crystallization mechanism is characterized. Dilatometric measurement of this glass was also done and data obtained was used to calculate the viscosity of the formed glass. Development of crystalline phases on thermal treatments of the glass at various temperatures has been analyzed by X-ray diffraction. Microstructure of the crystalline phases was investigated by scanning electron microscopy (SEM) and the development of various structural features with variation in heat treatment cycle was observed. The nucleation and growth of these phases in the matrix of glass has been described and discussed.     

Thermal stability and crystallization phenomena of low cost Ti-based bulk metallic glass

The thermal stability, kinetics of crystallization, and glass forming ability of a Ti₄₈Ni₃₂Cu₈Si₈Sn₄ bulk amorphous alloy have been studied by differential scanning calorimetry using both isothermal and non-isothermal experiments. The activation energy, frequency factor, and reaction rate for the crystallization cascade were determined via the Kissinger method. X-ray diffractometry and transmission electron microscopy studies revealed that crystallization starts with the primary precipitation of Ti(Ni,Cu), followed by the nucleation of Cu₃Ti from the amorphous precursor. The kinetics of nucleation of the primary crystalline phase was also investigated using the Johnson–Mehl-Avrami method and the Avrami exponent, n, was determined. This new alloy possesses a significantly larger supercooled liquid region than any other non beryllium- or non rare earth – containing titanium-based bulk metallic glass to date.     

Ca–Mg mixing in aluminosilicate glasses: An investigation using 17O MAS and 3QMAS and 27Al MAS NMR

To better understand non-framework cation mixing in Ca–Mg aluminosilicate glasses, ¹⁷O MAS and 3QMAS NMR studies were done on glasses on the Mg₃Al₂Si₃O₁₂–Ca₃Al₂Si₃O₁₂ join as well as several compositions with lower Al/Si ratios. While not all of the oxygen sites are fully resolved, the non-bridging oxygen associated with two Ca and one Mg cations is under-represented relative to that predicted by a model assuming random Ca/Mg mixing. Therefore, local non-bridging oxygen environments are rich in Mg, and extra Ca must be associated with charged bridging oxygens such as Al–O–Si. The deviation from random mixing increases as the Al/Si ratio decreases and as X_Mg approaches 0.50, suggesting a reduction in configurational entropy that may be compensated for by other sources, including mixing of network forming cations. Al–O–Al is detected, and appears to increase with increasing X_Mg and increasing Al/Si. High field ²⁷Al MAS NMR also shows that these glasses all have substantial concentrations of ^[5]Al, but no detectable ^[6]Al (0.5% detection limit). The amount of ^[5]Al increases non-linearly as X_Mg increases and very slightly as Al/Si increases.     

Influence of alumina addition on crystallization and texturing behavior of LaBGeO5 glass

The structure and crystallization behavior of glasses with 25La₂O₃ · 25B₂O₃ · 50GeO₂ composition, melted in platinum (P glass) and corundum (A glass) crucibles, were studied by DTA, X-ray diffraction and FTIR spectroscopy. The Al₂O₃ dissolved from corundum crucible in the A glass was estimated to be in the range 5–7 wt%. This alumina content had almost no influence on glass transition temperature but strongly affected the structure and crystallization behavior of the A glass. In fact, the P glass showed good texture-forming ability: high quality textured glass-ceramic plates based on stillwellite-like LaBGeO₅ crystals were easily obtained. On the contrary, the presence of alumina stabilized the A glass from which binary phases crystallize first, and only afterwards they are transformed in stillwellite by secondary crystallization: so in this glass texturing is hindered. Crystallization and texturing behavior of P and A glasses were well related to FTIR data. P glass contained both threefold and fourfold coordinated boron while in the A glass the presence of aluminum forced boron to assume almost exclusively threefold co-ordination. Hence the easier crystallization of stillwellite phase and the good textures obtained from the P glass contrary to the A glass, can be well understood since all boron atoms have tetrahedral co-ordination in stillwellite LaBGeO₅ crystal.     

Structural characterization of light-induced crystal growth in Se98Sb2 chalcogenide glass

The present paper reports the detailed study of crystallization morphology of light-induced crystal growth in Se₉₈Sb₂ chalcogenide glass using DSC, XRD and SEM techniques. Thermally-activated crystallization of the samples in powder form is analyzed by Differential Scanning Calorimetry (DSC) at different heating rates under non-isothermal conditions. The activation energy of crystallization has been calculated by analyzing the data using the classical Johnson–Mehl–Avrami (JMA) model.Amorphous thin films of Se₉₈Sb₂ are used for light-induced crystal growth. The d.c. conductivity of the films is taken as a characteristic quantity to measure the extent of light-induced crystal growth. X-ray diffraction (XRD) analysis has been carried out on Se₉₈Sb₂ samples for different illumination time and their diffractograms are analyzed to obtain information about various crystallographic aspects. Scanning electron microscopy has been used to confirm light-induced crystal growth.     

Luminescence properties of Tb3+/Sm3+ co-doped 38B2O3―31Al2O3―31SrO glasses and glass ceramics

In this paper, Tb³⁺/Sm³⁺ co-doped 38B₂O₃―31Al₂O₃―31SrO glass was successfully prepared. After heat treatment, single crystal phase SrAl₂B₂O₇ was precipitated from the parent glass. DTA data showed the glass transition temperature at 625 °C and a sharp exothermic peak at 860 °C. XRD patterns demonstrated a regular evolution from glass to glass ceramics with higher treatment temperature and longer treatment time. From the XRD patterns, we supposed that Tb³⁺/Sm³⁺ ions can be most likely contained in the crystal phase. The photoluminescence spectra showed that the crystallization can enhance the emission intensity significantly and there could be an optimum crystallization degree to get the strongest luminescence in glass ceramics. The light scattering of devitrification sample can vary the intensity ratio of Sm³⁺ and Tb³⁺ emission. Therefore, as a potential route, rare earth ions doped glass ceramics could be a further research direction of luminescence glasses for white light emitting diodes application.     

Structural changes of mullite precursors in presence of polyethyleneimine

Thermal properties of two powders derived from the same calcined gel with a stoichiometric mullite composition (atomic ratio Al/Si =3/1) wet milled in different solutions were studied by simultaneous differential thermal analysis, thermogravimetry and evolved gas analysis (DTA,TG,EGA, respectively), by density measurements and by ²⁹Si MAS NMR spectroscopy and X-ray diffraction (XRD). Calcined gel was milled either in ethanol or in ethanol with the addition of 0.03 g of polyethyleneimine (PEI) per gram of mullite. DTA, TG and mass spectrometry revealed esterification of unhydrated surface of particles formed by milling in ethanol. The difference in the structural evolution of powders and their dependence on annealing temperature seen in ²⁹Si MAS NMR spectra and XRD patterns is attributed to different degrees of segregation of alumina and silica components, and to differing compositions of transitory spinel phase. In both samples the segregation of silica and alumina was observed at temperatures less than that for mullite crystallization. The degree of segregation was much smaller in the sample milled in ethanol. Therefore, in the latter sample spinel with larger silica content incorporated in γ-Al₂O₃ will crystallize by annealing at 900°C, and Al-rich mullite at 1100°C. Due to greater segregation of silica and alumina component in the presence of PEI, the crystallization of spinel with smaller amounts of silica incorporated into γ-Al₂O₃ is shifted to 1100°C, and orthorhombic mullite to about 1200°C. The influence of PEI is indicated by a larger sintering density at lower temperatures.