Changeover during in situ compositional modulation of hexacyanoferrate (Prussian Blue) material

This paper describes the importance of (H2O)6 clusters in controlling the properties of hexacyanoferrate (Prussian Blue) materials. A careful in situ study of compositional changes by using electrogravimetric techniques (in ac and dc modes) in hexacyanoferrates containing K+ alkali metals reveals the existence of a changeover in the properties of these films in a narrow potential range. Control of the compositional variation of the changeover is dependent on the K+ stoichiometric number in the compound structure. However, a specific K+ occupation in the compound structure activates the occupation of the (H2O)6 cluster by H3O+ and/or H+, causing the changeover in the properties of hexacyanoferrate film. Thus, the information thus obtained is very useful for understanding the mechanisms involved in the electrochemical reversible switch between ferrimagnetism/paramagnetism, "semiconductor/metal" and electroluminescence/nonelectroluminescence properties of molecular cyanide materials.     

Ex situ and in situ characterization of stress corrosion cracking of nickel-base alloys at high temperature

Recent ex situ and in situ characterization of the major factors influencing primary water stress corrosion cracking (PWSCC) and outside diameter stress corrosion cracking (ODSCC) of nickel-base alloys of Alloy 600 and Alloy 690 as the structural materials in pressurized water reactors (PWRs) was introduced to understand cracking mechanisms. In the primary water environment of PWRs, the effect of stress on PWSCC was analyzed using the in situ direct-current potential drop method combined with electrochemical noise measurement. The compositional and microstructural changes around a crack tip including the oxide film formed during crack propagation were evaluated by using ex situ microscopic methods with energy-dispersive spectroscopy (EDS). The equivalent local strain was also evaluated by using the electron backscatter diffraction method as ex situ technique. With the aid of ex situ and in situ characterization, it was proposed that the intergranular precipitation of Cr oxides ahead of the crack tip by O penetration along the grain boundary that make the “oxidized grain boundary” can significantly increase the susceptibility to PWSCC propagation of the alloys. In the secondary water environment of PWRs, the properties of oxide film formed on the surface of the alloys were characterized as a function of the Pb content as impurity by using in situ methods of potentiodynamic polarization measurement and electrochemical impedance spectroscopy and ex situ techniques of EDS and X-ray photoelectron spectroscopy. From these ex situ and in situ characterizations, the degradation model of the passivity of the surface oxide film by Pb incorporation was proposed to understand the ODSCC mechanism.     

In situ solid-state NMR characterization of pharmaceutical materials: An example of drug-polymer thermal mixing

Pharmaceutical amorphous solid dispersions, a multicomponent system prepared by dispersing drug substances into polymeric matrix via thermal and mechanical processes, represent a major platform to deliver the poorly water-soluble drug. Microscopic properties of drug-polymer contacts play mechanistic roles in manipulating long-term physical stability as well as dissolution profiles. Although solid-state nuclear magnetic resonance has been utilized as an indispensable tool to probe structural details, previous studies are limited to ex situ characterizations. Our work provides likely the first documented example to investigate comelting of ketoconazole and polyacrylic acid, as a model system, in an in situ manner. Their physical mixture is melted and mixed in the solid-state nuclear magnetic resonance rotor under magic angle spinning at up to approximately 400 K. Critical structural events of molecular miscibility and interaction have been successfully identified. These results design and evaluate the instrumental and experimental protocols for real-time characterizations of the comelting of pharmaceutical materials.     

Magnetism and surface structure of atomically controlled ultrathin metal films

We review the correlation of magnetism and surface structure in ultrathin metal films, including the tailoring of novel magnetic properties using atomic scale control of the nanostructure. We provide an overview of modern fabrication and characterization techniques used to create and explore these fascinating materials, and highlight important phenomena of interest. We also discuss techniques that control and characterize both the magnetic and structural properties on an atomic scale. Recent advances in the development and applications of these techniques allow nanomagnetism to be investigated in an unprecedented manner.A system cannot necessarily retain a two-dimensional structure as it enters the ultrathin region, but it can transform into a three-dimensional, discontinuous structure due to the Volmer–Weber growth mechanism. This structural transformation can give rise to superparamagnetism. During this evolution, competing factors such as interparticle interactions and the effective magnetic anisotropy govern the magnetic state. These magnetic parameters are influenced by the nanostructure of the film. In particular, controlling the magnetic anisotropy is critical for determining the magnetic properties. Surface effects play especially important roles in influencing both the magnitude and direction of the magnetic anisotropy in ultrathin films. By properly altering the surface structure, the strength and direction of the magnetic anisotropy are controlled via spin–orbit and/or dipole interactions.     

An electrochemical quartz crystal impedance study on the rising of an aqueous solution meniscus for a partially immersed gold electrode during the electrochemical reduction of oxygen.

An electrochemical quartz crystal impedance system (EQCIS) was used to study the resonance behavior of an AT-cut 9-MHz piezoelectric quartz crystal (PQC) with its Au electrode partially immersed in KCl, Na2SO4 and NaClO4 aqueous solutions, respectively. An in situ determination of the immersed area and the height of the electrode was achieved by simultaneous measurements of the PQC electroacoustic admittance and the electrochemical impedance. The rising of the solution meniscus for a gold electrode partially immersed in aqueous solutions was found at oxygen reduction potentials and evaluated versus the electrolyte, electrolyte concentration, solution pH and oxygen concentration. The solution meniscus rising was explained based on a lowering of the contact-angle hysteresis and a continued collection of the water product at the solid-gas-solution interface during oxygen reduction.     

Understanding Structural Evolution in the Synthesis of Advanced Energy Materials

Developing a variety of in situ characterization techniques to unravel the structural/chemical evolution during the synthesis of various advanced energy materials for studying the relationship among those experimental conditions and the structure is the key to implement the controllable synthesis of battery materials.This perspective summarizes the recent studies into structural evolution during in situ synthesis of various advanced energy materials by synchrotron X-ray diffraction technique and forecasts the more extensive applications in the future.     

Immobilized Molybdovanadophosphoric Acid for Selective Oxidations

In this review, we have summarized our work on the immobilization of molybdovanadophosphoric acids onto mesoporous silica and mesoporous carbon by different approaches such as amine functionalization and ionic liquid functionalization. All catalyst materials were well characterized by various ex-situ and in situ techniques for their structural integrity and physico-chemical properties. These materials were tested in different selective oxidation processes to develop environmentally benign protocols for the synthesis of fine chemicals and tried to study their mechanisms.     

In Situ Monitoring of Generation and Precipitation of Ferric Hydroxide Sol with a Piezoelectric Quartz Crystal Impedance Analyzer

The piezoelectric quartz crystal (PQC) impedance technique was applied to monitor in situ generation and precipitation of the ferric hydroxide sol in aqueous solutions at 90 degrees C. Equivalent circuit parameters and resonant frequencies as well as the half-peak width of the electroacoustic conductance spectrum deltaf(G1/2) for the PQC resonance were obtained and analyzed. Three stages, sol generation and simultaneous adsorption, adsorption equilibrium, and precipitation of ferric hydroxide sol could be identified in the process of adding the ferric nitrate solution into the hot water. A scheme of two consecutive reactions occurring at the electrode/solution interface was used to analyze the adsorption kinetics of ferric hydroxide sol onto the Au electrode. In addition, the electrolyte-induced precipitation of the colloid was monitored and discussed. Temperature effect on the PQC resonance behavior in liquid was also investigated. Since the PQC impedance technique provides multidimensional piezoelectric information in situ, it is highly recommended for studying the process of sol-gel generation and precipitation. Copyright 2001 Academic Press.     

[(18‐Crown‐6)K][Fe(1)Cl(1)4]0.5[Fe(2)Cl(2)4]0.5: A Multifunctional Molecular Switch of Dielectric,Conductivity and Magnetic Properties

Multifunctional materials that exhibit different physical properties in a single phase have potential for use in multifunctional devices. Herein, we reported an organic–inorganic hybrid compound [(18‐crown‐6)K][Fe(1)Cl(1)₄]_0.5[Fe(2)Cl(2)₄]_0.5 ( 1 ) by incorporating KCl and FeCl₃ into a 18‐crown‐6 molecule, which acts as a host of the six O atoms providing a lone pair of electrons to anchor the guest potassium cation, and [FeCl₄]^? as a counterion for charge balance to construct a complex salt. This salt exhibited a one‐step reversible structural transformation giving two separate high and low temperature phases at 373 K, which was confirmed by systematic characterizations including differential scanning calorimetry (DSC) measurements, variable‐temperature structural analyses, and dielectric, impedance, variable‐temperature magnetic susceptibility measurements. Interestingly, the structural transformation was coupled to both hysteretic dielectric phase transition, conductivity switch and magnetic‐phase transition at 373 K. This result gives an idea for designing a new type of phase‐transition materials harboring technologically important magnetic, conductivity and dielectric properties.     

Ground- and excited-state properties of inorganic solids from full-potential density-functional calculations

The development in theoretical condensed-matter science based on density-functional theory (DFT) has reached a level where it is possible, from “parameter-free” quantum mechanical calculations to obtain total energies, forces, vibrational frequencies, magnetic moments, mechanical and optical properties and so forth. The calculation of such properties are important in the analyses of experimental data and they can be predicted with a precision that is sufficient for comparison with experiments. It is almost impossible to do justice to all developments achieved by DFT because of its rapid growth. Hence, it has here been focused on a few advances, primarily from our laboratory. Unusual bonding behaviors in complex materials are conveniently explored using the combination of charge density, charge transfer, and electron-localization function along with crystal-orbital Hamilton-population analyses. It is indicated that the elastic properties of materials can reliably be predicted from DFT calculations if one takes into account the structural relaxations along with gradient corrections in the calculations. Experimental techniques have their limitations in studies of the structural stability and pressure-induced structural transitions in hydride materials whereas the present theoretical approach can be applied to reliably predict properties under extreme pressures. From the spin-polarized, relativistic full-potential calculations one can study novel materials such as ruthenates, quasi-one-dimensional oxides, and spin-, charge-, and orbital-ordering in magnetic perovskite-like oxides. The importance of orbital-polarization correction to the DFT to predict the magnetic anisotropy in transition-metal compounds and magnetic moments in lanthanides and actinides are emphasized. Apart from the full-potential treatment, proper magnetic ordering as well as structural distortions have to be taken into account to predict correctly the insulating behavior of transition-metal oxides. The computational variants LDA and GGA fail to predict insulating behavior of Mott insulators whereas electronic structures can be described correctly when correlation effects are taken into account through LDA+U or similar approaches to explain their electronic structures correctly. Excited-state properties such as linear optical properties, magneto-optical properties, XANES, XPS, UPS, BIS, and Raman spectra can be obtained from accurate DFT calculations.     

Ultrasonic characterization of proteins and blood cells

Ultrasound changes its intensity and speed when propagating through a liquid or a suspension containing particles. In addition it generates a weak electric signal by altering the motion of ions and charged particles. Hence acoustic and electroacoustic measurements provide information about the properties of suspended particles and molecules. Here we present both acoustic and electroacoustic results on blood suspensions and protein solutions, relevant to life sciences. For blood cells a strong increase in acoustic attenuation with volume fraction is found, from which the speed of sound in an erythrocyte is found to be about 1900 m/s, assuming the attenuation is due to scattering only. A similar value of 1700 m/s is found from the increase in sound speed of the dispersion with concentration. Electroacoustic measurements on bovine serum albumin (BSA) yield a charge of about seven elementary charges per BSA molecule. These results show the power and usefulness of acoustic and electroacoustic measurement techniques for biological systems.     

Ultrasonic characterization of proteins and blood cells

Ultrasound changes its intensity and speed when propagating through a liquid or a suspension containing particles. In addition it generates a weak electric signal by altering the motion of ions and charged particles. Hence acoustic and electroacoustic measurements provide information about the properties of suspended particles and molecules. Here we present both acoustic and electroacoustic results on blood suspensions and protein solutions, relevant to life sciences. For blood cells a strong increase in acoustic attenuation with volume fraction is found, from which the speed of sound in an erythrocyte is found to be about 1900 m/s, assuming the attenuation is due to scattering only. A similar value of 1700 m/s is found from the increase in sound speed of the dispersion with concentration. Electroacoustic measurements on bovine serum albumin (BSA) yield a charge of about seven elementary charges per BSA molecule. These results show the power and usefulness of acoustic and electroacoustic measurement techniques for biological systems.     

Electrical impedance spectroscopy characterisation of conducting membranes: II. Experimental

An electrical impedance spectroscopy (EIS) method and apparatus that eliminates the need for electrodes in the feed and permeate solutions was evaluated as a means of characterising physical and performance properties of polysulphone ultrafiltration membranes in situ. The membranes were sputter-coated on one side with platinum before assembly in the apparatus. Alternating electrical current used for impedance measurements was injected directly into the coat via dry electrical contacts with the edges of the membrane. As the frequency of the EIS measurement was increased the current increasingly dispersed into the solution via the interfacial region (double layer) and/or fouling layers that the coat formed with the solution. These spatial dispersions manifested as characteristic dispersions with frequency of the impedance of the system. Water flux measurements, field emission scanning electron microscopy and atomic force microscopy were also used to quantify the important membrane performance parameters of porosity and surface roughness. These estimates were in good agreement with the impedance model for the in situ membrane system that was fitted to the measured impedance dispersions. The study shows that EIS measurements potentially can quantify membrane performance parameters in situ better than those techniques that require disruption of the membrane separation process. The method also has the potential for monitoring the deposition of particulate that can lead to fouling.     

Functional inorganic nanofillers for transparent polymers

The integration of inorganic nanoparticles into polymers has been used for the functionalization of polymer materials with great success. Whereas in traditional polymer composites, micron sized particles or agglomerates typically cause significant light scattering hampering optical applications, in nanocomposites the particle dimensions are small enough for the production of highly transparent composites. A challenge for the generation of such materials is to develop an integrated synthesis strategy adapting particle generation, surface modification and integration inside the polymer. Surface grafting using polymerizable surfactants or capping agents allows for linking the particles to the polymer. Novel techniques such as in situ polymerization and in situ particle processing are beneficial to avoid aggregation of inorganic particles inside the polymer matrix. The functions associated with inorganic fillers are widespread. Layered silicates and related materials are nowadays commercially available for improving mechanical and barrier properties in packaging. With the availability of highly transparent materials, the focus has shifted towards optical functions such as luminescence and UV-protection in transparent polymers. IR-active fillers are used in laser-holography for transparent poly(methyl methacrylate) (PMMA) nanocomposites. Refractive index modulation and ultrahigh refractive index films were developed based on inorganic materials such as PbS. The integration of magnetic nanoparticles has a great potential for applications such as electromagnetic interference shielding and magneto-optical storage.This tutorial review will summarize functions associated with the integration of inorganic nanofillers in polymers with a focus on optical properties.     

有机磁体--新世纪的新材料

有机磁性材料是最近二十多年发展起来的新型的功能材料 ,因为其结构的多样性 ,可用化学方法合成 ,可得到磁性能与机械、光、电等方面结合的综合性能等特点 ,在超高频装置、高密度存贮材料、吸波材料、微电子工业和宇航等需要轻质磁性材料的领域有很大的应用前景。本文综述了有机磁性化合物的发展和研究近况。     

Graphite Oxides: Effects of Permanganate and Chlorate Oxidants on the Oxygen Composition

Research on graphene materials has refocused on graphite oxides (GOs) in recent years. The fabrication of GO is commonly accomplished by using concentrated sulfuric acid in conjunction with: a) fuming nitric acid and KClO₃ oxidant (Staudenmaier); b) concentrated nitric acid and KClO₃ oxidant (Hofmann); c) sodium nitrate for in situ production of nitric acid in the presence of KMnO₄ (Hummers); or d) concentrated phosphoric acid with KMnO₄ (Tour). These methods have been used interchangeably in the graphene community, since the properties of GOs produced by these different methods were assumed as almost similar. In light of the wide applicability of GOs in nanotechnology applications, in which presence of certain oxygen functional groups are specifically important, the qualities and functionalities of the GOs produced by using these four different methods, side‐by‐side, was investigated. The structural characterizations of the GOs would be probed by using high resolution X‐ray photoelectron spectroscopy, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and Raman spectroscopy. Further electrochemical applicability would be evaluated by using electrochemical impedance spectroscopy and cyclic voltammetry techniques. Our analyses highlighted that the oxidation methods based on permanganate oxidant (Hummers and Tour methods) gave GOs with lower heterogeneous electron‐transfer rates and a higher amount of carbonyl and carboxyl functionalities compared with when using chlorate oxidant (Staudenmaier and Hofmann methods). These observations indicated large disparities between the GOs obtained from different oxidation methods. Such insights would provide fundamental knowledge for fine tuning GO for future applications.     

Hierarchical Structures Based on Functionalized Magnetic Cores and Layered Double‐Hydroxide Shells: Concept,Controlled Synthesis,and Applications

The combination of magnetic particles and layered double hydroxide (LDHs) materials leads to the formation of hierarchical composites that can take full advantages of each component; this is an effective approach for achieving multifunctional materials with intriguing properties. This Concept article summarizes several important strategies for the fabrication of magnetic‐core/LDH‐shell hierarchical nanocomposites, including direct coprecipitation, layer‐by‐layer assembly, and in situ growth methods. The obtained nanocomposites exhibit excellent performance as multifunctional materials for promising applications in targeted drug delivery, efficient separation, and catalysis. The fabrication and application of magnetic‐core/LDH‐shell nanocomposite materials represent a new direction in the development of LDH‐based multifunctional materials, which will contribute to the progress of chemistry and material science.     

In situ electroacoustic monitoring of polyelectrolyte adsorption onto protein-coated oil droplets

The purpose of this study was to compare the ability of electroacoustic (EA) and microelectrophoresis (ME) techniques for monitoring the adsorption of an anionic polysaccharide onto the surfaces of oppositely charged protein-coated oil droplets. The zeta-potential values determined by the EA technique were in excellent agreement with those determined by the ME technique. Both techniques were able to monitor the adsorption of pectin onto the surfaces of beta-lactoglobulin-coated droplets as a function of pectin concentration and pH. The major advantage of the EA technique was that it could be carried out in situ without having to dilute the emulsions, so that the equilibrium between adsorbed and non-adsorbed polyelectrolyte was not disturbed by dilution. Nevertheless, the good agreement between the zeta-potential values determined by the EA and ME techniques suggested that emulsion dilution did not cause an appreciable change in polysaccharide partitioning for the system used in this study. In summary, the EA technique appears to be a powerful means of monitoring polyelectrolyte adsorption in concentrated colloidal dispersions.