A pilot study for the production of a certified reference material for trace elements in honey

In the context of the general mandate of the European Union Community Reference Laboratory (CRL) for residues in living animals and their products established at the Istituto Superiore di Sanità, a pilot study was undertaken to assess the possibility of producing a new certified reference material (CRM) for trace elements in a matrix of honey. The elements considered were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V and Zn. Their determination was performed by inductively coupled plasma (ICP)-based techniques. Data obtained with different ICP techniques were generally in good agreement. In light of these results, the next step was the effective production of a candidate CRM in a honey matrix. In the preliminary phase, two different types of honey, i.e., Eucalyptus (solid and sticky) and Robinia (viscous and sticky), were pretreated at the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (EC-JRC-IRMM) in order to produce the materials candidate for the certification process. Approximately 600 ampoules were thus produced for the Robinia honey and 450 ampoules for the Eucalyptus honey, each ampoule containing 5 g of an aqueous solution of honey (with 20% and 30% high purity water, respectively) and sealed under inert gas (Ar). A ring test to determine the levels of the chemical elements and a long-term study to evaluate the stability of the samples is in progress. Tentative figures for the analytes of interest are (in ng g⁻¹): Robinia, As, 1.28±0.09; Cd, 0.59±0.08; Cr, 2.36±0.21; Cu, 57.6±3.2; Fe, 209±9; Mn, 90.8±3; Ni, 18.1±0.6; Pb, 23±1.5; Sn, 8.10±0.35; V, 1.19±0.37; and Zn, 178±4; Eucalyptus, As, 3.18±0.21; Cd, 0.70±0.08; Cr, 2.73±0.22; Cu, 141±6; Fe, 926±16; Mn, 1905±81; Ni, 7.77±0.4; Pb, 138±4; Sn, 7.97±0.16; V, 3.47±0.15; and Zn, 405±9.     

Quantitative estimation of constituents in fly ash by lithium tetraborate fusion

Silica is removed from fly ash sample by hydroflourination for its effective determination gravimetrically and the remaining residue is subjected to lithium tetraborate (Li₂B₄O₇) fusion followed by dissolution in dilute nitric acid to obtain a clear solution in which elements including aluminum (Al), iron (Fe), calcium (Ca), magnesium (Mg), sodium (Na), potassium (K), titanium (Ti), vanadium (V), chromium (Cr), manganese (Mn), nickel (Ni), copper (Cu) and zinc (Zn), have been determined by Flame Atomic Absorption Spectrometry (FAAS). Two fly ash samples analyzed by the proposed method have been received from the National Council of Cement and Building Materials (NCCBM), India (proposed CRM in future) and fly ash CRM 1633 (b) from NIST, USA. The validity of the method has been established by analyzing fly ash CRM 1633 (b) as reference standard. The standard deviation has been calculated for each measurement.     

Measurement of progesterone in human serum by isotope dilution liquid chromatography–tandem mass spectrometry and comparison with the commercial chemiluminescence immunoassay

Progesterone is one of the steroid hormones. The hormone is especially important in preparing the uterus for the implantation of the blastocyst and in maintaining pregnancy. Its concentration in serum is measured to determine ovarian function and to predict early pregnancy. The progesterone concentration is also important for in-vitro fertilization and embryo-transfer outcomes. We have established isotope dilution liquid chromatography–tandem mass spectrometry as a primary method for the measurement of progesterone in human serum. Progesterone and its isotopic analogue, progesterone-¹³C₂, in serum were monitored at mass transitions of m/z 315.2/109.2 and 317.2/111.2 respectively in multiple-reaction monitoring (MRM) mode with electrospray positive ionization. For validation of the method, progesterone in a National Institute of Standards and Technology standard reference material (NIST SRM) was measured, and the measured results were in good agreement with the reference values within the uncertainty. On the basis of the established method, progesterone certified reference material (CRM) was developed in this work. The certified value was (1.41 ± 0.036) μg kg⁻¹. The repeatability of 1.1% and reproducibility of 0.14% showed that ID LC–MS–MS is a reliable and reproducible method. The expanded uncertainty for the measurement of progesterone in the CRM was approximately 2.6% within 95% confidence limits. The detection limit of progesterone was approximately 0.6 μg kg⁻¹. The progesterone CRMs were distributed to representative clinical laboratories in the Republic of Korea for comparison with the chemiluminescence immunoassay (CLIA), which is the most sensitive immunoassay method. The results from the comparison showed quite a large bias among the participating laboratories. This implies that the CRM is a very important material for establishment of traceability to its practical use.     

Determination of metals in marine species by microwave digestion and inductively coupled plasma mass spectrometry analysis

A microwave digestion method suitable for determination of multiple elements in marine species was developed, with the use of cold vapor atomic spectrometry for the detection of Hg, and inductively coupled plasma mass spectrometry for all of the other elements. An optimized reagent mixture composed of 2 ml of HNO₃, 2 ml of H₂O₂ and 0.3 ml of HF used in microwave digestion of about 0.15 g (dry weight) of sample was found to give the best overall recoveries of metals in two standard reference materials. In the oyster tissue standard reference material (SRM 1566b), recoveries of Na, Al, K, V, Co, Zn, Se, Sr, Ag, Cd, Ni, and Pb were between 90% and 110%; Mg, Mn, Fe, Cu, As, and Ba recoveries were between 85% and 90%; Hg recovery was 81%; and Ca recovery was 64%. In a dogfish certified reference material (DORM-2), the recoveries of Al, Cr, Mn, Se, and Hg were between 90% and 110%; Ni, Cu, Zn, and As recoveries were about 85%; and Fe recovery was 112%. Method detection limits of the elements were established. Metal concentrations in flounder, scup, and blue crab samples collected from coastal locations around Long Island and in the Hudson River estuary were determined.     

External calibration strategy for trace element quantification in botanical samples by LA-ICP-MS using filter paper

The use of reference solutions dispersed on filter paper discs is proposed for the first time as an external calibration strategy for matrix matching and determination of As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sr, V and Zn in plants by laser ablation-inductively coupled plasma mass spectrometry (LA-ICP-MS). The procedure is based on the use of filter paper discs as support for aqueous reference solutions, which are further evaporated, resulting in solid standards with concentrations up to 250 μg g⁻¹ of each element. The use of filter paper for calibration is proposed as matrix matched standards due to the similarities of this material with botanical samples, regarding to carbon concentration and its distribution through both matrices. These characteristics allowed the use of ¹³C as internal standard (IS) during the analysis by LA-ICP-MS. In this way, parameters as analyte signal normalization with ¹³C, carrier gas flow rate, laser energy, spot size, and calibration range were monitored. The calibration procedure using solution deposition on filter paper discs resulted in precision improvement when ¹³C was used as IS. The method precision was calculated by the analysis of a certified reference material (CRM) of botanical matrix, considering the RSD obtained for 5 line scans and was lower than 20%. Accuracy of LA-ICP-MS determinations were evaluated by analysis of four CRM pellets of botanical composition, as well as by comparison with results obtained by ICP-MS using solution nebulization after microwave assisted digestion. Plant samples of unknown elemental composition were analyzed by the proposed LA method and good agreement were obtained with results of solution analysis. Limits of detection (LOD) established for LA-ICP-MS were obtained by the ablation of 10 lines on the filter paper disc containing 40 μL of 5% HNO₃ (v v⁻¹) as calibration blank. Values ranged from 0.05 to 0.81  μg g⁻¹. Overall, the use of filter paper as support for dried aqueous standards showed to be a useful strategy for calibration and plant analysis by LA-ICP-MS.     

Characterization of Polish rape and honeydew honey according to their mineral contents using ICP-MS and F-AAS/AES

In this work twelve elements (Al, B, Ca, Cr, Cu, Fe, K, Mg, Mn, Na, Ni and Zn) were determined in 30 honey samples from various locations within Poland and in two different types of honey--rape and honeydew. Trace elements (Al, B, Cr, Mn and Ni) were determined by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), however, major elements (Ca, K, Mg, Na) and Cu, Fe, Zn were determined by Flame Atomic Absorption Spectrometry (F-AAS). Cluster analysis of honey data revealed that the origin of honey samples correlated with their chemical composition. It was shown that rape honey includes lower amounts of manganese than honeydew honeys. Also honeydew honey includes much higher concentrations of Al, Cu, K, Fe and Ni in comparison with rape honey. Moreover honeydew honey was found to have a higher mineral content, which reflects sources from which the honey is composed. Trace element analysis showed that the differences in the values found in honey samples could be used as evidence of the quality of honey samples.     

Instrumental neutron activation analysis as a tool for assessing the solubility of soil mineral matter in strong acid

Fifty samples of natural surface soils with high but variable organic matter content were analyzed for 13 elements (Na, Al, K, Sc, V, Cr, Mn, Fe, Co, Zn, Sr, Ba, La) by INAA. The same samples were analyzed for the “total-recoverable” fraction of these elements by ICP-OES after decomposition with 7M HNO₃, and the results are compared. The data are discussed separately for two groups of samples with organic matter contents of respectively >80% and <70%. In the group with < 70 % organic matter the “total-recoverable” fractions show the following sequence (% of total): Co (83)>Mn (77)>La (60)>Fe=Zn (53)>V (33)>Cr (29)>Sc (25)>Al=Ba (17)>Sr (13)>K (5)>Na (2). The results are in good agreement with corresponding literature data for mineral soils in the case of Al, K, Sc, V, Cr, Fe, and La. In the case of Na, Mn, Co, Zn, Sr, and Ba the present surface soils showed significantly higher “total-recoverable” fractions than the previously studied subsoils. Possible reasons for these differences are discussed. INAA remains a convenient reference technique for determination of total concentrations with the rapidly increasing use of strong mineral acids in environmental studies of elements. This revised version was published online in July 2006 with corrections to the Cover Date.     

Rapid screening of amitraz and its metabolite residues in honey using a quick,easy, cheap,effective, rugged,and safe extraction method coupled with UHPLC and Q Exactive

A method for determining amitraz and 2,4‐dimethylaniline in honey was established by using ultra‐high‐performance liquid chromatoghaphy and Q Exactive after applying quick, easy, cheap, effective, rugged, and safe extracting process. A suitable extraction method was designed to extract the amitraz and 2,4‐dimethylaniline after a suitable amount of honey samples was dissolved. A Thermo Syncronis C₁₈ column (100 × 2.1 mm, 1.7 μm) was used for chromatographic separation of the samples. Then the two compounds were quantitatively analyzed via a program of Q Exactive. The linearity of amitraz and 2,4‐dimethylaniline was good in the concentration range of 0.5–100 μg/L, and the correlation coefficient R² was >0.99. The average recovery and relative standard deviation of each component were 81.3–90.0% and 5.1–7.2%. The 24‐ and 48‐h test results showed that the sample needed to be tested within 24 h. The limit of detection was 0.1 μg/kg for amitraz and 2,4‐dimethylaniline, whereas for both the limit of quantitation was 0.3 μg/kg.     

Application of the INAA methods for KRISS infant formula CRM analysis: standardization of INAA at KRISS

We have established an instrumental neutron activation analysis (INAA) method, including k₀-based INAA, at the Korea Research Institute of Standards and Science (KRISS) for the certification of reference materials. As part of establishing INAA measurements, KRISS infant formula certified reference material was analysed for multiple elements at three different metrological institutes: KRISS and NIST for the standard comparator method, and JSI for the k₀-INAA method. The mass fraction of most elements was consistent within expanded uncertainty (k?=?2). In addition, the results were used to verify the validity of elemental analysis of Zn using the standard comparator INAA at KRISS, and spreadsheet-based INAA calculations were evaluated.

     

The Intermetallic Type-I Clathrate Na8Zn4Ge42

The new intermetallic type-I clathrate Na₈Zn₄Ge₄₂ was obtained by direct reaction of the elements, and its crystal structure was determined by means of single-crystal X-ray diffraction methods. The structure is described in space group Pm3 n (no. 223) with a = 10.6982(1) Å. A mixed Zn/Ge occupancy is found for one of the network sites (6c). Na₈Zn₄Ge₄₂ represents an air-stable electron-precise Zintl phase with exclusively Na cations located in the cavities of a polyanionic host network of four-connected Zn and Ge atoms.     

Analysis of undigested honey samples by isotope dilution inductively coupled plasma mass spectrometry with direct injection nebulization (ID-ICP-MS)

Undigested honey samples were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) using direct injection nebulization (DIN). Samples were diluted 25-fold using dilute HNO₃ to which Triton X-100 was added. Isotope dilution (ID) was used to quantify Ba, Cu, Pb and Zn in these natural matrix samples. DIN parameters were optimized to obtain a stable transient signal enough to determine multiple isotope ratios. The Ba, Cu and Zn isotope ratios were measured in a single sample injection of 50 μl diluted honey and the Pb isotopes in a separate injection. The analysis was characterized by precisions given by R.S.D. values from 0.20 to 1.24% for Ba, 0.49–1.23% for Cu, 0.61–2.28% for Pb and 0.50–1.51% for Zn. The results were in agreement, at the 95% confidence level, with those obtained by analyzing digested samples using external calibration. Using this direct method, 30 real honey samples per hour could be analyzed.     

Dry-Ashing Preconcentration for Micro-Reactor-Based Neutron Activation Analysis of Food and Plant Samples

The application of preconcentration by dry-ashing to the neutron activation analysis of biological samples using a SLOWPOKE-2 low-power reactor is reported. Samples of selected food crops (banana, callaloo, carrot, mango, and yam) and bioindicator plants (lichen, moss, Tillandsia sp., and tree bark) were analysed both as plant tissue, and as ashed sample. The results are presented for 21 elements. Good agreement between both procedures (<10% relative standard error) was obtained for 13 elements: Al, Ca, Cd, Cr, Fe, K, La, Mg, Mn, Na, Sm, Ti, and V. For Dy, Rb, and Zn the agreement was 10-15%. Relatively poorer agreement (>15-30%) was obtained for As, Br, Cl, and Sb. Dry ashing produced improved analytical results for those samples that were of low ash content. However, the increased background counts observed in ashed samples can sometimes negate the concentration gain, particularly in plants with high ash contents but low levels of certain elements.     

Honey from Luso region (Portugal): Physicochemical characteristics and mineral contents

This work was conducted to evaluate the quality of 38 honey samples from Luso region (Portugal), and to study the relation between Eucalyptus pollen and chemical properties of honey. Mean values obtained for physicochemical parameters were: pH 3.83; 16.65% moisture; 80.7 °Brix sugar; 0.35% ash; 419.6 μS cm^− 1 electrical conductivity; 21.5 meq/kg free acidity; 9.6 meq/kg lactonic acidity; 31.2 meq/kg total acidity; 9.41 mg/kg HMF and 18.3° Gothe diastase activity. The mineral content was determined by atomic absorption spectrometry, and in the analysed samples, potassium was the major element, being magnesium the minor one. Mean values obtained were (mg/kg): Ca, 59.88; K, 1150.10; Mg, 35.57; Na, 261.43. Among the overall determined parameters, only Mg, ash and electrical conductivity were influenced by the presence of Eucalyptus pollen in the honey samples: the values obtained for Mg, ash and electrical conductivity in multifloral honey without Eucalyptus were lower than those of either monofloral or multifloral honey with Eucalyptus. The results obtained for physicochemical characteristics of Luso honey indicate a good quality level, adequate processing, good maturity and freshness.     

Characterisation of some exotic fruits (Morus nigra, Morus alba, Salvadora persica and Carissa opaca) used as herbal medicines by neutron activation analysis and estimation of their nutritional value

In the under developed countries, the people of far-flung rural areas still depend to a large extent upon herbal medicines. At the foundation of usage of herbal medicine is the experience of thousands of years. The present paper deals with the characterisation of exotic fruits for essential and toxic elements. The samples include Morus nigra, Morus alba, Salvadora persica and Carissa opaca (from low and high altitude). Two standardizations of neutron activation analysis, that is, semi-absolute k ₀-instrumental neutron activation analysis (k ₀-INAA) and epithermal neutron activation analysis (ENAA) were employed for the quantification of elements. The analysis methodologies were validated by analyzing the IAEA-336 (lichen) and NIST-SRM-1572 (citrus leaves). Sixteen elements including Br, Ca, Cl, Co, Cr, Fe, I, K, Mg, Mn, Na, Rb, Sb, Sc Sr, and Zn were determined in all samples. Daily intakes of various elements from the samples were measured and compared with the dietary reference intakes. Additionally, principal component analysis was performed to extract information regarding samples and elements.     

Elemental analysis of topaz from northern areas of Pakistan and assessment of induced radioactivity level after neutron irradiation for color induction

To study the impurity elements, which render color-induced topaz long lived radionuclides, three samples of topaz, from three different cities of the Northern Pakistan (Baltistan, Gilgit and Mardan) were analyzed using k ₀ instrumental neutron activation analysis (k ₀-INAA). The samples were irradiated in Pakistan Research Reactor-1 (PARR-1) and PARR-2 at Pakistan Institute of Nuclear Science & Technology (PINSTECH), Islamabad. The method was validated by analyzing IAEA-S7 reference material. In three samples a total of 22 trace level impurity elements were quantified. Among impurities, 10 elements including As, Ce, Ga, Ge, La, Na, Sb, Sc, U and Zn were common in topaz of all the three places. The storage time has been calculated for each sample required to bring the induced radioactivity down to permissible level given by US National Regulatory Commission.     

Tetracycline residues in royal jelly and honey by liquid chromatography tandem mass spectrometry: validation study according to Commission Decision 2002/657/EC

A specific, sensitive and robust liquid chromatography tandem mass spectrometry method for determining oxytetracycline, tetracycline, chlortetracycline and doxycycline in royal jelly and honey samples is presented. Extraction of drug residues was performed by ammonium acetate buffer as extractant followed by a clean-up with metal chelate affinity chromatography and solid-phase extraction. Tetracycline analysis was performed using liquid chromatography–electrospray ionisation–tandem mass spectrometry. The presented method is the first validated for royal jelly and in accordance with the requirements set by Commission Decision 2002/657/EC. Recoveries of the methods, calculated spiking the samples at 5.0, 10.0, 20.0 and 30.0 μg kg⁻¹, were 79% to 90% for honey and 77% to 90% for royal jelly. The intra-day precision (RSD) ranged between 8.1% and 15.0% for honey and from 9.1% to 16.3% for royal jelly, while inter-day precision values were from 10.2% to 17.6% and from 10.6% to 18.4% respectively for honey and royal jelly. Linearity for the four analytes was calculated from 5.0 to 50.0 μg kg⁻¹. The decision limits (CCα) ranged from 6.2 to 6.4 μg kg⁻¹ and from 6.1 to 6.5 μg kg⁻¹ for honey and royal jelly, respectively. Detection capabilities values (CCβ) ranged between 7.2 and 7.7 μg kg⁻¹ and from 7.3 to 7.9 μg kg⁻¹ respectively for honey and royal jelly. The developed method is currently in use for confirmation of the official control analysis of honey and royal jelly samples.     

Closed-vessel microwave digestion technique for lichens and leaves prior to determination of trace elements (Pb,Zn, Cu) and stable Pb isotope ratios

A reliable and robust procedure using closed-vessel microwave digestion of lichens and leaves for precise and accurate determination of trace elements (Pb, Zn and Cu) and stable Pb isotope ratios is presented. The method was developed using certified reference material CRM 482 Pseudovernia furfurea (Lichens), NIST 1515 (Apple Leaves) and NIST 1547 (Peach Leaves) and tested on lichens from a mining site in Russia. A mixture of 3?mL of HNO₃, 3?mL of H₂O₂, 2?mL of H₂O and 0.8?mL of HF ensured complete sample dissolution with 100?±?5% recovery for Pb, Zn and Cu at a maximum temperature of 210°C and pressure of 350?psi. The amount of HF and microwave pressure significantly influenced Pb, Zn and Cu recovery. Comparison between EMMA-XRF and ICP-AES showed a good correlation between Pb, Zn and Cu concentrations. Using the newly developed digestion method, Pb isotopes in lichens from the mining site were determined with an internal precision better than 0.02%.     

INAA and PIXE for the determination of the contents of extractable sediment

The three-stage BCR sequential step reference extraction procedure was applied to the reference material BCR CRM 601, especially developed for fractionation studies. Extracted fractions were analyzed for Cr, Ni, Zn, Cd, and Pb, by k ₀-standardized instrumental neutron activation (k ₀ INAA) and proton induced X-ray emission (PIXE), and flame atomic absorption spectrometry (FAAS). Sample preparation procedures were developed for both k ₀ INAA and PIXE techniques, related to the evaporation of the solutions in order to get solid samples for neutron and proton irradiation. Quality control was assessed by intercomparison of the analytical results obtained by the applied techniques, which included results for a few certified reference materials. In the extracted fractions, chromium concentration was not determined accurately by both nuclear techniques. Concerning Cd, Ni, Pb, and Zn, the results were in general in good agreement with the certified values and FAAS. Some incomplete separation of the residue might have occurred.     

The validation of Kayzero-assisted NAA in Budapest, Řež, and Ljubljana via the analysis of three BCR certified reference materials

After installation and calibration of k₀-assisted NAA in three Central European research institutes (AEKI-Budapest, NPI-?e?, and IJS, Ljubljana), its validation was established via the analysis of three BCR certified reference materials. The matrices of choice were: CRM 277 estuarine sediment, CRM 038 coal fly ash from pulverized coal, and CRM 101 spruce needles. For some elements, e.g. Zn, Cd, and Hg, the analyses were not only performed instrumentally (INAA), but also in the radiochemical mode (RNAA). The work was performed in the framework of a European Copernicus Project.     

Certification of reference materials for the quality control of major element determinations in groundwater Part 2: Certification

The quality control of groundwater monitoring requires the availability of representative CRMs. This paper describes the preparation of two artificial groundwater reference materials, CRM 616 (high carbonate content) and CRM 617 (low carbonate content), the homogeneity and stability studies and the analytical work performed for the certification of a range of major elements (Ca, Cl, Fe, K, Mg, Mn, Na, NO₃, PO₄ and SO₄).