Stoichiometry and stability of cellulose-hydrazine complexes

Highly crystalline cellulose samples from green algae (cellulose I) and mercerized ramie (cellulose II) were treated with anhydrous hydrazine and the resulting complexes were analyzed by synchrotron X-ray diffraction and thermogravimetry. Cellulose I-hydrazine complex could be fully described by a two-chain monoclinic unit cell, a = 0.879 nm, b = 1.076 nm, c = 1.038 nm, and γ = 122.0°, with space group P2₁. Cellulose II-hydrazine complex prepared from mercerized ramie gave a different two-chain monoclinic unit cell, a = 1.042 nm, b = 1.046 nm, c = 1.038 nm, γ = 129.7°, also with space group P2₁. Though having different crystal structures, the number of hydrazine molecules per glucopyranoside residue was 0.82 for cellulose I-complex and 0.93 for cellulose II-complex, probable stoichiometric value of 1.0. Hydrazine could be extracted from the complexes by organic solvents retaining the crystalline orders, resulting in the allomorphic conversion to cellulose III_I and cellulose III_II, both having non-staggered chain arrangements. These features are similar to those of cellulose-ethylenediamine complexes.     

Cellulose/chitosan composites prepared in ethylene diamine/potassium thiocyanate for adsorption of heavy metal ions

Cellulose/chitosan composites were successfully prepared in a new and basic-based solvent system, ethylene diamine/potassium thiocyanate (EDA/KSCN), by dissolving cellulose and chitosan in 70/30 (w/w) EDA/KSCN at ?19 °C, and then coagulating in methanol. Wide angle X-ray diffraction studies revealed that the EDA/KSCN solvent system is capable of disrupting the hydrogen bonds in both cellulose and chitosan and increase the amorphous regions. Stability tests proved that the composites are stable in acidic aqueous solution due to the hydrogen bonds formed between cellulose and chitosan. This is the first time to dissolve chitosan in a basic-based solvent system and prepare cellulose/chitosan composites in a straightforward way. The adsorption of heavy metal ions (Cu²⁺, Cd²⁺, and Pb²⁺) onto the cellulose/chitosan composites was investigated. The adsorption capacity is highly dependent on pH and the maximum metal uptake was obtained at pH 5.0. Increasing initial metal concentration enhanced the diffusion of metal ions to the composite surface and therefore the metal removal efficiency. Higher percentage of chitosan in the composites also led to higher metal adsorption. The results indicated that the prepared cellulose/chitosan (1:1) composite can adsorb 0.53 mmol/g Cu²⁺, 0.28 mmol/g Cd²⁺ and 0.16 mmol/g Pb²⁺ ions at pH 5.0. The Freundlich model and the pseudo-second-order model were in good agreement with the adsorption isotherms and kinetics, respectively. X-ray photoelectron spectroscopy studies indicated that the binding of heavy metal ions is attributed to the nitrogen atoms of amino groups in chitosan. The composites can be reused for metal removal.     

Dissolving of cellulose in PEG/NaOH aqueous solution

Here, a new solvent system for cellulose is reported. The solvent is a mixed aqueous solution of 1.0 wt.% poly(ethylene glycol) (PEG) and 9.0 wt.% of NaOH. Cellulose powder was added into the mixture at room temperature at first, and freezing it at −15 °C for 12 h following a thaw of the mixture at room temperature under strong stirring. There formed a clean solution of cellulose, and the optical microscopy was used to record the dissolving process. ¹³C-NMR, FT-IR, XRD, and intrinsic viscosity measurements revealed that there forms a homogeneous solution of cellulose in the new solvent system. The maximum solubility of cellulose with average molecular weight of 1.32 × 10⁵ g mol⁻¹ in the solvent system is 13 wt.%. The cellulose solution in the new solvent system is stable, even for 30 days storage at room temperature.     

Extended ensemble molecular dynamics study of cellulose I–ethylenediamine complex crystal models: atomistic picture of desorption behaviors of ethylenediamine

Cellulose - Cellulose I crystals swell on exposure to ethylenediamine (EDA) molecules to form a cellulose I–EDA complex, and successive extraction of EDA molecules converts the complex...     

Preparation and characterization of cellulose β-ketoesters prepared by homogeneous reaction with alkylketene dimers: comparison with cellulose/fatty acid esters

Cellulose was dissolved in lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI), and reacted with alkylketene dimers (AKDs) under non-aqueous and homogeneous conditions to prepare cellulose/AKD β-ketoesters with high degrees of substitution (DS). Six AKDs synthesized from octanoic, decanoic, dodecanoic, tetradecanoic, hexadecanoic and octadecanoic acids via their fatty acid chlorides were used in this study. The cellulose/AKD β-ketoesters obtained were gummy solid at room temperature, and had DS values ranging from 1.9 to 2.9. Cellulose/fatty acid esters with DS 2.5–2.9 were also prepared as references. ¹³C-NMR spectra of the cellulose/AKD β-ketoesters showed that cellulose carbons and substituent carbons close to cellulose chains were restricted in motion and behaved like solid in solutions. In contrast, the cellulose/fatty acid esters did not demonstrate such anomalous ¹³C-NMR spectra. The unique ¹³C-NMR patterns are characteristic for the cellulose/AKD β-ketoesters, which have long and branched alkyl substituents in each anhydroglucose unit. Size-exclusion chromatography furnished with multi-angle laser light scattering (SEC-MALLS) revealed, on the other hand, that all cellulose/AKD β-ketoesters and cellulose/fatty acid esters prepared had flexible or random-coil conformations in tetrahydrofuran (THF). There were no clear differences in conformation or stiffness of cellulose chains between cellulose/AKD β-ketoesters and cellulose/fatty acid esters.     

Cellulose II nanoelements prepared from fully mercerized, partially mercerized and regenerated celluloses by 4-acetamido-TEMPO/NaClO/NaClO2 oxidation

A softwood bleached kraft pulp (SBKP) and cotton lint cellulose were fully or partially mercerized, and these along with celluloses and commercially available regenerated cellulose fiber and beads were oxidized by 4-acetamido-TEMPO/NaClO/NaClO₂ at 60 °C and pH 4.8. Weight recovery ratios and carboxylate contents of the oxidized celluloses were 65–80% and 1.8–2.2 mmol g⁻¹, respectively. Transparent and viscous dispersions were obtained by mechanical disintegration of the TEMPO-oxidized celluloses in water. These aqueous dispersions showed birefringence between cross-polarizers, indicating that mostly individualized cellulose nanoelements dispersed in water were obtained by these procedures. Transmission electron microscopy observation showed that the cellulose nanoelements prepared from mercerized SBKP, repeatedly mercerized SBKP, mercerized cotton lint cellulose, regenerated cellulose beads and 18% NaOH-treated SBKP, i.e. partially mercerized SBKP, had similar morphologies and sizes, 4–12 nm in width and 100–200 nm in length. The 18% NaOH-treated SBKP was converted to cellulose nanoelements consisting of both celluloses I and II.     

Properties of cellulose films prepared from NaOH/urea/zincate aqueous solution at low temperature

Cellulose films were successfully prepared from NaOH/urea/zincate aqueous solution pre-cooled to −13 °C by coagulating with 5% H₂SO₄. The cellulose solution and regenerated cellulose films were characterized with dynamic rheology, ultraviolet–visible spectroscope, scanning electron microscopy, wide angle X-ray diffraction, Fourier transform infrared (FT-IR) spectrometer, thermogravimetry and tensile testing. The results indicated that at higher temperature (above 65 °C) or lower temperature (below −10 °C) or for longer storage time, gels could form in the cellulose dope. However, the cellulose solution remained a liquid state for a long time at 0–10 °C. Moreover, there was an irreversible gelation in the cellulose solution system. The films with cellulose II exhibited better optical transmittance, high thermal stability and tensile strength than that prepared by NaOH/urea aqueous solution without zincate. Therefore, the addition of zincate in the NaOH/urea aqueous system could enhance the cellulose solubility and improve the structure and properties of the regenerated cellulose films.     

The role of salt on cellulose dissolution in ethylene diamine/salt solvent systems

Ethylene diamine (EDA)/salt solvent systems can dissolve cellulose without any pretreatment. A comparison of the electrical conductivity of different salts in EDA was made at 25 °C, and conductivity decreased in the order of KSCN>KI>NaSCN at the same molar concentration. Among the salts tested, potassium thiocyanate (KSCN) was capable of dissolving both high molecular weight (DP>1000) and low molecular weight (DP = 210) cellulose, and this was confirmed by polarized light microscopy. ³⁹K and ¹⁴N NMR experiments were conducted at 70 °C as a function of cellobiose concentration with EDA/KSCN as the solvent. The results showed that the K⁺ ion interacts with cellobiose more than the SCN⁻ ion does. Recovered cellulose was studied by infrared spectroscopy (FTIR) and wide angle X-ray diffraction (WAXD). Changes in the FTIR absorption bands at 1,430 and 1,317 cm⁻¹ were associated with a change in the conformation of the C-6CH₂OH group. The changes in positions and/or intensities of absorption bands at 2,900, 1,163, and 8,97cm⁻¹ were related to the breaking of hydrogen bonds in cellulose. X-ray diffraction studies revealed that cellulose, recovered by precipitating cellulose solutions with water, underwent a polymorphic transformation from cellulose I to cellulose II.     

On the nanostructure of micrometer-sized cellulose beads

The analysis of the porosity of materials is an important and challenging field in analytical chemistry. The gas adsorption and mercury intrusion methods are the most established techniques for quantification of specific surface areas, but unfortunately, dry materials are mandatory for their applicability. All porous materials that contain water and other solvents in their functional state must be dried before analysis. In this process, care has to be taken since the removal of solvent bears the risk of an incalculable alteration of the pore structure, especially for soft materials. In the present paper, we report on the use of small-angle X-ray scattering (SAXS) as an alternative analysis method for the investigation of the micro and mesopores within cellulose beads in their native, i.e., water-swollen state; in this context, they represent a typical soft material. We show that even gentle removal of the bound water reduces the specific surface area dramatically from 161 to 109 m² g⁻¹ in cellulose bead sample type MT50 and from 417 to 220 m² g⁻¹ in MT100. Simulation of the SAXS curves with a bimodal pore size distribution model reveals that the smallest pores with radii up to 10 nm are greatly affected by drying, whereas pores with sizes in the range of 10 to 70 nm are barely affected. The SAXS results were compared with Brunauer–Emmett–Teller results from nitrogen sorption measurements and with mercury intrusion experiments.     

Effects of crosslinking ratio and aging time on properties of physical and chemical cellulose gels via 1-butyl-3-methylimidazolium chloride solvent

Papers used in the field of electro-responsive applications are known as Electroactive-papers (EAPaps), consisting primarily of a cellulose. 1-Butyl-3-methylimidazolium chloride is an interesting ionic liquid that acts as an effective cellulose solvent for EAPaps due to its high solubility without chain derivatization, less chain degradation, and stability in electro-responsive applications. In our work, physical and chemical cellulose gels were fabricated and studied for the effects of various crosslinking ratios (CR) and aging time (t_ag), with glutaraldehyde acting as the crosslinking agent. The crosslinking reaction conversion could be increased by increasing the CR and t_ag; the reaction products were ketone linkages and by-product water molecules. A difference in optical properties could be observed and related to the differing amounts of ketone linkages, as confirmed by FTIR-ATR quantitative analysis. UV–visible spectra showed that the prepared samples had a maximum wavelength λ_max nm, a characteristic of ketone linkages. By-product water molecules exhibited plasticizing effects, as observed by the decrease in the storage moduli (G′) at 1 day aging time. The outward migration of by-product water molecules caused a slight increase in G′ at 15 days aging time due to a closer packing. The by-product water molecules induced the H⁺-hopping and more disordered domains resulting in an ease in ion migration. Our paper-gels showed potential characteristics towards electro-responsive applications: less preparation time (<14 h) and stable gel properties.     

Isolation and characterization of nanocrystalline cellulose from flaxseed Hull: A future onco-drug delivery agent

Cellulose is a polysaccharide composed of D-glucopyranose linked by 1,4 β-glycoside bond with three hydroxyl groups. These hydroxyl groups in cellulose have an important role in the compactness of crystalline structure and in determining the physical properties of cellulose. Cellulose in nanometers size range from 10 nm to 350 nm is known as nano cellulose, which has a variety of applications due to the unique properties such as low density, biodegradable, and good mechanical properties. In the present study, we present the isolation of the nano cellulose from flaxseed hull for the first time. The isolated nano cellulose was characterized by techniques such as UV–Vis, FT-IR, BET, XRD SEM, and TEM. The nano cellulose obtained was found to be crystalline in nature with a crystallinity index of 46% and the surface area of 5 cm²/g with excellent thermal stability.     

Formation of Aromatic and Other Unsaturated End Groups in Carboxymethyl Cellulose During Hot Alkaline Treatment

Carboxymethyl cellulose (CMC, DS 0.58) was treated in solutions of sodium hydroxide (0.001–1 M) at 95 °C. The treated (1–12 h) CMC samples were purified by dialysis and analyzed by UV spectroscopy and by UV resonance Raman spectroscopy (UVRRS) with excitation at 244 nm. A UV absorption maximum at 265 nm and a UVRR signal at 1650 cm⁻¹ were indicative of formation of -conjugated aldehyde end groups in CMC through -elimination. Another strong UVRR band at 1610 cm⁻¹ gave evidence on conversion of some of the -conjugated aldehyde end groups to alkali stable aromatic structures.     

Highly C6-selective and quantitative modification of cellulose: nucleoside-appended celluloses to solubilize single walled carbon nanotubes

Cellulose derivatives having thymidine and/or trimethylammonium appendages exclusively at C6 positions can be prepared in a convenient manner through C6-selective bromination/azidation on cellulose to afford 6-azido-6-deoxycellulose followed by chemoselective [3 + 2] cycloadditions using Cu⁺ as a catalyst. These cellulose derivatives take unique sheet-like structures and function as “wrapping papers” to effectively disperse single-walled carbon nanotubes in water.     

Synthesis of CeO<Subscript>2</Subscript> or α–Mn<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles via sol–gel process and their optical properties

Nanocrystalline cubic fluorite/bixbyite CeO₂ or α–Mn₂O₃ has been successfully synthesized by using methanol as a solvent via sol–gel method calcined at 400 °C. The obtained products were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), UV–vis absorption and Photoluminescence (PL) spectroscopy. TEM reveals that the as-synthesized ultra-fine samples consist of elliptical/spherical and sheet-like morphology of crystalline particles of 8/30 nm, which are weakly aggregated. Optical absorbance spectra reveal that the absorption of ceria in the UV region originates from the charge- transfer transition between the O²⁻ (2p) and Ce⁴⁺ (4f) orbit in CeO₂. However, α–Mn₂O₃ nanostructures with nearly pure band gap emission should be of importance for their applications as UV emitters.     

The dissolution of cellulose in NaOH-based aqueous system by two-step process

A new dissolution method, a two-step process, for cellulose in NaOH/urea aqueous system was investigated with ¹³C NMR, wide X-ray diffraction (WXRD), and solubility test. The two steps were as follows: (1) formation and swelling of a cellulose–NaOH complex and (2) dissolution of the cellulose–NaOH complex in aqueous urea solution. The dissolution mechanism could be described as strong interaction between cellulose and NaOH occurring in the aqueous system to disrupt the chain packing of original cellulose through the formation of new hydrogen bonds between cellulose and NaOH hydrates, and surrounding the cellulose–NaOH complex with urea hydrates to reduce the aggregation of the cellulose molecules. This leads to the improvement in solubility of the polymer and stability of the cellulose solutions. By using this two-step process, cellulose can be dissolved at 0–5 °C in contrast to the known process that requires −12 °C. Regenerated cellulose (RC) films with good mechanical properties and excellent optical transmittance were prepared successfully from the cellulose solution.     

The europium/samarium-2-benzoyl-indane-1,3-dione-cetyltrimethylammonium bromide fluorescence system and its analytical application

The fluorescence system of the Eu³⁺ (or/and Sm³⁺)-2-benzoyl-indane-1,3-dione(BID)-cetyltrimethylammonium bromide (CTMAB) was investigated at excitation wavelengths of 350 nm, and emission wavelengths at 612 nm for europium and 565, 606 and 650 nm for samarium, respectively. The system was used for the determination of Eu and Sm in rare earth oxides and of BID in water. Europium or/and samarium could be determined in the range of 1.0 × 10^–9–1.0 × 10^–5 mol/L and 2.0 × 10^–8–5.0 × 10^–5 mol/L, respectively; 1.0 × 10^–6–2.0 × 10^–5 mol/L of BID could also be determined. Received: 5 March 1997 / Revised: 6 August 1997 / Accepted: 20 September 1997     

Effects of a non-ionic surfactant,Tween 20, on adsorption/desorption of saccharification enzymes onto/from lignocelluloses and saccharification rate

In this work, we examined the role of a non-ionic surfactant, Tween 20, on enzymatic hydrolysis of lignocelluloses. Delignified lignocelluloses (pine wood chip) were used as model substrates. Effects of Tween 20 on adsorption/desorption onto/from lignocelluloses with and without hydrolysis were evaluated respectively. Tween 20 lowered the non-biospecific adsorption of β-glucosidase and enhanced the bio-specific adsorption of cellulase. Tween 20 did not affect the liquid phase reaction (cellobiose hydrolysis). However, for the solid surface reaction (cellulose hydrolysis), cellulose conversion for 72 hrs was increased 9–21% and 1–8.5% for samples with high lignin contents (PI) and low lignin contents (PIII) by injection of Tween 20 (0.024–0.24 mM), respectively. Moreover, Tween 20 increased the cellulose conversion rate substantially. It is suggested that the increase of cellulase amount adsorbed due to the increase of effective cellulose surface by Tween 20 contribute to the enhancement of cellulose conversion.     

Construction of inorganic nanoparticles by micro-nano-porous structure of cellulose matrix

In our previous work, the CdS nanoparticles/cellulose films exhibited significantly high photocatalytic H₂ production efficiency under visible light irradiation than the ordinary CdS photocatalyst. In present paper, the CdS nanoparticles were synthesized in situ in pores of the regenerated cellulose substrate and the porous structure of cellulose, formation of the CdS nanoparticles and interactions between CdS and cellulose matrix in the composite films were investigated deeply. The experimental results indicated that the micro-nano-porous structure of the cellulose matrix could be used easily to create inorganic nanoparticles, which supplied not only cavities for the formation of nanoparticles, but also a shell (semi-stiff cellulose molecules support the pore wall) to protect their nano-structure. When the cellulose films with porous structure at wet state were immersed into inorganic ions solution, the ions interacted immediately with the –OH groups of cellulose, and then transformed into inorganic composite via another treatment, finally inorganic nanoparticles formed during the dry. The pore size of the cellulose matrix decreased from 180 nm (at wet state) to about 18 nm (at dry state), leading to the formation of nanoparticles. The results revealed that the CdS nanoparticles with a mean particle diameter about 6 nm were dispersed well, and were immobilized tightly in the cellulose matrix, resulting in a portable photocatalyst with high efficiency for photocatalytic for H₂ evolution. This is simple and “green” pathway to prepare the organic–inorganic hybrid materials.     

Surfactant assisted preparation and characterization of carboxymethyl cellulose Sn(IV) phosphate composite nano-rod like cation exchanger

Carboxymethyl cellulose Sn(IV) phosphate composite nano-rod like cation exchanger with diameter in the range of 20–40 nm, length in the range of 100–150 μm and particle size in the range of 21–38 nm have been successfully prepared by surfactant assisted sol–gel method. Scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, fourier transform infra red spectroscopy and thermogravimetric analysis-differential thermal analysis studies were carried out to study the structure and morphology of this composite nano-rod like cation exchanger. Freundlich adsorption isotherm is well fitted for the adsorption of pyridine on the surface of this composite nano-rod like cation exchanger. The thermodynamic parameters such as Freundlich constant, thermodynamic equilibrium constant (K ₀), standard free energy changes (ΔG ⁰), standard enthalpy changes (ΔH ⁰) and standard entropy changes (ΔS ⁰) have been evaluated. These parameters indicated that the adsorption of pyridine on the surface of composite nano-rod like cation exchanger was feasible, spontaneous and exothermic in nature which suggests for the potential application of pyridine removal from water.     

The europium/samarium-2-benzoyl-indane-1,3-dione-cetyltrimethylammonium bromide fluorescence system and its analytical application

The fluorescence system of the Eu³⁺ (or/and Sm³⁺)-2-benzoyl-indane-1,3-dione(BID)-cetyltrimethylammonium bromide (CTMAB) was investigated at excitation wavelengths of 350 nm, and emission wavelengths at 612 nm for europium and 565, 606 and 650 nm for samarium, respectively. The system was used for the determination of Eu and Sm in rare earth oxides and of BID in water. Europium or/and samarium could be determined in the range of 1.0 × 10^–9–1.0 × 10^–5 mol/L and 2.0 × 10^–8–5.0 × 10^–5 mol/L, respectively; 1.0 × 10^–6–2.0 × 10^–5 mol/L of BID could also be determined. Received: 5 March 1997 / Revised: 6 August 1997 / Accepted: 20 September 1997