Simultaneous determination of dapsone and pyrimethamine by derivative spectrophotometry in pharmaceutical formulations

A simple and fast method was developed for the simultaneous determination of dapsone and pyrimethamine by first-order digital derivative spectrophotometry. Acetonitrile was used as a solvent to extract the drugs from the pharmaceutical formulations, and the samples were subsequently evaluated directly by digital derivative spectrophotometry. The simultaneous determination of both drugs was performed by the zero-crossing method at 249.4 and 231.4 nm for dapsone and pyrimethamine, respectively. The best signal-to-noise ratio was obtained when the first derivative of the spectrum was used. The linear range of determination for the drugs was from 6.6 x 10(-7) to 2.0 x 10(-4) and from 2.5 x 10(-6) to 2.0 x 10(-4) mol/L for dapsone and pyrimethamine, respectively. The excipients of commercial pharmaceutical formulations did not interfere in the analysis. Chemical and spectral variables were optimized for determination of both analytes. A good level of repeatability, 0.6 and 1.7% for dapsone and pyrimethamine, respectively, was observed. The proposed method was applied for the simultaneous determination of both drugs in pharmaceutical formulations.     

Simultaneous determination of N-butylscopolamine and oxazepam in pharmaceutical formulations by first-order digital derivative spectrophotometry

A simple method has been developed for the simultaneous determination of N-butylscopolamine bromide and oxazepam in pharmaceutical formulations using first-order digital derivative spectrophotometry. Acetonitrile was selected as the solvent in which both compounds showed well-defined bands. Both analytes showed good stability in this solvent when solutions of the analytes were exposed to light and temperatures between 20 degrees and 80 degrees C. The simultaneous determination of both drugs was performed by the zero-crossing method at 226.0 and 257.0 nm for N-butylscopolamine and oxazepam, respectively. The linear range of determination was found to be 2.5 x 10(-7) to 8.0 x 10(-5) mol/L for N-butylscopolamine and 7.1 x 10(-8) to 8.0 x 10(-5) mol/L for oxazepam. A very good level of repeatability (relative standard deviation) of 0.2% was observed for N-butylscopolamine and oxazepam. The ingredients commonly found in pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in pharmaceutical formulations (capsules).     

Simultaneous determination of propacetamol and paracetamol by derivative spectrophotometry

The present paper describes a procedure that phenols in air were preconcentrated in a membrane cell and their content was determined by adsorptive polarography. First, the phenols in air samples were preconcentrated in a membrane cell using 2.0 M NaOH solution, then in a pH 1.3 buffer solution p-bromophenylamine forms a diazoate with NaNO(2), and into the mixture the collected phenols were added to form azo-compound in a pH 13 buffer solution. The azo-compound can be adsorbed at the mercury electrode and yields a sensitive oscillopolarographic wave. Over the range 2.0x10(-8)-2.0x10(-5) M, the peak currents are linearly proportional to the concentration of phenols. The detection limit is 5.0x10(-9) M.     

Simultaneous determination of pseudoephedrine sulfate, dexbrompheniramine maleate and loratadine in pharmaceutical preparations using derivative spectrophotometry and ratio spectra derivative spectrophotometry

Two new spectrophotometric methods are described for the simultaneous analysis of pseudoephedrine sulfate-dexbrompheniramine maleate (DBP) and pseudoephedrine sulfate-loratadine combinations. In the first, derivative spectrophotometry, dA/dlambda values were read at zero-crossing points. In the second, ratio spectra derivative spectrophotometry, analytical signals were measured at the wavelengths corresponding to either maxima or minima for these drugs in the first derivative spectra of their ratio spectra. The procedures do not require any separation step. Mean recoveries were found to be >99% in the methods for these compounds in their synthetic mixtures. All the spectrophotometric methods proposed were compared with each other and HPLC which was also developed by us and applied to the pharmaceutical preparations selected.     

Simultaneous determination of chlorophyll a and chlorophyll b by derivative spectrophotometry

Chlorophyll a (Chl a) and chlorophyll b (Chl b) plant pigments, which are important in the food industry and are beneficial as environmental pollution indicators, have been extracted with a novel solvent mixture (1:1 v/v acetone–propanol) not containing chloroform and simultaneously determined by first-derivative spectrophotometry. The results were statistically compared to those obtained by the ordinary absorption spectrophotometric reference utilizing the principle of additivity of absorbances. The testing of the developed method in synthetic mixtures of Chl a and Chl b and in real plant material samples (grass, spinach, chard, purslane, black cabbage, crisp lettuce, rocket, dill and seaweed) proved successful in that the developed extractive derivative spectrophotometric method was both rapid and precise, and was not dependent on the Chl a/b ratio in contrast to the reference method which was adversely affected by the latter parameter.     

Simultaneous determination of tartrazine and sunset yellow by derivative spectrophotometry and ratio spectra derivative

Two methods for determining Tartrazine and Sunset Yellow in mixtures by first derivative spectrophotometry and by first derivative of the ratio spectra are described. The procedures do not require any separation step. By the first method, the measurements are obtained in the zero-crossing wavelengths and the calibration graphs are linear up to 20 microg/ml of Tartrazine and up to 40 microg/ml of Sunset Yellow. The determinations of Tartrazine and Sunset Yellow are also done by the first derivative of the ratio spectra. The methods are applied for determining both compounds in four commercial food products.     

Simultaneous determination of cyproterone acetate and ethinylestradiol in tablets by derivative spectrophotometry

Derivative spectrophotometry offers a useful approach for the analysis of drugs in multi-component mixtures. In this study a third-derivative spectrophotometric method was used for simultaneous determination of cyproterone acetate and ethinylestradiol using the zero-crossing technique. The measurements were carried out at wavelengths of 316 and 226 nm for cyproterone acetate and ethinylestradiol respectively. The method was found to be linear (r2>0.999) in the range of 0.5-6 mg/100 ml for cyproterone acetate in the presence of 35 microg/100 ml ethinylestsradiol at 316 nm. The same linear correlation (r2>0.999) was obtained in the range of 10-80 microg/100 ml of ethinylestradiol in the presence of 2 mg/100 ml of cyproterone acetate at 226 nm. The limit of determination was 0.5 mg/100 ml and 10 microg/100 ml for cyproterone acetate and ethinylestradiol respectively. The method was successfully applied for simultaneous determination of cyproterone acetate and ethinylestradiol in pharmaceutical preparations without any interferences from excipients.     

Simultaneous quantitative resolution of atorvastatin calcium and fenofibrate in pharmaceutical preparation by using derivative ratio spectrophotometry and chemometric calibrations.

In the present work, five different spectrophotometric techniques for simultaneous determination of formulations containing atorvastatin calcium (ATOR) and fenofibrate (FENO) in various combinations are described. In ratio spectra derivative spectrophotometry, analytical signals were measured at wavelengths corresponding to either maximums or minimums for both drugs in first derivative spectra of ratio spectra obtained by using either spectrum as divisor. For the remaining four methods using chemometric techniques, namely, classical least squares (CLS), inverse least squares (ILS), principal component regression (PCR) and partial least squares (PLS), the calibrations were constructed by using the absorption data matrix corresponding to the concentration data matrix, with measurements in the range of 231 - 310 nm (Deltalambda = 1 nm) in their zero-order spectra. The linearity range was found to be 4 - 22 and 2 - 20 microg/ml for ATOR and FENO, respectively. The validity of the proposed methods was successfully assessed for analyses of both drugs in laboratory-prepared mixtures and in commercial tablet formulations.     

Simultaneous determination of toxic metabolites by linear combination derivative spectrophotometry.

A linear combination derivative spectrophotometric method is described. The method overcomes the problem of overlapping in derivative spectrophotometry and allows the maximum use of quantitative information. In addition, the method can be used to increase the selectivity, sensitivity and accuracy of the simultaneous analysis of multicomponent mixtures. The application of the method to the simultaneous determination of bongkrekic acid and toxoflavin, the toxic metabolites produced by Pseudomonas farinofermentans, is described.     

Simultaneous determination of estradiol and medroxyprogesterone acetate in pharmaceutical formulations by second-derivative spectrophotometry

This paper reports a simple and fast method for the simultaneous determination of estradiol (ED) and medroxyprogesterone acetate (MP) in pharmaceutical formulations by second-derivative spectrophotometry. Methanol was used to extract the drugs from formulations, and subsequently the extracts were evaluated directly by derivative spectrophotometry. The drugs were determined simultaneously by using the graphic method at 297.4 nm for ED and the zero-crossing method at 273.4 nm for MP. If both compounds are present together in a sample, it is possible to quantitate one in the presence of the other. The best signal-to-noise ratio was found when the second derivative of the spectrum was used. The linear ranges for determination of the drugs were 4.7 x 10(-6) to 1.6 x 10(-4) and 7.2 x 10(-6) to 2.0 x 10(-4) mol/L for ED and MP, respectively. The ingredients commonly found in commercial pharmaceutical formulations do not interfere with the determination. Chemical and spectral variables were optimized for the determination of both analytes. Good levels of repeatability (relative standard deviation), 1.4 and 1.9%, were obtained for ED and MP, respectively. The proposed method was applied to the determination of these drugs in pharmaceutical formulations.     

Simultaneous determination of beryllium and aluminium in mixtures using derivative spectrophotometry

The spectrophotometric determination of beryllium and aluminium with 5,8-dihydroxy-1,4-naphthoquinone in the presence of a non-ionic surfactant is reported. Absorption maxima, molar absorptivity and Sandell's Sensitivity of 1:2 (M:L) beryllium and aluminium complexes are, 585 nm and 598 nm, 1.63 x 10(4) l.mole(-1).cm(-1) and 2.04 x 10(4) l.mole(-1).cm(-1), and 0.55 ng/cm(2) and 1.32 ng/cm(2) respectively. Beer's law is obeyed between 7.20-3.96 x 10(2) ng/ml beryllium and 1.08 x 10(1)-1.08 x 10(3) ng/ml aluminium. A method for simultaneous determination of beryllium and aluminium in their mixture using derivative spectra is described. The range 3.6 x 10(1)-3.6 x 10(2) ng/ml beryllium could be determined in the presence of 1.08 x 10(2)-1.08 x 10(3) ng/ml aluminium, and vice versa.     

Simultaneous determination of tartrazine,riboflavine, curcumin and erythrosine by derivative spectrophotometry

A quaternary mixture of Tartrazine (E-102), Riboflavine (E-101), Curcumin (E-100) and Erythrosine (E-127) can be analysed, by means of a previous extraction step using methyl isobutyl ketone (MIBK) as extracting agent, and resolving the binary mixtures obtained in the aqueous and organic phases by derivative spectrophotometry with measurements at the “zero-crossing” wavelengths and by derivative ratio spectra. The established conditions of extraction and the proposed methods have been applied to determine these colorants in several synthetic mixtures with good recoveries.     

Simultaneous determination of furaltadone and chloramphenicol in pharmaceuticals by derivative spectrophotometry and the derivative of the ratio spectra

Two methods for determining furaltadone and chloramphenicol in mixtures by first derivative spectrophotometry and the derivative of the ratio spectra are described. The procedures do not require any separation step. By both methods lower determination and detection limits are obtained. The methods were applied for determining the two compounds in two pharmaceutical products.     

Simultaneous determination of tartrazine and sunset yellow in cosmetic products by first-derivative spectrophotometry

A spectrophotometric method for the simultaneous determination of Tartrazine (TT) and Sunset Yellow (SY) in cosmetic products has been developed. An extraction process was carried out using methylene chloride and the colouring matters were measured in the aqueous phase formed, the other components of the sample remaining in the organic phase. The applicable concentration ranges were 0.5–10 ug/ml TT and 0.5–12 g/ml SY. The detection limits were 26 and 11 ng/ml and the relative standard deviations were 1.0 and 0.9% for TT and SY, respectively. The method was applied to the determination of both compounds in cosmetics.     

Simultaneous determination of copper and iron by second derivative spectrophotometry using mixtures of ligands

A highly sensitive and selective second derivative spectrophotometric method has been developed for the determination of copper and iron in mixtures. The method is based on the separation of the analytes by liquid-liquid extraction as picrate ion pairs. Iron-picrate, reacts in the organic phase of DCE with 5-phenyl-3-(4-phenyl-2-pyridinyl)-1,2,4-triazine (PPT). Similarly the copper-picrate reacts with 2,9-dimethyl-4,7-diphenyl-1,10-phenantroline (bathocuproine). The extracts were evaluated directly by derivative spectrophotometric measurement, using the zero-crossing approach for determination of copper and graphic method for iron. Iron and copper were thus determined in the ranges 8-120 ng ml(-1) and 8-125 ng ml(-1), respectively, in the presence of one another. The detection limits achieved (3sigma) were 2.9 ng ml(-1) of iron and 2.8 ng ml(-1) of copper. The relative standard deviations were in all instances less than 2.1%. The proposed method was applied to the determination of both analytes in river and tap water and the results were consistent with those provided by the AAS standard method.     

三重比光谱导数法同时测定氨基酸注射液中的三种芳香氨基酸

采用三重-比光谱导数分光光度法同时测定氨基酸注射液中的3种芳香氨基酸,讨论了测定酪氨酸、苯丙氨酸和色氨酸的实验条件.实验结果表明,在pH 7.4的NaH2PO4-NaOH缓冲溶液中,3种氨基酸的线性范围分别为:酪氨酸2.0×10-6～2.8×10-5 mol/L,苯丙氨酸2.0×10-5 ～1.6×10-3 mol/L,色氨酸4.0×10-7～1.6×10-6 mol/L.回收率在95%～105%之间.     

Simultaneous determination of iron and ruthenium as ternary complexes by extractive second derivative spectrophotometry

A highly sensitive and selective second derivative spectrophotometric method has been developed for the determination of ruthenium and iron in mixtures. The method is based on the formation of the binary complexes of iron and ruthenium with 4,7-diphenyl-1,10-phenanthroline (bathophenanthroline) in the presence of ethyleneglycol. These complexes are formed at pH 4.0-6.0 upon heating at 90 degrees C for 60 min. The ternary perchlorate complexes are then separated by liquid-liquid extraction. The extracts were evaluated directly by derivative spectrophotometric measurement, using the zero-crossing approach for determination of both analytes. Ruthenium and iron were thus determined in the ranges 9.6-450 and 16.3-280 ng/ml, respectively, in the presence of one another. The detection limits achieved (3sigma) were found to be 2.9 ng/ml of ruthenium and 4.9 ng/ml of iron. The relative standard deviations were in all instances less than 1.5%. The proposed method was applied to the determination of both analytes in synthetic mixtures.     

Simultaneous determination of ceftriaxone and streptomycin in mixture by 'ratio-spectra' 2nd derivative and 'zero-crossing' 3rd derivative spectrophotometry

Binary mixtures of antibiotics, ceftriaxone sulphate and streptomycin sodium, are assayed by 'ratio-spectra' 2nd derivative and 'zero-crossing' 3rd derivative spectrophotometry. Both procedures did not require any separation step and/or solving of equations. In the first method, calibration plots are linear up to 40mug/ml of ceftriaxone at 225, 241.5, 255.5, 255.5-241.5 and 225-241.5 nm (peak-to-peak), with r ranging from 0.9999 to 1.0000, and up to 30mug/ml of streptomycin at 206 nm, r 0.9998. Detection limits, at P = 0.05 level of significance: ceftriaxone, from 0.24 to 0.47 mug/ml (at the various wavelengths), streptomycin, 0.42 mug/ml. By the second method, lines of regression are linear up to 40 mug/ml of ceftriaxone, at 227.8 and 241.7 nm (r, 0.9999 and 1.0000) and up to 35 mug/ml of streptomycin (r, 0.9999). Detection limits were calculated to be 0.35 and 0.15 mug/ml for ceftriaxone and 0.27 mug/ml for streptomycin. Both methods were successfully applied to laboratory mixtures and to mixtures of commercial injections for these drugs.     

Simultaneous determination of carminic acid, riboflavine, curcumin and erythrosine by derivative spectrophotometry and ratio spectra derivative

A quaternary mixture of carminic acid, riboflavine, curcumin and erythrosine can be resolved with a previous extraction step into metyl-isobutyl ketone and, resolving the binary mixtures obtained in the aqueous phase and organic phase, using derivative spectrophotometry on the basis of the zero-crossing measurements in the first derivative spectra as well as the first derivative of ratio spectra. The conditions of extraction established and the proposed methods have been tested to determine these colorants in several synthetic mixtures of four dyes, obtaining good recoveries. The methods have been applied in yoghurt samples spiked with the dyes.     

Determination of pefloxacin in serum and pharmaceutical forms by derivative spectrophotometry

A method for the direct determination of pefloxacin in serum and pharmaceutical forms (tablets and ampoules) has been developed, based on the use of second-order derivative ultraviolet spectra. Spectrophotometric assay of pefloxacin in tablets and ampoules was carried out in 0.1 mol/L NaOH, while in serum it was performed in 0.1 mol/L NaOH with the addition of sodium dodecylsulfate, in 337–347 nm wavelength range. Linear calibration curves were obtained in the concentration ranges 2–30g/mL pefloxacin for tablets and ampoules and 0.12–5 g/ mL for serum samples. Relative error of determination, as criterion for accuracy, was less than 1%, while the precision was better than 4 ng/ml. The minimum detectable concentration of pefloxacin in serum was 15 ng/mL.