Repulsive and attractive Casimir forces between magnetodielectric slabs

The Casimir force between two parallel magnetodielectric slabs is investigated by means of Casimir–Lifshitz Theory. For two magnetodielectric slabs, one is permittivity-negative, while the other is permeability-negative in the real frequency space. Numerical results show that when the separation between these two slabs is small (or large), the Casimir force is repulsive, while for the intermediate separation, the Casimir force is attractive. As a consequence, there are two equilibria with zero Casimir force, and a repulsive–attractive–repulsive transition takes place with increasing the separation. Therefore, if the separation between two interacting slabs is manipulated in the small (or large) separation region, it is possible to overcome the stiction in micromechanical and nanomechanical systems.     

Finite-temperature Casimir effect in piston geometry and its classical limit

We consider the Casimir force acting on a d-dimensional rectangular piston due to a massless scalar field with periodic, Dirichlet and Neumann boundary conditions and an electromagnetic field with perfect electric-conductor and perfect magnetic-conductor boundary conditions. The Casimir energy in a rectangular cavity is derived using the cut-off method. It is shown that the divergent part of the Casimir energy does not contribute to the Casimir force acting on the piston, thus renders an unambiguously defined Casimir force acting on the piston. At any temperature, it is found that the Casimir force acting on the piston increases from −∞ to 0 when the separation a between the piston and the opposite wall increases from 0 to ∞. This implies that the Casimir force is always an attractive force pulling the piston towards the closer wall, and the magnitude of the force gets larger as the separation a gets smaller. Explicit exact expressions for the Casimir force for small and large plate separations and for low and high temperatures are computed. The limits of the Casimir force acting on the piston when some pairs of transversal plates are large are also derived. An interesting result regarding the influence of temperature is that in contrast to the conventional result that the leading term of the Casimir force acting on a wall of a rectangular cavity at high temperature is the Stefan–Boltzmann (or black-body radiation) term which is of order T ^d+1, it is found that the contributions of this term from the two regions separating the piston cancel with each other in the case of piston. The high-temperature leading-order term of the Casimir force acting on the piston is of order T, which shows that the Casimir force has a nontrivial classical ℏ→0 limit. Explicit formulas for the classical limit are computed.     

Repulsive Casimir forces

We discuss repulsive Casimir forces between dielectric materials with nontrivial magnetic susceptibility. It is shown that considerations based on the naive pairwise summation of van der Waals and Casimir-Polder forces may not only give an incorrect estimate of the magnitude of the total Casimir force but even the wrong sign of the force when materials with high dielectric and magnetic responses are involved. Indeed repulsive Casimir forces may be found in a large range of parameters, and we suggest that the effect may be realized in known materials. The phenomenon of repulsive Casimir forces may be of importance both for experimental study and for nanomachinery applications.     

A verification of quantum field theory — measurement of Casimir force

Here we review our work on measurement of the Casimir force between a large aluminum coated a sphere and flat plate using an atomic force microscope. The average statistical precision is 1% of the force measured at the closest separation. We have also shown nontrival boundary dependence of the Casimir force.     

The role of the “Casimir force analogue” at the microscopic processes of crystallization and melting

Melting (crystallization), a phase transition from a crystalline solid to a liquid state, is a common phenomenon in nature. We suggest a new factor, “the Casimir force analogue”, to describe mechanisms of melting and crystallization. The Casimir force analogue is a force occurring between the surfaces of solid and liquid phases of metals caused by different energy density of phonons of these phases. It explains abrupt changes in geometry and thermodynamic parameters at a melting point. “The Casimir force analogue” helps to estimate latent melting heat and to gain an insight into a solid–liquid transition problem.     

Constraints on the parameters of degree-type hypothetical forces following from the new Casimir force measurement

The additional force is calculated which acts due to the hypothetical degree-type interatomic interactions in the configuration of the recent Casimir force measurement. The constraints on the parameters of such interactions are obtained and compared with the constraints following from previous Casimir force measurements.     

Casimir force measurement using dynamic holography

The first holographic measurements are reported of the force between macroscopic objects mediated by zero-point electromagnetic fluctuations (Casimir force). A holographic interferometer is used to measure mirror oscillations with an amplitude of 1 pm. The objects under study are two thin metal films deposited on dielectric substrates. When one film is periodically oscillated, the first and second harmonics of the Casimir force acting on the other are detected. For the first time, an order-of-magnitude estimate is obtained for the Casimir force by using radiation pressure as a natural reference scale. The discrepancy between calculated and measured values of the Casimir force may be attributed to the small thickness and low conductivity of the metal films.     

Oscillating Casimir force between two slabs in a Fermi sea

The Casimir effect for two parallel slabs immersed in an ideal Fermi sea is investigated at both zero and nonzero temperatures. It is found that the Casimir effect in a Fermi gas is distinctly different from that in an electromagnetic field or a massive Bose gas. In contrast to the familiar result that the Casimir force decreases monotonically with the increase of the separation L between two slabs in an electromagnetic field and a massive Bose gas, the Casimir force in a Fermi gas oscillates as a function of L. The Casimir force can be either attractive or repulsive, depending sensitively on the magnitude of L. In addition, it is found that the amplitude of the Casimir force in a Fermi gas decreases with the increase of the temperature, which also is contrary to the case in a Bose gas, since the bosonic Casimir force increases linearly with the increase of the temperature in the region T < T_c, where T_c is the critical temperature of the Bose-Einstein condensation.     

On the validity of constraints on light elementary particles and extra-dimensional physics from the Casimir effect

We discuss the constraints on the parameters of a Yukawa interaction obtained from the indirect measurements of the Casimir pressure between parallel plates using the sphere–plate configuration. Recently, it was claimed in the literature that the application of the proximity force approximation (PFA) to the calculation of a Yukawa interaction in the sphere–plate configuration could lead to a large error of order 100% in the constraints obtained. Here we re-calculate the constraints both exactly and using the PFA, and arrive at identical results. We elucidate the reasons why an incorrect conclusion was obtained suggesting that the PFA is inapplicable to calculate the Yukawa force.     

Exact crossover function for the Casimir force in a non-interacting Bose gas

An exact calculation of the Casimir force for a non-interacting Bose gas confined between two parallel plates is presented. The gas can be free or trapped, parallel to the plates. Depending on the finite size parameter λ/L (λ is the de Bröglie wavelength and L is the separation of the plates) and the density parameter nλ³ (n, the number density), the Casimir force crosses over from a power law to an exponential fall off is clearly seen. Since the Casimir force measurement requires very small values of L, one needs to take into account of the condensation in a finite system.     

含色散特异材料三明治结构的量子悬浮效应

在金属板与电介质材料板基底间插入色散特异材料板形成三明治结构,并对其Casimir作用力进行了研究.基于Casimir-Lifshitz理论,通过麦克斯韦应力张量计算了真空涨落的辐射压,并对三明治结构利用电磁模式传输矩阵方法进行了数值计算分析.计算结果表明,原本两板结构中存在的Casimir吸引力,在插入特异材料板后的三明治结构中将转变为斥力,从而使轻薄的金属板产生量子悬浮效应。讨论了特异材料板的色散电磁响应特性以及电介质板基底的影响,结果表明特异材料磁等离子频率越大、磁共振频率越小以及电介质板基底的介电常数越小时,三明治结构中获得的斥力越大.此外,板间距增加到一定范围时,三明治结构中将出现Casimir平衡回复力.特异材料填充因子越小、三明治结构中层距和层厚越大时,三明治结构间的回复力会出现在较长距的位置.三明治结构中的量子悬浮效应与平衡回复力可保证微纳米机械系统稳定性,展现出基于真空辐射压的应用前景.     

The Contribution of the Vacuum Fluctuation to Casimir Effect

The path integral method is a useful tool which can be used to calculate contribution of ghost field to Casimir effect^[6]. But only free field was considered rather than interaction field. In this paper, we consider contribution of the vacuum fluctuation of QED to Casimir effect with the aid of source-field separation and Wick's expansion, and a little additional attractive force can be obtained from this method.     

Analytic approach to the thermal Casimir force between metal and dielectric

The analytic asymptotic expressions for the Casimir free energy, pressure and entropy at low temperature in the configuration of one metal and one dielectric plate are obtained. For this purpose we develop the perturbation theory in a small parameter proportional to the product of the separation between the plates and the temperature. This is done using both the simplified model of an ideal metal and of a dielectric with constant dielectric permittivity and for the realistic case of the metal and dielectric with frequency-dependent dielectric permittivities. The analytic expressions for all related physical quantities at high temperature are also provided. The obtained analytic results are compared with numerical computations and good agreement is found. We demonstrate for the first time that the Lifshitz theory, when applied to the configuration of metal-dielectric, satisfies the requirements of thermodynamics if the static dielectric permittivity of a dielectric plate is finite. If it is infinitely large, the Lifshitz formula is shown to violate the Nernst heat theorem. The implications of these results for the thermal quantum field theory in Matsubara formulation and for the recent measurements of the Casimir force between metal and semiconductor surfaces are discussed.     

Three-dimensional Casimir piston for massive scalar fields

We consider Casimir force acting on a three-dimensional rectangular piston due to a massive scalar field subject to periodic, Dirichlet and Neumann boundary conditions. Exponential cut-off method is used to derive the Casimir energy. It is shown that the divergent terms do not contribute to the Casimir force acting on the piston, thus render a finite well-defined Casimir force acting on the piston. Explicit expressions for the total Casimir force acting on the piston is derived, which show that the Casimir force is always attractive for all the different boundary conditions considered. As a function of a - the distance from the piston to the opposite wall, it is found that the magnitude of the Casimir force behaves like 1/a⁴ when a→0⁺ and decays exponentially when a→∞. Moreover, the magnitude of the Casimir force is always a decreasing function of a. On the other hand, passing from massless to massive, we find that the effect of the mass is insignificant when a is small, but the magnitude of the force is decreased for large a in the massive case.     

Measurement of the Casimir force between a gold sphere and a silicon surface with nanoscale trench arrays

We report measurements of the Casimir force between a gold sphere and a silicon surface with an array of nanoscale, rectangular corrugations using a micromechanical torsional oscillator. At distances between 150 and 500 nm, the measured force shows significant deviations from the pairwise additive formulism, demonstrating the strong dependence of the Casimir force on the shape of the interacting bodies. The observed deviation, however, is smaller than the calculated values for perfectly conducting surfaces, possibly due to the interplay between finite conductivity and geometry effects.     

Amplification phenomena of Casimir force fluctuations on close scatterers coupled via a coherent fermionic fluid

We study the mechanical actions affecting close scatterers immersed in a coherent fermionic fluid. Using a scattering field theory, we theoretically analyse the single-scatterer and the two-scatterer case. Concerning the single-scatterer case, we find that a net force affects the scatterer dynamics only in non-equilibrium condition, i.e. imposing the presence of a non-vanishing particle current flowing through the system. The force fluctuation (variance) is instead not negligible both in equilibrium and in non-equilibrium conditions. Concerning the two-scatterer case, an attractive fluid-mediated Casimir force is experienced by the scatterers at small spatial separation, while a decaying attractive/repulsive behavior as a function of the scatterer separation is found. Furthermore, the Casimir force fluctuations acting on a given scatterer in close vicinity of the other present an oscillating behavior reaching a long distance limit comparable to the noise level of the single-scatterer case. The relevance of these findings is discussed in connection with fluctuation phenomena in low-dimensional nanostructures and cold atoms systems.     

Casimir Force at a Finite Cut-Off

We calculate the Casimir force at a finite cut-off Λ by summing the forces induced by the all fluctuation modes. We show that the Casimir force is independent of the cut-off function in the limit LΛ → ∞. There is a correction in the order of (LΛ)^-2, when LΛ is finite and large. This correction becomes remarkable when L is comparable with the microscopic length scale Λ^-1. It has been demonstrated that the Casimir force at a finite cut-off should be defined by summing forces of all fluctuation modes, instead of the derivative of Casimir energy with respect to L where an additional derivative of the cut-off function has been introduced.     

The Casimir Effect at Finite Temperature in a Six-Dimensional Vortex Scenario

The Casimir effect for parallel plates satisfying the Dirichlet boundary condition in the context of effective QED coming from a six-dimensional Nielsen-Olesen vortex solution of the Abelian Higgs model with fermions coupled to gravity is studied at finite temperature. We find that the sign of the Casimir energy remains negative under the thermal influence. It is also shown that the Casimir force between plates will be weaker in the higher-temperature surroundings while keeps attractive. This Casimir effect involving the thermal influence is still inconsistent with the known experiments. We find that the thermal correction can not compensate or even reduce the modification from this kind of vortex model to make the Casimir force to be in less conflict with the measurements.