Silicon nanowires grown from Au-coated Si substrate

Amorphous Si nanowires were grown on an Au-coated Si substrate by heat treatment at 1000 °C under an H₂ atmosphere. The nanowires have a length of several tens of a micron and a diameter of 10–20 nm. The growth mechanism of the nanowires was investigated and explained with a solid–liquid–solid model. Received: 11 July 2002 / Accepted: 7 July 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +86/10-62751615, E-mail: yudp@pku.edu.cn     

Large-scale synthesis of crystalline β-SiC nanowires

Large quantities of high-purity crystalline β-SiC nanowires have been synthesized at relatively low temperature via a new simple method, the chemical-vapor-reaction approach, in a home-made graphite reaction cell. A mixture of milled Si and SiC powders and C₃H₆ were employed as the starting materials. The results show that the nanowires with diameters of about 10–35 nm are single crystalline β-SiCwithout any wrapping of amorphous material, and the nanowire axes lie along the 〈111〉 direction. Some unique properties are found in the Raman scattering from the β-SiC nanowires, which are different from previous observations of β-SiC materials. A possible growth mechanism for the β-SiC nanowires is proposed. Received: 27 August 2002 / Accepted: 28 August 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +86-29/8491-000, E-mail: zjli-sohu@sohu.com     

Synthesis of highly ordered LiMnO<Subscript>2</Subscript> nanowire arrays (by AAO template) and their structural properties

LiMnO₂ nanowire arrays were prepared using a porous anodic aluminum oxide (AAO) template from a sol–gel solution containing Li(OAc) and Mn(OAc)₂. Electron-microscope results showed that a uniform length and diameter of LiMnO₂ nanowires were obtained, and the length and diameter of the LiMnO₂ nanowires are dependent on the pore diameter and the thickness of the applied AAO template. X-ray diffraction and electron diffraction pattern investigations demonstrate that LiMnO₂ nanowires are a layered structure of LiMnO₂ crystal. X-ray photoelectron spectroscopy analysis indicates that a material closely resembling stoichiometric layered LiMnO₂ has been obtained. Received: 2 September 2001 / Accepted: 6 January 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +86-931/891-2582, E-mail: lihl@lzu.edu.cn     

Preparation of Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanowires by calcining the precursor powders synthesized in a novel inverse microemulsion

Manganese oxide (hausmannite) nanowires were prepared by annealing precursor powders at a temperature of 800 °C for 3 h, which were produced in a novel inverse microemulsion (IμE) system. The microstructures of the as-prepared Mn₃O₄ nanowires were investigated by means of X-ray diffraction, transmission electron microscopy, and Raman spectra. It has been found that the Mn₃O₄ nanowires were relatively straight and their surfaces were smooth with a typical diameter of 75–150 nm. The formation mechanism of the Mn₃O₄ nanowires is discussed. Received: 30 May 2002 / Accepted: 7 October 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. Fax: +86-25/359-5535, E-mail: wangqun@nju.edu.cn     

High yield incorporation and washing properties of halides incorporated into single walled carbon nanotubes

We describe here the high yield filling (i.e. >50%) of single walled nanotubes (SWNTs) with a variety of halides, achieved according to various modified filling procedures. Both bundles and discrete SWNTs can be filled continuously up to lengths of several hundred nm, often with filling yields approaching 60–70% or better. In addition some high yield filled SWNTs were subjected to long-term washing in either boiling or room temperature. aqueous media, which does not remove the filling from the tubules, but enables effective removal of water-soluble extraneous materials . Received: 10 May 2002 / Accepted: 25 October 2002 / Published online: 10 March 2003 RID="*" ID="*"Corresponding author. Fax: +44-1865/272-690, E-mail: jeremy.sloan@chem.ox.ac.uk     

Ion-beam synthesis and growth mechanism of diamond-like materials

Opposite to most other deposition methods, the dominating nucleation and growth mechanism during ion-beam deposition of energetic ions in the range between 10 eV and 10 keV occurs in a region of a few nanometers below the surface of the growing film. This process is called ‘subplantation’ – emphasizing the implantation of ions into a subsurface region. Ordering and phase formation is a result of the interaction of the deposited ions with the solid state that takes place within the short time scale of femto- and picoseconds. This extreme non-equilibrium process can result in metastable amorphous or crystalline structures. This review will present several examples of the influence of the deposition parameters on the properties of diamond-like materials synthesized using mass-selected ion-beam deposition. Furthermore, several existing models of the deposition process will be presented and critically discussed. Received: 11 November 2002 / Accepted: 12 November 2002 / Published online: 4 April 2003 RID="*" ID="*"Corresponding author. Fax: +49-551/39-4493, E-mail: carsten.ronning@phys.uni-goettingen.de     

Catalysed growth of novel aluminium oxide nanorods

Micron-scale coral-like aluminium oxide structures have been generated by heating a mixture of AlB₂ and Co powders in a quartz boat at ca. 1050 °C under N₂. Upon sonication in acetone, the structures break down into elongated single-crystal aluminium oxide nanorods ranging from 20 to 200 nm in diameter and up to 5 μm in length. Single Co particles are often found attached to nanorod tips. A vapour–liquid–solid (V–L–S) mechanism appears to be responsible for the aluminium oxide nanorod growth. Received: 21 January 2003 / Accepted: 22 January 2003 / Published online: 28 March 2003 RID="*" ID="*"Corresponding author. E-mail: d.walton@sussex.ac.uk     

GaN nanotweezers

A new form of GaN nanomaterial (nanotweezers) has been obtained by chemical vapor deposition on an etched cubic MgO (100) plane. The nanotweezers consist of a bottom rod and two arms. The bottom rods have diameters of about 100–150 nm and lengths of about 200–500 nm, on which two arms grow out. The bottoms of the arms are about 40–70 nm and the tops are about 15–30 nm in diameter, and 0.8–1.5 μm in length. X-ray and electron diffractions indicate the nanotweezers are zinc blende gallium nitride. We infer that the fabrication of the GaN nanotweezers is associated with small convex hillocks on the surface of the etched cubic MgO (100) single-crystal substrates and that the nanotweezers grow by a growth mechanism that is similar to vapor-phase heteroepitaxy. Received: 23 April 2002 / Accepted: 25 April 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +86-10/8264-9531, E-mail: xlchen@aphy.iphy.ac.cn     

Synthesis and photoluminescence of aligned SiO<Subscript>x</Subscript> nanowire arrays

Aligned SiO_x nanowire arrays standing on a Si substrate were successfully synthesized using a simple method by heating a single-crystalline Si slice covered with SiO₂ nanoparticles at 1000 °C in a flowing Ar atmosphere. The SiO_x nanowire arrays were characterized by scanning electron microscopy and transmission electron microscopy. The SiO_x nanowires become progressively thinner from bottom to top. The formation process of the SiO_x nanowire arrays is closely related to a vapor–solid mechanism. Room-temperature photoluminescence measurements under excitation at 260 nm showed that the SiO_x nanowire arrays had a strong blue–green emission at 500 nm (about 2.5 eV), which may be related to oxygen defects. Received: 29 April 2002 / Accepted: 30 April 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +86-551-559-1434, E-mail: gwmeng@mail.issp.ac.cn     

Micrometer-sized Si-Sn-O novel structures with SiONWs on their surfaces

Novel micrometer-sized Si-Sn-O structures with SiO₂ nanowires (SiONWs) growing from their surfaces have been achieved at about 980 °C on Si (111) wafer catalyzed by Sn vapor generated from Sn powders. The Si wafer itself served as a silicon source in the reaction. The micrometer-sized structures, with diameters of several micrometers to several tens of micrometers consisted of Sn, Si and O. The amorphous SiONWs growing from the surface of the micrometer-sized structures were smooth, with diameters about 120 nm and with a composition close to that of SiO₂. The growth mechanism of these novel structures is discussed briefly. Received: 30 July 2002 / Accepted: 18 September 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +86-551/5591434, E-mail: shsuncn@hotmail.com     

Growth and evolution of epitaxial erbium disilicide nanowires on Si (001)

Sub-monolayer amounts of Er deposited onto Si (001)react with the substrate to form epitaxial nanowires of crystalline ErSi₂. The growth of uniaxial structures occurs because the different crystal structures of ErSi₂ and Si have a good lattice match along one Si<110> crystallographic axis but a significant mismatch along the perpendicular Si<110> axis. The nucleation, growth, and subsequent evolution of ErSi₂ nanowires were investigated as functions of erbium coverage on the Si (001) surface, annealing time, and annealing temperature. Low annealing temperatures (620 °C) and times (5 min) produced ErSi₂ nanowires with widths of a few nanometers, heights less than one nanometer, and lengths of several hundred nanometers. For longer annealing times at low temperature, the surface roughened without significant ripening of the wires. Annealing at intermediate temperatures (∼700 °C) caused stacking faults to form along the long axis of the nanowires and their lengths to ripen. At high temperature (800 °C), the wires broke apart into short segments with stacking faults. Received: 30 January 2002 / Accepted: 31 January 2002 / Published online: 3 May 2002     

Femtosecond-laser-induced nanostructure formed on hard thin films of TiN and DLC

We report observation of nanostructures formed on thin TiN and DLC films that were irradiated by 800- and 267-nm, femtosecond (fs) Ti:sapphire laser pulses at an energy fluence slightly above the ablation threshold. On the ablated thin-film surfaces, the linearly polarized fs pulses produce arrays of fine periodic structures that are almost oriented to the direction perpendicular to the laser polarization, while the circularly polarized light forms fine-dot structures. The size of these surface structures is 1/10–1/5 of the laser wavelength and decreases with a decrease in the laser wavelength. Received: 3 September 2002 / Accepted: 4 September 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. Fax: +81-778/62-3306, E-mail: yasuma@fukui-nct.ac.jp     

Kinetics of nanocrystallization in FeCoNbB(Cu) alloys

HITPERM alloys (FeCoMBCu; M=Nb, Zr, Hf...) have been recently developed and proposed as competitive soft magnetic materials for high-temperature applications. To our knowledge, this work contains the first results on nanocrystallization isothermal kinetics for these alloys. Analysis of nanocrystallization of the studied FeCoNbB(Cu) alloys in the frame of the Johnson–Mehl–Avrami theory shows a slowing-down of the kinetics and anomalously low values of the Avrami exponent, in a similar way to that reported for FeSiBNbCu (FINEMET)-type alloys. Compositional effects of Co substitution and Cu addition are considered. A more realistic kinetic model developed by Hermann et al. accounts for the experimental data. Received: 14 November 2001 / Accepted: 24 June 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +34-95/461-2097, E-mail: conde@us.es     

Interfaces under ion irradiation: growth and taming of nanostructures

We have investigated the synthesis of nanostructures, as well as the control of their size and location by means of ion beams. The phase separation and interface kinetics under ion irradiation give new possibilities for controlling the growth of nanostructures. Additionally, the chemical decomposition of the host matrix by collisional mixing can contribute to the self-organization of nanostructures, especially at interfaces. It is shown how collisional mixing during ion implantation affects nanocrystal (NC) synthesis and how ion irradiation through NCs modifies their size and size distribution. An analytical expression for solute concentration around an ion-irradiated NC was found, which may be written like the well-known Gibbs–Thomson relation. However, parameters have modified meanings, which has a significant impact on the evolution of NC ensembles. “Inverse Ostwald ripening” of NCs, resulting in an unimodal NC size distribution, is predicted, which has been confirmed experimentally for Au NCs in SiO₂ and by kinetic lattice Monte Carlo simulations. At interfaces, the same ion-irradiation-induced mechanism may result in self-organization of NCs into a thin δ-layer. Collisional decomposition of SiO₂ may enhance the NC δ-layer formation in SiO₂ at the Si/SiO₂ interface. The distance of the self-organized NC δ-layer from the SiO₂/Si interface renders the structure interesting for non-volatile memory applications. Received: 11 November 2002 / Accepted: 12 November 2002 / Published online: 4 April 2003 RID="*" ID="*"Corresponding author. Fax: +49-351-260-3285, E-mail: K.-H.Heinig@fz-rossendorf.de     

Femtosecond study of surface structure and composition and time-resolved spectroscopy in metals

Surface structuring and compositioning in aluminum alloy 2024-T3 were demonstrated using a femtosecond pulse laser. Surface nanostructuring was developed as a function of laser parameters and the surface micrographs of the scanning electron microscopy were characterized as a function of incident laser fluence. Surface compositioning was performed by selectively removing the elements on the surface of the sample. Femtosecond studies of highly excited electrons were performed by a pump–probe technique, and the thermalization time was found to be in a range of 1.5–3 ps, increasing with incident fluence. The time-resolved measurement is well matched to the numerical calculation. Received: 6 September 2001 / Accepted: 18 July 2002 / Published online: 25 October 2002 RID="*" ID="*"Corresponding author. Fax: +1-405/744-6811, E-mail: dou@okstate.edu     

Thermal and carrier transport originating from photon recycling and non-radiative recombination in laser micromachining of GaAs thin films

Coupled thermal and carrier transports (electron/hole generation, recombination, diffusion and drifting) in laser photoetching of GaAs thin film is investigated. A new volumetric heating mechanism originating from SRH (Shockley–Read–Hall) non-radiative recombination and photon recycling is proposed and modeled based on recent experimental findings. Both volumetric SRH heating and Joule heating are found to be important in the carrier transport, as well as the etching process. SRH heating and Joule heating are primarily confined within the space-charge region, which is about 20 nm from the GaAs surface. The surface temperature rises rapidly as the laser intensity exceeds 10⁵ W/m². Below a laser intensity of 10⁵ W/m², the thermal effect is negligible. The etch rate is found to be dependent on the competition between photovoltaic and photothermal effects on surface potential. At high laser intensity, the etch rate is increased by more than 100%, due to SRH and Joule heating. Received: 24 January 2002 / Accepted: 11 April 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +1-310/206-2302, E-mail: xiang@seas.ucla.edu     

Sub-ps laser microstructuring of soft X-ray Mo/Si multilayer gratings

The sub-picosecond laser microstructuring of multilayer gratings is presented in this paper. A micromachining system operating with a 0.5 ps KrF laser at 248 nm was used to etch grating structures with a groove width of 1–2 μm in Mo/Si and Si/Mo multilayers. Atomic force microscopy, scanning electron microscopy and X-ray reflectivity were used to characterize the microetched patterns. The ω-scans around the 1st Bragg maximum show symmetric satellites up to 3rd order, with positions corresponding to the grating period. The use of sub-picosecond laser pulses minimizes the thermally affected zone and enhances the quality of the etched features. Short pulse laser processing is advantageous for the fabrication of high spatial resolution microstructures required in X-ray optics. Received: 21 May 2002 / Accepted: 19 August 2002 / Published online: 15 January 2003 RID="*" ID="*"Corresponding author. Email: dpapa@iesl.forth.gr     

Electron structure and electron dynamics at InSb(111)2×2 semiconductor surface

The conduction band electronic structure and the electron dynamics of the clean InSb(111)2×2 surface have been studied by laser based pump-and-probe photoemission. The results are compared to earlier studies of the InSb(110) surface. It is found that both the energy location and the time dependence of the photoexcited structures are very similar for the two surfaces. This indicates that the dominant part of the photoemission signal in the conduction band region is due to excitations of electrons in the bulk region and that the surface electronic states play a minor role. The fast decay of the excited state, τ∼12 ps, indicates that diffusion of hot electrons into the bulk is an important mechanism. Received: 9 May 2001 / Accepted: 9 July 2002 / Published online: 25 October 2002 RID="*" ID="*"Corresponding author. Fax: +46-0824/913-1, E-mail: gm@matphys.kth.se     

Tunable ultraviolet optical parametric oscillator for differential absorption lidar measurements of tropospheric ozone

A pulsed optical parametric oscillator (OPO) with intracavity sum frequency mixing was developed generating energies of up to 16 mJ in the 281–293 nm wavelength range. Both OPO process and sum frequency mixing are pumped by the harmonics of a single, medium-sized Nd:YAG laser. The system is characterized by a high overall efficiency (∼4% conversion from 1064 nm to the UV), a very compact set-up and stable and reliable operation. This system was successfully employed to measure tropospheric ozone using the differential absorption lidar (DIAL) technique and shows much promise as a lidar transmitter in airborne case studies as well as in unattended lidar systems for long-term monitoring. An unattended ozone profiling system could already be successfully realized. Received: 1 April 2002 / Revised version: 30 May 2002 / Published online: 2 September 2002 RID="*" ID="*"Corresponding author. Fax: +49-8153/28-1271, E-mail: Andreas.Fix@dlr.de     

A fast-response near-infrared tunable diode laser absorption spectrometer for in situ measurements of CH4 in the upper troposphere and lower stratosphere

We describe a near-infrared in situ tunable diode laser spectrometer developed for atmospheric measurements of CH₄ in the upper troposphere and lower stratosphere (UT/LS). The instrument is designed to provide fast-response (0.5–1 Hz) measurements and operate autonomously on the NASA WB-57F high-altitude aircraft. A single-mode InGaAsP distributed feedback laser diode operating at 1.6537 μm scans continuously over the R(3) rotation–vibration transition in the 2ν₃ band. We use a direct absorption technique incorporating a custom-designed long path length (252 m) low-volume (3.6 L) astigmatic Herriott cell. The present detection sensitivity is 5×10¹⁰ molecules cm^-3, corresponding to ∼20 ppbv in the UT/LS, with the main limit to instrument precision being background optical interference fringes. In-flight performance is demonstrated by presentation of recent data. Received: 25 January 2002 / Revised version: 5 April 2002 / Published online: 21 August 2002 RID="*" ID="*"Corresponding author. Fax: +1-303/497-5373, E-mail: richard@al.noaa.gov