Development of an ICP-IDMS method for accurate routine analyses of toxic heavy metals in polyolefins and comparison with results by TI-IDMS

An inductively coupled plasma isotope dilution mass spectrometric (ICP-IDMS) method was developed as a suitable method – with respect to its sensitivity, precision, accuracy, and time-consumption – for the analysis of toxic heavy metal traces (Pb, Cd, Cr, and Hg) in polyolefins. Results for Pb, Cd, and Cr were compared with those obtained by thermal ionization isotope dilution mass spectrometry (TI-IDMS), which was used as a reference method. Because of its high first ionization potential and its high volatility mercury could not be determined by TI-IDMS. A multi-element spike solution, containing isotopically enriched ²⁰⁶Pb, ¹¹⁶Cd, ⁵³Cr, and ²⁰¹Hg, was used for the isotope dilution step. Decomposition of the polyolefin samples was carried out with concentrated HNO₃ at temperatures of about 300?°C in a high pressure asher (HPA). This procedure decomposes polyolefins completely and allows isotopic equilibration between sample and spike isotopes. Detection limits of 16 ng/g, 5 ng/g, 164 ng/g, and 9 ng/g were obtained for Pb, Cd, Cr, and Hg by ICP-IDMS using only sample weights of 0.25 g. In different commercially available polyethylene samples heavy metal concentrations in the range of < 5 ng/g to 4 × 10³ ng/g were analyzed. Both mass spectrometric methods were applied within the EU project “Polymeric Elemental Reference Material (PERM)” for the certification of two polyethylene reference materials. The ICP-IDMS results agreed very well with those of TI-IDMS which demonstrates the accuracy of the ICP-IDMS method also suitable for routine analyses.     

Comparison of heavy metal analyses in hydrofluoric acid used in microelectronic industry by ICP-MS and thermal ionization isotope dilution mass spectrometry

An isotope dilution mass spectrometric (IDMS) method with the thermal ionization (TI) technique has been developed for the determination of trace impurities of Cr, Fe, Ni, Cu, Zn, Ag, Cd, Tl, Pb, Th, and U in high-purity HF (50% by weight) used in the semiconductor industry. The evaporation step of the HF solution was carried out in an apparatus which did not significantly contribute to contaminations of the heavy metals to be analysed. This apparatus allowed fast evaporation of the HF solution of up to 200 ml/h and therefore also a fast trace heavy metal/matrix separation was carried out. The evaporation step was also used in connection with inductively coupled plasma mass spectrometry (ICP-MS) when applying the isotope dilution technique and an external calibration for quantification, respectively. The detection limits for TI-IDMS were (in pg/g): Cr=30, Fe=400, Ni=70, Cu=20, Zn=1100, Ag=70, Cd=10, Tl=1, Pb=16, Th=3, and U=1. With ICP-MS in combination with the evaporation step, detection limits of less than 50 pg/g have been achieved for Cr, Ni, and Zn and of <5 pg/g for the other elements except Fe, which could not be determined in concentrations less than 100 ng/g. On the other hand, the detection limits were much higher when the HF matrix was not removed before measuring by ICP-MS. A comparison of the different ICP-MS methods (isotope dilution technique and external calibration for both HF evaporated samples and those with HF matrix) with the results of TI-IDMS has been carried out. An excellent agreement was achieved between the results of TI-IDMS and the two ICP-MS methods using the HF evaporation step, whereas the ICP-MS techniques without HF evaporation essentially deviated from these results. Fe was the only trace element of all investigated heavy metals which could only be analysed by TI-IDMS in high purity HF in a concentration of about 3 ng/g. Although ICP-MS with isotope dilution and external calibration resulted in comparable analytical data, the ICP-IDMS method has some practical advantages such as time-saving and more reliable results.     

Use of thermal ionization isotope dilution mass spectrometry (TI-IDMS) as an oligo-element method for the determination of photographically relevant trace elements in AgCl emulsions

Thermal ionization isotope dilution mass spectrometry (TI-IDMS) was used as an oligo-element method for the determination of Cr, Cd and Pb in photographic AgCl emulsions. After addition of an appropriate amount of isotopically enriched spikes (⁵³Cr, ¹¹⁶Cd and ²⁰⁶Pb) to the solid samples, the latter were completely dissolved in NH₃ solution, permitting isotopic exchange to take place. Thereafter, AgCl was selectively removed by precipitation, whereby ultrasonic treatment was used to enhance the recovery of the elements of interest. Despite the use of concentrated HNO₃ and H₂O₂ during further sample processing, preliminary experiments indicated the presence of a substantial remainder of the organic matrix (gelatine). Hence, the analytes of interest were isolated by means of electrolytic deposition on Pt electrodes. Subsequently, the deposits were dissolved from the Pt electrodes using a mixture of concentrated HNO₃ and H₂O₂ and the solutions evaporated to dryness. The solid residues were taken up in diluted HNO₃ and loaded onto Re filaments. In order to improve the ionization yield, prior to the sample, a silicagel suspension containing AlCl₃ was loaded onto the filament and after sample loading, both H₃BO₃ (for Cr and Pb) and H₃PO₄ (for Cd and Pb) were added as further ionization aids. Finally, the isotope ratios of interest (⁵²Cr/⁵³Cr, ¹¹⁴Cd/¹¹⁶Cd and ²⁰⁶Pb/²⁰⁸Pb) were determined using thermal ionization mass spectrometry, whereby all three analyte elements were vaporized from the same filament. The limits of detection obtained using this procedure range from 0.4 ng (for Cd) to 4 ng (for Pb). Four different AgCl emulsions were analyzed. For Cr, the concentration found was quite similar for all emulsions analyzed, as it varied between ～ 40 and ～ 100 ng/g only. For Cd, very low values were found for all samples analyzed (≤ 3 ng/g). Finally, for Pb a much larger variation from ～ 10 ng/g up to ～ 5.5 μg/g was observed. For the sample with the highest Pb content, an excellent agreement could be established between the results obtained using quadrupole-based ICP-IDMS and those using TI-IDMS. For the determination of Cr by means of quadrupole-based ICP-IDMS, an instrument equipped with a ShieldTorch system was used to avoid spectral overlap of the ⁵²Cr⁺ and ⁴⁰Ar¹²C⁺ ion signals. Also in this case, the results obtained are in very good agreement with those obtained using TI-IDMS. The comparison between TI-IDMS and ICP-IDMS also made clear that sample inhomogeneity limits the between-sample precision attainable.     

Determination of zirconium traces in polymers by ICP-IDMS – a powerful and fast method for routine testing of zirconium residues in polyolefins

Zirconium trace analyses play an important role for polyolefins produced by modern catalytic processes with zirconium metallocenes. A reliable and fast routine testing method by inductively coupled plasma isotope dilution mass spectrometry (ICP-IDMS) was therefore developed, which allows the determination of zirconium in polymers down to the low ng/g level. With respect to its precision, accuracy, and time-consumption this method is suitable for routine testing of production processes. A spike solution, enriched in the stable isotope ⁹¹Zr, was prepared and used for the isotope dilution procedure, which has the advantage of being an internal “one point” calibration method. The polyolefin samples were dissolved by microwave assisted digestion with a mixture of concentrated HNO₃/HF.     

Determination of zirconium traces in polymers by ICP-IDMS – a powerful and fast method for routine testing of zirconium residues in polyolefins

Zirconium trace analyses play an important role for polyolefins produced by modern catalytic processes with zirconium metallocenes. A reliable and fast routine testing method by inductively coupled plasma isotope dilution mass spectrometry (ICP-IDMS) was therefore developed, which allows the determination of zirconium in polymers down to the low ng/g level. With respect to its precision, accuracy, and time-consumption this method is suitable for routine testing of production processes. A spike solution, enriched in the stable isotope ⁹¹Zr, was prepared and used for the isotope dilution procedure, which has the advantage of being an internal “one point” calibration method. The polyolefin samples were dissolved by microwave assisted digestion with a mixture of concentrated HNO₃/HF. Received: 16 November 1998 / Revised: 29 January 1999 / Accepted: 18 February 1999     

Determination of heavy metals in TiO2 with isotope dilution mass spectrometry

An isotope dilution mass spectrometric (IDMS) method has been developed for the determination of trace impurities (Fe, Cu, Cr, Ni, Cd, Pb, Tl, and U) in TiO₂; this is of special interest for the quality control of this pigment substance. The measurement of the isotope ratios was carried out using a compact thermal ionization quadrupole mass spectrometer by producing positive thermal ions. For the dissolution of the sample, microwave digestion with HF was applied. Different separation techniques (ion exchange chromatography, extraction, electrolytic deposition) were used for the trace/matrix separation and the element specific isolation of the different trace elements to be determined. The detection limits obtained were (in ng/g): Fe=90, Cu=11, Ni=8, Cd=7, Pb=26, Tl=0.6, U=0.2. Because IDMS usually results in accurate analytical results, this method can best be used for calibration of other analytical methods, or for the certification of corresponding standard reference materials.     

Determination of heavy metals in TiO2 with isotope dilution mass spectrometry

An isotope dilution mass spectrometric (IDMS) method has been developed for the determination of trace impurities (Fe, Cu, Cr, Ni, Cd, Pb, Tl, and U) in TiO₂; this is of special interest for the quality control of this pigment substance. The measurement of the isotope ratios was carried out using a compact thermal ionization quadrupole mass spectrometer by producing positive thermal ions. For the dissolution of the sample, microwave digestion with HF was applied. Different separation techniques (ion exchange chromatography, extraction, electrolytic deposition) were used for the trace/matrix separation and the element specific isolation of the different trace elements to be determined. The detection limits obtained were (in ng/g): Fe=90, Cu=11, Ni=8, Cd=7, Pb=26, Tl=0.6, U=0.2. Because IDMS usually results in accurate analytical results, this method can best be used for calibration of other analytical methods, or for the certification of corresponding standard reference materials.     

Determination of heavy metal traces in metallic materials with IDMS

Summary Two pure copper samples were analysed for Cr, Ni, Zn, Cd, and Pb with isotope dilution mass spectrometry (IDMS) as a part of a certification campaign of the European Community Bureau of Reference in Brussels. Additionally, one commercially available copper powder was determined for Zn, Cd, and Pb. After dissolution of the sample in aqua regia Pb was separated from the matrix by anodic electrodeposition, the other elements by anion-exchange chromatography. Positive thermal ions were produced in a single-filament ion source using the silica gel technique with phosphoric acid for Zn, Cd, and Pb and with boric acid for Cr and Ni. Most of the heavy metals could be determined with relative standard deviations of about 1% down to the ng/g level. The detection limits were 13 ng/g for Zn, 4 ng/g for Ni, 2 ng/g for Cr, 1 ng/g for Pb, and 0.03 ng/g for Cd. The results were compared with those obtained by another IDMS laboratory and by other methods applied during the certification campaign.

---

Bestimmung von Schwermetallspuren in metallischen Werkstoffen mit der massenspektrometrischen IsotopenverdünnungsanalyseTeil 1. Bestimmung von Cr, Ni, Zn, Cd und Pb in reinem Kupfer

     

Determination of cadmium,mercury and lead in seawater by electrothermal vaporization isotope dilution inductively coupled plasma mass spectrometry

Electrothermal vaporization isotope dilution inductively coupled plasma mass spectrometry (ETV-ID-ICP-MS) has been applied to the determination of Cd, Hg and Pb in seawater samples. The isotope ratios of the elements studied in each analytical run were calculated from the peak areas of each isotope. Various modifiers were tested for the best signal of these elements. After preliminary studies, 0.15% m/v TAC and 4% v/v HCl were added to the sample solution to work as the modifier. The ETV-ID-ICP-MS method has been applied to the determination of Cd, Hg and Pb in NASS-4 and CASS-3 reference seawater samples and seawater samples collected from Kaohsiung area. The results for reference sample NASS-4 and CASS-3 agreed satisfactorily with the reference values. Results for other samples determined by isotope dilution and method of standard additions agreed satisfactorily. Detection limits were approximately 0.002, 0.005 and 0.001 ng ml⁻¹ for Cd, Hg and Pb in seawater, respectively, with the ETV-ICP-MS method. Precision between sample replicates was better than 20% for most of the determinations.     

Determination of heavy metal complexes with humic substances by HPLC/ICP-MS coupling using on-line isotope dilution technique

An isotope dilution mass spectrometric (IDMS) method has been developed for the simultaneous determination of the complexes of 11 heavy metals (Ag, Cd, Cu, Mo, Ni, Pb, Tl, U, W, Zn and Zr) with humic substances (HS) by coupling HPLC with ICP-MS and applying the on-line isotope dilution technique. The HPLC separation was carried out with size exclusion chromatography. This HPLC/ICP-IDMS method was applied to samples from a brown water, ground water, sewage and seepage water as well as for a sample containing isolated fulvic acids. The total contents of heavy metals and of their complexes were analyzed in these samples with detection limits in the range of 5–110 ng/L. The analysis of heavy metal/HS complexes from the different waters resulted in characteristic fingerprints of the distribution pattern of heavy metals in the separated HS fractions. A comparison between the total heavy metal concentrations and their portions bound to humic substances showed distinct differences for the various metals. Simultaneous ¹²C detection was used for the characterization of HS complexes not identified by UV detection and for the determination of relative DOC concentrations of chromatographic peaks. Received: 21 February 1997 / Revised: 27 May 1997 / Accepted: 28 May 1997     

Determination of cadmium,mercury and lead in coal fly ash by slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry

Ultrasonic slurry sampling electrothermal vaporization isotope dilution inductively coupled plasma mass spectrometry (USS-ETV-ID-ICP-MS) has been applied to the determination of Cd, Hg and Pb in coal fly ash samples. Thioacetamide (TAC) was used as the modifier. Since the sensitivities of the elements studied in coal fly ash slurry and aqueous solution were quite different, isotope dilution method was used for the determination of Cd, Hg and Pb in these coal fly ash samples. The isotope ratios of each element were calculated from the peak areas of each injection peak. This method has been applied to the determination of Cd, Hg and Pb in NIST SRM 1633a coal fly ash reference material and a coal fly ash sample collected from Kaohsiung area. Analysis results of reference sample NIST SRM 1633a coal fly ash agreed satisfactorily with the certified values. The other sample determined by isotope dilution and method of standard additions was agreed satisfactorily. Precision was better than 6% for most of the determinations and accuracy was better than 4% with the USS-ETV-ID-ICP-MS method. Detection limits estimated from standard addition curves were in the range of 24–58, 6–28 and 108–110 ng g⁻¹ for Cd, Hg and Pb, respectively.     

Schwermetall-Spurenbestimmung mit einem kompakten Thermionen-Quadrupol-Massenspektrometer

Zusammenfassung Es wird ein Verfahren beschrieben, welches eine Spurenbestimmung der Schwermetalle Pb, Cd, Tl, Cu und Zn durch massenspektrometrische Isotopenverdünnungsanalyse bei Verwendung eines kompakten Thermionen-Quadrupolgerätes erlaubt. Mit dieser Methode werden sehr verschiedenartige Probenmaterialien, wie Klärschlämme, Böden, Sediment, Phosphaterz und Müllasche analysiert. Die angewandten Aufschlußverfahren ermöglichen grundsätzlich eine Unterscheidung zwischen dem Totalgehalt der Schwermetalle sowie dem in Königswasser löslichen Anteil. Als Isolierungsmethoden werden alternativ eine elektrolytische Abscheidung und eine ionenaustausch-chromatographische Abtrennung diskutiert. Dabei ermöglicht eine gemeinsame Elektrodeposition der Elemente Pb, Cd, Tl und Cu auch die entsprechende massenspektrometrische Oligoelementbestimmung. Diese ist auf Proben mit nicht zu extremen Schwermetallgehalten anwendbar. Dagegen kann die Methode bei chromatographischer Abtrennung der Elemente ohne Einschränkung eingesetzt werden. Soweit Standard-Referenzmaterialien analysiert werden, stimmen die Ergebnisse mit den zertifizierten Werten überein. Vergleiche mit den massenspektrometrischen Ergebnissen bei Verwendung eines Magnetgerätes zeigen innerhalb der Fehlergrenzen identische Werte, so daß mit dem kompakten und einfach handhabbaren Quadrupolgerät für die definitive Methode der massenspektrometrischen Isotopenverdünnungsanalyse eine breitere Anwendung als bisher offen steht. Die Nachweisgrenzen des beschriebenen Verfahrens liegen für Pb bei 3 ng/g (Elektrolyse) bzw. 13 ng/g (Ionenaustauscher), für Cu bei 2 ng/g, für Cd und Tl bei 6 ng/g und für Zn bei 27 ng/g. Damit können alle umweltrelevanten Materialien der beschriebenen Art auf die genannten Schwermetalle hin analysiert werden.

---

Heavy metal trace determination with a compact thermal ionization quadrupole mass spectrometerPart 1. Analysis of sewage sludges, soils and analogous materials

Summary An analytical method is described which allows trace determinations of the heavy metals Pb, Cd, Tl, Cu, and Zn with isotope dilution mass spectrometry using a compact thermal ionization quadrupole instrument for measuring the isotope ratios. Different materials, e.g. sewage sludges, soils, a sediment, a phosphat rock and a city waste incineration ash are analysed with this method. In principle, the total heavy metal contents as well as the portion, which is dissolved in aqua regia, can be determined by the chemical processes used for the decomposition of the samples. Alternatively, an electrolytic deposition and ion-exchange chromatography can be applied to separate heavy metals from the matrix. A mass spectrometric oligo-element determination of Pb, Cd, Tl, and Cu is possible by electrode-positing these elements. This type of determination can be applied to all samples which are not too extreme in their heavy metal contents. The chromatographic separation of the elements can be used without any restriction. So far as standard reference materials are analysed, the results determined with the described isotope dilution technique and the quadrupole mass spectrometer agree well with the certified values. A comparison of results, obtained with a magnetic sector field instrument, with the results of the quadrupole mass spectrometer shows identical values within the limits of error. Therefore, the availability of the quadrupole thermal ionization mass spectrometer, which is a cost-efficient solution and an instrument which is relatively easy to handle, establishes a stronger basis for the application of the isotope dilution technique. The detection limits for the described method are: 3 ng/g (electrolytic deposition) and 13 ng/g (chromatographic separation) for Pb, 2 ng/g for Cu, 6 ng/g for Cd and Tl, and 27 ng/g for Zn. These detection limits enable the analyses of all environmental samples of the described type with respect to the heavy metals mentioned.

---

---

Herrn Prof. Dr. H. Hartkamp zum 60. Geburtstag gewidmet

---

Dem Bundesministerium für Forschung und Technologie sowie dem Fonds der Chemischen Industrie danken wir für die finanzielle Unterstützung.     

Determination of ruthenium in photographic emulsions – development and comparison of different sample treatments and mass spectrometric methods

Different sample treatment procedures were combined with inductively coupled plasma mass spectrometry (ICP-MS) and negative thermal ionisation mass spectrometry (NTI-MS) for the determination of ruthenium traces in photographic emulsions. Dissolution of the samples in concentrated ammonia solution was used in connection with ICP-MS by external calibration, which has the advantage of a simple sample preparation technique but introduces high amounts of the silver matrix into the mass spectrometer. On the other hand, isotope dilution mass spectrometry (IDMS) with an enriched ⁹⁹Ru spike solution was applied for ICP-MS and NTI-MS measurements, respectively, in connection with a significant reduction of the matrix by AgCl precipitation. In these cases loss of ruthenium by the AgCl precipitate has no effect on the analytical result. The results of the different methods agreed usually well analysing ruthenium traces in the range of 0.1–10 μg per gram emulsion. The detection limits obtained were 4 ng/g for ICP-IDMS, 20 ng/g for NTI-IDMS, and 15 ng/g for ICP-MS with external calibration. Differences in the results between the different methods could mainly be attributed to sample inhomogeneities. ICP-IDMS with silver matrix reduction by AgCl precipitation is recommended as a routine method, NTI-IDMS with the corresponding sample treatment as a calibration method.     

Accurate determination of element species by on-line coupling of chromatographic systems with ICP-MS using isotope dilution technique

The instrumental design for coupling different liquid chromatographic systems such as ion, reversed phase, and size exclusion chromatography as well as capillary gas chromatography, with ICP-MS for the determination of element species is described. For accurate analyses obtaining ‘real time’ concentrations of chromatographic peaks, the isotope dilution mass spectrometric (IDMS) technique is applied. Two different spiking modes are possible, one using species-specific and another one using species-unspecific spike solutions of isotope-enriched labelled compounds. The species-specific mode is only possible for element species well defined in their structure and composition, for example iodate or selenite, whereas the species-unspecific mode must be applied in all cases where the structure and composition of the species is unknown, for example, for metal complexes with humic substances. For accurate determinations by the isotope dilution technique the mass discrimination effect must also be taken into account. Iodate, iodide and organoiodine species, including those of humic substances, have been analysed in mineral, drinking and environmental water samples by coupling different liquid chromatographic methods with ICP-IDMS. Heavy metal complexes with humic substances in water samples of different origin have been characterized by size exclusion/ICP-IDMS. The possibilities of determining different environmental selenium species are discussed and the results for the analysis of selenite and selenate, which has been carried out by GC/ICP-IDMS after converting these species into a volatile piazselenol compound, are presented.     

Ultra-trace analysis of U,Th, Ca and selected heavy metals in high purity refractory metals with isotope dilution mass spectrometry

A method for the determination of trace impurities (U, Th, Ca, Fe, Cr, Ni, Cu, and Cd) in the refractory metals molybdenum and tungsten with isotope dilution mass Spectrometry (IDMS) has been developed. This method enables determinations of uranium and thorium down to the lowest pg/g level with high precision and accuracy. Selective chromatographic, extractive and electrolytic methods for the trace-matrix separation were combined with positive thermal ionization mass spectrometry. Different samples of high purity (4N) and of ultra high purity (UHP) materials for advanced technologies were analysed. The detection limits reached are (in ng/g): U 0.006, Th 0.008, Ca 10, Fe 19, Cr 0.5, Ni 0.6, Cu 2.7, and Cd 0.12. A comparison of results with other sensitive analytical methods (ICP-MS, GDMS, SIMS) makes obvious the urgent necessity of a reliable calibration method like IDMS because the analytical results obtained by the other methods often spread over a wide range.     

SI-traceable certification of the amount content of cadium below the ng g(-1) level in blood samples by isotope dilution ICP-MS applied as a primary method of measurement

The development and implementation of a method for the certification of cadmium in blood samples at low ng g(-1) and sub ng g(-1) levels is described. The analytical procedure is based on inductively coupled plasma isotope dilution mass spectrometry (ICP-IDMS) applied as a primary method of measurement. Two different sample digestion methods, an optimized microwave digestion procedure using HNO3 and H2O2 as oxidizing agents and a high-pressure asher digestion procedure, were developed and compared. The very high salt content of the digests and the high molybdenum content, which can cause oxide-based interferences with the Cd isotopes, were reduced by a chromatographic matrix separation step using an anion-exchange resin. All isotope ratio measurements were performed by a quadrupole ICP-MS equipped with an ultrasonic nebulizer with membrane desolvator. This sample introduction set-up was used to increase sensitivity and minimize the formation of oxides (less MoO+ interference with the Cd isotopes). Because of the very low Cd concentrations in the samples and the resulting need to minimize the procedural blank as much as possible, all sample-processing steps were performed in a clean room environment. Detection limits of 0.005 ng g(-1) Cd were achieved using sample weights of 2.7 g. The method described was used to recertify the cadmium content of three different blood reference materials from the Community Bureau of Reference (BCR) of the European Commission (BCR-194, BCR-195, BCR- 196). Cadmium concentrations ranged between approximately 0.2 ng g(-1) and approximately 12 ng g(-1). For these materials, SI-traceable certified values including total uncertainty budgets according to ISO and Eurachem guidelines were established.     

Isotope dilution mass spectrometry of microelectronically relevant heavy metal traces in high-purity cobalt

Summary Because cobalt and its silicides are increasingly used in microelectronic devices, an isotope dilution mass spectrometric (IDMS) method has been developed for trace analysis of relevant heavy metals (U, Th, Fe, Zn, Tl, and Cd) in high-purity cobalt. The measurements of the isotope ratios were carried out with a small thermal ionization quadrupole mass spectrometer by producing positive thermal ions in a single- or double-filament ion source. For the trace/matrix separation and the isolation of the different heavy metals, anion-exchange chromatography and an extraction method for iron were applied. The detection limits obtained were (in ng/g): U=0.007, Th=0.017, Tl=0.06, Cd=1, Zn=8, and Fe=11, which demonstrates that the particularly critical radioactive impurities uranium and thorium could be analysed down to the low pg/g range. Three cobalt samples of different purity were analysed with concentrations ranging from about 0.1 ng/g for U and Th in an ultra high-purity material produced for microelectronic purposes, up to about 70 g/g for Cd in a cobalt sample with declared purity of 99.8%. Because IDMS usually results in accurate analytical results, it can be used in the future for calibration of other methods like glow discharge mass spectrometry, as could be shown by analysing one cobalt sample by both methods. IDMS can also be applied for the production of urgently needed certified standard reference materials in this important field of high technology.Presented at the ANAKON '93 conference     

Producing SI-traceable reference values for Cd, Cr and Pb amount contents in polyethylene samples from the Polymer Elemental Reference Material (PERM) project using isotope dilution mass spectrometry

 The present paper describes the certification of the amount content of Cd, Cr and Pb in two different polyethylene materials within the third phase of the Polyethylene Elemental Reference Material (PERM) project. The analytical procedure to establish the reference values for Cd, Cr and Pb amount contents in these materials is based on isotope dilution mass spectrometry used as a primary method of measurement. Cd and Pb were measured with inductively coupled plasma-mass spectrometry and Cr with positive thermal ionization-mass spectrometry. The decomposition of the polymer matrix was carried out using a high pressure asher. Reference values for amount content, traceable to the SI-system, have been obtained for these three elements in both of the polyethylene samples of PERM. For each of the certified amount content values an uncertainty budget was calculated using the method of propagation of uncertainties according to ISO and EURACHEM guidelines. The measurement procedures, as well as the uncertainty calculations, are described for all three elements. In order to keep the whole certification process as transparent as possible, the preparations of various reagents and materials as well as the sample treatment and blending are described in detail. The mass spectrometry measurements and the data treatment are also explained carefully. The various sources of uncertainty present in the procedure are displayed in the uncertainty budgets. The obtained combined uncertainties for the amount content values were less than 2% relative (k=1) for all investigated elements. The amount contents were in the μmol/kg range, corresponding to mg/kg levels. Received: 21 October 1999 / Accepted: 29 January 2000     

Development of an accurate,sensitive, and robust isotope dilution laser ablation ICP-MS method for simultaneous multi-element analysis (chlorine,sulfur, and heavy metals) in coal samples

A method for the direct multi-element determination of Cl, S, Hg, Pb, Cd, U, Br, Cr, Cu, Fe, and Zn in powdered coal samples has been developed by applying inductively coupled plasma isotope dilution mass spectrometry (ICP-IDMS) with laser-assisted introduction into the plasma. A sector-field ICP-MS with a mass resolution of 4,000 and a high-ablation rate laser ablation system provided significantly better sensitivity, detection limits, and accuracy compared to a conventional laser ablation system coupled with a quadrupole ICP-MS. The sensitivity ranges from about 590 cps for ³⁵Cl⁺ to more than 6 × 10⁵ cps for ²³⁸U⁺ for 1 μg of trace element per gram of coal sample. Detection limits vary from 450 ng g⁻¹ for chlorine and 18 ng g⁻¹ for sulfur to 9.5 pg g⁻¹ for mercury and 0.3 pg g⁻¹ for uranium. Analyses of minor and trace elements in four certified reference materials (BCR-180 Gas Coal, BCR-331 Steam Coal, SRM 1632c Trace Elements in Coal, SRM 1635 Trace Elements in Coal) yielded good agreement of usually not more than 5% deviation from the certified values and precisions of less than 10% relative standard deviation for most elements. Higher relative standard deviations were found for particular elements such as Hg and Cd caused by inhomogeneities due to associations of these elements within micro-inclusions in coal which was demonstrated for Hg in SRM 1635, SRM 1632c, and another standard reference material (SRM 2682b, Sulfur and Mercury in Coal). The developed LA-ICP-IDMS method with its simple sample pretreatment opens the possibility for accurate, fast, and highly sensitive determinations of environmentally critical contaminants in coal as well as of trace impurities in similar sample materials like graphite powder and activated charcoal on a routine basis. Figure LA-ICP-IDMS allows direct multi-element determination in powdered coal samples     

Definitive method certification of clinical analytes in lyophilized human serum: NIST Standard Reference Material (SRM) 909b

The National Institute of Standards and Technology (NIST) has developed several Standard Reference Materials (SRMs) based on human serum. NIST SRM 909b, Human Serum, is a lyophilized human serum material with concentrations for seven organic and six inorganic analytes at two levels certified solely by definitive methods (DMs). This material provides the vehicle by which high precision, high accuracy measurements made with DMs at NIST can be transferred through the measurement hierarchy to other laboratories. Isotope dilution gas chromatographic-mass spectrometric (GC-IDMS) methods were applied to measure cholesterol, creatinine, glucose, urea, uric acid, triglycerides, and total glycerides. Thermal ionization isotope dilution mass spectrometry (TI-IDMS) was used for determination of lithium, magnesium, potassium, calcium, and chloride. In addition, chloride was determined by coulometry, providing a comparison between two DMs. Sodium, which lacks a stable isotope that would permit isotope dilution mass spectrometric (IDMS) measurement, was determined by gravimetry. SRM 909b includes certified values for total glycerides and triglycerides, which were not certified in the previous lot of this material (SRM 909a). Improvement in uniformity of vial fill weight in the production of SRM 909b resulted in smaller certified uncertainties over previous freeze-dried serum SRMs. Uncertainties at the 99% level of confidence for relative expanded uncertainty (%) for certification of the organic analytes on a mmol/L/g basis ranged from 0.44% for urea (level II) to 5.04% for glucose (level II). (In-house studies have shown glucose to be a relatively unstable analyte in similar lyophilized serum materials, degrading at about 1% per year.) Relative expanded uncertainties (99% C.I.) for certification of inorganic analytes on a mmol/L/g basis ranged from 0.25% for chloride (level I) to 0.49% for magnesium (level II). Received: 30 July 1997 / Revised: 24 October 1997 / Accepted: 31 October 1997