Synthesis of polystyrene nanoparticles “armoured” with nanodimensional graphene oxide sheets by miniemulsion polymerization

Polystyrene particles “armoured” with nanosized graphene oxide (GO) sheets have been prepared by aqueous miniemulsion polymerization of styrene, exploiting the amphiphilic properties of GO in the absence of conventional surfactants. The nanoscale GO sheets were prepared from graphite nanofibers of diameter approximately 100 nm based on a novel procedure, thus effectively ensuring the absence of larger sheets. Polymerization proceeded to high conversion with minor coagulation, with final number‐average particle diameters of approximately 500 nm, but relatively broad particle size distributions. Scanning electron microscopy analysis revealed particles with a textured surface, consistent with the expected morphology. Interestingly, analysis of GO sheets recovered from the polymerization revealed that the GO sheets are partially reduced during the polymerization—approximately 50% of the initial carboxyl groups of the GO were lost, consistent with some loss in colloidal stability at high conversion. The overall approach offers a convenient and attractive synthetic route to novel graphene‐based polymeric nanostructures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Thermal conductive PS/graphite composites

Polystyrene (PS) was compounded with graphite that possesses high thermal conductivity and layer structures, and the PS/graphite thermal conductive nano‐composites were prepared. Thermal conductivity of PS improved remarkably in the presence of the graphite, and a much higher thermal conductivity of 1.95 W/m K can be achieved for the composite with 34 vol% of colloidal graphite. The Maxwell‐Eucken model and the Agari model were used to evaluate the thermal conductivity of the composites. For the purpose of improving the interfacial compatibility of PS/graphite, realizing the exfoliation and nano‐dispersion of graphite in the PS matrix, three intercalation methods, including rolling intercalation, solvent intercalation, and pan milling intercalation, were applied to prepare the composites, and the morphologies, thermal conductivities, and mechanical properties of the composites were investigated. It should be noted that the one prepared by pan milling intercalation not only had excellent thermal conductivity but also much higher mechanical properties, resulting from a high degree of layer exfoliation of the graphite, the formation of the chain structure agglomerates of the graphite, and the creation of more conductive paths under the strong shear stress of pan milling. Copyright © 2008 John Wiley & Sons, Ltd.     

A Review on Graphene Oxide Two-dimensional Macromolecules: from Single Molecules to Macro-assembly

Graphene oxide(GO), which consists of two-dimensional(2 D) sp2 carbon hexagonal networks and oxygen-contained functional groups, has laid the foundation of mass production and applications of graphene materials. Made by chemical oxidation of graphite, GO is highly dispersible or even solubilized in water and polar organic solvents, which resolves the hard problem of graphene processing and opens a door to wet-processing of graphene. Despite its defects, GO is easy to functionalize, dope, punch h...     

PS colloidal particles stabilized by graphene oxide

Exfoliated graphene oxide (GO) sheets with hydrophilic functional groups on the surface were prepared by the oxidation of graphite. Because of the hydrophilic groups on the sheets and the hydrophobic carbon surface, GO sheets were located at the oil-water interface and could be used as a stabilizer in Pickering emulsions. After the Pickering emulsion polymerization of styrene, PS colloidal particles with GO sheets on the surface were prepared. The size of the GO sheets exerts an important influence on the preparation of PS colloidal particles. Small GO sheets located at the liquid-liquid interface and GO-stabilized PS colloidal particles were prepared; however, for large GO sheets, smaller PS colloidal particles prepared on the GO surface were observed. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used to characterize the structure and morphology of the colloidal particles. TEM, SEM, and XPS results all suggest the successful preparation of GO-stabilized PS colloidal particles.     

Ozonated Graphene Oxide Film as a Proton‐Exchange Membrane

Graphene oxide (GO) contains several chemical functional groups that are attached to the graphite basal plane and can be manipulated to tailor GO for specific applications. It is now revealed that the reaction of GO with ozone results in a high level of oxidation, which leads to significantly improved ionic (protonic) conductivity of the GO. Freestanding ozonated GO films were synthesized and used as efficient polymer electrolyte fuel cell membranes. The increase in protonic conductivity of the ozonated GO originates from enhanced proton hopping, which is due to the higher content of oxygenated functional groups in the basal planes and edges of ozonated GO as well as the morphology changes in GO that are caused by ozonation. The results of this study demonstrate that the modification of dispersed GO presents a powerful opportunity for optimizing a nanoscale material for proton‐exchange membranes.     

一步法制备还原态氧化石墨烯载铂纳米粒子及其对甲醇氧化的电催化性能

以天然石墨为原料,采用改进的Hummers法制备氧化石墨.然后采用简单的一步化学还原法在乙二醇(EG)中同时还原氧化石墨烯(GO)和H₂PtCl₆制备高分散的铂/还原态氧化石墨烯(Pt/RGO)催化剂.采用傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)和透射电子显微镜(TEM)对催化剂的微结构、组成和形貌进行表征.结果表明, GO已被还原成RGO, Pt纳米粒子均匀分散在RGO表面,粒径约为2.3 nm.采用循环伏安法和计时电流法评价催化剂对甲醇氧化的电催化性能,测试结果表明, Pt/RGO催化剂对甲醇氧化的电催化活性和稳定性与Pt/C和Pt/CNT相比有了很大提高.另外其对甲醇电催化氧化的循环伏安图中正扫峰电流密度(I_f)和反扫峰电流密度(I_b)的比值高达1.3,分别是Pt/C和Pt/CNT催化剂的2.2和1.9倍,表明Pt/RGO催化剂具有高的抗甲醇氧化中间体CO_ad的中毒能力.     

Preparation and Optimization of PEGylated Nano Graphene Oxide-Based Delivery System for Drugs with Different Molecular Structures Using Design of Experiment (DoE)

Graphene oxide (GO), due to its 2D planar structure and favorable physical and chemical properties, has been used in different fields including drug delivery. This study aimed to investigate the impact of different process parameters on the average size of drug-loaded PEGylated nano graphene oxide (NGO-PEG) particles using design of experiment (DoE) and the loading of drugs with different molecular structures on an NGO-PEG-based delivery system. GO was prepared from graphite, processed using a sonication method, and functionalized using PEG 6000. Acetaminophen (AMP), diclofenac (DIC), and methotrexate (MTX) were loaded onto NGO-PEG particles. Drug-loaded NGO-PEG was then characterized using dynamic light scattering (DLS), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), XRD. The DLS data showed that the drug-loaded NGO-PEG suspensions were in the size range of 200 nm–1.3 µm. The sonication time and the stirring rate were found to be the major process parameters which affected the average size of the drug-loaded NGO-PEG. FTIR, DSC, XRD, and SEM demonstrated that the functionalization or coating of the NGO occurred through physical interaction using PEG 6000. Methotrexate (MTX), with the highest number of aromatic rings, showed the highest loading efficiency of 95.6% compared to drugs with fewer aromatic rings (diclofenac (DIC) 70.5% and acetaminophen (AMP) 65.5%). This study suggests that GO-based nano delivery systems can be used to deliver drugs with multiple aromatic rings with a low water solubility and targeted delivery (e.g., cancer).     

An Effective Method for Bulk Obtaining Graphene Oxide Solids

We report an effective method for bulk obtaining exfoliated graphene oxide (GO) solids from their aqueous solutions, which were prepared from nature graphite by an oxidation method. Tyndall effect proved that GO solution has a colloidal nature. Different flocculants were used to coagulate GO colloidal, and it was found that NaOH had the most obvious coagulation effect to GO. Transmission electron microscopy, X‐ray diffraction and atomic force microscopy analysis demonstrated that there were a large number of complete few‐layer GO sheets with thickness of about 0.8 nm, and the surfaces were very smooth, almost free of impurities. Liquid state ¹³C NMR and Fourier transformation infrared spectra showed the presence of abundant benzene carboxylic, hydroxyl and epoxide groups in the basal planes of GO. The graphene materials reduced from GO solids had good electrical conductivity. Our work explored a simple and effective route to extract GO from their solution, which is the most important to GO and graphene researches and applications.     

Superhydrophobic bionic surfaces with hierarchical microsphere/SWCNT composite arrays

Superhydrophobic bionic surfaces with hierarchical micro/nano structures were synthesized by decorating single-walled or multiwalled carbon nanotubes (CNTs) on monolayer polystyrene colloidal crystals using a wet chemical self-assembly technique and subsequent surface treatment with a low surface-energy material of fluoroalkylsilane. The bionic surfaces are based on the regularly ordered colloidal crystals, and thus the surfaces have a uniform superhydrophobic property on the whole surface. Moreover, the wettability of the bionic surface can be well controlled by changing the distribution density of CNTs or the size of polystyrene microspheres. The morphologies of the synthesized bionic surfaces bear much resemblance to natural lotus leaves, and the wettability exhibited remarkable superhydrophobicity with a water contact angle of about 165 degrees and a sliding angle of 5 degrees.     

Adsorption characteristics of nanoporous carbon-silica composites synthesized from graphite oxide by a mechanochemical intercalation method

Nanoporous carbon-silica composites were synthesized from graphite oxide (GO) precursor by a mechanochemical intercalation (MCI) method at different conditions, and their structural property, thermal decomposition behaviors, and adsorption characteristics were examined. MCI method yields regular tetraethoxysilane (TEOS)-intercalated GO layer structures with controllable silicon content depending on the TEOS addition. Adsorption behaviors of water and hexane indicate the amphiphilic properties of the composites. The detailed porosities of the composites and their changes upon water adsorption were analyzed on the basis of alpha(s)-plot method of N(2) adsorption isotherms using a weight-averaged standard data from non-porous silica and non-porous carbon, which plausibly divides microporosity and mesoporosity.     

Site-specific functionalization on individual colloids: size control, stability, and multilayers

Individual colloidal particles are locally functionalized with nanoscale control. Here we use the particle lithography technique to mask one region of a silica or polystyrene particle (size 3.0 mum down to 170 nm), while the remaining 95% or more of the particle is coated with various sized nanocolloids. The images and data show precise and predictable control over the size of the region, with fine-tuned patch size control obtainable by changing the ionic strength of the solution. The coating on the particles remains stable even when subjected to sonication for 5 min. Both single regions and multilayer annuluses are readily formed. Particle lithography provides a general, reliable, stable, controllable, and scalable method for placing site-specific functionalizations on individual particles, opening the way to more complex particle patterning and the bottom-up assembly of more complex structures.     

Graphene oxide improved thermal and mechanical properties of electrospun methyl stearate/polyacrylonitrile form-stable phase change composite nanofibers

In the present work, a novel PAN-based form-stable composite phase change materials with the methyl stearate (MES) encapsulated in the supporting matrices of polyacrylonitrile (PAN) nanofibers were fabricated through electrospunning for the storage and retrieval of thermal energy. Influences of graphene oxide (GO) addition on the chemical properties, structural morphologies, mechanical properties, thermal energy storage properties, thermal stability, and thermal energy storage/retrieval rates of electrospun MES/PAN/GO phase change composite nanofibers were systematically investigated by FT-IR, FE-SEM, tensile testing, DSC, TG, and measurement of melting/freezing times, respectively. The results revealed that the incorporation of GO effectively enhanced the mechanical properties, thermal stability, as well as heat storage and release rates of the phase change composite nanofibers. The averaged tensile strength of electrospun MES/PAN/GO phase change composite nanofibers increased significantly by 573 % with 10 mass% loading of GO, while elongation at break had a maximum 107 % increment when adding 3 mass% of GO. The DSC results indicated that the electrospun PAN-based phase change composite nanofibers with various GO loadings had suitable phase transition temperatures with the latent heat ranging from about 92 to 109 kJ kg^?1 and exhibited good thermal reliability in terms of DSC measurements during 50 melting-freezing cycles. Moreover, the melting and freezing time were significantly decreased about 44 and 43 % for the MES/PAN/GO5, as well as 59 and 64 % for the MES/PAN/GO10 after introducing the GO into the composite nanofibers systems.     

Tailoring thermal conductivity of bulk graphene oxide by tuning the oxidation degree

The thermal conductivity of graphene oxides can be tailored by tuning oxidation degree due to the introduction of atomic- and nano-scale phonon scattering centers.     

Steric‐Structure‐Dependent Gel Formation,Hierarchical Structures,Rheological Behavior,and Surface Wettability

A series of bicholesteryl‐based gelators with different central linker atoms C, N, and O (abbreviated to GC , GN , and GO , respectively) have been designed and synthesized. The self‐assembly processes of these gelators were investigated by using gelation tests, field‐emission scanning electron microscopy, field‐emission transmission electron microscopy, UV/Vis absorption, IR spectroscopy, X‐ray diffraction, rheology, and contact‐angle experiments. The gelation ability, self‐assembly morphology, rheological, and surface‐wettability properties of these gelators strongly depend on the central linker atom of the gelator molecule. Specifically, GC and GN can form gels in three different solvents, whereas GO can only form a gel in N,N‐dimethylformamide (DMF). Morphologies from nanofibers and nanosheets to nanospheres and nanotubes can be obtained with different central atoms. Gels of GC , GN , and GO formed in the same solvent (DMF) have different tolerances to external forces. All xerogels gave a hydrophobic surface with contact angles that ranged from 121 to 152°. Quantum‐chemical calculations indicate that the GC , GN , and GO molecules have very different steric structures. The results demonstrate that the central linker atom can efficiently modulate the molecular steric structure and thus regulate the supramolecular self‐assembly process and properties of gelators.     

Microstructural evolution and mechanical investigation of hot stretched graphene oxide reinforced polyacrylonitrile nanofiber yarns

To reveal the enhancement effect of graphene oxide (GO) in polymer nanofiber yarns, polyacrylonitrile (PAN)/GO nanofibers with different GO content (0.1‐0.5 wt%) were electrospun. The alignment of PAN chains and GO in nanofibers was enhanced by hot stretching of the yarn in dry conditions. The microstructure of the composite nanofiber yarns was investigated through X‐ray diffraction, polarized Fourier transform infrared spectroscopy and transmission electron microscopy. The results demonstrated that the hot stretching above T_g of PAN precursor lead to the increased orientation‐induced crystallization and alignment of PAN chain and GO. The yarn with 0.1 wt% GO and stretched by 4 times its length obtained the highest strength and modules (310.88 ± 24.68 MPa and 7.24 ± 0.55 GPa), which were 600% and 500% higher than those of the as‐electrospun pure PAN yarn. The most promising tensile properties found in hot stretched yarns with low GO content was because the strong interaction occurred between PAN molecules and oxygen‐containing functional groups. Indirect evidence of GO aggregation was also presented, which adversely affected the mechanical properties at higher GO content. Composite nanofiber yarns were sewable and weavable, and could be used as a new generation of composite reinforcement after pyrolysis.     

Polymer/graphite nanocomposites: Effect of reducing the functional groups of graphite oxide on water barrier properties

Water barrier properties (i.e., water resistance) of poly(styrene-co-butyl acrylate)/graphite oxide (poly(St-co-BA)/GO) nanocomposites were studied using hydrophobicity and permeability analysis. Poly(St-co-BA)/GO nanocomposite latices were obtained using the miniemulsion polymerization technique. The hydrophobicity of the synthesized nanocomposites was studied using contact angle measurements, while water permeability was obtained by measuring the moisture vapor transmission rate (MVTR). The nanocomposites were treated with hydrazine hydrate in order to reduce the functional groups on graphite oxide (GO). The focus was on determining the effect of reducing the functional groups of GO on the water barrier properties of its polymer nanocomposites. In general, the nanolayered graphene platelets in GO and RGO resulted in lower water permeation in the final films compared to pure polymer. However, results showed that nanocomposites containing the reduced-GO (RGO) had better water resistance and barrier properties compared to those made with unreduced GO (i.e., as-prepared GO). The nanocomposites containing RGO had higher hydrophobicity and lower water uptake and MVTR compared to those made with as-prepared GO, resulting in better barrier performance. This was attributed to the high hydrophobic nature of the RGO, which exhibited lower water solubility that resulted in films with lower MVTR values compared to those made with as-prepared GO.     

Effect of electrostatic forces control on the structure and properties of polyaniline/graphene oxide nanocomposite

The effects of electrostatic forces (EF), control on the morphology, structure, and electrochemical properties of polyaniline, PANI/graphene oxide (GO), nanocomposites prepared by interfacial electropolymerization (IEP), are studied in this work. FESEM images showed that the IEP method can form the PANI/GO nanocomposites when the EF-control has been found mainly on the PANI nanofibers formation and growth on the GO film surface; and the EF-enhancement can form PANI nanofibers with small nano-diameter, longer length, uniform morphology, high order and well orientation as compared with the EF-reduction-formed sample. The EF-enhancement-formed PANI/GO nanocomposite showed improved electrochemical properties than that of the EF-reduction-formed sample due to the EF-enhancement that enhances the C–N structure for PANI/GO nanocomposite.     

竹节状纳米碳纤维的制备及嵌锂性能研究

以泡沫镍为催化剂,在600和700℃下,以CVD法热解乙炔气体制备大量的纳米碳纤维.随着制备温度增加,纳米碳纤维直径变小,竹节状含量减少, d002值减小,微晶片层平面Lc和La值增大,碳材料的可逆容量则下降.分别用透射电镜、 X射线衍射和拉曼光谱观察和测定了纳米碳纤维的形貌、微结构,发现在不同条件下生长的纳米碳纤维有不同的形貌和结构.对纳米碳纤维的电化学嵌锂性能的研究表明,纳米碳纤维的结构对其电化学嵌锂容量和充放电循环寿命起重要影响,制备温度越低,纳米碳纤维的石墨化程度越差,可逆嵌锂容量相应要高一些.     

The Route to Functional Graphene Oxide

We report on an easy‐to‐use, successful, and reproducible route to synthesize functionalized graphite oxide (GO) and its conversion to graphene‐like materials through chemical or thermal reduction of GO. Graphite oxide containing hydroxyl, epoxy, carbonyl, and carboxyl groups loses mainly hydroxyl and epoxy groups during reduction, whereas carboxyl species remain untouched. The interaction of functionalized graphene with fluorescent methylene blue (MB) is investigated and compared to graphite, fully oxidized GO, as well as thermally and chemically reduced GO. Optical absorption and emission spectra of the composites indicate a clear preference for MB interaction with the GO derivatives containing a large number of functional groups (GO and chemically reduced GO), whereas graphite and thermally reduced GO only incorporate a few MB molecules. These findings are consistent with thermogravimetric, X‐ray photoelectron spectroscopic, and Raman data recorded at every stage of preparation. The optical data also indicate concentration‐dependent aggregation of MB on the GO surface leading to stable MB dimers and trimers. The MB dimers are responsible for fluorescence quenching, which can be controlled by varying the pH value.     

Electrospun poly(3‐hexylthiophene)/poly(ethylene oxide)/graphene oxide composite nanofibers: effects of graphene oxide reduction

In this article, we report on the production by electrospinning of P3HT/PEO, P3HT/PEO/GO, and P3HT/PEO/rGO nanofibers in which the filler is homogeneously dispersed and parallel oriented along the fibers axis. The effect of nanofillers' presence inside nanofibers and GO reduction was studied, in order to reveal the influence of the new hierarchical structure on the electrical conductivity and mechanical properties. An in‐depth characterization of the purity and regioregularity of the starting P3HT as well as the morphology and chemical structure of GO and rGO was carried out. The morphology of the electrospun nanofibers was examined by both scanning and transmission electron microscopy. The fibrous nanocomposites are also characterized by differential scanning calorimetry to investigate their chemical structure and polymer chains arrangements. Finally, the electrical conductivity of the electrospun fibers and the elastic modulus of the single fibers are evaluated using a four‐point probe method and atomic force microscopy nanoindentation, respectively. The electrospun materials crystallinity as well as the elastic modulus increase with the addition of the nanofillers while the electrical conductivity is positively influenced by the GO reduction. Copyright © 2016 John Wiley & Sons, Ltd.