Novel drug delivery microspheres from poly(1,5-dioxepan-2-one-co-L-lactide)

Novel microspheres from copolymers of 1,5-dioxepan-2-one (DXO) and L -lactide (L -LA) were prepared by oil-in-water solvent evaporation and oil-in-oil solvent removal. The two preparation techniques were evaluated for sphere formulation and incorporation of two different drugs. Sustained release of these therapeutic substances was obtained. The consequences of altering the DXO : LA ratio, preparation method, and drug hydrophilicity were explored and identified as factors governing sphere quality, in vitro degradation, and drug release characteristics. We show that these relationships provide a powerful means of controlling the microsphere performance. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1877–1884, 1999     

Preparation and characterization of imprinted microspheres for clopyralid

In this work, the molecularly imprinted polymers (MIPs) and non-imprinted polymers (NIPs) for clopyralid (3,6-DCP) were successfully synthesized via precipitation polymerization using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EGDMA) as crosslinker and a mixture of butanone (MEK) and n-heptane as porogen under the existence of azobisisobutyronitrile (AIBN). The morphologies, particle sizes, structures, adsorption properties and selective recognitions of polymers were investigated systematically. The average particle sizes of MIP3 and NIP3 were 2.76 μm and 2.15 μm. The apparent maximum binding amount (Q_max) of MIP3 and NIP3 were 67.50 mg·g^?1 and 65.02 mg·g^?1 in Scatchard analysis. Langmuir isotherm displayed that the Langmuir constant (K_l) of MIP3 and NIP3 were 0.015 L·mg^?1 and 0.0065 L·mg^?1, the saturation adsorption capacity (Q_max) of MIP3 and NIP3 were 63.23 mg·g^?1 and 58.17 mg·g^?1. Lagergren pseudo-second-order kinetic plot described that the adsorption process of MIP3 was visualized as chemical absorption. Selectivity analysis revealed that MIP3 possessed highly specific recognition for 3,6-DCP.     

Electrospun nanofibers for drug delivery applications: Methods and mechanism

Electrospinning procedures such as blend electrospinning, coaxial electrospinning, and emulsion electrospinning have been used for the fabrication of electrospun nanofibers (ENFs) for biomedical applications. These ENFs are attracted great interest especially in drug delivery applications due to their small size, high surface area-to-volume, and porosity. The aim of this review is to focus on the controlled release mechanism among the different electrospinning methods, and the selectivity of hydrophilic, water-soluble polymers as a carrier for drug. The mechanism for the drug delivery depends mainly on the method of drug loading, polymeric interactions, and the nature of polymer swelling, erosion, or degradation. This review compressed on the literature survey about the fabrication of nanofibers by different electrospinning methods, factors affecting the nanofiber morphologies, selectivity of polymeric blends for successful controlled release behavior, and the mechanism involved in the drug release steps.     

Synthesis of hydrophilic microspheres with LCST close to body temperature for controlled dual‐sensitive drug release

Novel stimuli‐responsive hydrophilic microspheres were prepared by free radical polymerization of hydroxyethyl methacrylate (HEMA) and methacrylic acid (MA), as hydrophilic monomers, and N‐isopropylacrylamide (NIPAAm) and N,N′‐ethylenebisacrylamide (EBA), as thermo‐sensitive monomer and crosslinker, respectively. Hydrophilic comonomers were introduced in the macromolecular network to synthesize materials with tunable thermal behavior. In addition, by introducing in the polymerization feed both a hydrophilic and a pH‐sensitive monomer, such as MA, dual stimuli‐responsive (pH and temperature) hydrogels were synthesized. The incorporation of monomers in the network was confirmed by infrared spectroscopy, while the network density and the shape of hydrogels was found to strictly depend on the concentration of monomers in the polymerization feed. Thermal analyses showed negative thermo‐responsive behavior with pronounced water affinity of microspheres at a temperature lower than lower critical solution temperature (LCST). In our experiment, the LCST values of the hydrogels were in the range 34.6–37.5°C, close to the body temperature, and the amount of hydrophilic moieties in the polymeric network allows to collect shrinking/swelling transition temperatures higher than the LCST of NIPAAm homopolymers. In order to test the preformed materials as drug carriers, diclofenac diethylammonium salt (DDA) was chosen and drug entrapment percent was determined. Drug release profiles, in media at different temperature and pH, depend on hydrogels crosslinking degree and drug–bead interactions. By using semi‐empirical equations, the release mechanism was extensively studied and the diffusional contribute was evaluated. Copyright © 2010 John Wiley & Sons, Ltd.     

Progress on intelligent hydrogels based on RAFT polymerization: Design strategy,fabrication and the applications for controlled drug delivery

Although intelligent hydrogels have shown bright potential application in biomedical fields,they were prepared by conventional methods and still face many serious challenges,such as uncontrollable stimulus-response and low response sensitivity.Recently,RAFT polymerization provides a versatile strategy for the fabrication of intelligent hydrogels with improved stimulus-response properties,owing to the ability to efficiently construct hydrogel precursors with well-defined structure,such as block copolymer,graft copolymer,star copolymer.In this review,we summarized the recent progress on intelligent hydrogels based on RAFT polymerization with emphasis on their fabrication strategies and applications for controlled drug delivery.     

Synthesis and characterization of polyamine‐based cyclophosphazene hybrid microspheres

Starting with hexachlorocyclotriphosphazene (HCCP) and branched polyethylenimine (bPEI) crosslinked cyclomatrix polyphosphazene poly(HCCP‐co‐bPEI) microspheres are prepared by precipitation polymerization in acetonitrile at 50 °C under ultrasound irradiation. The influence of varying reagent ratios on the chemical composition, morphology, and physical and chemical properties of the microspheres is investigated. Furthermore, the microspheres are characterized by Fourier‐transform infrared spectroscopy, dynamic light scattering (DLS), X‐ray photoelectron spectroscopy, elemental analysis, as well as ³¹P MAS NMR. FESEM and DLS analysis show microspheres of smooth and spherical shape which swell both in water and acetonitrile. The particle diameters in the dry state range from 0.4 to 0.9 μm, but due to swelling a size increase between 45 and 140% is observed depending on the chemical composition and the solvent medium. The thermal stability of the microspheres ranges from 262 to 351 °C. The presence of reactive amine groups on the surface is proven by electrophoretic mobility measurements and chemical modification with two model compounds. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 527–536     

Synthesis and characterization of novel carboxymethyl chitosan grafted polylactide hydrogels for controlled drug delivery

Novel carboxymethyl chitosan‐polylactide (CMCS‐g‐PLA) hydrogels were prepared by using 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride/N‐hydroxysuccinimide (EDC/NHS) as crosslinking agent and catalyst at room temperature. Solid‐state ¹³C‐NMR, SEM, and FT‐IR measurements showed that PLA blocks are successfully grafted onto the CMCS main chains. DSC measurements confirmed the effective crosslinking of carboxymethyl chitosan. With increasing the amount of EDC/NHS, the crosslink destiny of CMCS‐g‐PLA copolymers is improved. The swelling ratio of CMCS‐g‐PLA hydrogels is pH dependent, showing a minimum in the pH range of 3 to 5. Rheological studies confirmed the formation of hydrogels. The higher the crosslinking density, the higher the storage modulus of hydrogels. CMCS‐g‐PLA hydrogels only slightly degrade in PBS for 10 days. In the presence of lysozyme, however, hydrogels with low crosslink density are totally degraded in 10 days. Drug release studies show that after 96 h, 95% of thymopentin is released under in vitro conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

One-pot synthesis of PDMAEMA nanocapsules for controlled release of hydrophobic cargo

In this work, poly((N,N-dimethyl amino)ethyl methacrylate) (PDMAEMA) homopolymers are synthesized using RAFT technique, which is then used as stabilizers to prepare miniemulsion droplets in a toluene/hexadecane(HD)/1,2-Bis-(2-iodoethyl)ethane(BIEE)/hydrophobic molecule/water mixture. Upon the reaction between BIEE and the stabilizers of miniemulsion droplets, the polymeric nanocapsules are formed and capable of encapsulating hydrophobic molecule in their oil core in one-step reaction. The release of hydrophobic cargo from the nanocapsules can be controlled by the variation of amount of surfactant (Tween®20) in the release medium and a long duration sustained release was achieved.     

Mesoporous materials for drug delivery

Research on mesoporous materials for biomedical purposes has experienced an outstanding increase during recent years. Since 2001, when MCM-41 was first proposed as drug-delivery system, silica-based materials, such as SBA-15 or MCM-48, and some metal-organic frameworks have been discussed as drug carriers and controlled-release systems. Mesoporous materials are intended for both systemic-delivery systems and implantable local-delivery devices. The latter application provides very promising possibilities in the field of bone-tissue repair because of the excellent behavior of these materials as bioceramics. This Minireview deals with the advances in this field by the control of the textural parameters, surface functionalization, and the synthesis of sophisticated stimuli-response systems.     

Hydrophilic polymer drug from a derivative of salicylic acid: synthesis, controlled release studies and biological behavior

Hydrophilic polymeric drugs bearing "Triflusal" (4-trifluoromethylsalicylic acid), a drug widely used as antithrombogenic agent (Disgren), have been prepared by free radical copolymerization of methacryloyloxyethyl [2-(acetyloxy)-4-(trifluoromethyl)] benzoate (HTRF) and N,N'-dimethylacrylamide (DMA). The reactivity ratios of both monomers have been determined by 1H NMR spectra by applying non-linear least square treatments to the copolymerization equation (terminal model), and the kinetic parameters obtained indicated that the microstructure of copolymer chains is homogeneous, with a random distribution of the active HTRF units along the copolymer chains. That means that for the copolymer system THDMA22 used in this work, HTRF units are mainly isolated in relatively long DMA sequences. Therefore, in this structure the intramolecular interactions between adjacent HTRF units are negligible. Release of Triflusal from THDMA22 has been studied in vitro using buffered solutions at pH = 2, 7.4 and 10 and 37 degrees C. The system showed an interesting pseudo-zero order release profile at pH = 7.4 during several months. It has been also evaluated the pharmacological activity and the behavior of the system in contact with biological media. In this sense, we have carried out some in vitro studies about the antiaggregant properties and biocompatibility of THDMA22. Results demonstrate that this copolymer inhibits platelet aggregation in its macromolecular form and presents a good biocompatibility with Human Osteoblastic Cells (HOS).     

Chemical synthesis of MnFe2O4/chitosan nanocomposites for controlled release of ofloxacin drug

In this study, we synthesized ofloxacin‐loaded MnFe₂O₄ nanoparticles (NPs) surface modified with chitosan (CS‐MnFe₂O₄) for prolonged antibiotic release in a controlled manner. It was found that the synthesized CS‐MnFe₂O₄ was spherical in shape with an average size of 30–50 nm, low aggregation, and good magnetic responsibility. An in vitro drug loading and release kinetics study reveals that the drug delivery system can take 86% of drug load and can release ofloxacin over a sustained period of 3 days. The release kinetics study reveals that the drug follows zero order kinetics and the mechanism of drug release is diffusion‐controlled type. These results indicated that CS‐MnFe₂O₄ NPs with pH‐sensitive properties can be used as candidates for intestinal targeted drug delivery through oral administration by avoiding the drug release in the highly acidic gastric fluid region of the stomach.     

交联木薯淀粉微球的合成与表征

以木薯淀粉为原料,N,N′-亚甲基双丙烯酰胺(MBA)为交联剂,通过逆向悬浮聚合法合成交联木薯淀粉微球(CCSM).利用扫描电镜、傅里叶变换红外光谱、X射线粉末衍射对聚合物的结构进行了表征.同时实验考察了聚合反应工艺条件,研究了交联木薯淀粉微球对Fe3+的静态吸附行为.扫描电镜照片显示合成的交联木薯淀粉微球呈圆球形,表...     

Superparamagnetic pH‐sensitive multilayer hybrid hollow microspheres for targeted controlled release

The superparamagnetic multilayer hybrid hollow microspheres have been fabricated using the layer‐by‐layer assembly technique by the electrostatic interaction between the polyelectrolyte cation chitosan (CS) and the hybrid anion citrate modified ferroferric oxide nanoparticles (Fe₃O₄‐CA) onto the sacrificial polystyrene sulfonate microspheres templates after etching the templates by dialysis. The saturation magnetization and magnetite contents of the superparamagnetic multilayer hybrid hollow microspheres were 32.46 emu/g and 51.3%, respectively. The hybrid hollow microspheres showed pH‐sensitive characteristics. The adsorption and release of the basic dye (methylene blue) were applied to investigate the interaction between the amino groups of CS and the carboxyl groups of the Fe₃O₄‐CA nanoparticles in different pH media. The superparamagnetic pH‐sensitive multilayer hybrid hollow microspheres are expected to be used for the targeted controlled release of drugs or in diagnostics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3135–3144, 2010     

Sponge-like nanostructured conducting polymers for electrically controlled drug release

An electrically controlled drug release (ECDR) system based on sponge-like nanostructured conducting polymer (CP) polypyrrole (PPy) film was developed. The nanostructured PPy film was composed of template-synthesized nanoporous PPy covered with a thin protective PPy layer. The proposed controlled release system can load drug molecules in the polymer backbones and inside the nanoholes respectively. Electrical stimulation can release drugs from both the polymer backbones and the nanoholes, which significantly improves the drug load and release efficiency. Furthermore, with one drug incorporated in the polymer backbone during electrochemical polymerization, the nanoholes inside the polymer can act as containers to store a different drug, and simultaneous electrically triggered release of different drugs can be realized with this system.     

Synthesis,characterization and application of dummy-template molecularly imprinted microspheres for 2,4-d butyl ester

Dummy-template molecularly imprinted microspheres were synthesized via precipitation polymerization employing 2,4-D isooctyl ester as the template molecule instead of 2,4-D butyl ester, while methacrylic acid and divinylbenzene were used as functional monomer and cross-linker in acetonitrile or a mixture of acetonitrile and toluene. The microspheres were characterized by scanning electron microscopy, laser particle size analyzer and fourier transform infrared spectrometry. Binding capacity experiment showed that the molecularly imprinted polymers prepared in a mixture of acetonitrile and toluene had a high binding capacity. The performance of microspheres was further assessed by equilibrium binding and kinetic adsorption experiments. The results showed that the apparent maximum adsorption reached up to 1.35 mg·g^?1 within 10 min. Based on the dummy-template microspheres, a molecularly imprinted solid phase extraction-gas chromatography method was developed for the selective analysis of 2,4-D butyl ester in soil samples. The mean recoveries of 2,4-D butyl ester from blank soil samples ranged from 85.9 to 99.3% with relative standard deviations of 4.5–14.3% (n = 5). The limit of detection and the limit of quantification of 2,4-D butyl ester were 0.8 μg·kg^?1 and 2.3 μg·kg^?1, respectively.     

Synthesis and characterization of thermosensitive copolymers for oral controlled drug delivery

Poly(N-isopropylacrylamide) (PNIPAAm) copolymers were synthesized in order to obtain co-polymers with a phase transition temperature slightly higher than the physiological temperature, as required by a new drug delivery concept described in a previous paper. Six hydrophilic comonomers bringing about a rise of the phase transition temperature were evaluated. The synthesized copolymers were characterized and the influence of the type and of the amount of the used comonomer on the phase transition temperature was discussed. Among the comonomers, Acrylamide (AAm), N-methyl-N-vinylacetamide (MVA), N-vinylacetamide (NVA), and N-vinyl-2-pyrrolidinone (VPL) were found to be capable to raise the phase transition temperature to a value slightly higher than 37 °C and to have adequate phase transition behavior. The selected four copolymers were subjected to an additional purification step that should make them fit to use as a controlling agent in drug delivery systems.     

Amphiphilic poly(ethylene glycol)-b-poly(ethylene brassylate) copolymers: One-pot synthesis,self-assembly,and controlled drug release

A set of amphiphilic poly(ethylene glycol)-b-poly(ethylene brassylate) (PEG-b-PEB) copolymers based on the PEB hydrophobic block was first synthesized by ring-opening polymerization of ethylene brassylate with an organic catalyst. The EB/PEGmolar ratios and reaction times were adjusted to achieve different chain lengths of PEB. Block copolymers that were characterized by ¹H NMR and GPC could selfassemble into multimorphological aggregates in aqueous solution, which were characterized by DLS and TEM. The hydrophobic doxorubicin (DOX) was chosen as a drug model and successfully encapsulated into the nanoparticles. The release kinetics of DOX were investigated.     

Reparation of silica/poly(methacrylic acid)/poly(divinylbenzene-co-methacrylic acid) tri-layer microspheres and the corresponding hollow polymer microspheres with movable silica core

 Hollow poly(divinylbenzene-co-methacrylic acid) (P(DVB-co-MAA)) microspheres were prepared by the selective dissolution of the non-crosslinked poly(methacrylic acid) (PMAA) mid-layer in ethanol from the corresponding silica/PMAA/P(DVB-co-MAA) tri-layer hybrid microspheres, which were afforded by a three-stage reaction. Silica/PMAA core-shell hybrid microspheres were prepared by the second-stage distillation polymerization of methacrylic acid (MAA) via the capture of the oligomers and monomers with the aid of the vinyl groups on the surface of 3-(methacryloxy)propyl trimethoxysilane (MPS)-modified silica core, which was prepared by the Stöber hydrolysis as the first stage reaction. The tri-layer hybrid microspheres were synthesized by the third-stage distillation precipitation copolymerization of functional MAA monomer and divinylbenzene (DVB) crosslinker in presence of silica/PMAA particles as seeds, in which the efficient hydrogen-bonding interaction between the carboxylic acid groups played as a driving force for the construction of monodisperse hybrid microspheres with tri-layer structure. The morphology and the structure of silica core, silica/PMAA core-shell particles, the tri-layer hybrid microspheres and the corresponding hollow polymer microspheres with movable silica cores were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS).