Thermal stability and degradation of poly(N-(4-chlorophenyl) acrylamide) homopolymer and copolymer of N-(4-chlorophenyl) acrylamide with methyl methacrylate

Different concentrations of copolymer of (N-(4-chlorophenyl) acrylamide) (CA) with methyl methacrylate (MMA) were prepared and the reactivity ratio values of copolymerization were calculated using ¹H NMR technique. Thermal analysis of the copolymers showed that the thermal stability is intermediate between poly(N-(4-chlorophenyl) acrylamide) (PCA) and poly(methyl methacrylate) (PMMA) homopolymers. Thermal degradation products of the PCA were identified by GC–MS techniques. It seems that the mechanism of degradation of PCA homopolymer is characterized by free radical formation followed by recombination along the backbone chain. The activation energies of the thermal degradation of the copolymers were calculated using Arrhenius relationship.     

N-[4-(磺酰胺)苯基](甲基)丙烯酰胺的合成

以对氨基苯磺酰胺、丙烯酰氯(或甲基丙烯酰氯)为原料合成了N-[4-(磺酰胺)苯基]丙烯酰胺(ASPAA)和N-[4-(磺酰胺)苯基]甲基丙烯酰胺(ASPMAA),其结构经^1H NMR,IR和元素分析表征。合成ASPAA的最佳条件：对氨基苯磺酰胺13．76g(80mmol),n(对氨基苯磺酰胺)：n(丙烯酰氯)=1．0：1．1,n(丙烯酰氯)：n(NaHCO3)：1．00：1．14,0℃～2℃反应3h,反应液倾入10倍体积的的甲醇-水[V(甲醇)：V(水)=1：10]中析出产物,收率在60％以上。合成ASPMAA的最佳条件：对氨基苯磺酰胺6．88g(40mmol),n(对氨基苯磺酰胺)：n(甲基丙烯酰氯)=1.00：1．05,n(三己胺)：n(甲基丙烯酰氯)：1．0：1．0,在0℃～2℃滴加甲基丙烯酰氯后先在室温下反应1h,然后在60℃反应1h,反应液倾入700mL石油醚中析出产物,收率50％～60％．     

Determination of peimine and peiminine in Bulbus Fritillariae Thunbergii by capillary electrophoresis by indirect UV detection using N-(1-naphthyl)ethylenediamine dihydrochloride as probe

A simple and inexpensive CE method was developed for the determination of peimine and peiminine. Because of the lack of an UV chromophore of peimine and peiminine, the detection method chosen was indirect UV detection, with N‐(1‐naphthyl)ethylenediamine dihydrochloride (NED) as the UV absorbing probe. It was thought that NED, a chromophoric ion, may form hydrogen bonding pairs with the analytes to cause significant changes in separation selectivity. Additionally, the hydrophobic interactions between analytes and the probe also play a crucial role in achieving a resolution between the two analytes. The analyses were carried out with a background electrolyte composed of 66% MeOH–ACN (1:1, v/v), 34% aqueous buffer containing 15 mM NaH₂PO₄, 2.5 mM NED, 4 mM H₃PO₄. MeOH–ACN mixtures used as organic modifiers can not only reduce the adsorption of NED to the capillary wall, but also decrease the baseline noise and drift. The method provided a linear response ranging from 5 to 200 μg/mL. The limits of detection (LODs) for peimine and peiminine were 3.9 and 4.1 μg/mL, respectively. The repeatabilities (n = 3) reached relative standard deviation values (RSDs) of 3.4 and 4.1% for the peak areas, 4.0 and 4.4% for the peak heights, and 0.29 and 0.30% for the migration time of peimine and peiminine, respectively. Regression equations revealed linear relationships (r = 0.9995–0.9996) between the peak area of each analyte and the concentration. The method developed was successfully applied to quantify peimine and peiminine in chloroform extracts of the ground Bulbus Fritillariae Thunbergii.     

N-(1-萘基)琥珀酰亚胺玻璃态的晶化

采用X射线粉末衍射(XRD)和差示扫描量热分析(DSC)方法, 跟踪研究了N-(1-萘基)琥珀酰亚胺的液氮淬冷样品在室温(25 益)即在玻璃化转变温度以下的冷结晶行为. DSC和XRD的结果一致表明, 其冷结晶动力学曲线与熔融结晶完全不同, 呈现出“快-慢-快的三阶段增长趋势, 这一结果可以用低密度界面区成核和体积收缩效应给予解释.     

N-(1-萘基)琥珀酰亚胺分子间相互作用的计算机模拟

对分子间相互作用比较复杂的N-(1-萘基)琥珀酰亚胺进行理论计算时, 提出了将溶液构建和随机构象搜索相结合的多分子相互作用体系构建方法, 可以简单而准确地得到二聚体和三聚体结构, 其中二聚体结构和采用分子对接方法得到的结果完全一致. 经密度泛函理论计算, 得到了在真空条件下二聚体结构的最低能量构象. 对较大体系的三聚体结构采用高精度分子力学进行了理论计算. 通过分子间相互作用对分子构象的影响讨论了溶液结晶过程中N-(1-萘基)琥珀酰亚胺分子构象变化, 为该化合物结晶机理的深入研究提供重要依据.     

Microemulsion polymerization of acrylamide and styrene: Effect of the structures of reaction media

Isothermal phase diagrams of the system cetyltrimethylammonium bromide (CTAB)/n‐butanol/n‐octane/water were constructed, and the effect of the oil (n‐octane) contents on the microemulsions was studied at 40 °C. We determined the microemulsion structures of two systems, CTAB/n‐butanol/10% n‐octane/water and sodium dodecyl sulfonate (As)/n‐butanol/20% styrene/water, by conductivity measurements to investigate the polymerization of acrylamide and styrene in the two microemulsion systems. The polymerization kinetics of the water‐soluble monomer acrylamide in CTAB micelles and the different CTAB/n‐butanol/10% n‐octane/water microemulsion media [water‐in‐oil (W/O), bicontinuous (BC), and oil‐in‐water (O/W)] were studied with water‐soluble sodium bisulfite as the initiator. The maximum polymerization rate in CTAB micelles was found at the second critical micelle concentration. A mechanism of polyacrylamide formation and growth was proposed. A connection between the structures of the microemulsions and the polymerization rates was observed; the maximum polymerization rate occurred at two transition points, from W/O to BC and from BC to O/W, and the polyacrylamide molecular weights, which depended on the structures of the microemulsions, were also found. A square‐root dependence of the polymerization rates on the initiator concentrations was obtained in CTAB micelles and O/W microemulsion media. The polymerization of the oil‐soluble monomer styrene in different As/n‐butanol/20% styrene/water microemulsion media (W/O, BC, and O/W) was also investigated with different initiators: water‐soluble potassium persulfate and oil‐soluble azobisisobutyronitrile. A similar connection between the structures of the microemulsions and the conversions of styrene in CTAB/n‐butanol/10% n‐octane/water for the polymerization of acrylamide was observed again. The structures of the microemulsions had an important role in the molecular weights and sizes of polystyrene. The polystyrene particles were 10–20 nm in diameter in BC microemulsion media and 30–60 nm in diameter in O/W microemulsion media according to transmission electron microscopy. We determined the solubilization site of styrene in O/W microemulsion drops by ¹H NMR spectra to analyze the results of the microemulsion polymerization of styrene. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3320–3334, 2001     

Studies on LCST of poly （N-isopropylacrylamide-co-acrylic acid-co-N-diacetone acrylamide）

Linear copolymers from N-isopropylacrylamide(NIPA),acrylic acid(AA)and diacetone acrylamide(DAA)have been prepared. The effect of composition,ionic strength and pH on their lower critical solution temperature(LCST)has been investigated.     

N-(1-萘基)-琥珀酰亚胺化合物晶体结构的理论预测

用Materials Studio软件对N-(1-萘基)-琥珀酰亚胺多晶粉末的X射线衍射数据进行衍射峰指标化、晶胞参数优化和空间群搜索等理论计算, 可以确定晶体结构所属的晶系和空间群, 并初步给出和多晶粉末衍射数据相近的晶胞参数; 在已确定空间群范围内, 以密度泛函理论计算得到的最低能量构象作为初始分子结构, 对N-(1-萘基)-琥珀酰亚胺多晶进行晶体结构理论预测, 给出一系列假定的晶胞参数, 从中可以找到和经上述计算给出的晶胞参数一致的晶体结构；对其进行晶胞参数优化后, 得到晶体结构具有和多晶粉末X射线衍射数据相近的衍射曲线, 并与已有的单晶数据相吻合.     

聚N-对羟苯基丙烯酰胺与重氮树脂的氢键自组装

1991年 Decher[1] 首先从带相反电荷的聚电解质 ,通过静电相互作用在基片上交替沉积形成超薄膜 ,这种通过静电作用形成超薄膜的方法称为静电自组装 .与 L- B膜技术相比 ,静电自组装不需要专用设备 ,一般在水体系进行 ,无污染 .此外 ,静电力比形成 L- B膜的范德华力强 ,从而使其自组装膜比 L- B膜要稳定 .由于这些优点 ,静电自组装技术近年来得到迅速发展 [2～ 8] .通过氢键作用形成超薄膜的方法 (氢键自组装 )是最近才发展起来的技术 . 1 997年 ,沈家骢等 [9,10 ] 通过静电吸引和氢键组装了有序超薄膜 .几乎同时 ,Rubner等 [11] 报道从…     

木质素磺酸镁接枝丙烯酰胺的影响因素

天然高分子化合物木质素是木材水解工业和造纸工业的副产物。早期人们在研究纤维素同甲基丙烯酸甲酯、丙烯腈的接枝反应中时发现了木质素的接枝反应活性[1],Meisterh和Patil[2]则实现了将—CONH2接枝于木质素的设想,雷中方[3]等研究了木质素同具有较好吸附能力的—CONH2的接枝改性,并讨论了改性产物的水处理性能,他们所用的木质素是采用酸析法从碱法草浆黑液中提取的。本文以酸法制浆的红液 木素磺酸镁为原料,合成了木质素 丙烯酸胺接枝共聚物,并对接枝聚合过程中的引发体系、引发剂浓度、反应温度、木素与单体用量比、固液比等影…     

Detection and determination of certain ureas with o-phthalaldehyde and N-(1-naphthyl)-N'-diethylethylenediamine

o-Phthalaldehyde and N-(1-naphthyl)-N'-diethylethylenediamine give red or orange colours with urea and certain substituted ureas in dilute hydrochloric acid at 37 degrees . The reaction has good sensitivity and the colours are fairly stable. An individual urea can be detected at a concentration of ca. 0.05-0.2 mug/drop, and determined in the range of ca. 0.01-0.2 mumole.     

Trapping acrylamide by a Michael addition: A computational study of the reaction between acrylamide and niacin

Neurotoxic and carcinogenic acrylamide (ACR) is present in many food products. This finding spurred numerous studies for ACR scavengers. Niacin is putatively one of them because it reacts via Michael addition with ACR to form 1‐propanamide‐3‐carboxy pyridinium. Here, we study the mechanism and energetics of this reaction in aqueous solution by density functional theory. The CAM‐B3LYP and M06‐2X functionals with the 6‐31+G(d,p) basis set and implicit solvent were used. Single point calculations at the MP2 level with the same basis set were performed on optimized structures obtained at the M06‐2X level. Solvent effects comprehended both polarizable continuum model and solvation model density solvation models. The calculated NMR chemical shifts of 1‐propanamide‐3‐carboxy pyridinium are in agreement with experimental results. The theoretical study favors thermodynamically the formation of the adduct while the calculated activation energies turn out not to be too dissimilar from the ones measured for the alkylation reaction between ACR and 4(p‐nitrobenzyl)pyridine. © 2014 Wiley Periodicals, Inc.     

Effect of acrylamide concentration on the kinetics of oxidation of tartaric acid by cerium(IV) in sulfuric-perchloric acid media

The kinetics of oxidation of tartaric acid by Ce(IV) in the absence and presence of acrylamide has been investigated spectrophotometrically in aqueous H₂SO₄–HClO₄ media at a constant ionic strength 2.0M and 25°C. Oxidation of tartaric acid in both cases was first order with respect to Ce(IV). Kinetic data showed that the reaction involves the formation of an unstable complex and an intermediate free radical. The activation parameters were calculated to be E _a =91.3±0.4 kJ-mol^–1, S=20.2±1.0 J-mol^–1-K^–1, H=88.8±0.4 kJ-mol^–1. A polymerization mechanism is discussed.     

Theoretical modeling of the symmetric (C2v) electrophilic attachment of chlorine to ethylene in aqueous solution

The electrophilic attachment of chlorine to ethylene in aqueous solution is studied using the complete active space self‐consistent field (CASSCF) method combined with the polarizable continuum model in a version which includes electrostatic, repulsion, and dispersion solute–solvent interactions. The C_2v symmetry is maintained for all the geometries considered, and the active space is generated distributing six electrons in five orbitals. After the CASSCF calculation a valence bond (VB) analysis has been performed along an approximate reaction coordinate by projecting the wave function onto a set of four classical structures; a reliable explanatory model of the rearrangement of the electronic structure for this process is then derived. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 74: 59–67, 1999     

Synthesis and characterization of new poly(N-1-adamantylmaleimide) and poly(N-1-diamantylmaleimide)

N-l-Diamantylmaleimide was synthesized by reaction of maleic anhydride with 1-aminodiamantane, followed by dehydration with acetic anhydride and sodium acetate. Poly(N-1-adamantylmaleimide) ( IIa ) and poly(N-l-diamantylmaleimide) ( IIb ) were polymerized using 2,2′-azobisisobutyronitrile (AIBN) as an initiator under different experimental conditions such as various initiator concentrations, solvents, polymerization temperatures, and polymerization times. Polymerizations of N-l-adamantylmaleimide in benzene at 60°C or in bulk gave polymers with molecular weights (2000–9500). The experimental results indicated that the propagation may be interrupted by steric hindrance of bulky and rigid substituents such as the adamantyl or diamantyl groups. In addition, the effect of chain transfer to monomer contributes to the relatively low activation energy. The glass transition temperatures of Ia and Ib were 204 and 216°C, respectively. The temperatures at 5% weight loss of the polymers IIa and IIb were above 412°C. © 1996 John Wiley & Sons, Inc.     

Rh(III)-catalyzed oxidative olefination of N-(1-naphthyl)sulfonamides using activated and unactivated alkenes

Rhodium(III)-catalyzed oxidative olefination of N-(1-naphthyl)sulfonamides has been achieved at the peri position. Three categories of olefins have been successfully applied. Activated olefins reacted to afford five-membered azacycles as a result of oxidative olefination-hydroamination. Unactivated olefins reacted to give the olefination product. 2-fold oxidative C-C and C-N coupling was achieved for allylbenzenes.