Simulation of the flow past a circular cylinder in the supercritical regime by blending RANS and variational-multiscale LES models

A strategy which blends a variational multiscale large eddy simulation (VMS-LES) model and a RANS model in a hybrid approach is investigated. A smooth blending function, which is based on the value of a blending parameter, is used for switching from VMS-LES to RANS. Different definitions of the blending parameter are investigated. The capabilities of the novel hybrid approach are appraised in the simulation of the flow around a circular cylinder at a Reynolds number 1.4×10⁵, based on the freestream velocity and on the cylinder diameter, in the presence of turbulent boundary-layer due to turbulent inflow conditions. A second study at Reynolds numbers from Re=6.7×10⁵ to 1.25×10⁶ is also presented. The effect of using the VMS-LES approach in the hybrid model is evaluated. Results are compared to those of other RANS, LES and hybrid simulations in the literature and with experimental data     

基于卡门尺度和滤波方法的SST方程改进

基于滤波方法和卡门尺度对原始剪切应力输运(shear stress transport, SST)湍流模型进行了改进,提出了一种卡门尺度修正的滤波SST 方法. 湍流多尺度效应必须在分离流场模拟中给予反映,该方法减弱了雷诺平均(Reynolds averaged Navier-Stokes, RANS)方法时间平均特性对于流场脉动量的压迫作用,在流场中引入了大涡模拟(large eddy simulation, LES)方法的亚格子模型,形成一种新型的脱体涡模拟方法(detached eddy simulation,DES)方法;同时,为了降低原始DES方法在网格加密过程中产生网格诱发的雷诺应力损耗,利用卡门尺度对滤波因子进行修正. 平板边界层算例中,卡门尺度对于RANS方法的跟随性远远强于DES方法,在边界层内的速度型和RANS方法吻合很好,而DES方法在加密过程中速度型的鲁棒性较差,说明卡门尺度在有效地保护了边界层内使用RANS求解,降低速度型偏离对数率现象的产生;HGR-01翼型算例证明BY-SST方法可以有效的避免网格诱导分离现象的产生;证明BY-SST方法在分离流动中的精度高于DES方法.     

Applications of scale-adaptive simulation technique based on one-equation turbulence model

A modified scale-adaptive simulation (SAS) technique based on the Spalart-Allmaras (SA) model is proposed. To clarify its capability in prediction of the complex turbulent flow, two typical cases are carried out, i.e., the subcritical flow past a circular cylinder and the transonic flow over a hemisphere cylinder. For comparison, the same cases are calculated by the detached-eddy simulation (DES), the delayed-detached eddy simulation (DDES), and the XY-SAS approaches. Some typical results including the mean pressure coefficient, velocity, and Reynolds stress profiles are obtained and compared with the experiments. Extensive calculations show that the proposed SAS technique can give better prediction of the massively separated flow and shock/turbulent-boundary-layer interaction than the DES and DDES methods. Furthermore, by the comparison of the XY-SAS model with the present SAS model, some improvements can be obtained.     

Studies of the unsteady supersonic base flows around three afterbodies

Unsteady supersonic base flows around three afterbodies, cylindrical （Cy）, boattailed （BT） and three-step （MS）, are investigated in this paper. Reynolds-averaged Navier-Stokes （RANS） and two RANS/LES （large-eddy simulation） hybrid methods, detached eddy simulation （DES） and delayed-DES （DDES）, are used to predict the base flow characteristics around the baseline Cy afterbody. All the RANS and hybrid methods are based on the two-equation SST （shear-stress transport） model with compressible corrections （CC）. According to the comparison of measurements, both DES and DDES can produce more satisfactory results than RANS. RANS can only present the ＂stable＂ flow pat- terns, while the hybrid methods can demonstrate unsteady flow structures. DDES and DES results are little different from one another although the latter exhibits better agreement with the experiment. DES is taken to investigate the 5° BT and three-step afterbodies. The mean flow data and the instantaneous turbulent coherent structures are compared against available measurements.     

Non-zonal detached eddy simulation coupled with a steady RANS solver in the wall region

Xiao and Jenny (2012) proposed an interesting hybrid LES/RANS method in which they use two solvers and solve the RANS and LES equations in the entire computational domain. In the present work this method is simplified and used as a hybrid RANS-LES method, a wall-modeled LES. The two solvers are employed in the entire domain. Near the walls, the flow is governed by the steady RANS solver; drift terms are added to the DES equations to ensure that the time-averaged DES fields agree with the steady RANS field. Away from the walls, the flow is governed by the DES solver; in this region, the RANS field is set to the time-averaged LES field. The disadvantage of traditional DES models is that the RANS models in the near-wall region – which originally were developed and tuned for steady RANS – are used as URANS models where a large part of the turbulence is resolved. In the present method – where steady RANS is used in the near-wall region – the RANS turbulence models are used in a context for which they were developed. In standard DES methods, the near-wall accuracy can be degraded by the unsteady agitation coming from the LES region. It may in the present method be worth while to use an accurate, advanced RANS model. The EARSM model is used in the steady RANS solver. The new method is called NZ S-DES . It is found to substantially improve the predicting capability of the standard DES. A great advantage of the new model is that it is insensitive to the location of the RANS-LES interface.     

Simulation of wing-body junction flows with hybrid RANS/LES methods

In this paper, flows past two wing-body junctions, the Rood at zero angle of attack and NASA TN D-712 at 12.5° angle of attack, are investigated with two Reynolds-Averaged Navier-Stokes (RANS) and large eddy simulation (LES) hybrid methods. One is detached eddy simulation (DES) and the other is delayed-DES, both are based on a weakly nonlinear two-equation k–ω model. While the RANS method can predict the mean flow behaviours reasonably accurately, its performance for the turbulent kinetic energy and shear stress, as compared with available experimental data, is not satisfactory. DES, through introducing a length scale in the dissipation terms of the turbulent kinetic energy equation, delivers flow separation, a vortex or the onset of vortex breakdown too early. DDES, with its delayed effect, shows a great improvement in flow structures and turbulence characteristics, and agrees well with measurements.     

High‐order detached eddy simulation,zonal LES and URANS of cavity and labyrinth seal flows

Hybrid numerical large eddy simulation (NLES), detached eddy simulation (DES) and URANS methods are assessed on a cavity and a labyrinth seal geometry. A high sixth‐order discretization scheme is used and is validated using the test case of a two‐dimensional vortex. The hybrid approach adopts a new blending function. For the URANS simulations, the flow within the cavity remains steady, and the results show significant variation between models. Surprisingly, low levels of resolved turbulence are observed in the cavity for the DES simulation, and the cavity shear layer remains two dimensional. The hybrid RANS–NLES approach does not suffer from this trait. For the labyrinth seal, both the URANS and DES approaches give low levels of resolved turbulence. The zonal Hamilton–Jacobi approach on the other had given significantly more resolved content. Both DES and hybrid RANS–NLES give good agreement with the experimentally measured velocity profiles. Again, there is significant variation between the URANS models, and swirl velocities are overpredicted. Copyright © 2013 John Wiley & Sons, Ltd.     

Experiences with two detached eddy simulation approaches through use of a high-order finite volume solver

In the present study, two advanced detached eddy simulation (DES) approaches, shear-layer-adapted delayed DES and zonal DES in mode II, which are known to help transition from RANS to LES mode, are employed in various flow problems in conjunction with a high-order finite volume solver. The numerical scheme, being only applicable on structured grids, has low-dissipation and low-dispersion features. Such features benefit mostly in the LES mode, minimizing the interference of numerical diffusion with subgrid eddy viscosity. First, corresponding subgrid models are validated via decaying homogeneous turbulence benchmark case. Then, a channel flow problem is chosen to examine these models in attached flow situations. Finally, flow around an airfoil at low Reynolds number is solved using the shear-layer-adapted delayed DES approach only, in an aim to obtain trailing-edge noise spectrum at an observer location. Despite some log-layer mismatch over turbulent boundary layers, which is typical of most DES methods, the combined application of high-resolution numerical method and advanced DES approaches, which are implemented on a stabilized Spalart-Allmaras turbulence model, shows merit in resolution of turbulence in regions of interest.     

A Rapid and Accurate Switch from RANS to LES in Boundary Layers Using an Overlap Region

An efficient recycling algorithm is developed for injecting resolved turbulent content in a boundary layer as it switches from a Reynolds Averaged Navier-Stokes (RANS) type treatment to a Large Eddy Simulation (LES) type treatment inside a generalized Detached-Eddy Simulation (DES). The motivation is to use RANS in the thinnest boundary-layer area, following the original argument in favour of DES, and LES in the thicker boundary-layer areas especially approaching separation, to improve accuracy and possibly obtain unsteady outputs. The algorithm relies on an overlap of the RANS and LES domains and, therefore, the availability of both RANS and LES solutions in the recycling region, which is about 5 boundary-layer thicknesses long. This permits a smooth transfer of the turbulent stresses from this section to the LES inflow. The continuity of the skin-friction distribution is very good, reflecting the excellent viability of the resolved turbulence. The approach is validated in a flat-plate boundary layer and an airfoil near stall, with mild pressure gradient near the interface, and then applied to the compressible flow over an idealized airliner windshield wiper. The pressure fluctuations at reattachment are 12dB more intense than under a simple boundary layer at the same speed, and the output contains all the quantities needed to calculate the transmission of sound through the glass.     

The State of the Art of Hybrid RANS/LES Modeling for the Simulation of Turbulent Flows

This review presents the state of the art of hybrid RANS/LES modeling for the simulation of turbulent flows. After recalling the modeling used in RANS and LES methodologies, we propose in a first step a theoretical formalism developed in the spectral space that allows to unify the RANS and LES methods from a physical standpoint. In a second step, we discuss the principle of the hybrid RANS/LES methods capable of representing a RANS-type behavior in the vicinity of a solid boundary and an LES-type behavior far away from the wall boundary. Then, we analyze the principal hybrid RANS/LES methods usually used to perform numerical simulation of turbulent flows encountered in engineering applications. In particular, we investigate the very large eddy simulation (VLES), the detached eddy simulation (DES), the partially integrated transport modeling (PITM) method, the partially averaged Navier-Stokes (PANS) method, and the scale adaptive simulation (SAS) from a physical point of view. Finally, we establish the connection between these methods and more precisely, the link between PITM and PANS as well as DES and PITM showing that these methods that have been built by different ways, practical or theoretical manners have common points of comparison. It is the opinion of the author to consider that the most appropriate method for a particular application will depend on the expectations of the engineer and the computational resources the user is prepared to expend on the problem.     

A New Version of Detached-eddy Simulation, Resistant to Ambiguous Grid Densities

Detached-eddy simulation (DES) is well understood in thin boundary layers, with the turbulence model in its Reynolds-averaged Navier–Stokes (RANS) mode and flattened grid cells, and in regions of massive separation, with the turbulence model in its large-eddy simulation (LES) mode and grid cells close to isotropic. However its initial formulation, denoted DES97 from here on, can exhibit an incorrect behavior in thick boundary layers and shallow separation regions. This behavior begins when the grid spacing parallel to the wall Δ_∥ becomes less than the boundary-layer thickness δ, either through grid refinement or boundary-layer thickening. The grid spacing is then fine enough for the DES length scale to follow the LES branch (and therefore lower the eddy viscosity below the RANS level), but resolved Reynolds stresses deriving from velocity fluctuations (“LES content”) have not replaced the modeled Reynolds stresses. LES content may be lacking because the resolution is not fine enough to fully support it, and/or because of delays in its generation by instabilities. The depleted stresses reduce the skin friction, which can lead to premature separation.For some research studies in small domains, Δ_∥ is made much smaller than δ, and LES content is generated intentionally. However for natural DES applications in useful domains, it is preferable to over-ride the DES limiter and maintain RANS behavior in boundary layers, independent of Δ_∥ relative to δ. For this purpose, a new version of the technique – referred to as DDES, for Delayed DES – is presented which is based on a simple modification to DES97, similar to one proposed by Menter and Kuntz for the shear–stress transport (SST) model, but applicable to other models. Tests in boundary layers, on a single and a multi-element airfoil, a cylinder, and a backward-facing step demonstrate that RANS function is indeed maintained in thick boundary layers, without preventing LES function after massive separation. The new formulation better fulfills the intent of DES. Two other issues are discussed: the use of DES as a wall model in LES of attached flows, in which the known log-layer mismatch is not resolved by DDES; and a correction that is helpful at low cell Reynolds numbers.     

Detached eddy simulation of cyclic large scale fluctuations in a simplified engine setup

Computational Fluid Dynamics using RANS-based modelling approaches have become an important tool in the internal combustion engine development and optimization process. However, these models cannot resolve cycle to cycle variations, which are an important aspect in the design of new combustion systems. In this study the feasibility of using a Detached Eddy Simulation (DES) SST model, which is a hybrid RANS/LES model, to predict cycle to cycle variations is investigated. In the near wall region or in regions where the grid resolution is not sufficiently fine to resolve smaller structures, the two-equation RANS SST model is used. In the other regions with higher grid resolution an LES model is applied. The case considered is a geometrically simplified engine, for which detailed experimental data for the ensemble averaged and single cycle velocity field are available from Boreé et al. [Boreé, J., Maurel, S., Bazile, R., 2002. Disruption of a compressed vortex, Physics of Fluids 14 (7), 2543–2556]. The fluid flow shows a strong tumbling motion, which is a major characteristic for modern turbo-charged, direct-injection gasoline engines. The general flow structure is analyzed first and the extent of the LES region and the amount of resolved fluctuations are discussed. Multiple consecutive cycles are computed and turbulent statistics of DES SST, URANS and the measured velocity field are compared for different piston positions. Cycle to cycle variations of the velocity field are analyzed for both computation and experiment with a special emphasis on the useability of the DES SST model to predict cyclic variations.     

Properties of the hybrid RANS/LES filter

One of the most important and challenging topics in the Large Eddy Simulation of turbulent flows is the connection of the LES technique to the well known and largely used RANS approach where the Navier–Stokes equations are Reynolds averaged. The hybridation of LES and RANS is not only important for its possible practical use, (a rational use of the computational means in different zones), but also from a theoretical point of view, and one possible procedure consists of blending RANS and LES models in the transition zone. In this paper a new filtering technique based on blending filters which transitions smoothly between LES and RANS is proposed and the associated universal model for the subgrid scale stresses is derived. PACS 47.27.Eq     

LES/RANS方法混合函数特性研究

将两方程k-ω SST湍流模型和Sagaut的混合尺度亚格子模型通过一个混合函数相结合, 构造出一种混合大涡/雷诺平均N-S方程模拟方法(hybird large eddy simulation/reynolds-averaged navier-stokes, Hybrid LES/RANS), 采用这种混合模拟方法结合5阶WENO格式对Ma=2.8平板湍流边界层进行了数值模拟, 并在计算区域上游入口处采用“回收/调节”方法生成湍流脉动边界条件, 通过考查RANS区域向LES区域的过渡参数及网格分辨率对这种混合模拟方法进行了评价. 计算结果表明: 该文采用的混合模拟方法可以捕捉到湍流边界层中的大尺度结构且入口边界层平均参数不会发生漂移, 混合函数应当将RANS区域和LES区域的过渡点设置在对数律层和尾迹律层的交界处, 而过渡应当迅速以获得正确的雷诺剪切应力分布, 在该文采用的模型及数值方法的条件下, 流向及展向的网格小至与Escudier混合长相当时, 能够获得可以接受的脉动速度的单点-二阶统计值.     

Numerical study of an oscillatory turbulent flow over a flat plate

Oscillatory turbulent flow over a flat plate is studied using large eddy simulation (LES) and Reynolds-average Navier-Stokes (RANS) methods. A dynamic subgrid-scale model is employed in LES and Saffman's turbulence model is used in RANS. The flow behaviors are discussed for the accelerating and decelerating phases during the oscillating cycle. The friction force on the wall and its phase shift from laminar to turbulent regime are also investigated for different Reynolds numbers. The project supported by the Youngster Funding of Academia Sinica and by the National Natural Science Foundation of China     

Estimating turbulent-boundary-layer wall-pressure spectra from CFD RANS solutions

A stochastic model for the space–time turbulent boundary-layer wall-pressure spectrum is developed that uses statistical data from Reynolds-Averaged Navier–Stokes (RANS) solutions as input. The model integrates the source terms for the surface-pressure covariance across the boundary layer for user-specified space and time separations to form a discrete surface-pressure correlation function, the Fourier transform of which yields the surface-pressure wavenumber-frequency spectrum. By integrating RANS data into the model, it is able to respond to local geometry and flow conditions. Validation cases show that predicted surface-pressure power spectra respond appropriately to favorable, zero, and adverse pressure gradients. By operating as a post-processor of CFD RANS analyses, the model is a predictive tool that can be used in flow and flow-induced noise analyses. Because contemporary RANS models are able to predict flow statistics well for configurations of practical interest, this approach to modeling the turbulent boundary-layer forcing function is expected to generalize well to new flow configurations without requiring flow-specific tuning.     

Reliability Issues of LES-Related Approaches in an Industrial Context

Large-Eddy Simulation (LES), Detached-Eddy Simulation (DES) and Scale-Adaptive Simulation (SAS) are increasingly being used as engineering tools to predict the behaviour of complex industrial flows. Often the flows studied have not been examined previously and the required grid resolution is unknown. Industrial users studying these flows tend to be using commercial CFD codes and do not usually have access to high-performance computing facilities. Due to the significant computing times required, it is difficult to undertake systematic grid-dependence studies. There is therefore a risk that LES, DES and SAS will be performed using overly coarse grids which may lead to unreliable predictions. The present work surveys a number of practical techniques that provide a means of assessing the quality of the grid resolution in large-eddy simulations and related approaches. To examine the usefulness of these techniques, a gas release in a ventilated room is examined using DES and SAS. The grid resolution measures indicate that overall the grids used are relatively coarse. Both DES and SAS model predictions are found to be in poor agreement with experimental data compared to steady and unsteady Reynolds-averaged Navier–Stokes (RANS) results using the SST model. The SAS model also shows the greatest grid sensitivity of the four models tested. The work highlights the need for grid-dependence studies and the potential problems of using coarse grids.     

Hybrid RANS/LES computations of plane impinging jets with DES and PANS models

The qualities of a DES (Detached Eddy Simulation) and a PANS (Partially-Averaged Navier–Stokes) hybrid RANS/LES model, both based on the k–ω RANS turbulence model of Wilcox (2008, “Formulation of the k–ω turbulence model revisited” AIAA J., 46: 2823–2838), are analysed for simulation of plane impinging jets at a high nozzle-plate distance (H/B = 10, Re = 13,500; H is nozzle-plate distance, B is slot width; Reynolds number based on slot width and maximum velocity at nozzle exit) and a low nozzle-plate distance (H/B = 4, Re = 20,000). The mean velocity field, fluctuating velocity components, Reynolds stresses and skin friction at the impingement plate are compared with experimental data and LES (Large Eddy Simulation) results. The k–ω DES model is a double substitution type, following Davidson and Peng (2003, “Hybrid LES–RANS modelling: a one-equation SGS model combined with a k–ω model for predicting recirculating flows” Int. J. Numer. Meth. Fluids, 43: 1003–1018). This means that the turbulent length scale is replaced by the grid size in the destruction term of the k-equation and in the eddy viscosity formula. The k–ω PANS model is derived following Girimaji (2006, “Partially-Averaged Navier–Stokes model for turbulence: a Reynolds-Averaged Navier–Stokes to Direct Numerical Simulation bridging method” J. Appl. Mech., 73: 413–421). The turbulent length scale in the PANS model is constructed from the total turbulent kinetic energy and the sub-filter dissipation rate. Both hybrid models change between RANS (Reynolds-Averaged Navier–Stokes) and LES based on the cube root of the cell volume. The hybrid techniques, in contrast to RANS, are able to reproduce the turbulent flow dynamics in the shear layers of the impacting jet. The change from RANS to LES is much slower however for the PANS model than for the DES model on fine enough grids. This delays the break-up process of the vortices generated in the shear layers with as a consequence that the DES model produces better results than the PANS model.     

Unsteady CFD simulations of a pump in part load conditions using scale-adaptive simulation

The scope of this work is to demonstrate the applicability of an eddy resolving turbulence model in a turbomachinery configuration. The model combines the Large Eddy Simulation (LES) and the Reynolds Averaged Navier Stokes (RANS) approach. The point of interest of the present investigation is the unsteady rotating stall phenomenon occurring at low part load conditions. Since RANS turbulence models often fail to predict separation correctly, a LES like model is expected to give superior results. In this investigation the scale-adaptive simulation (SAS) model is used. This model avoids the grid dependence appearing in the Detached Eddy Simulation (DES) modelling strategy. The simulations are validated with transient measurement data. The present results demonstrate, that both models are able to predict the major stall frequency at part load. Results are similar for URANS and SAS, with advantages in predicting minor stall frequencies for the turbulence resolving model.