氨基硅油扩链改性水性聚氨酯的合成及性能研究

采用甲苯二异氰酸酯(TDI)、聚氧化丙烯二醇(PPG)、2,2-二羟甲基丙酸(DMPA)为原料,先制备成聚氨酯预聚体,再通过在乳化过程中以侧链氨基硅油(AEAPS)或直链氨基硅油(ATPS)扩链制得了一系列水性聚氨酯乳液,并对涂膜的红外光谱、耐水性、力学性能和表面疏水性等进行了研究。结果表明,通过氨基硅油改性的聚氨酯涂膜,在保持力学性能基本不变的情况下,其耐水性、表面疏水性等性能都有明显提高。其中,侧链氨基硅油(AEAPS)比直链氨基硅油(ATPS)具有更好的改性效果。     

氨基硅油扩链改性水性聚氨酯的研究

通过将由甲苯二异氰酸酯与聚四氢呋喃,二羟甲基丙酸反应制得的聚氨酯预聚体在低浓度氨基硅油的水乳液中扩链,合成了一种硅氧烷改性的聚氨酯水乳液,并用傅立叶红外光谱,ＥＳＣＡ能谱,接触角仪,电子拉力试验机,吸水率测定及乳液稳定性测试对其进行研究。     

Tribological performance and thermal behavior of epoxy resin nanocomposites containing polyurethane and organoclay

A series of epoxy resin nanocomposites modified by polyurethane and organically modified montmorillonite was prepared by effectively dispersing the organically modified montmorillonite in interpenetrating polymer networks (IPNs) of epoxy and polyurethane via the sequential polymeric technique and in situ polymerization. The tribological performance of the resultant EP/PU nanocomposites was investigated by a pin‐on‐disc tester, and the results showed that adding polyurethane and organically modified clay to the EP matrix had a synergistic effect on improving tribological performance of EP/PU nanocomposites. The morphologies of the worn surface were studied by scanning electron microscopy (SEM) observations, and the results indicated that the mechanism of improving tribological performance of EP/PU nanocomposites was different from that of pure EP or pure EP/PU IPNs. The thermal behavior of these nanocomposites was also investigated by thermogravimeric analysis (TGA), and the results indicated that adding organically modified clay to the matrix remedied the deterioration of the thermal degradation temperature of the interpenetrating networks. Copyright © 2008 John Wiley & Sons, Ltd.     

A novel type of Si-containing poly(urethane-imide)s: synthesis, characterization and electrical properties

A novel type of a Si-containing poly(urethane-imide) (PUI) was prepared by two different methods. In the first method, Si-containing polyurethane (PU) prepolymer having isocyanate end groups was prepared by the reaction of diphenylsilanediol (DSiD) and toluene diisocyanate (TDI). Subsequently the PU prepolymer was reacted with pyromellitic dianhydride (PMDA) or benzophenonetetracarboxylic dianhydride (BTDA) in N-methyl pyrolidone (NMP) to form Si-containing modified polyimide directly. In the second method, PU prepolymer was reacted with diaminodiphenylether (DDE) or diaminodiphenylsulfone (DDS) in order to prepare an amine telechelic PU prepolymer. Finally, the PU prepolymer having diamine end groups was reacted with PMDA or BTDA to form a Si-containing modified polyimide. Cast films prepared by second method were thermally treated at 160 °C to give a series of clear, transparent PUI films. Thermogravimetric analysis indicated that the thermal degradation of PUI starts at 265 °C which is higher than degradation temperature of conventional PU, confirming that the introduction of imide groups improved the thermal stability of PU.To characterize the modified polyimides and their films, TGA, FTIR, SEM and inherent viscosity analyses were carried out. The dielectrical properties were investigated by the frequency-capacitance method. Dielectric constant, dielectric breakdown strength, moisture uptake and solubility properties of the films were also investigated.     

Micromorphology and phase behavior of cationic polyurethane segmented copolymer modified with hydroxysilane

A series of cationic waterborne polyurethane dispersions (SiPU) modified with hydroxysilane (HPMS) were successfully synthesized based on poly(oxytetramethylene) glycols (PTMG) and isophorone isocyanate (IPDI), and the films were obtained by casting the dispersions on tetrafluoroethylene (TFE) plates. Effects of HPMS content on micromorphology, particle size of the dispersions were studied, as well as thermal properties, phase behavior and surface structure of the films. The particles had the morphology of a solid sphere, with particle size varying from 17.1 nm to 114.4 nm corresponding to the increase of HPMS concentration, which can be attributed to the increase of interfacial tension. XPS spectra indicated the surface migration of Si element in the process of film forming, and the SiPU surface was mainly composed of soft segments. DSC analysis, together with TG-DTG-DTA results demonstrated the HPMS soft segment merged with the transition region of PU matrix, forming part of polyurethane backbone, but an improved microphase separation was observed when HPMS concentration greater than 15%. It was also found that incorporation of flexible HPMS prevented the degradation of polyurethane backbone, resulting in the increase of thermal stability in ultimate copolymer.     

Preparation and characterization of waterborne polyurethanes modified with bis(3-(1-methoxy-2-hydroxypropoxy) propyl) terminated polysiloxanes

Polyurethanes(PU) were prepared using toluene diisocyanate,polypropylene glycol,ethylene glycol, dimethylolpropionic acid and triethylamine,and a siloxane modified PU(PSU) was obtained through reaction of the PU prepolymers with bis(3-(1-methoxy-2-hydroxypropoxy)propyl) terminated polysiloxanes(PMTS) of different molecular weight,specifically designed for this purpose.Results showed that,with increases in molecular weight of PMTS and its content,viscosity of the final PSU latexes decreased;phase separation of the incorporated PMTS in PSU films increased;the average particle sizes of the latexes varied between 110 nm and 330 nm,and the surface tension in the final latexes was relatively constant regardless of PMTS amount and its molecular weight.It was likely that copolymerized polysiloxanes had trend to enrich on top of the film when PMTS molecular weight was around 2000 and its content above 5 wt%.In general, PMTS modified polyurethane films showed higher performance than those from unmodified waterborne polyurethane latexes.     

Thermal,mechanical and electroactive shape memory properties of polyurethane (PU)/poly (lactic acid) (PLA)/CNT nanocomposites

Polymer blend nanocomposites based on thermoplastic polyurethane (PU) elastomer, polylactide (PLA) and surface modified carbon nanotubes were prepared via simple melt mixing process and investigated for its mechanical, dynamic mechanical and electroactive shape memory properties. Chemical and structural characterization of the polymer blend nanocomposites were investigated by Fourier Transform infrared (FT-IR) and wide angle X-ray diffraction (WAXD). Loading of the surface modified carbon nanotube in the PU/PLA polymer blends resulted in the significant improvement on the mechanical properties such as tensile strength, when compared to the pure and pristine CNT loaded polymer blends. Dynamic mechanical analysis showed that the glass transition temperature (T_g) of the PU/PLA blend slightly increases on loading of pristine CNT and this effect is more pronounced on loading surface modified CNTs. Thermal and electrical properties of the polymer blend composites increases significantly on loading pristine or surface modified CNTs. Finally, shape memory studies of the PU/PLA/modified CNT composites exhibit a remarkable recoverability of its shape at lower applied dc voltages, when compared to pure or pristine CNT loaded system.     

Synthesis and characterization of novel h‐HTBN/PEG PU copolymers for tissue engineering: degradation,phase behavior,and mechanical properties

The phase behavior of the as‐prepared polyether polyurethane (PU) elastomers was investigated by dynamic mechanical analysis (DMA), polarized optical microscope (POM), and atomic force microscopy (AFM). This PU copolymers were composed of different compositions of two soft segments, poly(ethylene glycol) (PEG) and hydrolytically modified hydroxyl‐terminated poly(butadiene‐co‐acrylonitrile) (h‐HTBN) oligomers. The microphase separation behavior is confirmed to occur between soft and hard segments as well as soft and soft segments as the h‐HTBN is incorporated into the PU system, depending on soft‐soft and/or soft‐hard microdomain composition, molecular weight (MW) of PEG, and hydrolysis time of HTBN. The driving force for this phase separation is mainly due to the formation of inter‐ and intramolecular hydrogen bonding interaction. The PU‐70, PU‐50 samples with non‐reciprocal composition seem to exhibit larger microphase separation than any other PU ones. The hydrolysis degradation, thermal stability, and mechanical properties of the copolymers were assessed by gravimetry, scanning electron microscope (SEM), thermal gravity analysis (TGA), and tensile test, respectively. The experimental results indicated that the incorporation of h‐HTBN soft segment into PEG as well as low MW of PEG leads to increased thermal and degradable stability based on the intermolecular hydrogen bond interaction. The PU‐70 and PU‐50 copolymers exhibit better mechanical properties such as high flexibility and high ductility because of their larger microphase separation architecture with the hard domains acting as reinforcing fillers and/or physical crosslinking agents dispersed in the soft segment matrix. Copyright © 2009 John Wiley & Sons, Ltd.     

Lanthanum phenylphosphonate–based multilayered coating for reducing flammability and smoke production of flexible polyurethane foam

In the present work, lanthanum phenylphosphonate (LaPP)–based multilayered film was fabricated on the surface of flexible polyurethane (PU) foam by layer‐by‐layer self‐assembled method. The successful deposition of the coating was confirmed by scanning electron microscopy (SEM) and energy‐dispersive X‐ray (EDX). Subsequently, the thermal decomposition and burning behavior of untreated and treated PU foams were investigated by thermogravimetric analysis (TGA) and cone calorimeter, respectively. The TGA results indicated that T_max2 of treated PU foams were increased by approximately 15°C to 20°C as compared with untreated PU foam. The peak heat release rate (PHRR) and total heat release (THR) of PU‐6 (with 19.5 wt% weight gain) were 188 kW/m² and 20.3 MJ/m², with reductions of 70% and 15% as compared with those of untreated PU foam, respectively. Meanwhile, the smoke production of treated PU foam was suppressed after the construction of LaPP‐based coating.     

Study on thermal properties of polyurethane nanocomposites based on organo-sepiolite

The effects of sepiolite modified with γ-aminopropyltriethoxylsilane (KH550-Sp) on thermal properties of polyurethane (PU) nanocomposites were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TG), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and tensile test. The DSC results showed that the glass transition temperature of hard segments in PU/KH550-Sp nanocomposite increased with the increase of KH550-Sp, because sepiolite restricted the formation of hydrogen bonding within hard segments of polyurethane. TG results revealed that the thermal stability of PU was improved by KH550-Sp, and the onset decomposition temperature for PU nanocomposites with a KH550-Sp content of 3 wt% was about 20 °C higher than that for pure PU. The tensile properties of pure PU and nanocomposites before and after ageing 120 °C for 72 h were determined, and it was observed that the percentage loss in tensile strength decreased with the addition of KH550-Sp because of an oxidation barrier of KH550-Sp confirmed by ATR-FTIR.     

偶联剂对丙烯酸酯改性聚氨酯聚合物接枝率和乳液性能的影响

合成了含双羟基的甲基丙烯酸甘油酯(GM)并将其作为偶联剂用于聚丙烯酸酯(PAC)对水基聚氨酯(PU)的改性.采用核磁共振、红外光谱和气相色谱等对GM进行了表征.分别以该双羟基GM和单羟基的丙烯酸羟乙酯(HEA)与异氰酸酯基(NCO)封端的PU预聚体进行反应以在PU分子链上引入双键,然后再与丙烯酸酯类单体通过自由基聚合制...     

采用层层自组装与光化学修饰法在聚氨酯表面固定生物多糖衍生物

采用层层自组装技术与光化学修饰方法相结合在聚氨酯材料表面固定生物多糖衍生物,首先合成具有光反应活性的叠氮壳聚糖,再在聚氨酯基材表面进行叠氮壳聚糖与香菇多糖硫酸酯的层层自组装,然后通过光化学反应对自组装多层膜修饰层进行交联,制备得到生物多糖衍生物层层自组装与光化学表面修饰的聚氨酯材料.通过红外光谱、X射线光电子能谱、水接触角测量仪、抗菌活性测试、溶血试验和血小板黏附测试等方法对被修饰聚氨酯材料的表面性能和生物性能进行了分析,测试结果表明修饰后的聚氨酯材料表面的亲水性和血液相容性得到改善,并且被修饰材料对大肠杆菌具有良好的抑制效果.     

A degradation study of waterborne polyurethane based on TDI

The thermal degradation of synthetic waterborne polyurethane (PU) based on toluenediisocyanate (TDI) was investigated by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and thermogravimetry (TG). The degradation profiles of cast films obtained from dispersions were evaluated. More than 20 characteristic volatile pyrolyzates reflecting the structure and pyrolysis mechanisms of the polymer have been identified by on-line MS. The synthesized products of polyurethane were pyrolyzed at 350, 450, 550, 650 and 750 °C respectively, and the analysis results revealed that the pyrolyzates distribution of the polyurethane depends strongly on the pyrolysis temperature. The aqueous polyurethane thermogravimetric measurements were used to study the kinetics of thermal degradation.     

聚氨酯/蒙脱土纳米复合材料的制备与性能研究

纳米复合材料由于其纳米尺寸效应 ,表面效应以及纳米粒子与基体界面间强的相互作用 ,具有优于相同组分常规复合材料的力学 ,热学等性能 ,引起了人们的广泛关注 .用纳米材料改性聚合物 ,制备纳米复合材料是获得高性能高分子复合材料的重要方法 ,采用较多的是插层复合法 ,可分为两类 ,一是单体预先插层于层状结构填料的晶片层间 ,然后聚合 ;二是聚合物溶液或熔体直接插层于层状结构填料的晶片层间 .聚氨酯 (PU)是由多异氰酸酯与多元醇通过加聚反应而形成的高聚物 ,其重复结构单元是氨基甲酸酯链段( R2 OCONHR1NHCOO) .PU弹性体具有耐磨…     

Synthesis and thermal studies of flexible polyurethane nanocomposite foams obtained using nanoclay modified with flame retardant compound

This work presents thermal studies of nanocomposites based on the flexible polyurethane (PU) matrix and filled using montmorillonite organically modified with organophosphorus flame retardant compound. Flexible PU nanocomposite foams were prepared in the reaction carried out between reactive alcoholic hydroxyl and isocyanate groups with the ratio of NCO to OH groups equal to 1.05. The amount of an organoclay ranging from 3 to 9 vol% was added to the polyol component of the resin before mixing with isocyanate. The apparent density of PU foams was ranging from 0.066 to 0.077 g cm^?1. Thermal properties of the flexible PU nanocomposite foams were investigated by thermogravimetry and dynamical mechanical analysis. Glass transition temperatures (T _g) were defined as maximum peak on tanδ curve. Thermal decomposition was observed at 310–320 °C (calculated from the onset of TG curve). Tensile strength of the PU foams was determined using mechanical test. The microstructure of the nanoparticles and the composites was investigated by X-ray diffraction. Finally, it was confirmed that the thermal and mechanical properties of flexible PU nanocomposite depend on the amount of nanoclay.     

含杂环聚芳醚腈酮的亲水改性

为得到适合于耐高温水性涂料用的亲水性树脂,在碱性条件下对含有二氮杂萘酮结构的耐高温聚合物聚芳醚腈酮(PPENK)进行了亲水改性,选定不同反应时间的改性树脂HPPENKa(0.5 h)、HPPENKb(1.5 h)和HPPENKc(3.5 h),测定其玻璃化转变温度(Tg)、热失重温度、水接触角和溶解性,研究改性聚合物的性能变化.结果表明,随着反应时间的延长,氰基转化率提高,水解产物Tg增加,热失重温度有所降低,水解前后的溶解性能有很大变化,亲水性能明显增强,例如,当氰基转化率为93.82%时,HPPENK膜的水接触角达到54.4°,比PPENK膜的水接触角(75.3°)减小了20.9°.同时,甄选不同的反应共溶剂、反应温度以及碱浓度,考察其对反应的影响,结果表明,当反应温度为120℃6、mol/L NaOH溶液、以DMAc作为反应的共溶剂时对反应较为有利.制备了基于3种改性树脂的水分散体,其静置稳定性依次为HPPENKc>HPPENKb>HPPENKa,其中HPPENKc水分散体较稳定,30天内未出现沉淀.改性聚合物的结构经FT IR和1H-NMR表征.     

Engineered polymer matrix novel biocompatible materials decorated with eucalyptus oil and zinc nitrate with superior mechanical and bone forming abilities

Electrospun scaffolds based on polymer-matrix composites have gained wide attention recently. A novel engineered biocompatible scaffold is manufactured using polyurethane (PU) loaded with eucalyptus oil (EL) and Zinc nitrate (ZnNO₃) using the electrospinning technique. Morphological observations revealed the reduced fibre diameter for the PU/EL and PU/EL/ZnNO₃ compared to PU. Contact angle studies indicated the increase in hydrophobic behaviour of the PU/EL whereas an increase in wettability for PU/EL/ZnNO₃ compared to PU. EL and ZnNO₃ presence in the PU matrix enhanced the mechanical strength. Surface topology analysis showed a decrease in the roughness for the PU/EL and PU/EL/ZnNO₃ compared to the pristine PU. Both PU/EL and PU/EL/ZnNO₃ showed prolonged clotting time and decreased haemolytic percentage compared to the polyurethane as indicated in their anticoagulation studies. In vitro bone mineralisation testing depicted the increase in calcium deposition for the modified PU samples compared to pure polyurethane sample. Hence, PU/EL and PU/EL/ZnNO₃ scaffold with superior properties render full avenues for new bone generation.     

不饱和糖功能单体接枝聚氨酯膜的制备及其血液相容性

通过葡萄糖、丙烯酸羟乙酯和丁二胺反应,制备了含不饱和双键的糖基功能单体。 采用傅里叶红外光谱和核磁共振氢谱对合成的产物进行结构表征确定。 采用紫外光引发接枝聚合技术,将制备的不饱和糖单体接枝聚合到聚氨酯膜的表面,以衰减全反射模式下傅里叶红外光谱对表面接枝反应进行了确认。 通过静态水接触角实验和血小板黏附实验,分别对改性聚氨酯膜表面的亲水性和血液相容性进行了研究,结果表明,改性聚氨酯膜表面的接触角从86°降低到45°,血小板的粘附量由14.36×10³ cells/mm²减少到2.57×10³ cells/mm²,亲水性明显增强,血液相容性显著改善。     

Synthesis and characterization of a novel hydroxy terminated polydimethylsiloxane and its application in the waterborne polysiloxane–urethane dispersion for potential marine coatings

α‐Butyl ω‐N, N‐dihydroxyethyl aminopropylpolymethylhydrosiloxane (PDMS), a monotelechelic polydimethylsiloxane with a diol‐end group, which is used to prepare siloxane–urethane dispersion, was successfully synthesized. Then, novel silicone‐based polyurethane (PU)‐dispersion was prepared by the addition polymerization of hexamethylene diisocyanate, to PDMS, polyethylene glycol (PEG) and dimethylol propionic acid. The goal of this study was to explore the potential use of polysiloxane–urethane in marine coatings in order to boost the flexibility, adhesion, erosion and foul‐release property with respect to PDMS/PEG ratio (PDMS wt%). The PDMS was characterized by Fourier‐transform infrared (FT‐IR), proton nuclear magnetic resonance and carbon‐13 nuclear magnetic resonance spectroscopic techniques. The results showed that each step was successfully carried out and the targeted products were synthesized in all cases. The structural elucidation of the synthesized waterborne PU and waterborne polysiloxane–urethane (WBPSU) was carried out by FT‐IR spectroscopic technique. Thermal properties of the resins were studied by using thermogravimetric analysis and differential scanning calorimetry. The antifouling property of the coatings was investigated by the immersion test under a marine environment for 90 days. The fouled area was calculated for all the samples, and the fouled area (%) decreased with increasing PDMS content. After 90 days, the lowest fouled area (6%) was observed in the sample using WBPSU2 (PDMS 4.48 wt%) among all of the samples. Copyright © 2012 John Wiley & Sons, Ltd.     

水性聚氨酯研究进展

本文较系统地介绍和评价了国内外水性聚氨酯的制备、性能、应用及其发展。