Preparation and characterization of graft copolymerization of ethyl acrylate onto hydroxypropyl methylcellulose in aqueous medium

Graft copolymerization of ethyl acrylate (EA) onto water-soluble hydroxypropyl methylcellulose (HPMC) was investigated with potassium persulfate (KPS) as initiator in an aqueous medium. The effects of monomer concentration, initiator concentration, matrix concentration, reaction temperature, reaction time and pre-interacting time in terms of percentage of grafting (G) and grafting efficiency (G _E) are discussed. The graft copolymers were characterized by Fourier transform infrared spectra (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction analysis (XRD) and differential scanning calorimetry (DSC). In addition, equilibrium humidity adsorption behavior of the pure grafted copolymers was also studied.     

Graft copolymerization of methyl acrylate onto potato starch initiated by ceric ammonium nitrate

A study was made of the ceric ammonium nitrate (CAN) initiated graft copolymerization of methyl acrylate (MA) onto potato starch. The variables affecting the graft were investigated. The optimums have been obtained; they are the concentrations of MA, CAN, and nitric acid (HNO₃) (1.08, 5.0 × 10^?3, and 0.081 mol/L, respectively). The reaction temperature is ca. 50°C and the reaction time is 2 h. The molecular weight of grafted poly(methylacrylate) has been determined. On the basis of experimental results, the mechanism of grafting has been explored, a new kinetic equation of the graft copolymerization is established: R_p = Kk_d [STOH] [Ce⁴⁺] + Kk_pk_d/k_t[STOH][M], where K, k_d, k_p, and k_t are constants. The equation fits the results of experiments. © 1993 John Wiley & Sons, Inc.     

Radical copolymerization of acrylonitrile with 2,2,2‐trifluoroethyl acrylate for dielectric materials: Structure and characterization

Radical copolymerization based on acrylonitrile (AN) and 2,2,2‐Trifluoroethyl acrylate (ATRIF) initited by AIBN was investigated in acetonitrile solution. The resulting poly(AN‐co‐ATRIF) copolymers were characterized by ¹H, ¹³C, and ¹⁹F NMR and IR spectroscopy, and size exclusion chromatography (SEC). Their compositions were assessed by ¹H NMR. The kinetics of radical copolymerization of AN with ATRIF was investigated from sereval experiments achieved at 70 °C from initial [AN]₀/[ATRIF]₀ molar ratios ranging between 20/80 and 80/20 and was enabled to determine the reactivity ratios of both comonomers. From the monomer—polymer copolymerization curve, the Fineman–Ross and Kelen–Tüdos laws enabled to assess the reactivity ratios (r_AN= r₁ = 1.25 ± 0.04 and r_ATRIF = r₂ = 0.93 ± 0.05 at 70 °C) while the revised patterns scheme led to r₁₂ = r_AN = 1.03, and r₂₁ = r_ATRIF = 0.78 at 70 °C. In all cases, r_AN x r_ATRIF product was close to unity, which indicates that poly(AN‐co‐ATRIF) copolymers exhibit a random structure. This was also confirmed by the Igarashi's and Pyun's laws which revealed the presence of AN‐ATRIF, AN‐AN, and ATRIF‐ATRIF dyads. The Q and e values for ATRIF were also assessed (Q₂ = 0.62 and e₂ = 0.93). The glass transition temperature values, T_g, of these copolymers increased from 17 to 61 °C as the molar percentage of ATRIF decreased from 77 to 16% in the copolymer. Thermogravimetry analysis of poly(AN‐co‐ATRIF) copolymers showed a good thermal stability compared to that of poly(ATRIF) homopolymer due to incorporation of AN comonomer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3856–3866     

Preparation and characterization of a novel fluorinated acrylate resin

The novel fluorinated acrylate resin was successfully prepared by solution polymerization of 2-(perfluoro-(1,1-bis-isopropyl)-2-propenyl)oxyethyl methacrylate (POMA) with butyl acrylate (BA), methyl methacrylate (MMA) and methacrylic acid (MAA) initiated by AIBN in the co-solvents of ethyl acetate, butyl alcohol and toluene. POMA was synthesized from the intermediate perfluoro nonene and 2-hydroxyethyl methacrylate as the staring reactants. Films of the novel fluorinated acrylate resin were prepared by coating the resin directly on the clean glass sheet and allowed to dry at room temperature. The characteristics of the film such as hydrophobicity, glass transition temperature and thermal stability were characterized with the contact angle, differential scanning calorimetry and thermo-gravimetric analysis respectively. The structure of the novel fluorinated acrylate resin was investigated by Fourier transform infrared (FTIR) spectrometry. The influences of the fluorine content on the performance of the acrylate resin were studied. Results show that the hydrophobicity, chemical resistance, glass transition temperature and thermal stability of the acrylate resin are improved when the fluorinated monomer is introduced to copolymerize with other monomers. However, the hydrophobicity of the fluorinated acrylate resin is improved slightly via annealing.     

Synthesis of 2-phenoxy-2-phenylethyl acrylate and copolymerization with 2-phenylethyl acrylate: Estimation of monomer reactivity ratios,thermal and optical properties

A new aromatic based monomer 2-phenoxy-2-phenylethyl acrylate (PPEA) was synthesized. Copolymers of PPEA with 2-phenylethyl acrylate (PEA) were prepared by free radical polymerization. The reactivity ratios were estimated using various graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. Optical properties of polymers such as refractive indices and UV-Visible absorption were investigated. The glass transition temperature and thermal degradation behavior of the copolymers were studied. Combined with the RI, transparency and thermal properties, prepared copolymers hold great promise as materials for intraocular lens applications.     

Graft copolymerization of butyl acrylate and 2‐ethyl hexyl acrylate from labile chlorines of poly(vinyl chloride) by atom transfer radical polymerization

Trace amounts of labile chlorines present in poly(vinyl chloride) (PVC) were found to act as initiation sites for the preparation of graft copolymers of PVC by copper‐mediated atom transfer radical polymerization (ATRP). High grafting yields were attained during the graft copolymerizations of n‐butyl acrylate (161.8%) and 2‐ethyl hexyl acrylate (51.2%) in 7.5 h. In both cases, the grafting proceeded with first‐order kinetics with respect to the monomer concentrations, this being typical for ATRP. Gel permeation chromatography traces of the resulting products did not exhibit additional peaks attributable to the formation of free homopolymers. The presented procedure offers an efficient means of preparing self‐plasticized PVC structures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3457–3462, 2003     

Study on the radiation-induced copolymerization of acrylamide with sodium acrylate in aqueous solution

In present work, the mechanism of radiation-induced copolymerization of acrylamide(AM) with sodium acrylate(AANa) in aqueous solution was studied. A method to protect the copolymerization system from the crosslinking and a carbon-carbon mechanism to form gel in copolymerization reaction have been proposed. The condition to prepare the products with different molecular weight, especially with very high molecular weight were found.     

Dispersion copolymerization of styrene and butyl acrylate in polar solvents

Monodisperse copolymer particles from 1.1 to 2.6 μm in diameter were obtained by unseeded batch dispersion copolymerization of styrene and butyl acrylate in an ethanol–water medium. A two-level factorial design using bottle polymerizations was initially carried out including the following variables: stabilizer concentration, initiator concentration, polarity of the dispersion medium, initial monomer concentration, and temperature. Once the region of experimental conditions in which monodisperse latexes can be prepared was identified, further effort was devoted to analyze the effect of other variables. It was found that the temperature at which nucleation occurs and the evolution of the temperature after the onset of nucleation were critical to obtain monodisperse particles. The particle size increased with increasing initial monomer concentration and ethanol–water weight ratio, and decreasing stabilizer concentration. A minimum quantity of emulsifier was necessary to avoid coalescence of particles and to obtain monodisperse particles. © 1996 John Wiley & Sons, Inc.     

Solvent effect on the free‐radical copolymerization of 2‐hydroxyethyl methacrylate with t‐butyl acrylate

The free‐radical copolymerization of 2‐hydroxyethyl methacrylate with t‐butyl acrylate was carried out at 50 °C in bulk and in 3 mol · L^?1 1,4‐dioxane and N,N′‐dimethylformamide solutions. Differences between the apparent reactivity ratios determined in this work indicated a noticeable solvent effect. This is explained with a qualitative bootstrap effect. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2043–2048, 2001     

Superabsorbent materials derived from hydroxyethyl cellulose and bentonite: Preparation,characterization and swelling capacities

Superabsorbent polymers (SAPs) and composites (SAPCs) were prepared entirely by graft copolymerization of polyacrylamide (PAM) onto hydroxyethyl cellulose (HEC), using potassium persulfate (KPS) as an initiator, and N,N′-methylenebisacrylamide (MBA) as a crosslinker, in an aqueous solution. The extent of grafting was evaluated from % grafting efficiency (%GE) for various HEC/AM ratios, and a near optimal ratio was determined. Influences of various preparation parameters, i.e., the ratio of HEC/AM, amount of initiator and crosslinker, reaction temperature and time, and amount of filler on water swelling capacity of SAPs and SAPCs were studied. An FT-IR determination confirmed that the PAM was successfully grafted onto the HEC backbone, by showing absorption bands of the HEC backbone and new absorption bands from the grafted copolymer. The swelling capacity of SAPs and SAPCs depended strongly on different parameters, and the maximum swelling capacity was over 426 g/g and 538 g/g for the SAPs and SAPCs, respectively.     

On kinetics of microemulsion copolymerization of butyl acrylate and acrylonitrile

The oil-in-water microemulsion copolymerizations of butyl acrylate and acrylonitrile initiated by water (ammonium peroxodisulfate, AP)—and oil (dibenzoyl peroxide, DBP)—soluble radical initiators were investigated. Copolymerizations show two distinct nonstationary rate regions. The maximum rate of polymerization is found to be proportional to the 0.48th and 0.65th power of the AP and DBP concentration, respectively. The rate per particle is found to be proportional to the 0.05th and 0.2nd power of the AP and DBP concentration, respectively. The rate of polymerization decreases with increasing the acrylonitrile concentration. The number of particle increases with increasing conversion up to 50–70%. The number-average molecular weight increases with conversion up to ca. 20% and then decreases. The number-average molecular weights were found to decrease with increasing the concentration of both initiator and acrylonitrile. The experimental results were discussed in terms of the water-phase polymerization, the chain-transfer and radical desorption events, the particle nucleation during the whole polymerization, and recruiting monomer and emulsifier from the free monomer-swollen emulsifier micelles. © 1996 John Wiley & Sons, Inc.     

Graft copolymerization of butyl acrylate onto casein initiated by potassium diperiodatonickelate(IV) in alkaline medium

The novel redox system, potassium diperiodatonickelate (Ni(IV))-casein, was used to initiate graft copolymerization of butyl acrylate onto casein under heterogeneous conditions in aqueous 5% potassium hydroxide solution, which showed high grafting efficiency and percent grafting. FT i.r. spectroscopy, thermal analysis and scanning electron microscopy characterized the structures and properties of the grafted copolymer. The effects of synthesis variables in the graft copolymerization have been discussed in the light of grafting efficiency, percent grafting and the rate of polymerization. A possible initiation mechanism is proposed.     

Reversible addition-fragmentation chain transfer radical copolymerization of β-pinene and methyl acrylate

The feasibility of radical copolymerization of β-pinene and methyl acrylate (MA) was clarified for the first time. The monomer reactivity ratios were evaluated by Fineman-Ross, Kelen-Tudos and non-linear methods, respectively. The obtained values were r_β-pinene ∼ 0 and r_MA ∼ 1.3, indicating that the copolymerization led to polymers rich in methyl acrylate units and randomly alternated by single β-pinene unit. The addition of Lewis acid Et₂AlCl to the AIBN-initiated copolymerization enhanced the incorporation of β-pinene. Furthermore, the possible controlled copolymerization of β-pinene and MA was then attempted via the reversible addition-fragmentation transfer (RAFT) technique. The copolymerization (f_β-pinene = 0.1) using 1-methoxycarbonyl ethyl dithiobenzoate (MEDB) as a RAFT agent gave copolymers with lower molecular weight and narrower molecular weight distribution. However, the presence of MEDB strongly retarded the copolymerization. Thus a new RAFT agent 1-methoxycarbonyl ethyl phenyldithioacetate (MEPD), which gives a less stable macroradical intermediate than MEDB, was synthesized and introduced to the copolymerization. As anticipated, a much smaller retardation was observed. Moreover, the copolymerization displayed a somewhat controlled features within a certain overall conversion (<∼40%).     

Solvent effects on radical copolymerization of acrylonitrile and methyl acrylate: solvent polarity and solvent-monomer interaction

Abstract

New insights for the effects of organic solvent polarities and solvent-monomer interactions on the radical copolymerization for an important copolymer, poly(acrylonitrile-co-methyl acrylate) (PAN-co-MA), were provided in this research. Solvents, dimethylformamide (DMF), dimethylacetamide (DMAc) and dimethyl sulfoxide (DMSO), were used as reaction media. The polarity of these solvents was in the sequence of DMAc?<?DMF?<?DMSO. By studying the reactivity ratios of AN and MA, the triad fractions of the resultant copolymers, the interactions between monomers and solvents, and the compositions of copolymers at various conversions, we concluded that the solvent polarity had minimal influence on the copolymerization of AN and MA, while the solvent-monomer interactions played important roles. The interactions between monomer-monomer, monomer-solvent, and solvent-solvent, were calculated based on quantum chemistry methods. Both theoretical calculations and experimental results suggested that AN and MA in DMSO tended to aggregate locally, while they could be homogeneously dissolved in DMAc and DMF. The interactions between solvent and monomers could cause local monomer concentration variations, or ‘bootstrap’ effect, which is one of the critical factors affecting the copolymerization process of AN and MA and the chemical structures of the resultant polymers.     

Emulsion copolymerization of butyl acrylate with cationic monomer using interfacial redox initiator system

The polymerization kinetics of butyl acrylate/[2‐(methacryloyoxy)ethyl]trimethyl ammonium chloride (BA/MAETAC) macroemulsion and miniemulsion copolymerizations was investigated with cumene hydroperoxide/tetraethylenepentamine as a redox initiator system. The postulate of an interfacial copolymerization with the two‐component redox initiator system (one hydrophobic and the other hydrophilic) was confirmed. Adding MAETAC had a complex effect on the polymerization kinetics of BA. The influence was ascribed to variations in the nucleation mechanism, which were dependent on the level of MAETAC, and the polymerization method (macroemulsion vs miniemulsion). It was proposed that at the beginning of a macroemulsion copolymerization with high MAETAC composition the micellar copolymerization occurred, which controlled the nucleation process. The hydration properties of the latex were used to characterize the copolymer composition. The composition of the copolymer from the interfacial polymerization was very heterogeneous. The copolymer composition was lower in BA when there was an increase in BA conversion or the particle size. Adding salt increased the MAETAC content and decreased the BA content in the copolymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2696–2709, 2001     

水性涂料用聚丙烯酸酯微乳液的合成及其表征

低污染、低能耗的乳液涂料在建筑涂料中得到了广泛应用,具有核壳结构的聚合物乳液对胶膜的力学性能有较大的改善[1],微米(或纳米)级乳液具有优异的成膜性能,两者均是近年来高分子材料科学中发展十分迅速的新领域[2]。但微乳液聚合时乳化剂用量大,单体含量少。本文采用阴非离子复合乳化剂体系,单体预乳化工艺,种子乳液聚合法,通过正交实验优化聚合工艺参数及体系配方,合成了纳米级聚丙烯酸酯微乳液。并对乳液聚合物的粒径及分布、热性能、分子量及分布、结构等进行了表征。1　实验部分1 1　主要原料及乳液表征苯乙烯(St)、甲基丙烯酸甲…     

Preparation and characterization of fluorinated acrylate copolymer latexes by miniemulsion polymerization under microwave irradiation

Fluoroacrylate copolymer miniemulsion was prepared by miniemulsion polymerization under microwave irradiation. The composition of the copolymer was determined by FTIR, DSC, ¹H NMR and ¹⁹F NMR. The morphology, size, and size distribution of the latex particles as well as changes in the size during polymerization were characterized by TEM and photon correlation spectroscopy (PCS). The effects of kinetic parameters on the polymerization were evaluated. The particle size of latex underwent almost no change during microwave irradiation polymerization. The diameters of latex particles prepared by microwave irradiation were smaller and more monodispersed than those prepared by conventional heating and the latex had good centrifugal stability. Polymerization under microwave irradiation had a higher reaction rate and higher conversion than traditional heating. By using 10 wt% fluoromonomer, the surface energy of the latex film could be reduced from 27.24 mJ/m² (latex film of fluorine-free) to 17.59 mJ/m² and the decomposition temperature increased by 25 °C.     

Preparation and characterization of hybrid cationic hydroxyethyl cellulose/sodium alginate polyelectrolyte antimicrobial films

This study aimed to develop polyelectrolyte‐structured antimicrobial food packaging materials that do not contain any antimicrobial agents. Cationic hydroxyethyl cellulose was synthesized and characterized by Fourier‐transform infrared, ¹H NMR, and ¹³C NMR spectroscopy. Its nitrogen content was determined by Kjeldahl method. Polyelectrolyte‐structured antimicrobial food packaging materials were prepared using hydroxyethyl cellulose, cationic hydroxyethyl cellulose, and sodium alginate. Antimicrobial activity of materials was defined by inhibition zone method (disc diffusion method). Thermal stability of samples was evaluated by thermal gravimetric analysis and differential scanning calorimetry. Surface morphology of samples was investigated by SEM. The obtained results prove that produced food packaging materials have good thermal and antimicrobial properties, and they can be used as food packaging material in many industries.