Polymer-Enhanced Ultrafiltration of Fe(III) and Cu(II) Aqueous Solutions Using Poly(Vinyl Alcohol)-Alginic Acid/Cellulose Membranes

This study deals with the removal of Fe(III) and Cu(II) from dilute aqueous solutions using a polymer-enhanced ultrafiltration process. The ultrafiltration studies were carried out in batch stirred cell and the applied pressure was controlled by nitrogen gas. Properties of the composite membranes and its application in metal removal from aqueous solutions were studied. A composite poly(vinyl alcohol)-alginic acid/cellulose membranes were prepared by coating poly(vinyl alcohol)-alginic acid mixture solutions on the filter paper. Poly(vinyl alcohol) and alginic acid were also used as complexing agents to enhance the retention of metal ions. In the filtration of Fe(III) and Cu(II) solutions, the effects of membrane contents, pressure and pH on the retention and the flux were studied. The maximum retention of metals was found as 99% for Fe(III) solution at pressure of 45 psi, pH of 3 in the presence of poly(vinyl alcohol) as complexing agent by using 0.50 (w/v)% [(75 Poly(vinyl alcohol)/25 Alginic acid) (w/w)]/cellulose composite membranes.     

Studies on synthesis,determination of CMC values,kinetics and the mechanism of iron(II) reduction of surfactant–Co(III)–ethylenediamine complexes in aqueous acid medium

The surfactant–Co(III) complexes of the type cis-[Co(en)₂AX]²⁺ (A?=?Tetradecylamine, X?=?Cl^?,?Br^?) were synthesised from corresponding dihalogeno complexes by the ligand substitution method. The critical micelle concentration (CMC) values of these surfactant complexes in aqueous solution were obtained from conductance measurements. The kinetics and mechanism of iron(II) reduction of surfactant–Co(III) complexes, cis-[Co(en)₂(C₁₄H₂₉NH₂)Cl](ClO₄)₂ and cis-[Co(en)₂(C₁₄H₂₉NH₂)Br] (ClO₄)₂ ions were studied spectrophotometrically in an aqueous acid medium by following the disappearance of Co(III) using an excess of the reductant under pseudo-first-order conditions: [Fe(II)]?=?0.25?mol?dm^?3, [H⁺]?=?0.1?mol?dm^?3, [μ]?=?1.0?mol?dm^?3 ionic strength in a nitrogen atmosphere at 303, 308 and 313?K. The reaction was found to be of second order and showed acid independence in the range [H⁺]?=?0.05–0.25?mol?dm^?3. The second-order rate constant increased with surfactant–Co(III) concentration and the presence of aggregation of the complex itself altered the reaction rate. The effects of [Fe(II)], [H⁺] and [μ] on the rate were determined. Activation and thermodynamic parameters were computed. It is suggested that the reaction of [Fe(II)] with Co(III) complex proceeds by an inner-sphere mechanism.     

Determination of Metal Ions in Natural Waters by Flame-AAS after Preconcentration on a 5-Amino-1,3,4-Thiadiazole-2-Thiol Modified Silica Gel.

ABSTRACT

5-amino-1,3,4-thiadiazole-2-thiol groups attached on a silica gel surface have been used for adsorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II), Pb(II) and Zn(II) from aqueous solutions. The adsorption capacities for each metal ion were (in mmol.g^?1): Cd(II)= 0.35, Co(II)= 0.10, Cu(II)= 0.15, Fe(III)= 0.20, Hg(II)= 0.46, Ni(II)= 0.16, Pb(II)= 0.13 and Zn(II)= 0.15. The modified silica gel was applied in the preconcentration and quantification of trace level metal ions present in water samples (river, and bog water).     

Synthesis of Some Polymer‐Metal Complexes and Elucidation of their Structures

In this study, the nine coordination polymers of Fe(III), Co(II) and Ni(II) salts have been synthesized using polyacrylamide (PAA), polt(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA) and their structures were characterized by magnetic and conductivity measurements, ultraviolet‐visible (UV‐VIS), FTIR spectroscopy and thermogravimetric analysis (TGA). The structures of Fe(III) complexes in the all coordination polymers were found as tetrahedral. The structures of PAA‐Co(II) coordination polymer was determined as octahedral geometry whereas PEG‐Co(II) and PVA‐Co(II) complexes showed as tetrahedral structure. PAA‐Ni(II) and PEG‐Ni(II) complexes have octahedral geometry, whereas PVA‐Ni(II) has a square planar structure. Besides, the stress‐strain experiments of PVA‐metal coordination polymers obtained rubber‐like structure were carried out and the value of breaking‐strain of PVA‐Ni(II) complex was found to be about 17% of vulcanized natural rubber. The conductivities of the resulting polymer‐metal complexes were measured by four‐probe technique and were found in the range 10^?5?10^?6 Scm^?1. Thus, it was suggested that they can be used in the field potential application of conducting polymers. TGA results revealed that among the complexes PEG‐Fe(III) and PVA‐Fe(III) complexes have the highest thermally stable.     

The outer-sphere association of p-sulfonatothiacalix[4]arene with some Co(III) complexes: the effect on their redox activity in aqueous solutions

The effect of the ion-pairing of Co(III) complexes with p-sulfonatothiacalix[4]arene (STCA) on Fe(II)–Co(III) electron transfer rate was evaluated from the analysis and comparison of kinetic data in double Co(III)–Fe(II) and triple Co(III)–Fe(II)—STCA systems at various concentration conditions. Complexes [Co(en)₃]³⁺(1), [Co(en)₂ox]⁺(2), [Co(dipy)₃]³⁺ (3), [Co(His)₂]⁺(4) and [Fe(CN)₆]⁴⁻ were chosen as Co(III) and Fe(II) compounds. The effect of STCA was found to correlate with the association mode. The outer-sphere association with STCA was found to exhibit the insignificant effect on Fe(II)–Co(III) electron transfer k _et constants for complexes 3 and 4 with bulky and rigid chelate rings, while more sufficient inclusion of flexible ethylendiaminate rings of 1 and 2 into the cavity of STCA results in the unusual increase of k _et.     

Synthesis of Mesoporous Lanthanum Phosphate and Its Use as a Novel Sorbent

Mesoporous lanthanum phosphate was synthesized by supramolecular self-assembly of cetyltrimethylammo-nium bromide and lanthanum nitrate following digestion in phosphoric acid.TGA-DTA,XRD and SEM were em-ployed to study the uncalcined and calcined materials.Sorption behavior of Cr(Ⅲ),Mn(Ⅱ),Fe(Ⅲ),Co(Ⅱ),Ni(Ⅱ),Cu(Ⅱ),Zn(Ⅱ),Cd(Ⅱ),Ba(Ⅱ),Hg(Ⅱ)and Pb(Ⅱ)cations was studied on such materials in water,3 mol·L~(-1)ammonia,0.01 mol.L~(-1)potassium ferrocyanide and 0.01 mol·L~(-1)potassium ferricyanide solutions.     

Novel Polymeric Membrane Sensors Based on Mn(III) Porphyrin and Co(II) Phthalocyanine Ionophores for Batch and Flow Injection Determination of Azide

Two novel potentiometric azide membrane sensors based on the use of manganese(III)porphyrin [Mn(III)P] and cobalt(II)phthalocyanine [Co(II)Pc] ionophores dispersed in plasticized poly(vinyl chloride) PVC matrix membranes are described. Under batch mode of operation, [Mn(III)P] and [Co(II)Pc] based membrane sensors display near‐ and sub‐Nernstian responses of ?56.3 and ?48.5 mV decade^?1 over the concentration ranges 1.0×10^?2?2.2×10^?5 and 1.0×10^?2?5.1×10^?5 mol L^?1 azide and detection limits of 1.5×10^?5 and 2.5×10^?5 mol L^?1, respectively. Incorporation of both membrane sensors in flow‐through tubular cell offers sensitive detectors for flow injection (FIA) determination of azide. The intrinsic characteristics of the [Mn(III)P] and [Co(II)Pc] based detectors in a low dispersion manifold show calibration slopes of ?51.2 and ?33.5 mV decade^?1 for the concentration ranges of 1.0×10^?5?1.0×10^?2 and 1.0×10^?4?1.0×10^?2 mol L^?1 azide and the detection limits are1.0×10^?5 and 3.1×10^?5 mol L^?1, respectively. The detectors are used for determining azide at an input rate of 40–60 samples per hour. The responses of the sensors are stable within ±0.9 mV for at least 8 weeks and are pH independent in the range of 3.9?6.5. No interferences are caused by most common anions normally associated with azide ion.     

Simultaneous determination of metal ions. Catalytic oxidation of cobalt by metal ions when extracted with quinolin-8-ol

The catalytic effect of various ions on the aerial oxidation of Co(II) when extracted from weakly acidic solutions with quinolin-8-ol in chlorofom was studied. Oxidation is complete only in the presence of Fe(III) or V(V). Mixtures of Al(III), Cu(II), Fe(III) and Ni(II) with Co(II) at concentrations in the range 1–8 μg ml^?1 were analysed by using a multi-component analysis program involving first-order derivative spectra. Because of the metal ion interaction, a multivariate calibration process is required. The recovery factors achieved ranged from 93 to 111%.     

Syntheses,spectroscopic, and magnetic properties of polystyrene-anchored coordination compounds of tridentate ONO donor Schiff base

The crosslinked chloromethylated polystyrene (PSCH₂–Cl) reacts with the Schiff base, derived from condensation of PSCH₂–Cl with 3-formylsalicylic acid and salicylhydrazide to form a polystyrene-anchored Schiff base, PSCH₂–LH₃ (1). Compound 1 reacts with a number of metal ions to form polystyrene-anchored coordination compounds, PSCH₂–LHM?·?DMF (where M?=?Cu, Zn, Cd, UO₂, and MoO₂), PSCH₂–LHM′?·?3DMF (where M′?=?Mn, Co, and Ni), PSCH₂–LHFeCl?·?2DMF, and PSCH₂–LHZr(OH)₂?·?2DMF. The polystyrene-anchored coordination compounds have been characterized by elemental analyses, spectra (infrared, reflectance, and electron spin resonance) and magnetic susceptibility measurements. The polystyrene-anchored compounds are magnetically dilute. Shifts in band positions of the groups involved in coordination have been utilized to find tridentate ONO donor behavior of 1. The polystyrene-anchored Zn(II), Cd(II), Zr(IV), MoO₂(VI), and UO₂(VI) compounds are diamagnetic, while Mn(II), Co(II), Ni(II), Cu(II), and Fe(III) compounds are paramagnetic. The polystyrene-anchored Cu(II) compound is square planar; Zn(II) and Cd(II) compounds are tetrahedral; Co(II), Ni(II), Mn(II), Fe(III), MoO₂(VI), and UO₂(VI) compounds are octahedral; and Zr(IV) compound is pentagonal bipyramidal.     

Synthesis,crystal structures,and magnetic properties of three K[M(bpb)(CN)2]-based trinuclear sandwich-like heterobimetallic M(III)–Ni(II) (M = Fe,Cr, Co) complexes

Three trinuclear sandwich-type cyanide-bridged M^III–Ni^II complexes, {[Ni(cyclm)[Fe(bpb)(CN)₂]₂}·8H₂O (1), {[Ni(cyclm)[Cr(bpb)(CN)₂]₂}·2H₂O (2), and {[Ni(cyclm)[Co(bpb)(CN)₂]₂}·CH₃OH·2H₂O (3) (cyclm?=?1,4,8,11-tetraazacyclotetradecane), have been synthesized using K[M(bpb)(CN)₂] (M?=?Fe, Cr, Co; bpb?=?1,2-bis(pyridine-2-carboxamido)benzenate) as building block and one Ni(II) compound containing a 14-membered macrocycle ring as assembling segment. All the complexes have been characterized by elemental analysis, IR spectroscopy, and X-ray structure determination. Single X-ray diffraction analysis shows similar sandwich-like structures, in which the two cyanide-containing building blocks are monodentate through one of their two cyanides, coordinated face to face to the central Ni(II). Investigation of the magnetic properties of 1 and 2 reveals ferromagnetic magnetic coupling between the neighboring Fe(III)/Cr(III) and Ni(II) through the bridging cyanide. A best-fit to the magnetic susceptibilities of 1 and 2 based on the trinuclear M₂Ni model leads to magnetic coupling constants J?=?5.47(1)?cm^?1 for 1 and J?=?6.37(2)?cm^?1 for 2.     

Effect of Pyruvate on the Redox Behavior of the Iron (III)-(II) Couple

Abstract

Evidence for the formation of Fe(III) and Fe(II) complexes with pyruvate ion is presented. Complexes with a 1:2 ratio of Fe(II) to pyruvate and 1:1 ratio of Fe(III) to pyruvate were identified by spectrophotometry. The complexation results in partial kinetic control of the electrochemical oxidation of Fe(II) in citrate buffer. In addition, Fe(III) was found to be chemically reduced by pyruvate. The apparent first order rate constant at 25[ddot]C is 7.12 × 10^?2 s ^?1in pH 4.0 pyruvate buffer and 1.24 × 10^?1 s ^?1 in pH 3.2 pyruvate buffer. In pH 4.0 citrate buffer the reaction is not first order and is significantly slower.     

INTERACTIONS OF COBALT(II) TETRASULFOPHTHALOCYANINE WITH NITRITE IN THE PRESENCE OF NITRATE AND PERCHLORATE IONS

Abstract

Spectroscopic changes observed on addition of nitrite to solutions of cobalt(II) tetra-sulfophthalocyanine ([Co(II)TSPc]^4-) in the presence of N^? ₃ or ClO^? ₄ are reported. There is spectroscopic evidence for the oxidation of [Co(II)TSPc]^4- to a [Co(III)TSPc]^3- species in the presence of nitrite ions. Equilibrium and kinetic studies for the interaction between [Co(II)TSPc]^4- and NO^? ₂ are reported. The rate was found to be first order in both [Co(II)TSPc]^4- and NO^? ₂. The rate constant for the forward reaction, k _f=1.6 × 10^?4 dm³mol^?1s^?1 was determined at 20°C for the interaction between nitrite ions and [Co(II)TSPc]^4- in the presence of NO₃ ^? or ClO₄ ^? ions.     

Synthesis,structures, and characterization of copper(II), nickel(II), and cobalt(III) metal complexes derived from an asymmetric bidentate Schiff-base ligand

An asymmetric bidentate Schiff-base ligand (2-hydroxybenzyl-2-furylmethyl)imine (L–OH) was prepared. Three complexes derived from L–OH were synthesized by treating an ethanolic solution of the appropriate ligand with an equimolar amount of metallic salt. Three complexes, Cu₂(L–O^?)₂Cl₂ (1), Ni(L–O^?)₂ (2) and Co(L–O^?)₃ (3), have been structurally characterized through elemental analysis, IR, UV spectra and thermogravimetric analysis. Single crystal X-ray diffraction shows metal ions and ligands reacted with different proportions 1?:?1, 1?:?2 and 1?:?3, respectively, so copper(II), nickel(II), and cobalt(III) have different geometries.     

Solvent Extraction Studies of Metal-4-(2-pyridyl-azo)-Resorcinol Complexes with Potassium-Dicyclohexyl-18-crown-6 Complex

Abstract

The solvent extraction studies of Pd(II), V(V), Co(III), Cu(II), Ni(II) and Fe(II)-PAR [4 - (2-pyridyl azo)-resorcinol] complexes with dicyclohexyl-18-crown-6 have been investigated in 1,2-dichloroethane as a solvent. It was observed that the complexes of Pd(II), V(V), Co(III), Cu(II), Ni(II) and Fe(II)-PAR were extracted into organic phase. In order to investigate the effect of enthalpy and entropy in the extraction of metal-PAR complexes, an attempt has been made to explore the temperature effect. In the extraction studies, it was observed that the entropy effect is one of the major factors for the selective extraction. The shape of the complexes may be one of the causes for the extractability of metal-PAR complexes with potassium dicyclohexyl-18-crown-6. The planar palladium-PAR-SCN^? complex was easily extracted into organic phase in comparison with other complexes.     

Self‐Assembled Monolayers of Cobalt and Iron Phthalocyanine Complexes on Gold Electrodes: Comparative Surface Electrochemistry and Electrocatalytic Interaction with Thiols and Thiocyanate

The self‐assembling of the octa(hydroxyethylthio)‐metallophthalocyanine {MOHETPc (M=Co and Fe)} complexes and their similar analogues, octabutylthiometallophthalocyanine {MOBTPc (M=Co and Fe)} complexes on gold electrodes are investigated. Comparative surface voltammetric insights into their distinct self‐assembling properties with respect to the passivation of Faradaic processes and surface coverages, including their solution electrochemistry, suggest different orientations and non‐cleavage of their C? S bonds. In the pH 2?9 range, the reversible [M^(III)Pc(?2)]⁺ / [M^(II)Pc(?2)] redox couples show potential shifts close to ?59 mV / pH. The gold electrodes modified with the SAMs of these species show electrocatalytic activity towards the oxidation of thiols (L ‐cysteine, homocysteine and penicillamine) and thiocyanate in acidic media with detection limits in the region of 10^?7–10^?6 mol dm^?3. These monolayers are stable and easily reproducible.     

Preparation of sinapinaldehyde modified mesoporous silica materials and their application in selective extraction of trace Pb(II)

A new solid phase extractant, sinapinaldehyde (SA) modified SBA-15 mesoporous silica, was developed for selective extraction and preconcentration of trace Pb(II) from aqueous solutions. The successful immobilization of SA on SBA-15 and the strong interaction between SA-SBA-15 and Pb(II) were characterized and confirmed by FTIR spectroscopy and scanning electron microscopy. Parameters such as solution pH, shaking time, eluent condition and sample volume were optimized so that the maximum removal of Pb(II) from solution could be achieved. At pH 4.0, the maximum adsorption capacity of the sorbent for Pb(II) was found to be 33.6?mg?g^?1 and the adsorbed Pb(II) could be completely eluted using a mixed solution of 2?M HCl and 5% CS(NH₂)₂. Some common metal ions such as K(I), Na(I), Mg(II), Ca(II), Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) did not interfere with the adsorption of trace Pb(II). The detection limit of the present method was found to be 1.3?ng?mL^?1 and the relative standard deviation was less than 2.0% (n?=?8). These results suggested that this new sorbent is very efficient and selective for the removal of trace Pb(II) in water samples.     

Flotation Separation of Lead with Sodium Nitrate‐Potassium Iodide‐Cetyltrimethyl Ammonium Bromide System

The flotation separation behavior of lead with Sodium Nitrate‐Potassium Iodide‐Cetyltrimethyl Ammonium Bromide system and the conditions for the separation of lead with other metal ions are studied in this research. With 0.1 M potassium iodide, 1.0 × 10^?2 M Cetyltrimethyl Ammonium Bromide and 1.0 g/10 mL of sodium nitrate, Pb(II) can form an ion‐association complex (PbI₄^2?) (CTMAB⁺)₂ and be separated completely from Zn(II), Fe(III), Co(II), Ni(II), Mn(II) and Al(III) by flotation at pH = 1.0–3.0.     

Cadmium Preconcentration from Aqueous Environmental Samples Using Microcrystalline Phenolphthalein Modified by Crystal Violet

Abstract

The present work describes a novel method for cadmium preconcentration and separation with microcrystalline phenolphthalein. Phenolphthalein as an extractant modified by crystal violet was originally applied to cadmium extraction from aqueous solution. Cadmium(II) as CdI₃ ^? and CdI₄ ^2? can associate with the cationic crystal violet (CV⁺) forming water‐insoluble ion‐association complexes (CdI₃ ^?) · (CV⁺) and (CdI₄ ^2?) · (CV⁺)₂, which are quantitatively adsorbed on microcrystalline phenolphthalein over the pH range from 1.0 to 6.0. All experimental parameters necessary for successful preconcentration and separation have been investigated and optimized. The study shows that common metal ions, such as Zn(II), Fe(II), Co(II), Ni(II), Mn(II), Cr(III) and Al(III), cannot interfere with cadmium extraction in this microcrystalline system by controlling acidity. The extraction can be accomplished in 15 min. The interaction between CdI₃ ^?and CdI₄ ^2? and CV⁺ plays an important role in the extraction process. The reported method was successfully applied to the preconcentration and separation of cadmium in synthetic samples and real samples with satisfactory results. The results proved that it is an efficient and attractive technique for cadmium preconcentration and separation at trace level.     

Some synthesized polymeric composite resins for the removal of Co(II) and Eu(III) from aqueous solutions

Summary The ion-exchange and sorption characteristics of new polymeric composite resins, prepared by gamma radiation were experimentally studied. The composite resins show high uptake for Co(II) and Eu(III) ions in aqueous solutions in a wide range of pH. The selectivity of the resins for Co(II) or Eu(III) species in presence of some competing ions and complexing agents (as Na⁺, Fe³⁺, EDTANa₂, etc.) was compared. Various factors that could affect the sorption behavior of metal ions (Co(II) and Eu(III)) on the prepared polymeric composite resins were studied such as ionic strength, contact time, volume mass ratio.     

Synthesis and Properties of Double Complex Salts Containing the Cation [Co(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>]<Superscript>3+</Superscript>

A series of complexes [Co(NH₃)₆] _x [ML₆₍₄₎] _y , where M is Fe(III) and Fe(II), Cr(III), Cu(II); L is CN^?, NCS^?, 1/2C₂O ₄ ^2? , are synthesized. Their IR spectra and thermal decomposition in air are studied, and interplanar distances in crystalline lattices of the complexes are determined. The compounds can be used as precursors for producing homogeneous bimetallic nanodimensional powders.