溶剂热制备氧化锌纳米线

ZnO nanowires were synthesized mildly through an absolute alcohol solvothermal process at 120 ℃ for 12 h using ZnAc₂·2H₂O and NaOH as raw materials and PEG400 as a soft template. The cyrstal structure and morphology of the nanowires were characterized by XRD, SEM, TEM and HRTEM. The results indicate that the diameter of ZnO nanowires is 40 nm, the length can reach 2 μm and the nanowires are of high purity, homogeneity and well crystallinty. The influence of the various factors on the formation of ZnO nanowires and formation mechanism were also discussed.     

手性双核Salen配合物的合成与谱学性质

Six novel chiral dinuclear Salen complexes [Cu₂L₁·H₂O (3a), Cu₂L₂(3b), Ni₂L₁·2H₂O (4a), Ni₂L₂(4b), Mn₂Cl₂L₁·H₂O (5a), Mn₂Cl₂L₂ (5b)] have been synthesized(L₁ and L₂ are chiral dimeric Salen ligands with different chain length which were synthesized from (R,R)-diaminocyclohexane, salicylaldehyde, 4,4′-(1,10-decaneoxy)salicylaldehyde, 4,4′-(1,6-hexyloxy)salicylaldehyde). These compounds were charactered by elemental analysis, ¹H NMR, FT-IR, UV-Vis and CD spectra. The FT-IR, UV-Vis and CD spectra were discussed and compared with those of monomeric ligand and complex in detail. It was found that the spectra properties of compounds of different chain length were almost alike, and the properties of dimeric and monomeric compound were similar too. Furthermore Cotton effect and Cotton split of CD spectra of these chiral compounds were explained by the exciton interaction theory. It seemed that the direction of Cotton split depend on the configuration of diaminohexane. (R,R)-diaminohexane determine the chirality of Salen compounds as negative, and the positive and negative component of Cotton split lie at higher and lower energy respectively.     

不同温度下选择性合成硫氰酸亚铜与硫化亚铜微晶

Hexagonal CuSCN and cubic Cu₂S micro-scale crystallites have been selectively fabricated using CuCl₂·2H₂O and KSCN as the starting materials at 30 ℃ and 220 ℃, respectively. The results reveal that the reaction temperature plays a key role in obtaining pure phase of CuSCN and Cu₂S crystallites. Nearly monodispersed Cu₂S nanocrystals were prepared by introducing surfactant into reaction system. The possible reaction mechanism is also discussed.     

羟基功能化离子液体中Ag纳米材料的制备及结构表征

Ag nanoparticles were prepared using hydroxyl-functionalized ionic liquids as reductant and reaction medium. Nanoparticles with different particle sizes were obtained by using ionic liquids with different structures, while nanorods were harvested when the reaction temperature was increased. The materials obtained were investigated by XRD and TEM. The results indicate that the crystal is in face-centred cubic structure for both of Ag nanoparticles and nanorods, and the diameter of Ag nanoparticles prepared in 1-ethoxyl-3-methyl imidazolium tetrafluoroborate ([C₂OHmim]BF₄), 1-(4′-hydroxyl)butyl-3-methyl imidazolium tetrafluoroborate ([C₄OHmim]BF₄) and 1-(6′-hydroxyl)hexyl-3-methyl imidazolium tetrafluoroborate ([C₆OHmim]BF₄) ionic liquid is about 25, 15 and 10 nm, respectively. And the diameter of Ag nanorods is about 200 nm and 2 μm in length. Finally, the formation mechanism of Ag nanoparticles and nanorods is proposed.     

Cu1-xAgxI(x=0.5～0.6)纳米微粒的制备与表征

In the presence of PVPK30,Cu_1-xAg_xI nanoparticles were prepared by ion exchange reaction.The product was characterized by FT-IR,XRD,TEM,EDS and SPS,respectively.It was found that the value of x is ap-proximately 0.5～0.6and the average diameter of the nanoparticles is 10～20nm.The product shows surface photovoltage property of semiconductor and the existence of Cu⁺ greatly enhances the separation efficiency of photoinduced electron-hole pairs.Meanwhile,SPS of Cu_1-xAg_xI nanoparticles with different X (Ag/I)value had been investigated. The results show that when X is 0.5～0.576, the SPS intensity of Cu_1-xAg_xI nanoparticles is highest.     

Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

锂离子电池负极合金CoSn和Cu-Sn的制备与表征

CoSn alloy and Cu-Sn samples were synthesized by H₂-reduction following solid-state reaction between Co(Ⅱ)， Cu(Ⅱ)， Sn(Ⅳ) and NaOH at ambient temperature. The samples were characterized by XRD， SEM. The results showed that CoSn alloy (80～200nm) is globe-shaped， ultrafine hexagonal material， and Cu-Sn alloy powder consists of two phases， i.e. Cu₆Sn₅ and Cu₃Sn. Cu-Sn powder has spherical morphology and the particle size is estimated to be 60～70nm. The electrochemical performances of CoSn alloy and Cu-Sn powder were studied using lithium-ions model cell Li/LiPF₆ (EC+DMC)/CoSn (or Cu-Sn). It was demonstrated the reversible discharge capacities for 10 cycles keep above 280mAh·g^-1 for nanophase Cu-Sn， and 60mAh·g^-1 for CoSn alloy. Differ-ential capacity plots showed that the reaction mechanisms of Cu-Sn with lithium were reversible.     

超声化学法制备树枝状纳米银的研究

Nanostructured silver dendrites were synthesized by using sonochemical method from an aqueous solution of AgNO₃ in the presence of isopropanol as reducing agent and polyethylene glycol (PEG) as disperser. The silver nanostructures were characterized by using TEM， XRD and EDS analysis. The effects of reducing agents， dispersers， concentration of AgNO₃ on the silver dendrites nanostructures were also invetigated. A well-defined nanostructured silver dendrite was prepared by ultrsonic irradiation of the aqueous solution of 0.04 mol·L^-1 silver nitrate， 4.00 mol·L^-1 isopropanol and 0.04 mol·L^-1 PEG400 for 1 h.     

溶胶凝胶法合成莫来石纳米带

Single-crystal mullite nanobelts were prepared by a simple sol-gel method using WO₃ as additive, and nanobelts were straight and uniform with width of 200 nm and length of 3~4 μm. The as-prepared products were characterized with XRD, SEM and TEM and the nanobelt formation mechanism was also discussed. The interphase of aluminium tungstate acted as seed crystals or epitaxial templates during the formation of nanobelts. The further experiments showed that there was a strong correlation between the formation of nanobelts and the presence of WO₃.     

铁酸钴纳米微粒的共沉淀法制备和磁性质(英)

The cobalt ferrite nanoparticles were prepared by coprecipitation in the presence of poly (N-vinylpyrrolidone) (PVP) and characterized by XRD, TEM, EDX and magnetometry. XRD results suggest the formation of pure cobalt ferrite. The mean particle sizes of CoFe₂O₄ samples annealed at 400 ℃ and 600 ℃ were ca. 6 and 25 nm, respectively as obtained by transmission electron microscopy (TEM). The magnetic measurements indicated that nano-particles obtained at 400 ℃ were superparamagnetic while that prepared at 600 ℃ were ferrimagnetic.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.