Pyrrolidine synthons for β-lactams

Fused tricyclic aziridines, methyl rel-(2R,2aR,3R,4R,4aR,4bS)- and rel-(2S,2aR,3R,4R,4aR,4bS)-4-hydroxy-2,4a-dimethoxyhexahydro-1-oxa-2b-azacyclopropa[cd]pentalene-3-carboxylates, have been synthesized as possible precursors to β-lactams. The product structure has been determined by two-dimensional NMR techniques in combination with computational methods.     

Synthesis of 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1<Emphasis Type="Italic">H</Emphasis>-imidazo-[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids

Nitration of 2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-one gave its 5-nitro derivative which was subjected to alkylation with dimethyl sulfate, diethyl sulfate, and benzyl(dimethyl)phenylammonium chloride. The resulting 1,3-dimethyl-, 1,3-diethyl-, and 1,3-dibenzyl-5-nitro-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones were reduced to the corresponding 1,3-dialkyl-5-amino-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones, and the latter reacted with itaconic acid to produce 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids. 1-(2-Oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acid was obtained by analogous reaction with 5-amino-2,3-dihydro-1H-imidazo[4,5-b]-pyridin-2-one.     

New donor–acceptor copolymers with ultra-narrow band gap for photovoltaic application

Two novel donor–acceptor (D–A) copolymers P1 and P2 with the thiazoloquinoxaline repeating acceptor moiety and different donor moieties of benzo[1,2-b:4,5-b']dithiophene and isomeric benzo[2,1-b:3,4-b']dithiophene have been prepared. The polymers show light absorption at 300–1200 nm and a band gap width of 0.98 and 1.14 eV, respectively. The energies of the HOMO (–5.42 and–5.29 eV) and LUMO (–3.90 and–3.83 eV) levels of polymers P1 and P2 have been determined. The absorption maximum for polymer P1 in the long-wavelength region is red-shifted by 161 nm, which is caused by stronger charge transfer in P1 as compared with P2. This fact indicates that the benzo[1,2-b:4,5-b']dithiophene structural moiety has a higher electron-donating ability than the benzo[2,1-b:3,4-b']dithiophene moiety. The red shift of the absorption spectrum of polymer P1 in comparison with that of P2 indicates that interchain π–π stacking interactions are more efficient in P1 than in P2.     

Effect of Halogen Chain End Fidelity on the Synthesis of Poly(methyl methacrylate-<Emphasis Type="Italic">b</Emphasis>-styrene) by ATRP

Poly(methyl methacrylate-b-styrene) (PMMA-b-PS) block copolymers are synthesized by two consecutive ATRPs and fractionated into four fractions. The halogen chain end fidelity (CEF) in PMMA-b-PS is quantified based on the analysis of each fraction. Compared to ethyl 2-phenyl-2-bromoacetate/CuBr/2,2′-bipyridine (EPBA/CuBr/bpy) and CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine (CuBr/PMDETA) catalysts, PMMA-b-PS synthesized using p-toluenesulfonyl chloride/CuCl/bpy (TsCl/CuCl/bpy) and CuCl/PMDETA catalysts has a higher halogen CEF and a better control on molecular weight.     

Acceptor-donor-acceptor conjugated oligomers based on diketopyrrolopyrrole and thienoacenes with four,five and six rings for organic thin-film transistors

Three acceptor-donor-acceptor(A-D-A) conjugated oligomers, i.e., O1, O2 and O3, have been synthesized using diketopyrrolopyrrole(DPP) as an electron-acceptor unit, and naphtho[1,2-b:5,6-b']dithiophene(NDT), anthra[1,2-b:5,6-b']dithiophene(ADT) or dithieno[3,2-b:3',2'-b']naphtho[1,2-b:5,6-b']dithiophene(DTNDT) as electron-donor unit. These oligomers exhibit identical highest occupied molecular orbital(HOMO) and lowest unoccupied molecular orbital(LUMO) energy levels, which were ca.-5.1 and-3.3 eV, respectively. Upon thermal annealing, all three oligomers formed thin films with ordered microstructures, and their organic thin film transistors(OTFTs) exhibited p-type transport behavior. The mobility was increased with an extension of the size of D-units. O3 showed the best OTFT performance with the mobility of up to 0.20 cm~2·V~(-1)·s~(-1). The film quality of O3 was improved by adding 1 wt% poly(methylmethacrylate)(PMMA). In consequence, the mobility of the O3-based devices was further enhanced to 0.30 cm~2·V~(-1)·s~(-1).     

Reactions of 1,3-Dialkyl-5-amino-1,3-dihydro-2<Emphasis Type="Italic">H</Emphasis>-imidazo-[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-2-ones with acetylacetone and ethyl acetoacetate

1,3-Dialkyl-5-amino-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones reacted with acetylacetone to give the corresponding 4-(1,3-dialkyl-2-oxo-1,3-dihydro-2H-imidazo[4,5-b]pyridin-5-ylamino)pent-3-en-2-ones which underwent intramolecular cyclization to 1,3-dialkyl-5,7-dimethyl-1,3-dihydro-2H-imidazo[4,5-b]-[1,8]naphthyridin-2-ones on heating in polyphosphoric acid or diphenyl ether. Analogous reaction of 1,3-dialkyl-5-amino-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones with ethyl acetoacetate led to the formation of ethyl 3-(1,3-dialkyl-2-oxo-1,3-dihydro-2H-imidazo[4,5-b]pyridin-5-ylamino)but-2-enoates whose cyclization afforded 1,3-dialkyl-8-hydroxy-7-methyl-1,3-dihydro-2H-imidazo[5,4-b][1,8]naphthyridin-2-ones.     

Synthesis and antimicrobial activity of novel fused [1,2,4]triazino[5,6-<Emphasis Type="Italic">b</Emphasis>]indole derivatives

Synthesis of new fused systems of triazino[5,6-b]indole starting with preparation of 3-amino[1,2,4]-triazino[5,6-b]indole 1 by reaction of isatin with 2-aminoguanidinium carbonate in boiling acetic acid is presented [1]. Intermediate compound 1 reacted with aldehyde, ethyl chloroformate, triethyl orthoformate, and ninhydrine and gave new heterotetracyclic nitrogen systems, such as 3-(N ²-guanidinylimino)indole-2(1H)-one 2, 3-(N-ethoxycarbonylamino)-4H-[1,2,4]triazino[5,6-b]indole 3, 3-(N-ethoxymethyleneamino)-4H-[1,2,4]-triazino[5,6-b]indole 4, 3-(hydrazinothiocarbonylamino)-4H-[1,2,4]triazino[5,6-b]indole 5, respectively. N-(1,3-dioxoindene-2-ylidene)-4H-[1,2,4]triazino[5,6-b]indol-3-amine 6 was synthesized by reaction of compound 1 with aldehyde, ethyl chloroformate, triethyl orthoformate, and ninhydrine. New fused indole systems, pyrimido[2′,1′:3,4][1,2,4]triazino[5,6-b]indol-3(4H)-one 8, 9, 11, 12 and 1H-imidazo[2′,1′:3,4][1,2,4]triazino-[5,6-b]indol-2(3H)-one 10, were synthesized in the reaction of the intermediate 1 with bifunctional compounds. Structures of the products were elucidated from their elemental analysis and spectral data (IR, ¹H and ¹³C NMR and mass spectra). Antimicrobial activity of some synthesized compounds was tested.     

Sc(OTf)<Subscript>3</Subscript> catalyzed synthesis of novel 6-phenyl-6<Emphasis Type="Italic">H</Emphasis>-chromeno[4,3-b]quinolines and evaluation of their cytotoxicity

Novel 6-phenyl-6H-chromeno[4,3-b]quinoline derivatives have been prepared by reaction of 4-chloro-2-phenyl-2H-chromene-3-carbaldehyde with various aromatic amines using 5 mol % of Sc(OTf)3 in acetonitile. This is the first example of one-pot synthesis of 6-phenyl-6H-chromeno[4,3-b]quinoline from 4-chloro-2-phenyl-2H-chromene-3-carbaldehyde at ambient temperature. Preliminary evaluation of cytotoxic activity of these chromeno[4,3-b]quinoline derivatives has been carried out. Some products exhibited anti cancer activity against two carcinoma cell lines A549 and B-16.     

Nitration of 1,3-dihydro-2<Emphasis Type="Italic">H</Emphasis>-imidazo[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-2-one derivatives

Nitration of 1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-one and its N-methyl derivatives at 0–5°C and 60°C gives 5-nitro-and 5,6-dinitro-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones, respectively. The latter can also be obtained by nitration of 5-mononitro derivatives under similar conditions. The nitration of 6-chloro-and 6-bromo-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones and their N-methyl-substituted analogs leads to the formation of the corresponding 6-chloro(bromo)-5-nitro compounds. The same products are formed in the nitration of 5,6-dichloro-and 5,6-dibromo-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones. In this case, the process involves replacement of the halogen atom in position 5 of the pyridine fragment by nitro group. The nitration of 6-bromo-5-methyl-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-one is accompanied by oxidation of the 5-methyl group to carboxy.     

Estimation of boiling points of organic compounds at various pressures using recurrent relations

A new approach is proposed for the estimation of boiling points (T _b) of organic compounds at reduced pressure from their values at atmospheric pressure based on the application of a recurrent relation: T _b (log P + Δlog P) = aT _b (log P) + b. Estimation of coefficients in this relation for the compounds different by their chemical nature gives the following average values: a = 1.126, b = ?41.7. Successive application of this relation with Δlog P = 1 (that corresponds to 10-fold decrease in pressure) allows estimation of the T _b values at the pressure values of 100, 10 and 1 torr from the value of T _b (760 torr) by simple arithmetic calculation with an average accuracy about 8°C.     

Synthesis of New Cyclopenta[<Emphasis Type="Italic">b</Emphasis>]quinoline Derivatives

A series of new 11-(R-phenyl)-8,9-dihydro-7H-benzo[f]cyclopenta[b]quinolin-10(11H)-ones and 7,14-bis(R-phenyl)-2,3,9,10,11,14-hexahydrocyclopenta[2,3]quinolino[8,7-h]cyclopenta[b]quinoline-1,8(4H,7H)-diones were synthesized by three-component condensation of naphthalen-2-amine or naphthalene- 1,5-diamine with substituted benzaldehydes and cyclopentane-1,3-dione in one step through intermediate formation of unstable arylaminoketoenol.     

Synthesis and Structure of 4-Indolyl-5-(thieno[3,2-<Emphasis Type="Italic">b</Emphasis>]pyrrol-6-yl)imidazoles

A procedure was proposed for regioselective acylation of methyl 2-methyl-4H-thieno[3,2-b]-pyrrole-5-carboxylate with 2-(3-indolyl)-2-oxoacetyl chloride. Reactions of the resulting methyl 6-[2-(3-indolyl)-1,2-dioxoethyl]-2-methyl-4H-thieno[3,2-b]pyrrole-5-carboxylate with aromatic aldehydes and ammonium acetate in acetic acid afforded the corresponding methyl 6-[2-aryl-4-(3-indolyl)imidazol-5-yl]-2-methyl-4H-thieno[3,2-b]pyrrole-5-carboxylates. The structure of methyl 6-[2-(4-chlorophenyl)-4-(3-indolyl)imidazol-5-yl]-2-methyl-4H-thieno[3,2-b]pyrrole-5-carboxylate was studied by X-ray analysis.     

Synthesis and structure of bis(1,2-diaminoethane) copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-hydroxybenzoate) monohydrate and <Emphasis Type="Italic">trans</Emphasis>-diaquabis(1,2-diaminoethane)copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-aminobenzoate)

X-ray structural analysis has been performed for two complex compounds: Cu(en)₂(o-HB)₂H₂O (I) (a = 16.873(4) Å, b = 8.713(2) Å, c = 14.803(3) Å, β = 91.15(2)°, V = 2175.8(8) ų, C2/c, Z = 4, R(F) = 0.0263, 1516 reflections with I > 3σ (I)) and [Cu(en)₂(OH₂)₂]²⁺(o-AB^?)₂ (II) (a = 7.488(5) Å, b = 22.122(8) Å, c = 7.856(5) Å, β = 118.77(2)°, V = 1140.7(11) ų, P2₁/n, Z = 2, R(F) = 0.0432, 1684 reflections with I > 3σ(I)) synthesized under identical conditions (en is ethylenediamine, o-HB is o-hydroxybenzoate, and o-AB is o-aminobenzoate). Although the compounds were assumed to have similar structures and the Cu-Lig bond lengths and the cis and trans angles are acceptable for an octahedral structure, the geometric parameters of o-HB suggest that the copper atom has a plane square environment.     

Molecular orientation ordering in surface layers of polymer films

The spontaneous ordering of fragments of chain molecules near the surface in polymer films is described in terms of the multichain model that allows for local intra-and interchain orientational interactions of chain segments and for transverse fluctuation of their orientation in the approximation of strong planar-orientation order in the layers. Chain packing in the plane-ordered state is impossible unless the interchain interaction parameter has a value of b = 2K ₂/k _B T > b _c. The value of b _c decreases with a growth in chain rigidity (parameter a = 2K ₁/k _B T). The calculated dependence of the limiting values of the quadrupole orientation order parameter S ₀ on the length of the Kuhn statistical segment A = 2a reasonably well describes the experimental data obtained in a study of polymer-homolog (polysaccharide) films by means of the tilted polarized-beam technique at an interchain interaction parameter of b = 1.75. The monolayer thickness (d ? 10 mn) is films of some polysaccharides was calculated from the fit of the theoretical to the experimental dependences of the orientational order parameter and the birefringence on the number of layers.     

Structural investigation of salts containing ions [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>]<Superscript>2+</Superscript> and [IrF<Subscript>6</Subscript>]<Superscript>2–</Superscript>

Double complex salts (DCS) α-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/m, a = 6.3181(3) Å, b = 10.8718(5) Å, с = 7.4526(4) Å, β = 103.568(2)°), β-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/с, a = 8.5773(3) Å, b = 10.8791(4) Å, с = = 12.6741(3) Å, β = 122.497(2)°), [Pd(NH₃)₄]₃[IrF₆]₂Cl₂·H₂O (P-1, a = 7.6080(2) Å, b = 7.6274(2) Å, с = 11.8070(3) Å, β = 122.497(2)°), and [Pd(NH₃)₄]₂[IrF₆]NO₃ (Fm-3m, a = 11.21210(10) Å) have been synthesized and structurally characterized for the first time. The existence of polymorphs for the DCS has been revealed. The influence of the chemical composition of the initial reagents on the reaction course and, respectively, the products, has been demonstrated. A hypothesis on the influence of the second coordination sphere on the formation of one or the other polymorph of the DCS has been suggested. It has been shown that the series α-[Pd(NH₃)₄][МF₆]·H₂O (M = Pt, Pd) exhibits isostructurality.     

Reaction of <Emphasis Type="Italic">N</Emphasis>-aryl-3-oxobutanethioamides with 2-amino-1,3-thiazole and 2-amino-1,3-benzothiazole

N-Aryl-3-oxobutanethioamides react with 2-amino-1,3-thiazole (2-amino-1,3-benzothiazole) in acetic acid to give mixtures of 7-methyl-5H-[1,3]thiazolo[3,2-a]pyrimidine-5-thione (2-methyl-4H-pyrimido-[2,1-b][1,3]benzothiazole-4-thione) and 5-arylimino-7-methyl-5H-[1,3]thiazolo[3,2-a]pyrimidines (4-arylimino-2-methyl-4H-pyrimido[2,1-b][1,3]benzothiazoles), whose ratio depends on the nature of the aryl substituent in the initial butanethioamide.     

Biodegradable microspheres with poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) Enriched surface: Thermo-responsibility,biodegradation and drug release

Microspheres with thermo-responsible surface were fabricated by PCL-b-PEO-b-PNIPAM triblock copolymers. Thermo-responsible morphological changes of PCL-b-PEO-b-PNIPAM microspheres immersed in aqueous solution at temperatures above the LCST (e.g. 37 °C) were observed from porous surface structure to compact surface layer. Enzymatic degradation and in vitro drug release results showed that the thermo-responsible surface layer greatly influenced the degradation of microspheres as well as the drug release behavior from microspheres. With the copolymerization of PNIPAM block into PCL-b-PEO copolymers, the drug release could be well regulated by changing temperatures and microspheres composition, which revealed the great potentials of microspheres with thermo-responsible surface for controlled drug release.     

Two crystalline polymorphic forms of α-(<Emphasis Type="Italic">N</Emphasis>-benzoxazolin-2-one)acetic acid

Two crystalline polymorphic forms of α-(N-benzoxazolin-2-one)acetic acid (BAA) are prepared by changing the temperature of its crystallization from solution in ethanol. Crystallographic data of the α-form are determined: a = 12.7769(17) Å, b = 8.2574(9) Å, c = 16.7390(19) Å, β = 105.087(13)°, space group C2/c, V = 1705.2(4) ų, and Z = 8, while those of β form are a = 5.2854(4) Å, b = 5.9880(4) Å, c = 13.4509(5) Å, β = 94.666(4)°, space group P2₁, V = 424.30(4) ų, and Z = 2. It is found that BAA molecules of the α form combine into infinite one-dimensional chains arranged along axis b by means of O?H···O and C?H···O hydrogen bonds, and these chains are crosslinked via C?H···O hydrogen bonds to form a threedimensional structure. The β form has another system of hydrogen bonds, one of which is bifurcated (O4···O2, O4···O3), and the π–π-interactions between the benzoxazolinone fragments of BAA molecules combined into a chain also arranged along axis b are observed. Calorimetric analysis shows that the polymorphic transition from the α form to the β form occurs at 129°C.     

Synthesis of oxo derivatives of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">p</Emphasis>-tolysulfonyl)hexahydrocycloalka[<Emphasis Type="Italic">b</Emphasis>]indoles

Hydroxymercuration-demercuration of N-p-tolysulfonyl-4,4a,9,9a-tetrahydro-3H-carbazoles and N-p-tolyl(or methyl)sulfonyl-1,3a,4,8b-tetrahydrocyclopenta[b]indoles leads to the formation of the corresponding N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-2-ols and N-p-tolyl(or methyl)sulfonyl-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indol-2-ols. The latter are oxidized to 2-oxo derivatives with potassium dichromate. The oxidation of 2-methoxy-8-methyl-N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-ol under analogous conditions gives 2-methoxy-8-methyl-N-p-tolysulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-one.     

Synthesis and structure of (bis(3,5-dimethyl-1<Emphasis Type="Italic">H</Emphasis>-pyrazol-1-yl)methane)diiodocobalt(II)

A cobalt(II) iodide complex with bis(3,5-dimethyl-1H-pyrazol-1-yl)methane (L) CoLI₂ has been synthesized, and its single crystals have been obtained. The complex compound was characterized by electron spectroscopy and X-ray diffraction analysis. The compound crystallizes in the monoclinic system (a = 8.4044(4) Å, b = 13.3120(5) Å, c = 14.5824(7) Å; β = 94.7290(10)°; V = 1625.92(13) ų; Z = 4; ρ^calc = 2.112 g/cm³; space group P2₁/m). The structure of the complex is molecular mononuclear. L is a cyclic bidentate ligand; the coordination polyhedron of cobalt is a CoN₂I₂ tetrahedron formed by the nitrogen atoms of the pyrazole fragments L and iodine atoms. The complex has π-π stacking interactions between the pyrazole rings of CoLI₂ molecules, binding the molecules into infinite chains along the b axis.