功能聚碳酸酯的合成及表征

脂肪族聚碳酸酯作为生物材料已引起普遍关注,由于其良好的生物相容性、表面溶蚀性和无毒性,在医学领域中得到越来越广泛的应用.迄今已报道的许多脂肪族聚碳酸酯的降解速率相对较慢,如聚三亚甲基碳酸酯的降解速率比聚乳酸和聚己内酯慢很多.但是,如果在聚碳酸酯的侧链上引入亲水性功能基团,其降解速率将会明显提高.     

Synthesis and Properties of Biodegradable Copolymers of 9-Phenyl-2, 4, 8, 10-tetraoxaspiro-[5, 5]undcane-3-one and Ethylene Ethyl Phosphate

Novel biodegradable copolymer poly（CC-co-EEP） was synthesized by ring-opening copolymerization of cyclic carbonate 9-phenyl-2, 4, 8, 10-tetraoxaspiro-[5, 5]undcane-3-one （CC） and ethylene ethyl phosphate （EEP）. The obtained poly （CC-co-EEP）s were characterized by FTIR, ^1H NMR, ^13C NMR and gel permeation chromatography （GPC）. In vitro hydrolytic degradation of the copolymers were investigated in phosphate buffer solution （pH=7.4）. Hydrophilic phosphate units apparently improved the degradability of poly（carbonate-phosphate）.     

Synthesis and characterization of novel poly(ester carbonate)s based on pentaerythritol

Novel poly(ester carbonate)s were synthesized by the ring‐opening polymerization of L ‐lactide and functionalized carbonate monomer 9‐phenyl‐2,4,8,10‐tetraoxaspiro[5,5]undecan‐3‐one derived from pentaerythritol with diethyl zinc as an initiator. ¹H NMR analysis revealed that the carbonate content in the copolymer was almost equal to that in the feed. DSC results indicated that T_g of the copolymer increased with increasing carbonate content in the copolymer. Moreover, the protecting benzylidene groups in the copolymer poly(L ‐lactide‐co‐9‐phenyl‐2,4,8,10‐tetraoxaspiro[5,5]undecan‐3‐one) were removed by hydrogenation with palladium hydroxide on activated charcoal as a catalyst to give a functional copolymer, poly(L ‐lactide‐co‐2,2‐dihydroxylmethyl‐propylene carbonate), containing pendant primary hydroxyl groups. Complete deprotection was confirmed by ¹H NMR and FTIR spectroscopy. The in vitro degradation rate of the deprotected copolymers was faster than that of the protected copolymers in the presence of proteinase K. The cell morphology and viability on a copolymer film evaluated with ECV‐304 cells showed that poly(ester carbonate)s derived from pentaerythritol are good biocompatible materials suitable for biomedical applications. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45:1737 –1745, 2007     

α,β,γ,δ-四-{4-[3-(9-(4-(3-(9-(4-(2-(5,5-二酰氧基甲基-1,3-二噁烷基))))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5] 十一烷基]}苯基卟啉星形化合物的合成

以对苯二甲醛、丙二腈、季戊四醇和吡咯为原料, 合成了含有螺环结构单元的中间体3-[4-(2,2-二氰基)乙烯基]苯基-9-(4-甲酰基)苯基-2,4,8,10-四氧杂螺[5.5]十一烷(3)和α,β,γ,δ-四-(4-甲酰基苯基)卟啉(4). 4与过量的季戊四醇反应, 得到α,β,γ,δ-四-{4-[2-(5,5-二羟甲基-1,3-二噁烷基)]}苯基卟啉(5), 5与3的反应产物经10% NaOH 处理后, 再与过量的季戊四醇反应, 得到α,β,γ,δ-四-{4-[3-(9-(4-(3-(9-(4-(2-(5,5-二羟甲基-1,3-二噁烷基))))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基]}苯基卟啉(6), 6与乙酐、丙酐、苯甲酰氯反应, 得到α,β,γ,δ-四-{4-[3-(9-(4-(3- (9-(4-(2-(5,5-二乙酰氧基甲基-1,3-二噁烷基))))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基]}苯基卟啉(7), α,β,γ,δ-四-{4-[3-(9-(4-(3-(9-(4-(2-(5,5-二丙酰氧基甲基-1,3-二噁烷基))))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基]}苯基卟啉(8)和α,β,γ,δ-四-{4-[3-(9-(4-(3-(9-(4-(2-(5,5-二苯甲酰氧基甲基-1,3-二噁烷基))))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基]}苯基卟啉(9)等三种卟啉星形化合物. 中间体1～6和星形化合物7～9均进行了IR, ¹H NMR, MS和元素分析等结构表征. 对影响反应的诸因素进行了讨论.      

Protein encapsulation and release from degradable sugar based hydrogels

Acid labile sugar based hydrogels have been synthesized using a commercially available acid sensitive cross-linker, 3,9-divinyl-2,4,8,10-tetraoxaspiro-[5,5]-undecane. The monomers used for polymerization are N-isopropylacrylamide (NIPAM) and d-gluconamidoethyl methacrylate (GAMA), which when polymerized in the presence of the acid labile cross-linker yield hydrogels that can swell and degrade under acidic conditions, making them ideal for drug delivery. The hydrogels are synthesized using either a photo-initiator, Irgacure-2959 or a conventional initiator, potassium persulfate. The hydrogels obtained by photo-polymerization exhibit defined and unique microstructures, when analyzed by scanning electron microscopy (SEM). The swelling capacity and protein release from the hydrogels as a function of pH is studied. The protein release from the hydrogels is found to be dependent upon the degree of cross-linking and the pH of the environment.     

Detailed study of the ring-opening metathesis polymerization of norbornene bearing a five- or six-membered ring cyclic carbonate along with volume expansion

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (M_n's), 10% weight loss decomposition temperatures, glass-transition temperatures (T_g's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by M_n, T_g, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)₃-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006     

Cationic ring‐opening polymerization of monothiocarbonate with a norbornene group

This work deals with the cationic ring‐opening polymerization of cyclic thiocarbonates with a norbornene or norbornane moiety, that is, 5,5‐(bicyclo[2.2.1]hept‐2‐ene‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC1 ) or 5,5‐(bicyclo[2.2.1]heptane‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC2 ), respectively. The reaction of TC1 initiated by trifluoromethanesulfonic acid (TfOH), methyl trifluoromethanesulfonate (TfOMe), boron trifluoride etherate (BF₃OEt₂), or triethyloxonium tetrafluoroborate (Et₃OBF₄) afforded unidentified products; however, TC1 underwent cationic ring‐opening polymerization with methyl iodide as an initiator to afford polythiocarbonate because the propagating end was stabilized by the covalent‐bonding property. The polymerization of TC2 initiated by TfOH, TfOMe, BF₃OEt₂, or Et₃OBF₄ afforded polythiocarbonate with good solubility in common organic solvents and a narrow molecular weight distribution because of the absence of a double‐bond moiety. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1698–1705, 2002     

Cyanoacetylene and Its Derivatives: XXVIII. Reactions of 2-Mercaptobenzothiazole with Nitriles of αα,ββ-Acetylene γγ-Hydroxyacids and with 3-Phenyl-2-propynonitrile

Nucleophilic addition of 2-mercaptobenzothiazole to 4-alkyl-4-hydroxy-2-alkynonitriles at 1:1 ratio in the presence of 4-6 wt% of Et₃N occurs regio- and stereospecifically to afford (Z)-4-alkyl-3-(benzothiazolyl-2-thio)-4-hydroxy-2-alkenonitriles (yield 40-51%). In the presence of 1.3 wt% of Dabco the thiazole and 4-hydroxy-4-methyl-2-pentynonitrile (1:1) give rise to a mixture of 2-alkenonitrile and 2-(3,3,6,6-tetramethyl-2-cyanomethyl-5-cyanomethylene-1,4-oxathian-2-yl)thiobenzothiazole. At the use of 4-6 wt% of LiOH arises an intractable mixture containing 1,4-oxathiane, benzothiazol-2-one, 2-[1-(5,5-dimethyl-2-cyanomethyl)-4-cyanomethylene-1,3-oxathiolan-2-yl)-1-methylethyl]thiobenzothiazole, bis(2,2,5,5-tetramethyl-6-cyanomethyl-3-cyanomethylene-1,4-oxathian-6-yl) disulfide, bis[1-(5,5-dimethyl-2-cyanomethyl-4-cyanomethylene-1,3-oxathiolan-2-yl)-1-methylethyl] disulfide, and 3-[1-(5,5-dimethyl-2-cyanomethyl-4-cyanomethylene-1,3-oxathiolan-2-yl)-1-methylethyl]benzothiazol-2-one (according to ¹H and ¹³C NMR data). 2-mercaptobenzothiazole adds to 3-phenyl-2-propynonitrile in the presence of 7 wt% of KOH with regio- and stereospecific formation of (Z)-3-(benzothiazolyl-2-thio)-3-phenyl-2-propenonitrile (88%).     

Synthesis and characterization of novel aliphatic polycarbonates

A new six‐membered cyclic carbonate monomer, 5‐benzyloxy‐trimethylene carbonate, was synthesized from 2‐benzyloxy‐1,3‐propanediol, and the corresponding polycarbonate, poly(5‐benzyloxy‐trimethylene carbonate) (PBTMC), was further synthesized by ring‐opening polymerization in bulk at 150 °C using aluminum isobutoxide [Al(OⁱBu)₃], aluminum isopropoxide, or stannous octanoate as an initiator. The results showed that a higher molecular weight polycarbonate could be obtained in the case of Al(OⁱBu)_3. The protecting benzyl group was removed subsequently by catalytic hydrogenation to give a polycarbonate containing a pendant hydroxyl group (PHTMC). The polycarbonates obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR,¹³C NMR, gel permeation chromatography, and DSC. NMR results of PBTMC offered no evidence for decarboxylation occurring during the propagation. The pendant hydroxyl group in PHTMC resulted in an enhancement of the hydrophilicity of the polycarbonate. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 70–75, 2002     

Copper(II) complexes with singly condensed tridentate Schiff-base ligands incorporating 1-benzoylacetone

Two copper(II) complexes [CuL¹Cl]_n (1) and [CuL²Cl] (2) with singly condensed tridentate Schiff-base ligands [HL¹ = 6-amino-3-methyl-1-phenyl-4-azahex-3-en-1-one and HL² = 6-diethylamino-3-methyl-1-phenyl-4-azahex-3-en-1-one] have been synthesized and structurally characterized by X-ray crystallography. Complex 1 is a single-chloro-bridged one-dimensional polymer, whereas 2 is a monomeric square-planar complex. The H-bonding interactions of the amine hydrogen and the non-bonding interactions of phenyl groups in the Schiff base play important roles for the structural variations.     

Manganese‐Corrole Complexes as Versatile Catalysts for the Ring‐Opening Homo‐ and Co‐Polymerization of Epoxide

Manganese‐corrole complexes in combination with a co‐catalyst [PPN]X ([PPN]⁺=bis(triphenylphosphoranylidene)iminium) were found to be new versatile catalysts for the polymerization of epoxides, copolymerization of epoxides with CO₂, and copolymerization of epoxides with cyclic anhydrides affording a wide range of polymeric materials. This work should allow the synthesis of new types of improved innovative (co)polymers with original properties and would clearly increase the number of applications for polyesters, polycarbonates, and polyethers.     

Synthesis of 2,3,5,6-tetrahydro-4H-1,4-thiazin-3-one 1,1-dioxides from methyl (styrylsulfonyl)acetate

Methyl (styrylsulfonyl)acetate ( 1 ) was shown to be a useful building block for the synthesis of 5-phenyl-2,3,5,6–4H-tetrahydro-1,4-thiazin-3-one (2), its 4-amino 3 , and 4-hydroxy 4 derivatives. Their 2-spirocyclopropanes 9, 10 , and 11 , and 2,7-diphenyl-6,7-dihydro-8H-pyrimido[5,4-b][1,4]thiazinc 5,5-dioxide ( 18 ) were also prepared from 1 .     

Copper(II) azide complexes with mono-anionic tridentate Schiff-base ligands: monomer versus dimer

Three new copper(II) complexes [CuL¹N₃]₂ (1), [CuL²N₃] (2) and [CuL³N₃] (3) with three very similar tridentate Schiff base ligands [HL¹?=?6-diethylamino-3-methyl-1-phenyl-4-azahex-3-en-1-one, HL²?=?6-amino-3-methyl-1-phenyl-4-azahex-3-en-1-one and HL³?=?6-amino-3-methyl-1-phenyl-4-azasept-3-en-1-one] have been synthesized and structurally characterized by X-ray crystallography. In complex 1 half of the molecules are basal-apical, end-on azido bridged dimers and the remaining half are square-planar monomers whereas all the molecules in complexes 2 and 3 are monomers with square-planar geometry around Cu(II). A competition between the coordinate bond and H-bond seems to be responsible for the difference in structure of the complexes.     

Ring-opening polymerization of cyclic carbonates by alcohol–acid catalyst

Ring-opening reactions of 1,3-dioxepan-2-one ( 1 ) and 1,3-dioxan- 2 -one (2) with several alcohols were examined. The reactions proceeded without trifluoroacetic acid (TFA) in low conversions, while they proceeded smoothly with TFA to afford the ring-opened adducts and oligomers. Ring-opening polymerizations of 1 and 2 were also carried out by alcohol–acid catalysts to afford the corresponding polycarbonates (M _n = 2500−6800). The molecular weights increased with increase of the conversions of 1 and 2. The observed polymerization rates of 1 and 2 were determined as 24.4 × 10⁻⁶ and 0.8 × 10⁻⁶ s⁻¹, respectively. Mechanistic aspects were studied by NMR spectroscopy. The methylene protons α and β to the carbonate moieties shifted to lower fields in 0.06–0.11 ppm in the ¹H-NMR spectra by the addition of TFA. Downfield shifts of the carbonyl carbon signals of 1 and 2 were observed in 3.94–4.15 ppm in the ¹³C-NMR spectra. These results strongly suggest that the cyclic carbonates are activated by TFA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2463–2471, 1998     

Block copolymer materials from the organocatalytic ring‐opening polymerization of a pentaerythritol‐derived cyclic carbonate

9‐Phenyl‐2,4,8,10‐tetraoxaspiro[5,5]undecanone (PTO) was synthesized from pentaerythritol via the acid‐catalyzed acetal formation reaction with benzaldehyde and subsequent ring closure with ethyl chloroformate. The cyclic carbonate monomer was subsequently polymerized by ring‐opening polymerization (ROP) initiated from 1,4‐butanediol (1,4‐BDO) using the 1‐(3,5‐bis(trifluoromethyl)phenyl)‐3‐cyclohexylthiourea and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene dual organocatalytic system. It was found that the organocatalyst allowed for the synthesis of well‐defined polymers with minimal adverse side reactions and low dispersities. This system was then employed in the ROP of PTO initiated from an α,ω‐dihydroxy poly(caprolactone) (PCL) macroinitiator, with varying molecular weights, to yield a series of A‐B‐A block copolymers. These materials were characterized by ¹H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, thermogravimetric analysis and tensile analysis. It was found that the chain extension from PCL with poly(PTO) (PPTO) blocks yielded a thermoplastic material with superior tensile properties (elongation and Young's modulus) to that of the PCL homopolymer. Furthermore, it was noted that the addition of PPTO could be employed to alter the crystallization properties (crystallization temperature (T_c), and percentage crystallization) of the central PCL block. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2279–2286     

Amide-based atropisomers in tachykinin NK1-receptor antagonists: synthesis and antagonistic activity of axially chiral N-benzylcarboxamide derivatives of 2,3,4,5-tetrahydro-6H-pyrido[2,3-b][1,5]oxazocin-6-one

A series of novel N-benzylcarboxamide derivatives of bicyclic compounds, 3,4-dihydropyrido[3,2-f][1,4]oxazepin-5(2H)-one and 2,3,4,5-tetrahydro-6H-pyrido[2,3-b][1,5]oxazocin-6-one, were synthesized by cyclization of N-benzyl-2-chloro-N-(2-hydroxyethyl)- [and -(3-hydroxypropyl)-] nicotinamides, respectively. Atropisomerism was observed in 5-[3,5-bis(trifluoromethyl)benzyl]-7-phenyl-2,3,4,5-tetrahydro-6H-pyrido[2,3-b][1,5]oxazocin-6-ones due to steric hindrance of the carboxamide moiety and restriction of its rotation. Cyclization of N-[3,5-bis(trifluoromethyl)benzyl]-2-chloro-N-[(2S)-3-hydroxy-2-methylpropyl]-5-methyl-4-phenylnicotinamide gave (3S)-5-[3,5-bis(trifluoromethyl)benzyl]-3,8-dimethyl-7-phenyl-2,3,4,5-tetrahydro-6H-pyrido[2,3b][1,5]oxazocin-6-one, which exists predominantly in the thermodynamically stable aR-conformer in CDCl₃. This compound showed excellent NK₁-antagonistic activity with IC₅₀ value (in vitro inhibition of [¹²⁵I]-Bolton-Hunter-substance P binding in human IM-9 cells) of 0.47 nM, which is ca. 200-fold more potent than that of its enantiomer, indicating that the atropisomer chirality affects NK₁-receptor recognition.     

Investigation on lipase-catalyzed solution polymerization of cyclic carbonate

In this study, 26-membered macrocyclic carbonate, cyclobis(decamethylene carbonate) [(DMC)₂] was attempted to undergo ring-opening polymerization by lipase catalysis in toluene. Novozym-435 exhibited even higher catalytic activity towards (DMC)₂ polymerization compared with SnOCt₂ while high molecular weight (M_n) of 5.4 × 10⁴ and yield of 99% was still achieved at ultra-low enzyme/substrate (E/S) weight ratio of 1/200. ¹H NMR spectra demonstrated the existence of terminal hydroxyl group. Solid phase polymerization in the absence of toluene unexpectedly took place at the temperature lower than (DMC)₂’s melting point of 110 °C. Compared with solvent-free case, the addition of toluene solvent resulted in marked increase in reaction rate. As to the polymerization during 48 h with the E/S weight ratio of 1/100, a region existed at around toluene/carbonate (vol/wt, ml/g) ratio of 1∼2 where the polymerizations gave optimal results in terms of both higher molecular weight and monomer conversion. It was found that much higher molecular weight polymers may be obtained by decreasing enzyme concentrations. Plots of ln{[M]₀:[M]_t} versus reaction time were in linear agreement, indicating no chain termination, and monomer consumption follows a first-order rate law. The Novozym-435 catalyzed polymerization of (DMC)₂ in toluene presented pseudo-living characteristic. Compared with 6-membered trimethylene carbonate, much lower reaction activity of large-sized (DMC)₂ is observed, which is opposite to the result concerning the enzymatic polymerization of lactones with different ring-size.     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .     

Studies on the synthesis of heterocyclic compounds. Part IV. Further investigation of the pschorr reaction with some pyrazole derivatives

Thermal decomposition of the diazonium sulfate derived from N-methyl-(1-phenyl-3-methylpyrazol-5-yl)-2-aminobenzamide afforded products formulated as 1-phenyl-3-methyl[2]benzopyrano[4,3-c]pyrazol-5-one (yield 10%), 1,4-dimethyl-3-phenylpyrazolo[3,4-c]isoquinolin-5-one (yield 10%), N-methyl-(1-phenyl-3-methylpyrazol-5-yl)-2-hydroxybenzamide (yield 8%) and 4′-hydroxy-2,3′-dimethyl-1′-phenylspiro[isoindoline-1,5′-[2]-pyrazolin]-3-one (yield 20%). Decomposition of the diazonium sulfate derived from N-methyl-(1,3-diphenylpyrazol-5-yl)-2-aminobenzamide gave products formulated as 7,9-dimethyldibenzo[e,g]pyrazolo[1,5-a][1,3]-diazocin-10-(9H)one (yield 8%), 4-methyl-1,3-diphenylpyrazolo[3,4-c]isoquinolin-5-one (yield 7%) and 4′-hydroxy-2-methyl-1′,3′-diphenylspiro[isoindoline-1,5′-[2]pyrazolin]3-one (yield 10%). The spiro compounds 6a,b underwent thermal and acid-catalysed conversion into the hitherto unknown 2-benzopyrano[4,3-c]pyrazole ring system 7a,b in good yield. Analytical and spectral data are presented which supported the structures proposed.     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.