Dielectric classification of <Emphasis Type="Italic">D</Emphasis>-and <Emphasis Type="Italic">L</Emphasis>-amino acids by thermal and analytical methods

Dielectric analysis (DEA), supported by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), powder X-ray diffraction analysis (PXRD) and photomicrography, reveal the chiral difference in the amino acids. The acids are classified as dielectric materials based on their structure, relating chirality to the vector sum of the average dipole moment, composed of the constant optical (electronic) and infra-red (atomic) polarizabilities, as well as dipole orientation. This study encompasses 14 L-and D-amino acid isomers. Physical properties recorded include AC electrical conductivity, charge transfer complexes, melting, recrystallization, amorphous and crystalline phases, and relaxation spectra, activation energies and polarization times for the electrical charging process.     

Molecular structure of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">o</Emphasis>-and <Emphasis Type="Italic">p</Emphasis>-hydroxybenzyl)cytisine

The molecular structures of N-(o-and p-hydroxybenzyl)cytisine were investigated by NMR spectroscopy, x-ray structure analysis, and molecular modeling. It was found that NMR resonances of the OH and aromatic protons in N-(o-hydroxybenzyl)cytisine were doubled because of the presence of two conformers in solution. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 165–168, March–April, 2008.     

Synthesis of Novel <Emphasis Type="Italic">D</Emphasis>-<Emphasis Type="Italic">Seco</Emphasis>-Pregnenes

Summary. A new synthetic route was developed for the preparation of trans-3-hydroxy-16,17-seco-pregna-5,17(20)-dien-16-al, using Grob fragmentation as the key step. This seco-steroid contains a formyl group and an unsaturated side-chain in a sterically favourable position, and is therefore a promising starting material for the synthesis of novel condensed steroid heterocycles.Received March 22, 2003; accepted April 22, 2003 Published online September 25, 2003     

Temperature- and pressure-responsive properties of <Emphasis Type="SmallCaps">l</Emphasis>- and<Emphasis Type="SmallCaps"> dl</Emphasis>-forms of poly(<Emphasis Type="Italic">N</Emphasis>-(1-hydroxymethyl)propylmethacrylamide) in aqueous solutions

The structural transition of the l- and dl forms of poly(N-(1- hydroxymethyl)propylmethacrylamide (PHMPMA) in aqueous solution was studied by measuring the pressure dependence of the apparent scattering intensity, differential scanning calorimetry (DSC), and circular dichroism (CD). The thermodynamic implications of the results are discussed in relation to the chiral structure of the side chain, and differences in the thermal and barometric transitions. T-P diagrams of the transition showed characteristic ellipsoid features. Antagonism of the temperature and pressure effects was observed only for P(dl-HMPMA). For P(l-HMPMA), the transition temperature (T _tr) decreased with increasing pressure, and the highest T _tr was observed at atmospheric pressure (0.1 MPa). For both polymers, the highest P _trs were observed at the lowest temperatures. The l polymer showed a specific negative peak in its CD spectrum at around 220 nm in the lower temperature region and the temperature dependence was reproduced by a single-step transition, with the midpoint corresponding to the T _tr obtained from the scattering measurements. Coupled with the results from the DSC, the different behavior between the P(l-HMPMA) and P(dl-HMPMA) could be explained in terms of the chain states before and after the transition. The cooperative factors derived from the DSC measurement revealed that about 4 to 5 polymers of the present size were necessary to perform a thermal transition for P(l-HMPMA), and that P(dl-HMPMA) underwent its transition as an almost single molecular event.This revised version was published online in June 2005 with correction to the article category.     

Synthesis and properties of a new fused heterocyclic system 12<Emphasis Type="Italic">H</Emphasis>-benzo[5,6][1,2,4]triazepino[3,4-<Emphasis Type="Italic">a</Emphasis>]isoindol-5(6<Emphasis Type="Italic">H</Emphasis>)-one

12H-Benzo[5,6][1,2,4]triazepino[3,4-a]isoindol-5(6H)-one was synthesized by the condensation of anthranilic acid hydrazide with o-phthalaldehyde. The structure of this compound was established by the X-ray diffraction study of its isopropyl derivative. The mechanism of formation of this compound was suggested and its alkylation reactions were investigated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 180–185, January, 2008.     

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Kinetic investigation of the polymerization of <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-lactide and glycolide via differential scanning calorimetry

The kinetics of polymerization of D,L-lactide and glycolide are studied via differential scanning calorimetry at different temperatures and concentrations of the catalyst tin octanoate. For the polymerization of D,L-lactide and glycolide, the enthalpies are determined to be ?17 ± 1.5 and 16.5 ± 1.5 kJ/mol, respectively. The time to attain reaction equilibration decreases from 300 to 100 min with an increase in temperature from 200 to 220°C. The time of reaction at 200°C decreases from 280 to 100 min as the concentration of the catalyst is increased from 500 to 830 ppm. When the polymerization of glycolide is conducted at temperatures below 200°C, the reaction is accompanied by crystallization of polyglycolide and an increase in the total enthalpy of the process.     

Ultrasound-assisted synthesis of block copolymers of chitosan and <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-lactide: Structure and properties

The block copolymers of chitosan with D,L-lactide are synthesized under UV irradiation of the homogeneous solution of the corresponding homopolymers with the yield of the main product being 96 wt %. The polyblock structure of copolymer chains, in which the size of polylactide blocks is varied in the range of (2.9–22.0) × 10³ depending on the synthesis conditions, is demonstrated. The incorporation of polylactide blocks into the structure of chitosan leads to development of the material structure close to the structure of polylactide. The films of the block copolymers containing 16 wt % polylactide and having a molecular mass of its blocks of 22.0 × 10³ have increased values of breaking stress (47 MPa) and ultimate strain (20%) compared to chitosan (24 MPa and 1.9%, respectively). The obtained block copolymers possess bactericidal properties.     

Synthesis of (<Emphasis Type="Italic">E</Emphasis>)- and (<Emphasis Type="Italic">Z</Emphasis>)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles

Abstract  An efficient synthesis method for the preparation of a series of new (Z)- and (E)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles was developed. The reaction of (Z)- and (E)-3-styrylchromones with hydrazine hydrate afforded the corresponding (Z)- and (E)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles, except for nitro derivatives, where both (Z)- and (E)-4′-nitro-3-styrylchromones afforded (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles. The reaction mechanism for these transformations is discussed and the stereochemistries of all products were established by NMR experiments. Graphical abstract        

<Emphasis Type="Italic">S</Emphasis>-functional derivatives of 3,4-dihydro-2<Emphasis Type="Italic">H</Emphasis>-1,4-thiasilines

The first cyclic unsaturated S-functional derivatives of 4,4-diphenyl-3,4-dihydro-2H-1,4-thiasiline, S-oxide, S,S-dioxide, and S-sulfonimide, were prepared. Oxidation of the hydrolytically less stable 4,4-dimethyl-3,4-dihydro-2H-1,4-thiasiline leads to the corresponding sulfoxide and sulfone along with the ring opening products, siloxanes containing the sulfoxide or sulfonyl group.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

Poly[3-(3,4-dihydroxyphenyl)glyceric acid] from <Emphasis Type="Italic">Symphytum officinale</Emphasis> roots and its biological activity

Two high-molecular-weight (>1000 kDa) water-soluble biopolymers, the main component of which was poly[3-(3,4-dihydroxyphenyl)glyceric acid] or poly[oxy-1-carboxy-2-(3,4-dihydroxyphenyl)ethylene] according to IR and NMR spectroscopy, were isolated from roots of Symphytum officinale. They exhibit antioxidant activity as expressed in a decrease of active oxygen species (AOS) by interfering directly in their formation process by polymorphonuclear neutrophils (PMN) and binding directly AOS. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 9–12, January–February, 2009.     

Synthesis of (<Emphasis Type="Italic">E</Emphasis>)-<Emphasis Type="Italic">N</Emphasis>-(3-alkoxy-4-acyloxyphenylmethylene)-<Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">e</Emphasis>-cyclohexyl)amines

Previously unknown E isomers of azomethines (Schiff bases) were synthesized from vanillal and vanillin esters by their reaction with cyclohexylamine.     

Synthesis of ethyl (2<Emphasis Type="Italic">E</Emphasis>,4<Emphasis Type="Italic">E</Emphasis>)- and (2<Emphasis Type="Italic">E</Emphasis>,4<Emphasis Type="Italic">Z</Emphasis>)-5-chloropenta-2,4-dienoates

An efficient synthetic approach to 2E,4E and 2E,4Z isomers of ethyl 5-chloropenta-2,4-dienoate has been developed on the basis of one-pot oxidation–olefination of readily accessible (E)- and (Z)-3-chloroprop-2-en-1-ols by the action of barium manganate and ethyl (triphenyl-λ⁵-phosphanylidene)acetate.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-trimethylsilyl-substituded anililes

N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and ¹H, ¹³C, and ²⁹Si NMR spectroscopy.     

Synthesis of <Emphasis Type="Italic">o</Emphasis>(<Emphasis Type="Italic">m</Emphasis>)-carborane-containing azomethines

A method of preparative synthesis of o(m)-carborane-containing azomethines via the condensation of o(m)-carboranyl-C-methylene-4-formylbenzoates with aliphatic, cycloaliphatic, and aromatic amines was developed.     

Antioxidant flavonoids from <Emphasis Type="Italic">Tamus communis</Emphasis> ssp. <Emphasis Type="Italic">cretica</Emphasis>

A new flavonoid, kaempferol-3,4′-di-O-α-L-rhamnopyranoside (1), and three known flavonoids (2–4) were isolated from the aerial parts of T. communis L. The structure of the new compound was elucidated on the basis of spectroscopic data. Compounds 1 and 2 showed significant antioxidant activity (IC₅₀ 187.151 ± 0.821 μM, and 92.079±0.513 μM, respectively), whereas compounds 3 and 4 showed moderate activity in DPPH free radical scavenging assays. Published in Khimiya Prirodnykh Soedinenii, No. 3, pp. 295–297, May–June, 2009.     

Relationship between electrical resistivity and particle dispersion state for carbon black filled poly (ethylene-<Emphasis Type="Italic">co</Emphasis>-vinyl acetate)/poly (<Emphasis Type="SmallCaps">L</Emphasis>-lactic acid) blend

It is known that the electrical volume resistivity of insulating polymers filled with conductive fillers suddenly decreases at a certain content of filler. This phenomenon is called percolation. Therefore, it is known that controlling resistivity in the semi-conductive region for carbon black (CB) filled composites is very difficult. When poly (ethylene-co-vinyl acetate) (EVA) is used as a matrix, the percolation curve becomes gradual because CB particles disperse well in EVA. In this study, the relationship between the dispersion state of CB particles and electrical resistivity for EVA/poly (L-lactic acid) (PLLA) filled with CB composite was investigated. The apparent phase separation was seen in the SEM photograph. It was predicted that the CB particles located into the EVA phase in the light of thermodynamical consideration, which was estimated from the wetting coefficient between polymer matrix and CB particles. The total surface area per unit mass of dispersed CB particles in the polymer blend matrix was estimated from small-angle X-ray scattering and the volume resistivity decreased with increasing CB content. The values of the surface area of CB particles in CB filled EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) polymer blends showed a value similar to that of the CB filled EVA single polymer matrix. In electrical volume resistivity measurement, moreover, the slopes of percolation curves of EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) filled with CB composite are similar to that of EVA single polymer filled with CB composite. As a result, it was found that CB particles selectively locate in the EVA phase, and then the particle forms conductive networks similar to the networks in the case of EVA single polymer used as a matrix.     

Determination of <Emphasis Type="SmallCaps">D</Emphasis>- and <Emphasis Type="SmallCaps">L</Emphasis>-amino acids produced by cyanobacteria using gas chromatography on Chirasil-Val after derivatization with pentafluoropropyl chloroformate

A rapid and simple method was developed for the determination of free amino acids (AAs) released from cyanobacteria. The procedure involves trapping of AAs from the centrifuged cyanobacterial culture fluid on a cation-exchange resin, their release together with the resin by direct treatment with the reaction medium, followed by immediate derivatization with a corresponding chloroformate. The extractive alkylation transfers the analytes into an organic phase, an aliquot of which is subjected to GC analysis. Identification and quantification of AAs was performed by GC/MS and GC/FID, respectively, using propyl chloroformate (PCF) as the derivatization reagent. For chiral analysis, the cyanobacteria extracts were treated with 2,2,3,3,3-pentafluoropropyl chloroformate (PFPCF) to create more volatile analytes. Separation of the AA enantiomers was accomplished on a Chirasil-Val capillary column and the D/L enantiomeric ratios were determined. AAs of cyanobacteria are considered to be important for the assessment of energy flow in an aquatic food web, nutrition value of cyanobacteria in a food web and for cell–cell communication within cyanobacteria. The highest levels of AAs were found in the summer period at the beginning of the season (July). In the September and October samples, the amount of AAs was lower, the number of D-AAs decreased and the D/L ratio was higher than in the July sample. Based on the obtained results it can be assumed that young populations excrete AAs in higher concentrations and a different composition compared to actively growing populations. Figure PFPCF derivatization scheme