Toughening Mechanism of Nanocomposite Physical Hydrogels Fabricated by a Single Gel Network with Dual Crosslinking——The Roles of the Dual Crosslinking Points

A facile method to fabricate tough and highly stretchable polyacrylamide (PAM) nanocomposite physical hydrogel (NCP gel) was proposed. The hydrogels are dually crosslinked single network with the PAM grafted vinyl hybrid silica nanoparticles (VSNPs) as the analogous covalent crosslinking points and the reversible hydrogen bonds among the PAM chains as the physical crosslinking points. In order to further elucidate the toughening mechanism of the PAM NCP gel, especially to understand the role of the dual crosslinking points, the PAM hybrid hydrogels (H gels) and a series of poly(acrylamide-co-dimethylacrylamide) (P(AM-co-DMAA)) NCP gels were designed and fabricated. Their mechanical properties were compared with those of the PAM NCP gels. The PAM H gels are prepared by simply mixing the PAM chains with bare silica nanoparticles (SNPs). Relative to the poor mechanical properties of the PAM H gel, the PAM NCP gel is remarkably tough and stretchable and also generates large number of micro-cracks to stop notch propagation, indicating the important role of PAM grafted VSNPs in toughening the NCP gel. In the P(AM-co-DMAA) NCP gels, the P(AM-co-DMAA) chains are grafted on VSNPs and the polydimethylacrylamide (PDMAA) only forms very weak hydrogen bonds between themselves. It is found that mechanical properties of the PAM NCP gel, such as the tensile strength and the elongation at break, are enhanced significantly, but those of the P(AM-co-DMAA) NCP gels decreased rapidly with decreasing AM content. This result reveals the role of the hydrogen bonds among the grafted polymer chains as the physical crosslinking points in toughening the NCP gel.     

Phase Transition Temperature Controllable Poly(acrylamide-co-acrylic acid) Nanocomposite Physical Hydrogels with High Strength

Poly(acrylamide-co-acrylic acid) nanocomposite physical(P(AAm-co-AAc)NCP) hydrogels have been prepared through the in situ free radical solution polymerization based on a "single network, dual cross-linkings" strategy. The P(AAm-co-AAc) NCP hydrogels are composed of nanobrushes of P(AAm-co-AAc) chains grafted on the surface of vinylhybrid silica nanoparticles(VSNPs). In the hydrogel system, the VSNPs act as the "analogous chemical cross-linking points"once the hydrogen bonds formed between the P(AAm-co-AAc) chains of the nanobrushes, thus leading to the fabrication of high-strength P(AAm-co-AAc) NCP hydrogels. Compared with conventional thermosensitive P(AAm-co-AAc) hydrogels,the P(AAm-co-AAc) NCP hydrogels have a broader range of phase transition temperature, which can be adjusted by altering the monomer ratio, the VSNPs concentration, the addition of urea and N,N-dimethylacrylamide(DMAAm). At the same time, the mechanical properties of the P(AAm-co-AAc) NCP hydrogels have been improved significantly by the introduction of VSNPs. Furthermore, both the phase transition and the tensile strength of the P(AAm-co-AAc) NCP hydrogels are largely influenced when Fe3+ ions are introduced as the ionic crosslinkers into the hydrogel networks.     

Photocatalytic efficiency of TiO2/poly[acrylamide-co-(acrylic acid)] composite for textile dye degradation

A novel photocatalytically degradable TiO₂/poly[acrylamide-co-(acrylic acid)] composite hydrogel (TiO₂/poly[AAm-co-AAc]) was synthesized by polymerization in an aqueous solution with N,N’-methylenebisacrylamide as the crosslinker and ammonium persulphate and TEMED as the initiator pair. The combined and separate effects of photodegradation and adsorption processes for dye removal were evaluated using methylene blue (MB) as the model dye for a photodegradation target, and compared with those of the neat poly[AAm-co-AAc], and a commercially available TiO₂ photocatalyst (Degussa P-25). Without photodegradation (i.e. in the dark), the TiO₂/poly[AAm-co-AAc] composite adsorbed up to 85% of the MB from a 5 mg L⁻¹ MB solution in 15 min compared to only 10% for the pristine TiO₂. The reproducibility in photodegradation of the reused poly[AAm-co-AAc] composite was also investigated, where poly[AAm-co-AAc] was found to be photocatalytically degraded under UV irradiation. Therefore, the TiO₂/poly[AAm-co-AAc] composite hydrogel is a good dye adsorber with self-photodegradability and it also can easily be separated from the reaction by simple filtration. With these properties, the TiO₂/poly[AAm-co-AAc] hydrogel can be called a green polymer for use in the photodegradation-adsorption process for the abatement of various pollutants.     

Micellization and gelation of the double thermoresponsive ABC-type triblock copolymer synthesized by RAFT

A double thermoresponsive ABC-type triblock copolymer(poly(ethyleneglycol)-block-poly(2-(2-methoxyethoxy) ethyl methacrylate)-block-poly(2-(2-methoxy ethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate, PEG-b-PMEO_2MA-b-P(MEO_2MA-co-OEGMA)) was designed and synthesized by reversible additionfragmentation chain transfer polymerization(RAFT). The ABC-type triblock copolymer endowed a thermal-induced twostep phase transition at 29 and 39 °C, corresponding to the thermosensitive properties of PMEO_2 MA and P(MEO_2MA-coOEGMA) segments, respectively. The two-step self-assembly of copolymer solutions was studied by UV transmittance measurement, dynamic light scattering(DLS), transmission electron microscopy(TEM) and so on. The triblock copolymers showed the distinct thermosensitive behavior with respect to transition temperatures, aggregate type and size, which was correlated to the degree of polymerization of thermosensitive blocks and the molar fraction of OEGMA in the P(MEO_2MAco-OEGMA) segments. In addition, micelles could further aggregate to form the hydrogel by the self-associate of PEG chains under the abduction of the concentration and temperature. The transition from sol to gel was investigated by a test tube inverting method and dynamic rheological measurement.     

Rheological behavior and reversible swelling of pH sensitive poly(acrylamide-<Emphasis Type="Italic">co</Emphasis>-itaconic acid) hydrogels

The study involved preparation of poly(acrylamide-co-itaconic acid) hydrogels by radical cross-linking copolymerization. The copolymer hydrogels were characterized through infrared spectroscopy, thermal analysis, swelling measurements and in oscillatory and steady shear rheology. Results showed that more stable copolymers were formed due to the strong interaction in the hydrogels. These hydrogels have shown substantial percent swelling in water and shrinking in saline solution and acidic buffers. The rheological properties were described by the Herschel-Bulkley and power-law models to explore their non-Newtonian behavior. The results showed that higher itaconic acid content raised the polymer viscosity; the degree of shear-thinning and polymer elasticity (G′) were also increased. The transition from the viscous (G′ < G″) to the predominant viscoelastic behavior (G′ > G″) occurs at a crossover frequency ranged from 17.8 rad/s for polyacrylamide to 15.7, 12.8 and 12.5 rad/s for copolymers.     

Biodegradable poly(butylene succinate-<Emphasis Type="Italic">co</Emphasis>-butylene dimerized fatty acid)s: Synthesis,crystallization, mechanical properties,and rheology

Poly(butylene succinate-co-butylene dimerized fatty acid) (P(BS-co-BDFA)) copolyesters were synthesized from succinic acid (SA) and dimerized fatty acid (DFA) with 1,4-butanediol (BDO) through a two-step process of esterification and polycondensation. The polyester compositions and physical properties of copolyesters were investigated by GPC, ¹H NMR and ¹³C NMR, DSC, WAXD, DMA, TGA, tensile and rheology test. The melting temperature (T_m), and crystallization temperature (T_c) decreased gradually as the content of DFA monomer increased. P(BS-co-BDFA) copolyesters showed the same crystal structure as the PBS homopolyester. Besides, TGA results indicated that P(BS-co-BDFA)s were of higher thermal stabilities. Moreover, it was found that the synthesized P(BS-co-BDFA)s showed the maximum elongation at break (591%) as the DFA contents were 10 mol%. Rheology analysis indicated that the viscoelastic behavior of the polyesters greatly depended on the molecular weight of polyesters.     

Investigation of cationic soapless P(St-<Emphasis Type="Italic">co</Emphasis>-DMAEMA) latex and its electrostatic adsorption of laponite

Cationic poly(styrene-co-N,N-dimethylaminoethyl methacrylate) (P(St-co-DMAEMA)) latexes were prepared in the absence of surfactant by using 2,2’ -azobis (2-methylpropionamidine) dihydrochloride (AIBA) as the initiator. The effects of the AIBA concentration, HCl/DMAEMA molar ratio and DMAEMA amount on the emulsion polymerization and the latex properties were investigated. The particle morphology and size, the zeta potential and the amino distribution of the P(St-co-DMAEMA) latexes were characterized by transmission electron microscope (TEM), dynamic light scattering (DLS) and conductometric titration, respectively. Results showed that the emulsion polymerization performed smoothly with high monomer conversion and narrow particle size distribution under the optimized conditions with AIBA concentration of 1 wt%, HCl/DMAEMA molar ratio of 1.2 and DMAEMA content of 5 wt%. The diameter of the dried latex particles decreased and the density of amino groups on the particle surfaces increased with increasing the DMAEMA content. The zeta potential of the P(St-co-DMAEMA) latexes was pH-dependent and the zero point was around at pH 7.2. A facile method was developed to fabricate P(St-co-DMAEMA)/laponite hybrid nanoparticles via electrostatic adsorption, in which the loading capacity of laponite platelets reached 17.7 wt%, and the resultant hybrid nanoparticles showed good thermal stability.     

Simultaneously improving the tensile and impact properties of isotactic polypropylene with the cooperation of <Emphasis Type="Italic">co</Emphasis>-PP and <Emphasis Type="Italic">β</Emphasis>-nucleating agent through pressure vibration injection molding

In this article, crystalline morphology and molecular orientation of isotactic polypropylene (iPP), random copolymerized polypropylene (co-PP) and β-nucleating agent (β-NA) composites prepared by pressure vibration injection molding (PVIM) have been investigated via polarized light microscopy, scanning electron microscopy, wide-angle X-ray diffraction and differential scanning calorimetry. Results demonstrated that the interaction between co-PP and iPP molecular chains was beneficial for the mechanical improvement and the introduction of β-NA further improved the toughness of iPP. In addition, after applying the pressure vibration injection molding (PVIM) technology, the shear layer thickness increased remarkably and the tensile strength improved consequently. Thus, the strength and toughness of iPP/co-PP/β-NA composites prepared by PVIM were simultaneously improved compared to those of the pure iPP prepared by conventional injection molding (CIM): the impact toughness was increased by five times and tensile strength was increased by 9 MPa. This work provided a new method to further enhance the properties of iPP/co-PP composites through dynamic processing strategy.     

Alkylation of 2-(methylsulfanyl)-6-polyfluoroalkylpyrimidin-4(3<Emphasis Type="Italic">H</Emphasis>)-ones with haloalkanes

The alkylation of ambident anions of 2-(methylsulfanyl)-6-(polyfluoroalkyl)pyrimidin-4(3H)-ones with 4-bromobutyl acetate leads to concurrent formation of O- and N-(4-acetoxybutyl) derivatives. Polar aprotic solvents favor formation of the O-isomer, and weakly polar dioxane favors N-alkylation. The reaction of 2-(methylsulfanyl)-6-(trifluoromethyl)pyrimidin-4(3H)-one with an equimolar amount of 1,2-dibromoethane in polar acetonitrile gives a mixture of N,N-, O,O-, and N,O-bridged bis-pyrimidines, as well as N- and O-[2-(methylsulfanyl)ethyl] derivatives, whereas in the presence of 10 equiv of 1,2-dibromoethane the N,O-isomer is formed as the only product. The reaction in weakly polar tetrahydrofuran yields N,N- and N,O-bispyrimidines.     

Structure and characteristics of organic-inorganic hybrid hydrogels based on poly(<Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam)-SiO<Subscript>2</Subscript>

In the reaction system of poly(N-vinylcaprolactam)-water-tetramethoxysilane, the effect of concentrations and ratios between compounds on the structure and characteristics of the formed organicinorganic hybrid hydrogels based on poly(N-vinylcaprolactam) and silica particles is studied. When the over-all concentration of precursors is increased, the number of bonds between hydrogel components increases, and an increase in the number of network crosslinks is provided by an increased fraction of tetramethoxysilane. The method of small-angle X-ray analysis is used to estimate quantitative structural characteristics of silica particles in hydrogels. Silica particles are found to form a fractal three-dimensional structure, which is composed of individual compact clusters with lateral dimensions of 40–60 Å. The average linear dimensions of scattering anisometric particles are 100 × 120 × 360 three-dimensional structure is proposed for hydrogel formed via the interaction of poly(N-vinylcaprolactam) macromolecules and silica nano-particles. The average distance between silica particles is estimated.     

3-(1-Methyl-1-nitroethyl-1-<Emphasis Type="Italic">ONN</Emphasis>-azoxy)-4-aminofuroxan. Synthesis and transformations of the amino group

A four-step procedure to convert 4-(1-methyl-1-nitroethyl-1-ONN-azoxy)-3-cyanofuroxan into 3-(1-methyl-1-nitroethyl-1-ONN-azoxy)-4-aminofuroxan was developed. The pathways of transformation of the amino group of the synthesized compound into N-nitramino-, N-alkyl-N-nitramino-, N,N’-methylenediamino-, N,N’-methylene-N,N’-dinitramino-, and azo groups were studied.     

Enzyme responsive supramolecular hydrogels assembled from nonionic peptide amphiphiles

Smart peptide hydrogels are of great interest for their great potential applications. Here, we report a facile approach to prepare a class of enzyme-responsive hydrogels in a scalable manner. These hydrogels self-assemble from a family of nonionic peptide amphiphiles(PAs) synthesized by sequential ring-opening polymerization(ROP) of γ-benzyl-L-glutamate N-carboxyanhydride(BLG-NCA) and L-tyrosine N-carboxyanhydride(Tyr-NCA), followed by subsequent aminolysis. These PA samples can readily form a clear hydrogel with a critical gelation concentration as low as 0.5 wt%. The incorporation of tyrosine residues offers hydrophobicity, hydrogen-bonding interaction and enzyme-responsive properties. The hydrogel-to-nanogel transition is observed under physiological conditions in the presence of horseradish peroxidase(HRP) and hydrogen peroxide(H2 O2). The obtained PA hydrogels are ideal candidates for the new generation of smart scaffolds.     

Correlation of Morphology Evolution with Superior Mechanical Properties in PA6/PS/PP/SEBS Blends Compatibilized by Multi-phase Compatibilizers

In this study,the maleic anhydride(MAH)and styrene(St)dual monomers grafted polypropylene(PP)and poly[styrene-b-(ethylene-co-butylene)-b-styrene](SEBS),i.e.PP-g-(MAH-co-St)and SEBS-g-(MAH-co-St)are prepared as multi-phase compatibilizers and used to compatibilize the PA6/PS/PP/SEBS(70/10/10/10)model quaternary blends.Both PS and SEBS are encapsulated by the hard shell of PP-g-(MAH-co-St)in the dispersed domains(about 2μm)of the PA6/PS/PP-g-(MAH-co-St)/SEBS(70/10/10/10)quaternary blend.In contrast,inside the dispersed domains(about 1μm)of the PA6/PS/PP/SEBS-g-(MAH-co-St)(70/10/10/10)quaternary blend,the soft SEBS-g-(MAH-co-St)encapsulates both the hard PS and PP phases and separates them.With increasing the content of the compatibilizers equally,the morphology of the PA6/PS/(PP+PP-g-(MAH-co-St))/(SEBS+SEBS-g-(MAH-co-St))(70/10/10/10)quaternary blends evolves from the soft(SEBS+SEBS-g-(MAH-co-St))encapsulating PS and partially encapsulating PP(about 1μm),then to PS exclusively encapsulated by the soft SEBS-g-(MAH-co-St)and then separated by PP-g-(MAH-co-St)inside the smaller domains(about 0.6μm).This morphology evolution has been well predicted by spreading coefficients and explained by the reaction between the matrix PA6 and the compatibilizers.The quaternary blends compatibilized by more compatibilizers exhibit stronger hierarchical interfacial adhesions and smaller dispersed domain,which results in the further improved mechanical properties.Compared to the uncompatibilized blend,the blend with both 10 wt%PP-g-(MAH-co-St)and 10 wt%SEBS-g-(MAH-co-St)has the best mechanical properties with the stress at break,strain at break and impact failure energy improved significantly by 97%,71%and 261%,respectively.There is a strong correlation between the structure and property in the blends.     

Reactions of arylsulfinyl chlorides and <Emphasis Type="Italic">N</Emphasis>-(arylsulfonyl)arylsulfinimidoyl chlorides with <Emphasis Type="Italic">p</Emphasis>-aminophenols

In reactions of arylsulfinyl chlorides and N-(arylsulfonyl)arylsulfinimidoyl chlorides with p-aminophenols formed N-arylthio-1,4-benzoquinone imines, evidently through a stage of N-arylsulfinyl-4-aminophenols and N-(N-arylsulfonyl)arylsulfinylimidoyl-4-aminophenols that under the reaction conditions eliminate respectively H₂O and ArSO₂NH₂.     

Regioselectivity in the reactions of <Emphasis Type="Italic">N</Emphasis>-(polychloroethylidene)-sulfonamides with 1<Emphasis Type="Italic">H</Emphasis>-pyrrole and 1-methyl-1<Emphasis Type="Italic">H</Emphasis>-pyrrole

N-(2,2,2-Trichloroethylidene)arenesulfonamides react with 1H-pyrrole and 1-methyl-1H-pyrrole to give the corresponding N-[2,2,2-trichloro-1-(1H-pyrrol-2-yl)ethyl]arenesulfonamides. The reaction of N-(2,2,2-trichloroethylidene)trifluoromethanesulfonamide with pyrrole leads to a mixture of 2-mono-and 2,5-disubstituted pyrroles, whereas in the reaction with 1-methyl-1H-pyrrole only the 2-substituted compound is formed. N-(2,2-Dichloro-2-phenylethylidene)-4-methylbenzenesulfonamide reacts with 1H-pyrrole to form N-[2,2-dichloro-2-phenyl-1-(1H-pyrrol-2-yl)ethyl]-4-methylbenzenesulfonamide, and its reaction with 1-methyl-1H-pyrrole gives a mixture of 2-and 3-monosubstituted derivatives. The results of quantum-chemical calculations of the initial reactants and products indicate that the process is orbital-controlled. A good agreement is observed between the experimental data and theoretical conclusions concerning the dependence of the reaction regioselectivity on the nature of substituents in the electrophile molecule.     

Thermoresponsive behavior of water-salt solutions of a graft copolymer with a main polyimide chain and side poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

The water-salt solutions of the graft copolymer bearing a polyimide main chain and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains (M = 4.7 × 10⁵, the density of grafting with side chains z = 0.44) are studied by static and dynamic light scattering and turbidimetry. The solutions are investigated in a tenfold range of NaCl concentrations (from 0.015 to 0.15 mol/L) at the polymer concentration from 0.002 to 0.015 g/cm³ and pH from 8 to 12. The temperature dependences of the intensity of scattered light, optical transmission, hydrodynamic radius of scattering objects, and their concentrations in solutions are derived. The temperatures of phase separation onset T ₁ and end T ₂ are determined. It is shown that an increase in the salt content in solution leads to reduction in the polymer solubility and in temperatures T ₁ and T ₂. The watersalt solutions retain all the regularities of phase-separation temperature variation observed for aqueous solutions with change in the concentration of solution and pH of a medium: the values of T ₁ and T ₂ increase upon dilution and growth of acidity.     

Synthesis and Characterization of Butyl Acrylate-based Graft Polymers with Thermo-responsive Branching Sites <Emphasis Type="Italic">via</Emphasis> the Diels-Alder Reaction of Furan/Maleimide

Thermo-responsive butyl acrylate/furfuryl methacrylate copolymer-based (PBF backbone) graft (co)polymers with dynamic covalent linkages between their backbones and side chains via the Diels-Alder reaction of furan/maleimide were synthesized. Atom transfer radical polymerization (ATRP) was used to synthesize graft copolymers with thermo-responsive transformation from graft copolymers to linear polymers with bimodal or wide MWD. The NMR measurements indicated that the Diels-Alder reaction and retro-Diels-Alder reaction occurred, depending on the change of the temperature, meaning that the side chains could be cleaved and reformed according to the variation of the temperature. GPC measurements demonstrated that the molecular weights of the polymers were thermoresponsive. Furthermore, three graft copolymers with various branching chains (PBF-g-PBA, PBF-g-P(BMA-co-MA) and PBF-g-PBMA) were compared to study the influence of compatibility between the backbone and the branching chain on the efficiency of Diels-Alder reaction after the cleavage of the DA linkage. The results showed that the ability of the side chains to come back to the main chain was strongly affected by the compatibility between the backbone and the side chains and the flexibility of the polymer chains.     

An enhanced immobilization of BSA biomolecule on anionic hydrogels: swelling and adsorption modeling

The three-dimensional structure of hydrogels plays a leading role in several areas of applications. The hydrogels are more and more used as systems of immobilized and controlled release of biomolecules in biotechnology and bio-pharmacy industries. To improve protein adsorption capacity in poly(acrylamide) hydrogels, maleic acid co-monomer was included into the reaction mixture during hydrogel synthesis. So, hydrogels of poly(acrylamide) and its copolymers with diprotic maleic acid were prepared by copolymerization and chemical crosslinking with N,N′-methylene bis-acrylamide. Swelling behavior in distilled water, in physiological saline and in bovine serum albumin (BSA) solutions was studied. Influence of initial BSA concentration on hydrogel swelling and BSA adsorption was investigated. The high amount of maleic acid present in the hydrogels has a significant effect on the swelling behavior and BSA adsorption. Results showed that the pH sensitivity of hydrogels resulted in the high amount of adsorbed BSA. The adsorption isotherms were described by Langmuir and Freundlich models. The thermodynamic parameter (ΔG _ads ⁰ ) was determined for all obtained hydrogels. We demonstrated the favorable character and reversibility of the BSA adsorption process.     

Rearrangements of <Emphasis Type="Italic">N</Emphasis>-ethoxycarbonylmethyl-1,2,3,4-tetrahydroquinolinium halogenalkylates effected by sodium hydride. Synthesis of 2,3,4,5-tetrahydro-1<Emphasis Type="Italic">H</Emphasis>-3-benzazepines

Quaternary salts obtained from N-alkyl-1,2,3,4-tetrahydroisoquinolines and ethyl haloacetates or diethyl bromomalonate under the action of sodium hydride in boiling 1,4-dioxane were converted into N-alkyl-N-ethoxycarbonyl-2,3,4,5-tetrahydro-1H-3-benzazepines in 49–60% yield. From the reaction mixture by column chromatography products of β-elimination by Hofmann reaction, 2-(N-methyl-N-ethoxycarbonylmethyl)-aminomethylstyrenes were also isolated (yield 0.6–16%).     

Solvent dependent swelling behaviour of poly(<Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam) and poly(<Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam-<Emphasis Type="Italic">co</Emphasis>-itaconic acid) gels and determination of solubility parameters

Swelling behaviour of poly(N-vinylcaprolactam) (PVC) and poly(N-vinylcaprolactam-co-itaconic acid) (P(VC-co-IA)) gels was investigated in different solvents (water, ethanol, methanol, isopropyl alcohol (IPA), chloroform, toluene, acetone) and in binary solvent mixtures (ethanol/chloroform, ethanol/methanol, IPA/chloroform, ethanol/water, IPA/water). Gels were synthesised in ethanol by the free radical cross-linking polymerisation method at 60°C for 24 h in the presence of azo-bis(isobutyronitrile) and allyl methacrylate as the initiator and cross-linker, respectively. And also, ethanol/distilled water mixture (?_r = 4:1) was used as the synthesis medium to determine its effect on the swelling of gels. It was found that the presence of water in the synthesis medium significantly affected the equilibrium swelling value (ESV) and the swelling tendency of gels both in solvents and in solvent mixtures. All gels synthesised in ethanol showed the highest swelling in chloroform. The gels synthesised in the ethanol/water mixture displayed different swelling behaviour. In this case, while chloroform was still valid for maximum swelling of PVC, P(VC-co-IA) had the highest swelling in methanol. Solubility parameters of gels were predicted by the van Krevelen-Hoftyzer (VKH) and Hoy methods (group contribution methods) and theoretical calculations verified the experimental swelling order.