PVC燃烧时HCl的释放规律

火灾中PVC燃烧后会产生大量HCl气体,危及人的生命安全.利用火灾烟气发生装置和红外傅立叶变换气体分析仪(FTIR)对PVC热解和燃烧时产生的烟气中的HCl气体浓度进行了实时在线的定量分析,结果表明PVC在受热升温后的热解阶段就会释放出大部分HCl气体,使得烟气毒性达到峰值.对于PVC燃烧产生的火灾,其烟气毒性最大工况发生在火焰出现之前.     

PVC燃烧时HCI的释放规律

火灾中PVC燃烧后会产生大量HCl气体，危及人的生命安全。利用火灾烟气发生装置和红外傅立叶变换气体分析仪（FTIR）对PVC热解和燃烧时产生的烟气中的HCl气体浓度进行了实时在线的定量分析，结果表明PVC在受热升温后的热解阶段就会释放出大部分HCl气体，使得烟气毒性达到峰值。对于PVC燃烧产生的火灾，其烟气毒性最大工况发生在火焰出现之前。     

单光子电离飞行时间质谱仪对香烟新鲜主流烟气的在线检测

利用单光子电离飞行时间质谱仪对吸烟模拟装置中的新鲜主流烟气进行实时在线检测,共测得40多种挥发性有机化合物,获得不同物质在逐口吸烟过程中含量的变化情况以及不同通风率的香烟烟气中的化合物含量情况。与此同时,使用主成分分析法对不同通风率的香烟种类的新鲜烟气的谱图进行分析,结果表明,在PCA散点图中,PC1=94%,PC2=3%,PC2=1%,三者之和达到98%,不同通风率的香烟的差异显著。实现了对逐口吸烟产生的新鲜主流烟中的有机成分进行在线检测分析。     

真空紫外灯电离源飞行时间质谱仪的研制及应用

为了实时、在线分析卷烟烟气,研制了一台采用真空紫外灯作电离源的光电离飞行时间质谱仪,主要由真空系统、进样接口、光电离室、离子传输区、反射式飞行时间质量分析器和数据采集系统等组成;采用甲苯标准气体对仪器的质量精度、分辨率、检出限和标准工作曲线等性能参数进行了测试;同时考察了该质谱仪在卷烟主流烟气气相化学成分分析中的应用。结果表明:质谱仪的质量精度优于1.0×10~(-4),分辨率优于2000,对甲苯的定性检出限为0.41 mg/m~3,标准工作曲线相关系数可达0.9990;质谱仪采用毛细管进样方式,能够直接与商用吸烟机联用,可实现在2 s内获得新鲜单口烟气气相化学成分的信息,非常适合对卷烟烟气进行实时、在线分析。     

氢同位素气体在线分析装置研制及分析方法建立

为了实现氢同位素气体在线检测,利用气体低气压辉光放电性质,设计加工了氢同位素在线测定装置并建立了辉光放电原子光谱法在线测定氢同位素的分析方法。该装置由辉光放电管、激发光源、真空–微量进气系统、光谱仪及数据采集系统等部件组成。采用不同含量的系列氕氘气体作为标准气体,绘制标准工作曲线,建立了氢同位素在线检测分析方法,氕氘气体的检出限均为0.04%,氕浓度、氘浓度和氕氘浓度比测量的相对标准偏差分别为3.6%,5.2%和2.4%(n=6)。该分析装置性能稳定可靠,操作简单,可实现氢同位素气体在线检测。     

高聚物拉伸形变中的声发射

对一系列高聚物进行了单轴拉伸过程中声发射的观察,包括玻璃态高聚物、结晶高聚物、共聚物、共混高聚物和一种交联橡胶。非晶态高聚物拉伸时声发射次数很少,伴随银纹和微裂缝的产生而出现。结晶高聚物在屈服成颈时出现强的声发射,在颈部拉伸的初期声发射较少或不出现,拉伸到接近试件断裂前声发射强烈,次数急剧增多。相同高聚物但试件加工成形历史不同会在声发射上得到反映。交联的顺丁橡胶拉伸时声发射很弱,但可以观察到,在拉力-形变曲线开始偏离线性后出现,没有Kaiser效应。共混高聚物拉伸时声发射很多。高耐冲击共混接枝塑料在断裂前不出现强烈的声发射。如试样和试件加工成形条件相同,声发射现象的重演性是相当好的。     

单颗粒气溶胶飞行时间质谱仪分析香烟烟气气溶胶

单颗粒气溶胶飞行时间质谱可同时对气溶胶单颗粒的粒径大小、化学成分进行实时、在线检测.本研究介绍了新近研制的单颗粒质谱仪的原理、结构、主要技术指标及对香烟烟气气溶胶的应用研究.仪器采用空气动力学透镜聚焦,双光束粒径测量系统确定颗粒物的空气动力学直径,激光电离系统实现颗粒物精确电离,通过双极有网反射飞行时间质量分析器实现正负离子同时检测.香烟检测结果表明,在颗粒物粒径分布上,新鲜香烟烟气颗粒范围较老化烟气宽.在气溶胶化学成分上,老化烟气颗粒物与新鲜烟气相比,尼古丁,氰酸盐,硝酸盐,硫酸盐及铵盐5种成分的数浓度百分比都有所增加,而含C1-的数浓度百分比减少.原因可能是由于烟气由气相到粒相之间的转化,及颗粒物与空气中的气体发生了非均相反应;C1-老化之后的减少是因为HN03与CI-之间的非均相反应.     

在线采样技术在中国的发展

在线采样技术能实时采样,满足在线监测的采样要求。按照采样进样介质的不同分为气体、液体、固体三类。对气体中有毒气体、大气颗粒物、VOCs,液体中水样、原油,固体中煤的机械化采样技术进行了概述,旨在帮助了解在线采样技术在国内矿业、环境行业的发展和应用。随着5G时代的到来,在线采样技术一定会发挥越来越重要的作用。     

在线采样技术在中国的发展

在线采样技术能实时采样,满足在线监测的采样要求。按照采样进样介质的不同分为气体、液体、固体三类。对气体中有毒气体、大气颗粒物、VOCs,液体中水样、原油,固体中煤的机械化采样技术进行了概述,旨在帮助了解在线采样技术在国内矿业、环境行业的发展和应用。随着5G时代的到来,在线采样技术一定会发挥越来越重要的作用。     

高温傅里叶变换红外气体分析仪研制与应用

为了满足固定污染源在线分析仪器比对和现场环境监督检查的需要,研制了一种基于傅里叶红外(FTIR)光谱分析技术的高温便携式红外气体分析仪。在实验室模拟烟气条件下,采用该分析仪进行SO_2和NO标气检测,其示值绝对误差分别小于1.5μmol/mol和1.0μmol/mol。该设备在某垃圾焚烧厂的脱硝前烟气进行监测,监测结果的趋势变化与在线监测结果具有较好的对应性,其监测结果平均值的绝对误差在标准容许误差范围内,表明该分析仪具有较好的准确性和现场应用能力,能够满足检测需求。     

Thermal decomposition products of a chlorinated aromatic polyamide

Products from the thermal decomposition of a chlorinated aromatic polyamide fabric are described for conditions of pyrolysis and flaming and nonflaming oxidative degradation. Volatile degradation products were identified by gas chromatography-mass spectrometry (GC-MS) and the condensible fraction, by infrared (IR) spectroscopy, high-pressure liquid chromatography (HPLC), and MS. Nonvolatile char was characterized by IR and elemental analysis. Twenty-one compounds were identified as volatile products from pyrolysis at 550°C; the condensible material contained ammonium chloride and at least 22 organic compounds. From volatile compounds produced in flaming oxidative degradation 21 compounds were identified, of which CO, CO₂, and H₂O were prominent. Nonflaming oxidative degradation at 400 and 550°C produced 11 and 21 volatile identifiable compounds, respectively, and results from experiments at the higher temperature compared favorably with results from the flaming experiments. By comparison of data from this work with those from unchlorinated analogs (described in an earlier article), it is concluded that the incorporation of chlorine into the polymeric structure lowers the temperature for the onset of thermal degradation and alters the type and concentration of thermolytic products. The major degradation products can be explained by a mechanism similar to that proposed for aromatic polyamides with the exception of the formation of substantial amounts of ammonium chloride. It is proposed that the latter is formed by an initial acid-catalyzed hydrolysis reaction which is followed by deammoniation or by an intermolecular process that involves an isoimide intermediate.     

Protective Effect of Water against Toxicity of Pyroiysis and Combustion Products of Wood and Polyvinyl Chloride)

The toxicity by inhalation of combustion and pyroiysis products of a PVC and a wood (Douglas Fir) has been studied by the physiogram method, in the rabbit in controlled ventilation and by the mask cage method in spontaneous ventilation. The protecting effect of water was evaluated by trapping the gases and vapors with an impinger placed on the air flow just before the animals. Combustion and pyrolysis products were generated by an annular furnace moving along a strip of samples. The temperature of the furnace was 400°C for smoldering conditions and 850°C for flaming conditions. CO, CO₂, 0₂, and HC1 were determined in the atmospheres; pO₂, pCO₂, pH, CO, COHb in the animals' blood and EEG, EKG, and arterial pressure were recorded. The animals are very significantly protected by water against PVC fumes (HC1 is very soluble in water) and in part protected against fumes from combustion of wood. In both cases, CO is not trapped and seems to be then the determinant toxicant.     

Factors affecting the combustion toxicity of polymeric materials

Fire gas toxicity is an essential component of any fire hazard analysis. However, fire toxicity, like flammability, is both scenario and material dependent. A number of different methods exist to assess the fire toxicity, but many of them fail to relate this to a particular fire scenario. Sample thickness alone, in a closed box test such as the NBS Smoke Chamber, is shown to change the fire scenario from well-ventilated to under-ventilated. Data from two flow-through tests, the static tube furnace (NF X 70-100) and the steady state tube furnace (the Purser furnace, BS 7990 and ISO TS 19700) show that there are different patterns of behaviour for different polymers (LDPE, polystyrene, rigid PVC and Nylon 6.6). The predicted toxicities show variation of up to two orders of magnitude with change in fire scenario. They also show change of at least one order of magnitude for different materials in the same fire scenario. Finally, they show that in many cases CO, which is often assumed to be the most, or even the only toxicologically significant fire gas, is of less importance than either HCl, or HCN, when present, and in some cases less important than organo-irritants. Nylon 6.6 shows the highest predicted toxicity, the greatest scenario dependence, and the least sensitivity to different apparatuses, while polystyrene shows the highest sensitivity to the different apparatuses, but the lowest to different fire scenarios. PVC shows high toxicity, mostly due to HCl in the fire effluent, under all fire conditions, and LDPE shows a more progressive increase in toxicity from well-ventilated flaming to both smouldering and under-ventilated flaming.     

热脱附-单体稳定同位素技术测定挥发性有机物

采用热脱附与稳定同位素质谱联用技术分析了城市不同源及大气环境中挥发性有机物排放的单体同位素特征。系统考察了样品进样量、进样方式和样品分离度对同位素分馏影响情况。使用填有Tenax TA的吸附管采集汽油车尾气、汽油挥发、柴油车尾气、柴油挥发、溶剂挥发和餐饮油烟等污染源,以及城市不同功能区的挥发性有机物(VOCs)样品,不同污染源中挥发性有机物的稳定碳同位素δ13C值不同,97#汽油车尾气的δ13 C值偏重,平均值为-25.84‰,富集13 C;餐饮油烟的δ13 C值偏轻,平均值为-30.26‰。油品挥发比燃烧后以尾气的形式排放的苯系物δ13 C值重。厦门市各功能区挥发性有机物的δ13 C平均范围在-27.03‰~-25.40‰,接近于汽油和柴油挥发及尾气中的δ13 C值,表明厦门市空气中挥发性有机物以机动车排放源为主。     

膨胀型无卤阻燃HIPS热分解动力学及阻燃机理研究

利用动态热失重法(TGA)研究了一种新型的膨胀型无卤阻燃高抗冲聚苯乙烯(HIPS)热降解反应动力学及阻燃机理, 通过对Kissinger模型和Coat-Redern (C-R)模型求解的热降解反应的动力学参数对比, 最终确定反应的动力学参数. 其中, 反应级数n的确定是通过一般反应对Ea/RTmax取值范围的限定, 利用最大热降解速率所对应的失重率αmax与n的关系, 确定其取值. 并采用TGA-FTIR及Py-GC/MS对材料气相产物及热裂解产物进行了阻燃机理的研究. 研究表明, 两种反应的热降解反应动力学参数基本一致, 其中阻燃HIPS的平均表观活化能小于纯HIPS, 说明在HIPS分解之前, 无卤阻燃剂已经开始分解, 释放的难燃气体(氨气及其衍生物、水蒸气等)在气相中起到阻燃的作用. 同时阻燃剂的添加, 促使反应向链转移反应飘移, 使燃烧产物中非单体化合物增加, 而在凝聚相中形成的致密的炭层结构也起到阻燃的效果.     

Arduino实时在线监测系统在聚甲基丙烯酸甲酯本体聚合过程中的应用

利用自主研发的实时在线监测系统，对不同聚合温度条件下，聚甲基丙烯酸甲酯（PMMA）的本体聚合过程进行实时在线监测，建立"虚拟信号值-反应时间"实时在线监测曲线.通过曲线的变化，可以清晰观察到PMMA本体聚合过程的4个阶段，即诱导期、初期、中期和后期.根据本体聚合"转化率-反应时间"S型曲线的特点，构建"虚拟信号值-反应时间-转化率"关系曲线和聚合物转化率计算公式，并提出PMMA预聚体的预测和实时在线监测方法.方法具有操作简单、实时性强、外界因素影响小和性能稳定等优点，是一种新型的实时在线分析方法.     

Ignitability of Polymers Related to Polymer Properties and Different Steady States of Combustion Theoretical Approach

A mathematical model of ignition and burning of organic polymers was used for evaluation and quantification of the tendency of polymers to ignition. The model permits investigation of the influence of one parameter of the polymer on the others. It was found that the model could be used for the verification of the ignitability method developed by Miller et al. [1]. Different steady states of combustion were found when using the model proposed. There is a characteristic steady state for normal flaming combustion, another for non-flaming combustion, and there are also unstable steady states that have no real physical meaning. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal Decomposition of Dolomite in an Atmosphere of Carbon Dioxide: The effect of procedural variables in thermal analysis

The effects of procedural variables on dolomite decomposition in carbon dioxide were investigated. The partial pressure of carbon dioxide causes dolomite decomposition to split into a two-stage process. It was observed that the first stage of dolomite decomposition is progressively displaced to higher temperatures with an increase in heating rate. However, the second stage is not affected significantly by changes in the heating rate. These studies also indicate that decrepitation analysis on dolomite in CO₂ provides better information as compared to experiments in other atmospheres. The flow rate of the purge gas does not influence the thermal behavior of dolomite.This revised version was published online in November 2005 with corrections to the Cover Date.     

Screening of antioxidant activity and volatile compounds composition of Chamerion angustifolium (L.) Holub ecotypes grown in Lithuania

Since biological activity of medicinal plants is dependent on cultivation area, climatic conditions, developmental stage, genetic modifications and other factors, it is important to study flora present in different growing sites and geographical zones. This study was focused on screening of antioxidant activity of C. angustifolium harvested in six different locations in Lithuania. The total contents of phenolic compounds, flavonoids and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity were evaluated by spectrophotometric methods. A correlation between radical scavenging activity and total phenolic compounds content was observed (correlation coefficient 0.98). HPLC with online post-column DPPH radical scavenging reaction detection was used for the separation of extracts. Oenothein B, rutin and one unidentified compound were predominant. Volatile compounds were analysed using solid-phase microextraction coupled with gas chromatography–mass spectrometry. Based on the analysis of volatiles, all samples were classified into two chemotypes: (I) with predominant α- and β-caryophyllenes and (II) with predominant anethole.     

Gas Chromatographic Separation of Carbonyl Compounds as Their 2,4-dinitrophenylhydrazones Using Glass Capillary Columns

The gas chromatographic separation of 22 carbonyl compounds as their 2,4-dinitrophenylhydrazones was investigated using glass capillary columns. Complete separation of the 2,4-dinitrophenylhydrazones of ten aliphatic aldehydes, eight aliphatic ketones and four aromatic aldehydes was obtained, except for the derivatives of n-valeraldehyde and isobutyl methyl ketone, whose peaks overlapped, and the o- and m-tolualdehyde derivatives, which were poorly separated. The optimum conditions were as follows: stationary phase, SF-96; column size, 20 m × 0.25 mm I.D. ; column temperature, 200-240°; injection and detector temperatures, 280-290°; carrier gas flow-rate, helium 1.0-1.2 ml/min or nitrogen 1.1-1.2 ml/min. The method was applied to the analysis of aliphatic carbonyl compounds in car exhaust fumes and cigarette smoke.