Synthesis of biocompatible hydrophobic silica-gelatin nano-hybrid by sol-gel process

Silica-biopolymer hybrid has been synthesised using colloidal silica as the precursor for silica and gelatin as the biopolymer counterpart. The surface modification of the hybrid material has been done with methyltrimethoxysilane leading to the formation of biocompatible hydrophobic silica-gelatin hybrid. Here we are reporting hydrophobic silica-gelatin hybrid and coating precursor for the first time. The hybrid gel has been evaluated for chemical modification, thermal degradation, hydrophobicity, particle size, transparency under the UV-visible region and morphology. FTIR spectroscopy has been used to verify the presence of CH(3) groups which introduce hydrophobicity to the SiO2-MTMS-gelatin hybrids. The hydrophobic property has also been tailored by varying the concentration of methyltrimethoxysilane. Contact angle by Wilhelmy plate method of transparent hydrophobic silica-gelatin coatings has been found to be as high as approximately 95 degrees . Oxidation of the organic group which induces the hydrophobic character occurs at 530 degrees C which indicates that the surface hydrophobicity is retained up to that temperature. Optical transmittance of SiO2-MTMS-gelatin hybrid coatings on glass substrates has been found to be close to 100% which will enable the hybrid for possible optical applications and also for preparation of transparent biocompatible hydrophobic coatings on biological substrates such as leather.     

Inorganic–organic sol gel hybrid coatings for corrosion protection of metals

Inorganic–organic hybrid coatings by sol–gel process are very suitable for fighting corrosion. Inorganic sols in hybrid coatings not only increase adhesion by forming chemical bonds between metals and hybrid coatings, but also improve comprehensive performances of polymer in the coatings. Different organic polymers or organic functionalities are introduced into gel network to achieve tailored properties, such as hydrophobic properties, increasing cross-linking density, etc. As for corrosion protection of metals organic components of hybrid coatings are selected to repel water and form dense thick films and reduce coating porosity. The factors, such as the ratio of inorganic and organic components, cure temperature, pigments in hybrid coatings, need to be optimized for attaining hybrid films with the maximum corrosion resistance. Electro-deposition technique offers relatively thick homogeneous defect-free hybrid coatings in comparison to dip or spin coating techniques. Green cerium ions and non-ionizable organic inhibitors are more developed in hybrid coatings nowadays than other corrosion inhibitors. Long-term corrosion resistance techniques of inhibitors are discussed. The inhibitors entrapped in the nanocontainers are doped in hybrid films to prolong release of the inhibitors to damaged zones, which is discussed in detail. Among all the nanocontainers of corrosion inhibitors the prospective techniques which show superior corrosion protection are cyclodextrin/organic inhibitor inclusion complexes and layer by layer assembly of organic corrosion inhibitors in nanocontainers. Super-hydrophobic property of hybrid coatings derives from low surface tension and surface roughness of hybrid coatings, which endues the films with excellent corrosion protection for metals, but the durable property of super-hydrophobic coatings needs to be improved for industrial application. An ideal multiple model of hybrid coatings for superior anti-corrosion of metals proposed is a combination of super-hydrophobic hybrid coatings and underlying hybrid coatings doped with sustained release of corrosion inhibitors on metal substrates.     

Scratch and Abrasion Resistant Coatings on Plastic Lenses—State of the Art,Current Developments and Perspectives

The manufacturing of ophthalmic lenses is one of the most important markets worldwide and, therefore, strong research efforts are undertaken to continuously improve the quality of the products, either silicate glasses or organic polymer lenses. Hybrid sol-gel based materials play a major role in this highly competitive field and have contributed significantly to the commercial success of the organic base materials. Recent developments concern fast curing and patternable coatings that might soon become part of this business. The compatibility of hybrid sol-gel materials either with organic dyes or with inorganic vacuum borne coatings offers further possibilities to develop highly sophisticated lenses meeting not only customer needs like perfect corrective function, high optical quality and protection, but also high durability as well as cosmetic and decorative aspects. An overview and a few recent developments are outlined below.     

Effect of Sintering Temperature on the Corrosion and Wear Behavior of Protective SiO2-Based Sol-Gel Coatings

Sol-gel hybrid organic-inorganic and inorganic SiO₂-based protective coatings with and without added 3 m glass particles were developed and tested for their corrosion and wear behavior of an stainless steel substrate (AISI316L). The corrosion resistance greatly increases by incorporating glass particles in the sols. The incorporation of particles in the coatings allows the synthesis of thicker crack-free coatings. On the other hand, the corrosion resistance increases for coatings with a higher organic content obtained at lower sintering temperature. These coatings are also highly stable in saline aqueous solutions. However, the wear resistance is badly affected by the hybrid character of the SiO₂ matrix. The optimum coating process in terms of corrosion and wear resistance, appears to be a hybrid system with a dense SiO₂ network achieved at intermediate sintering temperatures.     

Advances in organic–inorganic hybrid sorbents for the extraction of organic and inorganic pollutants in different types of food and environmental samples

The efficiency of the extraction and removal of pollutants from food and the environment has been an important issue in analytical science. By incorporating inorganic species into an organic matrix, a new material known as an organic–inorganic hybrid material is formed. As it possesses high selectivity, permeability, and mechanical and chemical stabilities, organic–inorganic hybrid materials constitute an emerging research field and have become popular to serve as sorbents in various separaton science methods. Here, we review recent significant advances in analytical solid‐phase extraction employing organic–inorganic composite/nanocomposite sorbents for the extraction of organic and inorganic pollutants from various types of food and environmental matrices. The physicochemical characteristics, extraction properties, and analytical performances of sorbents are discussed; including morphology and surface characteristics, types of functional groups, interaction mechanism, selectivity and sensitivity, accuracy, and regeneration abilities. Organic–inorganic hybrid sorbents combined with extraction techniques are highly promising for sample preparation of various food and environmental matrixes with analytes at trace levels.     

Immobilization of Glucose Oxidase on Ordered Macroporous Silicas Functionalized with Amino Group

A novel glucose oxidase immobilized on three‐dimensionally ordered macroporous (3DOM) material has been prepared by firstly preparation of hybrid 3DOM SiO₂‐NH₂ materials using colloidal crystal method, and following covalent immobilization of glucose oxidase on the pore walls of the 3DOM materials. The materials were characterized by SEM, FTIR, DSC and BET techniques. SEM observation shows that the macropores are highly ordered and are interconnected by small windows. FTIR measurement shows that there are amino and organic groups in the pore walls. The surface area of the 3DOM SiO₂‐NH₂ material is about 10.2 m²/g. The loaded amount of enzyme is increased with amino content in the materials. The immobilized enzyme has high activity, thermal stability and can be reused.     

Damage-resistant sol-gel optical coatings for advanced lasers at CEL-V

The research and development program at CEA Limeil-Valenton (CEL-V) concerning the mature technology of Nd:glass high power laser to Inertial Confinement Fusion (ICF) experiments has urged us to investigate and develop highly laser damage resistant optical coatings. Among the various existing deposition techniques, we have considered, the so-called sol-gel one has revealed very attractive technical and economical features. The chemical method we have explored is quite innovative since it allows making optical thin-films with a low-temperature route, using essentially oxide-based colloidal suspensions. Up to date, we have been able to prepare onto vitreous or plastic or even crystalline substrates antireflective or highly reflective dielectric coatings that can withstand the very high fluences that should deliver the future energy-efficient lasers in the megajoule range. Depending the need, such coatings could be narrow or broadband, abrasion-resistant or also environmentally durable.The aim of this paper is to show how the sol-gel process we are currently validating at CEL-V might serve tomorrow projects such as the harnessing of fusion energy, the greatest technological challenge facing humanity, but also household article uses.     

Protection of organic pigments against photocatalysis by encapsulation

A model organic pigment (β copper phthalocyanine) was encapsulated by silica using water glass as a precursor. It is shown that the thickness, porosity and uniformity of silica shells (coatings) around individual pigment particles depend significantly on pH and temperature of synthesis. It is further demonstrated that the obtained silica shells can serve as an efficient protection against the highly reactive products of photocatalysis. The degree of protection depends not only on the thickness of silica shells but also on their porosity.     

Thermal Analysis,Microcalorimetry and Combined Techniques for the Study of Pharmaceuticals

Modern thermal analysis, microcalorimetry and new emerging combined techniques which deliver calorimetric, microscopic and spectroscopic data offer a powerful analytical battery for the study of pharmaceuticals. These techniques are very useful in all steps of development of new drug products as well as methods for quality control in production. The characterization of raw materials enables to understand the relationships between polymorphs, solvates and hydrates and to choose the proper development of new drug products with very small amount of material in a very short time. Information on stability, purity is valuable for new entities as well as for marketed drug substances from different suppliers. Excipients which vary from single organic or inorganic entity to complexes matrixes or polymers need to be characterized and properly controlled. The thermodynamic phase-diagrams are the basis of the studies of drug-excipients interactions. They are very useful for the development of new delivery systems. A great number of new formulations need proper knowledge of the behaviour of the glass transition temperature of the components. Semi-liquid systems, interactions in aqueous media are also successfully studied by these techniques. This revised version was published online in August 2006 with corrections to the Cover Date.     

Inorganic-Organic Polymers with Barrier Properties for Water Vapor,Oxygen and Flavors

With a new kind of barrier coating material, inorganic-organic polymers, it is possible to obtain high-barrier properties with respect to the permeation rates of oxygen, water vapor and volatile organic compounds.The hybrid polymers are accessible via the sol-gel technique. The inorganic network is formed as a result of controlled hydrolysis and condensation of alkoxysilanes, organoalkoxysilanes, acryloxysilanes or metal alcoholates. The organic network results from subsequent thermal or UV-induced polymerization of organo-functional groups.Due to the control of the inorganic and organic network densities and the insertion of specific functional groups to control the polarity of the resulting material, it was possible to develop high-barrier coatings with excellent adhesion properties on a wide variety of polymer films.These high-barrier coatings are also suitable as adhesives which can be used in laminates. The properties of the processable multilayer structures are preserved to a much higher extent than with other comparable, commercially available materials even under high mechanical and thermal stress and storage in humidity.     

Organic-Inorganic Insulating Coatings Based on Sol-Gel Technology

The approach for improving bending strength of temperature-resistant flexible ceramic electric insulating coatings prepared by sol-gel processing is considered. Starting suspensions, based on both tetraethoxysilane (TEOS)-derived modified sols and highly dispersed fillers such as Cr₂O₃, are used to deposit the coatings on metals and alloys. Some polymers and organic substances are tested as additives for improving flexibility of the ceramic coatings. The results of study of both bending strength and electrical strength of flexible hybrid organic-inorganic insulation formed on a nichrome wire are discussed. The data obtained on the chemical and phase structure of the coatings, which have been heat treated at temperatures from 95 to 1100°C, using DSC as well as X-ray scattering techniques are presented.     

Bioactive and Protective Sol-Gel Coatings on Metals for Orthopaedic Prostheses

The aim of this work has been the preparation and evaluation of sol-gel coatings for clinical applications. Research was focussed in the development of highly corrosion resistant and/or bioactive sol-gel coatings onto AISI 316L stainless steel. Hybrid SiO₂ sol-gel coatings inhibited corrosion and Fe diffusion, although no signal of bioactivity was detected. The inclusion of Ca- and P-alcoxides in the sol composition did not promote bioactivity. Bioactive coatings were obtained from suspensions prepared by adding glass (CaO·SiO₂·P₂O₅) particles to an hybrid organic-inorganic SiO₂ sol. The dissolution of glass particles promoted in vitro induction of apatite along with a slight reduction in the corrosion resistance of coated pieces. By combining an inner SiO₂ hybrid film acting as barrier against corrosion with an outer coating containing bioactive glass particles, a significant improvement in the electrochemical behaviour was observed. This double-layered coating showed in vitro signals of bioactivity, and preliminary in vivo tests gave promising results.     

CaP/壳聚糖复合膜层的电化学共沉积研究

用电化学共沉积方法在医用钛合金表面成功制备了CaP/壳聚糖复合膜层,并用XRD,SEM,FTIR漫反射光谱和XPS等对复合膜层化学组成及结构进行表征.结果表明,加入壳聚糖可使钙磷沉积层结构发生显著变化,将壳聚糖掺入钙磷沉积层,形成CaP/壳聚糖复合物和杂化物.力学实验表明,在钛基底表面未进行表面预处理条件下,CaP/壳聚糖复合膜层与钛基底的结合力高达2.6MPa,比单一CaP电化学沉积层与基底的结合力提高约4倍.文中还对壳聚糖参与表面电沉积反应机理进行了讨论.     

Morphology of a Poly(imide siloxane) Segmented Copolymer/Silica Hybrid Composite

The role of polydimethylsiloxane (PDMS) as a compatibilizer of polyimide/silica hybrid composites was investigated. Introduction of PDMS into a polyimide matrix retards the phase separation of hybrid composites and also prevents the formation of high‐molecular‐weight silicate. PDMS interacts with silica because of the similarity of its structure with the sol‐gel glass matrix of the silica precursor, indicating that poly(imide siloxane)/silica might be a good candidate material for organic/inorganic hybrid composites.     

Wet-chemical deposition of functional coatings for bone implantology

Since the early 1980s, research on the modification of bone implant surfaces by applying coatings has mainly focused on the application of inorganic calcium phosphate (CaP) coatings using physical deposition techniques. Organic components of the extracellular bone matrix, on the other hand, play an essential role in the process of bone healing, but cannot be applied using these physical techniques. Therefore, a recent trend in biomaterials research involves development of novel wet-chemical deposition techniques for both inorganic and organic coatings. This study reviews the major wet-chemical coating techniques that are used for the deposition of inorganic CaP coatings and organic biomolecules coatings.     

Synthesis and characterization of UV‐curable phosphorus containing hybrid materials prepared by sol–gel technique

In this study, a series of ultraviolet (UV)‐curable organic–inorganic hybrid coating materials containing phosphorus were prepared by sol–gel approach from acrylate end‐capped urethane resin, acrylated phenyl phosphine oxide oligomer (APPO), and inorganic precursors. TEOS and MAPTMS were used to obtain the silica network and Ti:acac complex was employed for the formation of the titania network in the hybrid coating systems. Coating performance of the hybrid coating materials applied on aluminum substrates was determined by the analysis techniques, such as hardness, gloss, impact strength, cross‐cut adhesion, taber abrasion resistance, which were accepted by international organization. Also, stress–strain test of the hybrids was carried out on the free films. These measurements showed that all the properties of the hybrids were enhanced effectively by gradual increase in sol–gel precursors and APPO oligomer content. The thermal behavior of the hybrid coatings was investigated by thermogravimetric analysis (TGA) analysis. The flame retardancy of the hybrid materials was examined by the limiting oxygen index (LOI); the LOI values of pure organic coating (BF) increased from 31 to 44 for the hybrid materials containing phosphorus (BF‐P:40/Si:10). The data from thermal analysis and LOI showed that the hybrid coating materials containing phosphorus have higher thermal stability and flame resistance properties than the organic polymer. Besides that, it was found that the double bond conversion values for the hybrid mixtures were adequate in order to form an organic matrix. The polycondensation reactions of TEOS and MAPTMS compounds were also investigated by ²⁹Si‐NMR spectroscopy. SEM studies of the hybrid coatings showed that silica/titania particles were homogenously dispersed through the organic matrix. In addition, it was determined that the hybrid material containing phosphorus and silica showed fibrillar structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Facile synthesis of magnetic hybrid metal–organic frameworks with high adsorption capacity for methylene blue

A magnetic hybrid material (Fe₃O₄‐COOH/HKUST‐1) was easily synthesized via a two‐step simple solvothermal method. Through adding sodium acrylate directly into the synthesis of Fe₃O₄ spheres, the surface has more carboxyl groups. It is notable that the reactions proceed without use of organic surfactants. The magnetic hybrid material was characterized using various techniques. The magnetic hybrid material has a high specific surface area (430.15 m² g⁻¹) and excellent magnetism (23.65 emu g⁻¹). It is an efficient adsorbent for removing organic dyes like methylene blue (MB) from aqueous solution. It also can be easily recovered from liquid media using an external magnetic field. Adsorption experiment shows the magnetic hybrid material possesses a high adsorption capacity (118.6 mg g⁻¹), and has high adsorption efficiency (94.3%) after five adsorption cycles with ethanol (0.2% HCl) as eluent. The sorption kinetics and isotherm analysis indicate these sorption processes are better fitted to the pseudo‐second‐order and Langmuir equations. Thermodynamic study shows the sorption processes are spontaneous and endothermic.     

Corrosion Protection of Tinplated Steel by Silica-Methacrylate Hybrid Coatings via Sol–Gel Process

In this work we present the development of two organic–inorganic hybrid coatings with interpenetrating network for corrosion protection of tinplated steel. The hybrid coatings were obtained from the hydrolytic condensation of tetraethoxysilane and 3-methacryloxypropyltrimethoxysilane, which has a free-radical polymerizable C?C double bond. The tri-functional monomers, triallyl isocyanurate and trimethylolpropane triacrylate (TMPTMA) with three C?C double bonds, were used to develop a highly cross-linked organic network attached to the inorganic moieties through covalent Si–C bonds, respectively. Both were characterized by Fourier transformed infrared spectroscopy and thermogravimetric analysis. The corrosion resistance performance was evaluated by potentiodynamic polarization, electrochemical impedance spectroscopy, and salt spray test. The results indicated that the Sol-TMPTMA hybrid coating exhibited excellent anti-corrosion ability by forming a physical barrier between tinplated steel substrate and its external environment.     

新型样品前处理材料在环境污染物分析检测中的研究进展

针对复杂样品的分析和痕量目标物的检测,样品前处理是必不可少的,高效的样品前处理技术不仅可以去除或减小样品基质干扰而且能够实现分析物的富集,提高分析检测的准确性和灵敏度.近年来,固相萃取、磁分散固相萃取、枪头固相萃取、搅拌棒萃取、固相微萃取等高效的样品前处理技术已在环境污染物分析检测中获得广泛关注,萃取效率主要取决于萃取...