锗硅量子阱结构带间吸收边研究

利用光电流谱的方法对锗硅量子阱结构的带间吸收边进行了研究.实验观察到了在不同的偏压和温度下,锗硅量子阱结构的带间吸收边谱线发生了有规律的变化.通过对锗硅量子阱材料的光电流谱的带间跃迁吸收边的拟合,得到了硅导带到锗价带的能带宽度分别为1.043 eV和1.050 eV.随着外加电场的增强,带边的吸收曲线向低能方向移动.通过理论计算得到了带间跃迁吸收边的漂移量与外加电场的关系,并与实验吻合较好.随着温度的降低,带间吸收边向高能方向偏移,对于这一现象给出了定性的解释,并通过拟合得到了禁带宽度随温度的变化率.     

Si/SiGe量子级联激光器的能带设计

详细论述Si/SiGe量子级联激光器的工作原理，通过对比找到一组合适的Si，Ge和SiGe合金的能带参数，进而应用6×6 k·p方法计算了不同阱宽、不同Ge组分Si/Si_1-xGe_x/Si量子阱价带量子化的空穴能级本征值及其色散关系，分析Si/Si_1-xGe_x/Si量子阱空穴态能级间距随阱宽和组分的变化规律，最后应用计算结果讨论了Si/SiGe量子级联激光器有源区的能带设计，有益于优化Si /SiGe量子级联激光器结构. 关键词： 硅锗材料 量子级联激光器 子带跃迁 k·p方法')" href="#">k·p方法     

具有新型有源区的量子级联探测器(特邀)

量子级联探测器是一种光伏型的子带间跃迁红外探测器,通过厚度渐变的啁啾量子阱中台阶状的子带分布,产生内建电场,使得有源区中的光生载流子定向输运,器件工作时无需外加偏压,避免了暗电流噪声的产生,能够实现室温长波红外响应。由于子带间跃迁吸收系数小、具有偏振选择性,量子级联探测器目前存在响应率低、对正入射响应无响应、探测率对温度敏感等问题。针对这些问题,本文介绍三种新型量子级联探测器有源区的设计,包括量子点/阱耦合、束缚-微带斜跃迁和小能量台阶有源区,在中波、长波和甚长波波段展现出优良的器件性能。     

InGaAsSb/AlGaAsSb长波长多量子阱激光器有源区的优化设计

系统地研究了波长为2.7μm的InGaAsSb/AlGaAsSb多量子阱激光器中有源区的优化设计.分别用含应变势的6带KP模型和抛物带模型计算价带和导带的能带结构，并得到薛定谔方程和泊松方程的自洽解，由此计算量子阱在载流子注入时的增益谱.研究表明制约量子阱增益的主要因素不是跃迁矩阵元，而是粒子数反转程度，尤其是空穴填充HH1子带的概率.增加压应变或减小阱宽都会提高量子阱增益.前者降低了价带HH1子带空穴的平面内有效质量；后者拉大了价带子带间距，尽管它同时略微增加了空穴有效质量.这两种因素都导致价带顶空穴态     

InGaAsSb／AIGaAsSb长波长多量子阱激光器有源区的优化设计

系统地研究了波长为2．7μm的InGaAsSb／AlGaAsSb多量子阱激光器中有源区的优化设计，分别用含应变势的6带KP模型和抛物带模型计算价带和导带的能带结构，并得到薛定谔方程和泊松方程的自洽解，由此计算量子阱在载流子注入时的增益谱，研究表明制约量子阱增益的主要因素不是跃迁矩阵元，而是粒子数反转程度，尤其是空穴填充HHl子带的概率，增加压应变或减小阱宽都会提高量子阱增益，前者降低了价带HHl子带空穴的平面内有效质量；后者拉大了价带子带间距，尽管它同时略微增加了空穴有效质量，这两种因素都导致价带顶空穴态密度的降低，提高了空穴在HHl子带的填充概率，最终提高了量子阱的增益，所得结论与已有的实验报道相符。     

基于p-n结中反常光电转换现象的新型带间跃迁量子阱红外探测器

实验发现p-n结中局域载流子具有极高抽取效率,同时伴随着吸收系数的大幅度增加.本文报道上述现象的发现和验证过程,以及基于此现象的新型带间跃迁量子阱红外探测器(interband transition quantum well infrared detector,IQWIP)原型器件的性能.采用共振激发光致发光光谱技术,在InGaN量子阱、InGaAs量子阱、InAs量子点等多个材料体系中均观察到了在p-n结电场作用下的载流子高效逃逸现象,抽取效率分别为95%,87.5%,88%.利用含有InGaAs/GaAs多量子阱的PIN二极管,实验尝试了制备新型的IQWIP原型器件.在无表面减反射膜的实验条件下,利用仅100 nm的有效吸收厚度,实现了31%的外量子效率.基于这个数值推算得到量子阱的光吸收系数达到3.7×10~4cm~(-1),该数值高于传统透射实验测量体材料和量子阱结果.此外,还利用InAsSb/GaSb量子阱材料体系进行了2μm以上波长红外探测的探索.利用上述现象,有望在提高现有器件性能的同时开发出新颖的光-电转换器件.     

p型GexSi1-x/Si多量子阱的红外吸收及其分析

通过测量GeSi多量子阱的红外谱，同时观察到了相应于量子阱内重空穴基态HH1到重空穴激发态HH1、轻空穴激发态LH1和自旋分裂带SO及连续态间的跃迁吸收．测量了GeSi多量子阱探测器的正入射光电流谱，看到了明显的光响应峰．理论计算中计及了轻、重和自旋分裂带间的耦合及能带的非抛物性，并自洽考虑了哈特里势和交换相关势．与实验结果比较，认为带之间的耦合，使子带间的跃迁情况变得复杂，是正入射吸收产生的原因 关键词：     

非对称双量子阱中载流子耦合的温度依赖性

非对称双量子阱中载流子动力学过程的温度依赖性研究,对于实现室温下高效的量子阱光电器件有着非常重要的意义。随着温度的升高,量子阱中的载流子被热激发到势垒层中后,部分载流子会被量子阱再俘获,即在不同的量子阱之间发生了载流子的耦合。利用耦合多量子阱载流子动力学模型,模拟了非对称双量子阱中载流子耦合的温度依赖性。研究表明,在不同温度下,各量子阱的光致荧光强度比强烈地依赖于量子阱的激活能差。光致荧光强度比的最大值与激活能差成指数关系,而其所对应的温度与激活能差成线性关系。     

半导体超晶格和量子阱中量子态的光谱研究

本文讨论半导体超晶格及量子阱导带和价带的量子化亚带或子能级之间的带间光跃迁过程。所讨论的光跃迁过程或光谱研究方法有吸收光谱、光电流谱、光荧光和荧光激发谱、调制光谱以及喇曼散射光谱。关于亚带能量状态将着重讨论量子阱中的激子效应和价带亚带混和及其对带间光跃迁的影响。     

半导体超晶格和量子阱中量子态的光谱研究

本文讨论半导体超晶格及量子阱导带和价带的量子化亚带或子能级之间的带间光跃迁过程。所讨论的光跃迁过程或光谱研究方法有吸收光谱、光电流谱、光荧光和荧光激发谱、调制光谱以及喇曼散射光谱。关于亚带能量状态将着重讨论量子阱中的激子效应和价带亚带混和及其对带间光跃迁的影响。     

Photoinduced infrared spectroscopy of bound-to-bound and bound-to-continuum transitions in SiGe/Si quantum wells

Infrared spectroscopy of intersubband transitions in the valence band of undoped SiGe/Si quantum wells is presented. Optical pumping of interband transitions is used to generate carriers in the wells. The spectral features of bound-to-bound and bound-to-continuum transitions are analyzed and compared to those of GaAs quantum wells. In samples with only one heavy hole bound level, a ratio of 20:1 is observed between intersubband and free carrier absorption. Room temperature photo-induced absorption is only observed in samples with high germanium content (≈50%). The feasibility of normal-incidence infrared modulators based on s-polarized intersubband absorption is also demonstrated. Resonant dispersion associated with intersubband transitions is evidenced.     

Intersubband absorption in modulation doped p-type Si1-xGex quantum wells: theory and experiment

A study of intersubband infrared absorption in modulation doped p-type Si/SiGe quantum wells is presented for SiGe wells with thicknesses between 22 Å and 64 Å and Ge contents in the range from 23% to 58%. The peak positions of the absorption lines are observed between 500 cm^-1 and 2200 cm^-1. Depending on the barrier height (i.e., on the Ge content of the wells), the heavy-hole states excited by the infrared radiation are either localized in the wells or strongly mixed with barrier-bound states and therefore delocalized. The shape of the absorption line correspondingly changes from a narrow Lorentz line to a rather broad absorption band. Using the structural parameters determined by high-resolution triple-axis x-ray diffraction, the results of a self-consistent Luttinger-Kohn type envelope function approach with the explicit inclusion of the strain in the quantum wells are in excellent agreement with the measured spectra.     

Built-in electric field effect on the linear and nonlinear intersubband optical absorptions in InGaN strained single quantum wells

Considering the strong built-in electric field (BEF) induced by the spontaneous and piezoelectric polarizations and the intrasubband relaxation, we investigate the linear and nonlinear intersubband optical absorptions in In_xGa_1-xN/Al_yGa_1-yN strained single quantum wells (QWs) by means of the density matrix formalism. Our numerical results show that the strong BEF is on the order of MV/cm, which can be modulated effectively by the In composition in the QW. This electric field greatly increases the electron energy difference between the ground and the first excited states. The electron wave functions are also significantly localized in the QW due to the BEF. The intersubband optical absorption peak sensitively depends on the compositions of In in the well layer and Al in the barrier layers. The intersubband absorption coefficient can be remarkably modified by the electron concentration and the incident optical intensity. The group-III nitride semiconductor QWs are suitable candidate for infrared photodetectors and near-infrared laser amplifiers.     

Enhancement of surface emission in deep ultraviolet AlGaN-based light emitting diodes with staggered quantum wells

The optical polarization properties of staggered AlGaN-AlGaN/AlN quantum wells (QWs) are investigated using the theoretical model based on the k·p method. The numerical results show that the energy level order and coupling relation of the valence subband structure change in the staggered QWs and the trend is beneficial to TE polarized transition compared to that of conventional AlGaN/AlN QWs. As a result, the staggered QWs have much stronger TE-polarized emission than conventional AlGaN-based QWs, which can enhance the surface emission of deep ultraviolet (DUV) light-emitting diodes (LEDs). The polarization control by using staggered QWs can be applied in high efficiency DUV AlGaN-based LEDs.     

The effects of hydrostatic pressure on the nonlinear intersubband transitions and refractive index changes of different QW shapes

In this study, the effects of hydrostatic pressure on the linear and nonlinear intersubband transitions and the refractive index changes in the conduction band of different quantum well shapes are theoretically calculated within framework of the effective mass approximation. Results obtained show that intersubband properties and the energy levels in different QWs can be modified and controlled by the hydrostatic pressure. The modulation of the absorption coefficients and the refractive index changes which can be suitable for good performance optical modulators and various infrared optical device applications can be easily obtained by tuning the hydrostatic pressure strength.     

Infrared absorption in SiGe/Si multiple quantum wells

Infrared absorption has been used to investigate the subband structures in SiGe/Si quantum wells. The quantum wells are prepared using RRH/VLP-CVD and consist of 20 periods of and 60 periods of . The good periodical and interface sharpness of the SiGe/Si quantum wells have been shown by Auger Electron Spectroscopy (AES). The absorption peaks due to transitions between the hole subbands and the conduction band have been observed in infrared absorption spectra. The transverse photocurrent spectrum parallel to the growth plane have also shown absorption peaks due to transitions between the heavy and light hole band states and the conduction band states in quantum wells.     

纤锌矿结构ZnO/Mg_xZn_(1-x)O量子阱中带间光吸收的尺寸效应和三元混晶效应

对于纤锌矿结构ZnO/MgxZn1-xO有限深单量子阱结构,考虑内建电场、导带弯曲及材料掺杂对实际异质结势的影响,利用有限差分法和自洽法数值求解Schr?dinger方程和Poisson方程,获得电子(空穴)的本征能级和本征波函数.进而,采用费米黄金法则讨论带间光吸收的尺寸效应和三元混晶效应.结果表明:三元混晶材料MgxZn1-xO中Mg组分的增加会增强垒层和阱层的内建电场强度,使得电子(空穴)平均位置靠近左(右)垒,导致带间跃迁吸收峰呈指数减小且发生蓝移;ZnO/MgxZn1-xO量子阱带间跃迁吸收峰随阱宽增大而减小,吸收峰发生红移.所得结果可为改善异质结构材料和器件的光电性能提供理论指导,以期获得实际应用所需的光学吸收频谱和波长.     

Calculation of Linear and Nonlinear Intersubband Optical Absorptions in Electric-Field-Biased Semiparabolic Quantum Wells

By using the compact density matrix approach and iterative procedure, a detailed procedure for the calculation of the linear and nonlinear intersubband optical absorption coefficients is given in the electric-field-biased semi-parabolic quantum wells (QWs). The simple analytical formulas for the linear and nonlinear optical absorption coefficients in the systems are also deduced. Numerical result on typical GaAs materials shows that, the linear and nonlinear optical absorption coefficients sensitively depend on the applied electric field and the confined potential frequency of the semiparabolic QW systems as well as the incident optics beam intensity.     

Long wavelength infrared (LWIR) photodetection in a modulation doped thyristor

A modulation doped thyristor concept is described for LWIR photodetection based upon intersubband bound to continuum absorption. The intersubband absorption generates photocurrent from undoped quantum wells to modulation doped layers (MDL). Due to the lower dark current compared to conventional quantum well infrared photodetectors (QWIPs), the thyristor infrared detector operates with little or no cooling and with similar or better performance than QWIPs at low temperatures. The operating characteristics of absorption coefficient, quantum efficiency, responsivity, detectivity, infrared gain, and dark current are determined as a function of thyristor voltage and input power level in the range of 1 μW/cm².     

Study of valence intersubband absorption in tensile strained Si/SiGe quantum wells

The hole subband structures and effective masses of tensile strained Si/Sil-yGey quantum wells are calculated by using the 6 × 6 k·p method. The results show that when the tensile strain is induced in the quantum well, the light-hole state becomes the ground state, and the light hole effective masses in the growth direction are strongly reduced while the in-plane effective masses are considerable. Quantitative calculation of the valence intersubband transition between two light hole states in a 7nm tensile strained Si/Si0.55Ge0.45 quantum well grown on a relaxed Si0.5Ge0.5 （100） substrates shows a large absorption coefficient of 8400 cm^-1.