Structural and spectral studies of N-2-(pyridyl)-, N-2-(3-, 4-, 5-, and 6-picolyl)- and N-2-(4,6-lutidyl)-N′-2-thiomethoxyphenylthioureas

Structures of the following compounds have been obtained: N-(2-pyridyl)-N′-2-thiomethoxyphenylthiourea, PyTu2SMe, monoclinic, P2₁/c, a=11.905(3), b=4.7660(8), c=23,532(6) Å, β=95.993(8)°, V=1327.9(5) ų and Z=4; N-2-(3-picolyl)-N′-2-thiomethoxyphenyl-thiourea, 3PicTu2SeMe, monoclinic, C2/c, a=22.870(5), b=7.564(1), c=16.941(4) Å, β=98.300(6)°, V=2899.9(9) ų and Z=8; N-2-(4-picolyl)-N′-2-thiomethoxyphenylthiourea, 4PicTu2SMe, monoclinic P2₁/a, a=9.44(5), b=18.18(7), c=8.376(12) Å, β=91.62(5)°, V=1437(1) ų and Z=4; N-2-(5-picolyl)-N′-2-thiomethoxyphenylthiourea, 5PicTu2SMe, monoclinic, C2/c, a=21.807(2), b=7.5940(9), c=17.500(2) Å, β=93.267(6)°, V=2893.3(5) ų and Z=8; N-2-(6-picolyl)-N′-2-thiomethoxyphenylthiourea, 6PicTu2SMe, monoclinic, P2₁/c, a=8.499(4), b=7.819(2), c=22.291(8) Å, β=90.73(3)°, V=1481.2(9) ų and Z=4 and N-2-(4,6-lutidyl)-N′-2-thiomethoxyphenyl-thiourea, 4,6LutTu2SMe, monoclinic, P2₁/c, a=11.621(1), b=9.324(1), c=14.604(1) Å, β=96.378(4)°, V=1572.4(2) ų and Z=4. Comparisons with other N-2-pyridyl-N′-arylthioureas having substituents in the 2-position of the aryl ring are included.     

General formulations for some polycyclic hydrocarbons. Di-q-polyhexes

Di-q-polyhexes are polygonal systems consisting of two q-gons each and otherwise only hexagons. General formulations are reported for the C_nH_s chemical formulae of such systems for q = 4, 5, 6. The case of q = 4 (terphenylenoids) is treated systematically for the first time. Constant-isomer series of C_nH_s formulae, which have been known to exist for benzenoids (q = 6) and indacenoids (q = 5), are reported here for terphenylenoids.     

Asymmetric hydroformylation with Pt-phosphine-SnCl2 and Pt-bisphosphine-CuCl2 (or CuCl) catalytic systems

A study has been made of asymmetric hydroformylation of styrene with PtCl₂(PPh₃)₂ + bisphosphine + SnCl₂ (bisphosphine: BDPP = (−)-(2S,4S)-2,4-bis(diphenylphosphino)pentane or DIOP = (−)-(4R,5R)-2,2-dimethyl-4,5-bis(diphenylphosphinomethyl)-1,3-dioxolane) and PtCl₂(bisphosphine) + PPh₃ + SnCl₂ catalysts prepared “in situ”. The presence of an excess of the phosphine ligand slightly lowered the reaction rate, but the enantioselectivity of these systems is significantly higher than those involving PtCl(SnCl₃)(bisphosphine) catalysts. Under mild reaction conditions 88.8% enantiomeric excess was achieved. Replacing SnCl₂ in these catalysts by CuCl₂ or CuCl gave a new homogeneous catalytic system which is active at higher reaction temperature (> 100°C), but has a rather moderate enantioselectivity.     

Synthesis of Pt compounds containing chiral (2S,4S) -pentane-2,4-diyl-bis(5H-dibenzo[b]phosphindole) as ligand and their use in asymmetric hydroformylation of styrene derivatives

Unlike bis(diphenyl)phosphine derivatives in general, (2S,4S)-pentane-2,4-diyl-bis(5H-dibenzo[b]phosphindole), S,S-BDBPP, gives a trans oligomeric compound [PtCl₂(S,S-BDBPP)]_n, 1, in reaction with dichloro-Pt precursors such as PtCl₂(PhCN)₂, PtCl₂(CH₃CN)₂ and PtCl₂(COD) at room temperature. Compound 1, which could be readily isolated, slowly rearranges in solutions at room temperature to the expected cis-monomer PtCl₂(S,S-BDBPP), 3. Heating or the presence of PtCl₂(COD) accelerates the transformation of compound 1 to 3. SnCl₂ adducts of both compounds, trans-[PtCl(SnCl₃)(S,S-BDBPP)]_n, 2, and cis-PtCl(SnCl₃)(S,S-BDBPP), 4, as well as the known cis-PtCl(SnCl₃)(S,S-BDPP), 5, (S,S-BDPP = (2S,4S)-2,4-bis(diphenylphosphino)pentane) have been tested as catalysts in the asymmetric hydroformylation of p-isobutylstyrene. The phenyl analog 5 provides up to 75% e.e. but moderate yields to chiral 2-(4-isobutylphenyl)-2-propanal. Compared to this, the regioselectivity to the branched aldehyde is remarkably increased; however, the enantioselectivity is drastically decreased by the use of both dibenzophosphole derivatives 2 and 4. The similarities in the selectivities provided by 2 and 4 indicate that the trans oligomer 2 transforms to the cis-monomer 4 during the catalytic process. X-ray crystal structure determination of compound 3 shows a half-chair conformation for the chelate ring with a symmetric arrangement of dibenzophosphole groups. Besides a preference for the latter achiral conformation, the planar structure of the dibenzophosphole groups can also be considered as reason for the moderate enantioselectivities provided by 4.     

Structural, spectral and thermal studies of N-2-(4-picolyl)- and N-2-(6-picolyl)-N′-(2-chlorophenyl)thioureas and N-2-(6-picolyl)-N′-(2-bromophenyl)thiourea

N-2-(4-picolyl)-N′-2-chlorophenylthiourea, 4PicTu2Cl, monoclinic, P2₁/c, a=10.068(5), b=11.715(2), β=96.88(4)°, and Z=4; N-2-(6-picolyl)-N′-2-chlorophenylthiourea, 6PicTu2Cl, triclinic, P-1, a=7.4250(8), b=7.5690(16), c=12.664(3) Å, =105.706(17), β=103.181(13), γ=90.063(13)°, V=665.6(2) ų and Z=2 and N-2-(6-picolyl)-N′-2-bromophenylthiourea, 6PicTu2Br, triclinic, P-1, a=7.512(4), b=7.535(6), c=12.575(4) Å, a=103.14(3), β=105.67(3), γ=90.28(4)°, V=665.7(2) ų and Z=2. The intramolecular hydrogen bonding between N′H and the pyridine nitrogen and intermolecular hydrogen bonding involving the thione sulfur and the NH hydrogen, as well as the planarity of the molecules, are affected by the position of the methyl substituent on the pyridine ring. The enthalpies of fusion and melting points of these thioureas are also affected. ¹H NMR studies in CDCl₃ show the NH′ hydrogen resonance considerably downfield from other resonances in their spectra.     

Solvatochromism of 3-[2-(aryl)benzoxazol-5-yl]alanine derivatives

The photophysical properties of N-Boc-3-[2-(9-anthryl)benzoxazol-5-yl]-l-alanine methyl ester (BoxAnt) and N-Boc-3-[2-[4-(9′-(10′-butyl)anthryl)phenyl]benzoxazol-5-yl]-l-alanine methyl ester (BoxPhAnt) were studied in a series of solvents. Their absorption spectra are less sensitive to the solvent polarity than the corresponding fluorescence spectra which show a pronounced solvatochromic effect leading to large Stokes shifts. Using an efficient solvatochromic method, based on the empirical solvent polarity parameter , a large change of the dipole moment on excitation for BoxPhAnt has been found. From an analysis of the solvatochromic behaviour of the absorption and fluorescence spectra in terms of bulk solvent polarity functions, f(_r, n) and g(n), a larger excited-state dipole moment (about 8 D, ψ = 56) was obtained for BoxPhAnt than for BoxAnt (about 3 D, ψ = 0). Both applied methods gave similar values of the excited-state dipole moments for both compounds studied.     

Enantioselective organic syntheses using chiral transition metal complexes V. (2S,3S)-Bis(dibenzophospholyl)butane, a rigid (S,S)-CHIRAPHOS analog

The P–Ph cleavage of phenyldibenzophosphole (1) with lithium in THF gives lithium dibenzophospholide (2). Reaction of 2 with ethyleneglycol ditosylate produces the known chelate ligand 1,2-bis(dibenzophospholyl)ethane (3) in good yield. Similarly, 2 and (2R,3R)-butanediol ditosylate give the new chiral chelate ligand (2S,3S)-bis(dibenzophospholyl)butane (4). Ligand exchange of [CpRu(PPh₃)₂Cl] with 3 or 4 yields the halfsandwich complexes [CpRu(C₁₂H₈PC₂H₄PC₁₂H₈)Cl] (5) and [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)Cl] (6). Complex 6 was characterized crystallographically (monoclinic, space group P2₁ (no. 4), a=820.6(4), b=1501.0(3), c=1172.8(6) pm, β=108.87(2)°, V=1.367(1)×10⁹ pm³, Z=2). The most conspicuous feature of the structure of 6 is the perfect coplanarity of the two dibenzophosphole moieties imposed by their steric interaction with the Cp ligand. Complex 6 and the thiophene complex [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)(SC₄H₄)]BF₄ (7) derived therefrom are remarkably unreactive with regard to ligand substitutions. A possible explanation is the lack of intramolecular

Full-size image

–C stabilization en route to the transition state of ligand substitution. The enantiomeric purity of 6 and 7 could nevertheless be demonstrated by conversion to diastereomerically pure [CpRu((S,S)-C₁₂H₈PCHMeCHMePC₁₂H₈)((S)-CNCHMePh)]BF₄ (8).     

Linking the loading dependence of the Maxwell–Stefan diffusivity of linear alkanes in zeolites with the thermodynamic correction factor

Molecular dynamics simulations have been carried out to determine the Maxwell–Stefan diffusivity Đ of C1–C4 linear alkanes for a range of molecular loadings, q, in AFI, MOR, MTW, and MFI zeolites. Configurational-Bias Monte Carlo simulations were used to determine the thermodynamic correction factor, Γ ≡ ∂ ln f/∂ ln q. For diffusion in the large 1D pores of AFI, Đ is proportional to 1/Γ. In other zeolite topologies with smaller pore sizes, though such a direct proportionality is not observed, the Đ–q dependence appears to be closely linked to the 1/Γ–q characteristics, especially when the latter exhibits strong inflection.     

A simple method for predicting the frequency of the infrared inactive carbonyl stretching mode in LM(CO)5 molecules with C4V symmetry

The paper presents a new method for predicting the frequency of the b₁ mode, which is infrared-inactive, in complexes of the type LM(CO)₅ belonging to C_4V point group. The method was based on the relation λ₃=λ₄+[(1−δ/δ)](λ₁−λ₂), where δ=(λ₁−λ₂)/(λ₁−λ₂+λ₃−λ₄), λ₁, λ₂, λ₃ and λ₄ are the λ parameters of the , , b₁ and e modes, respectively. For a large numbers of complexes of the type LM(CO)₅ the average value of δ was found to be 0.80, with a standard deviation of 0.02. With the use of average value of δ, the frequencies of b₁ mode were estimated. The result obtained indicated that there exists a rather good fit between observed and calculated frequencies, with a mean error of 2.7 cm⁻¹. In addition, it was shown that the δ parameter can be used as a criterion of the correct band assignment for the complexes understudy.     

Solution calorimetry to monitor swelling and dissolution of polymers and polymer blends

The observed rate of drug release from a polymeric drug delivery system is governed by a combination of diffusion, swelling and erosion. It is thus not a simple task to determine the effects of the polymer on the observed drug release rate, because the swelling characteristics of the polymer are inferred from the drug release profile. Here we propose to use solution calorimetry to monitor swelling. Powdered polymer samples (HPMC E4M, K4M, K15M and NaCMC, both alone and in a blend) were dispersed into water or buffer (pH 2.2 and 6.8 McIlvaine citrate buffers) in a calorimeter and the heat associated with the swelling phenomena (hydration, swelling, gelation and dissolution) was recorded. Plots of normalised cumulative heat (i.e. q_t/Q, where q_t is the heat released up to time t and Q the total amount of heat released) versus time were analysed by the power law model, in which a fitting parameter, n, imparts information on the mechanism of swelling.

For all systems the values of n were greater than 1, which indicated that dissolution occurred immediately following hydration of the polymer. However, while not suitable for determining reaction mechanism, the values of n for each polymer were significantly different and, moreover, were observed to vary both as a function of particle size and dissolution medium pH. Thus, the values of n may serve as comparative parameters. Properties of the polymer blends were observed to be different from those of either constituent and correlated with the behaviour seen for polymer tablets during dissolution experiments. The data imply that solution calorimetry could be used to construct quantitative structure–activity relationships (QSARs) and hence to optimise selection of polymer blends for specific applications.     

Synthesis, characterization and catalytic activity in Heck-type reactions of orthometallated Pd and Pt complexes derived from (1R,2R)-1,2-diaminocyclohexane

The chiral bis-imine (1R,2R)-C₆H₁₀-[E---N=CH---C₆H₃---3,4-(OMe)₂]₂ 1 (LH) reacts with [Pd(OAc)₂] (1:1 molar ratio; OAc=acetate) giving the orthometallated [Pd(OAc)(C₆H₂---4,5-(OMe)₂---2-CH=N-(1R,2R)-C₆H₁₀---N=CH---C₆H₃-3′,4′-(OMe)₂-κ-C,N,N)] 2 (abbreviated as [Pd(OAc)(L-κ-C,N,N)]), through C---H bond activation on only one of the aryl rings and N,N-coordination of the two iminic N atoms. 2 reacts with an excess of LiCl to give [Pd(Cl)(L-κ-C,N,N)] 3. The reaction of 3 with AgClO₄ and neutral or anionic ligands L′ (1:1:1 molar ratio) affords [Pd(L-κ-C,N,N)(L′)](ClO₄) (L′=PPh₃ 4a, NCMe 5, pyridine 6, p-nitroaniline 7) or [Pd(I)(L-κ-C,N,N)] 8. Complex 4a reacts with wet CDCl₃ giving [Pd(C₆H₂---4,5-(OMe)₂---2-CH=N-(1R,2R)---C₆H₁₀---NH₂-κ-C,N,N)(PPh₃)](ClO₄) 4b as a result of the hydrolysis of the C=N bond not involved in the orthometallated ring. The molecular structure of 4b·CH₂Cl₂ has been determined by X-ray diffraction methods. Cleavage of the Pd---N bond trans to the C_aryl atom can be accomplished by coordination of strongly chelating ligands, such as acetylacetonate (acac) or bis(diphenylphosphino)ethane (dppe), forming [Pd(acac-O,O′)(L-κ-C,N)] 9 and [Pd(L-κ-C,N)(dppe-P,P′)](ClO₄) 12, while classical N,N′-chelating ligands such as 1,10-phenantroline (phen) or 2,2′-bipyridyl (bipy) behave as monodentate N-donor ligands yielding [Pd(L-κ-C,N,N)(κ¹-N-phen)](ClO₄) 10 and [Pd(L-κ-C,N,N)(κ¹-N-bipy)](ClO₄) 11. Treatment of 1 with PtCl₂(DMSO)₂ (1:1 molar ratio) in refluxing 2-methoxyethanol gives Cl₂Pt[(NH₂)₂C₆H₁₀---N,N′] 13a and [Pt(Cl)(C₆H₂---4,5-(OMe)₂---2-CH=N-(1R,2R)---C₆H₁₀---NH₂-κ-C,N,N)] 13b, while [Pt(Cl)(L-κ-C,N,N)] 14 can be obtained by reaction of [Pt(μ-Cl)(η³-2-Me---C₃H₄)]₂ with 1 in refluxing CHCl₃. Complexes 2 and 3 catalyzed the arylation of methyl acrylate giving good yields of the corresponding methyl cinnamates and TON up to 847 000. Complex 3 also catalyzes the hydroarylation of 2-norbornene, but with lower yields and without enantioselectivity.     

Addition of a Reformatsky reagent to N-anthracene-9-sulfonyl and related imines: Synthesis of protected β-amino acids

The Reformatsky reagent tert-butoxycarbonylmethylzinc bromide adds in high yields to N-sulfonylimines, e.g. 1a–1d, derived by condensation of benzaldehyde dimethyl acetal with methanesulfonamide, toluene-4-sulfonamide, 4-(methoxycarbonyl)benzenesulfonamide and sulfamide: the products are protected β-amino acids 2a–2d. N-Deprotection occurs reductively (Na-naphthalene; low yields) for 2b and 2c or hydrolytically (refluxing aq. pyridine; 76% yield of amino acid 3a after acid hydrolysis of the t-butyl ester) for the sulfamide derivatives 2d. Anthracene-9-sulfonamide (6) is readily available by sulfonation and chlorination of anthracene, and condenses with aldehydes [RCHO; R = Ph, 4-FC₆H₄, 4-MeOC₆H₄, 4-NCC₆H₄, 2-furyl, (E)-styryl], e.g. in the presence of TiCl₄/Et₃N, to yield imines 7a–7f, which after addition of tert-butoxycarbonylmethylzinc bromide give protected amino acids 8a–8f; however, 8f cyclizes to the sultam 9 via a spontaneous intramolecular Diels-Alder reaction. Reductive cleavage of the N-anthracene-9-sulfonyl group is much easier than for traditional N-sulfonyl protecting groups, as demonstrated by the deprotection of 8a and 8c using aluminium amalgam.     

The gas-phase structure of dodecafluorooctahydrothiophene, c-C4F8SF4

The geometric structure of c-C₄F₈SF₄ has been determined by gas-phase electron diffraction. The five-membered ring has the twist form (C₂ symmetry) with a puckering amplitude q = 0.42 (2) Å. The following principle geometric parameters (r_a values) with estimated uncertainties have been derived: (C---C)_av = 1.541(10), S---C = 1.896(7), S---F_e = 1.558(6), S---F_a = 1.594(6) Å, CSC = 90.0(9)°, SCC = 109.1(8)°, CCC = 106.5(12)°, F_aSF_e = 90.5(15)° and F_eSF_e = 87.7(29)°. Vibrational amplitudes for long non-bonded CF and FF distances indicate a high barrier to pseudorotation of the ring.     

X-ray study of the hetero ring flexibility in trans-5,6- trimethylene- and tetramethylene-5,6-dihydro 2-phenyl-[4H]-1,3-thiazines

The structures to two 1,3-thiazine derivatives differing only in the number of CH₂ groups in their trans fused hydrocarbon ring (_n = 3 for I and n = 4 for II) have been established by X-ray crystallography from diffractometer data. Crystals of I (trans-5,6- trimethylene-5,6-dihydro-2-phenyl-[4H] - 1,3-thiazine) are triclinic, space group P with a = 7.661(1), b = 8.282(1), c = 9.566(2) Å, = 91.75(1), β = 100.72(1), γ = 105.45(1)° Z = 2, D_c = 1.260 g cm^-3. Crystals of II (trans-5,6-tetramethylene-5,6-dihydro-2-phenyl [4H]-1,3-thiazine) are monoclinic, space group P2₁/c with a = 7.914(2), b = 19.362(13), c = 8.440(1) Å, β = 109.16(2)°C Z = 4, D_c = 1.258 g cm^-3. The structures determined by Patterson (I) and direct (II) methods were refined to R = 0.050 for 1330 reflections of I and R = 0.082 for 1012 reflections of II. The proper treatment of the positional disorder of the carbon atoms (C(5) and C(6)) forming the trans ring junction in I discovered two discrete conformations with a ratio of 1:2. The opposite chirality of atoms C(51) and C(52), and C(61) and C(62), indicates a simultaneous configurational disorder with a pattern of total disorder: A A . The puckering parameters of the hetero rings in the same enantiomers of molecules IA, IB and II indicate a connection between the conformers: ⁵E(II)→⁵H₆(IB)→E₆IA) via pseudorotation. Their relationship is discussed and compared with the conformational freedom of the analogous 1,3-oxazine derivatives.     

Formation of bacteriochlorophyll a coordination states under external high-pressure

The pressure-dependencies up to 1100 MPa of the Q_y, Q_x, and Soret absorption bands for five- and six-coordinate monomeric complexes of bacteriochlorophyll a (Bchl a) in the solutions have been measured and quantitatively analysed. Here we show that the dependencies of the six-coordinate complexes can be accounted for within semiclassical theories, and the additional pressure-shifts in the dependencies of the five-coordinate complexes are caused by the Mg–O sixth axial ligand formation. Thereby the decrease of the Q_x and Soret transitions energies, induced by the Mg–O bond, have been estimated.     

Synthesis, spectroscopic and thermal studies of the reactions of the donors piperazine and N,N′-dimethylpiperazine with σ- and π-acceptors

The interactions of the electron donors piperazine (PIP) and N,N′-dimethylpiperazine (DMPIP) with the σ-acceptor iodine and the π-acceptors tetracyanoethylene (TCNE) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) were studied spectrophotometrically in chloroform at 25 °C. The electronic and infrared spectra of the resulting charge-transfer complexes were recorded, in addition to thermal analysis. The results obtained showed that the stoichiometries of the reactions are not fixed and depend on the nature of both the donor and the acceptor. The formed CT-complexes have the formulas of , [(PIP)(TCNE)₂], [(PIP)(DDQ)₂], , [(DMPIP)(TCNE)₂] and [(DMPIP)(DDQ)₂]. A general mechanism explaining the formation of triiodide complexes was suggested.     

Crystal structure, phase transition and thermal behaviour of dabcodiium hexaaquacopper(II) bis(sulfate), (C6H14N2)[Cu(H2O)6](SO4)2

A new organically templated metal sulfate has been synthesized and characterized. At room temperature, dabcodiium hexaaquacopper(II) bis(sulfate), (C₆H₁₄N₂)[Cu(H₂O)₆](SO₄)₂ crystallizes in the monoclinic symmetry (space group P2₁/n) with the following unit cell parameters: a = 6.9533(2), b = 12.5568(2), c = 9.9434(2) Å; β = 90.526(1)° and Z = 2. Its crystal structure is built from isolated [Cu(H₂O)₆]²⁺, and disordered ions linked together by a hydrogen-bonding network. The title compound undergoes a reversible phase transition of the first-order type at 265.7/281.8 K on heating–cooling runs. Below the phase transition temperature, the structure is fully ordered.     

X-ray investigation of the nematic and reentrant nematic phases of N-[(4-n-octyloxybenzoyloxy)-salicilidene]-4'-cyanoaniline

We have performed an X-ray scattering study of the nematic-smectic A and reentrant nematic-smectic A phase transitions in N-[(4-n-octyloxybenzoyloxy)-salicilidene]-4'-cyanoaniline (OOBOSCA). A diffractometer with a linear position sensitive detector was used. The results show that the smectic phase in OOBOSCA is of the A_d type with an interlayer spacing incommensurate with the molecular length L; d ∽ 1·2L. In the reentrant nematic phase two types of fluctuation modes were found. One of them corresponds to the monolayer wavevector q₁ ∽ 2π/L, and the other is due to the partial bilayer fluctuations with the wavevector q₂ ∽ 0·8q₁. The temperature dependences of the interlayer spacing, X-ray scattering intensity and longitudinal correlation length for both types of layering in the reentrant nematic phase are presented. The change of the fluctuation regime from S_Ad, to S_Cd type with decreasing temperature in the reentrant nematic phase of OOBOSCA was found. The results are discussed on the basis of models with competing order parameters. The influence of alkyl chain flexibility on the stability of a partial bilayer smectic phase is also considered.     

单个金或银原子掺杂的氧化钒团簇上的甲烷活化反应

运用密度泛函理论系统研究了甲烷在MV_3O_y~q (M=Au/Ag,y=6–8,q=0或±1)团簇上的吸附和活化。研究得到了吸附体系的微观几何构型、吸附能、电荷分布等性质,找到了5个可以明显活化甲烷分子的含Au团簇。在这些体系中,Au均吸附在基底团簇V_3O_y~q的O位置,而CH_4均在Au原子上被活化。团簇电荷对活化能力有明显影响,阳离子团簇的活化能力最强,中性体系次之,阴离子团簇的活化能力很弱。测试计算表明引入D3色散矫正对于体系结构和能量的计算结果影响不大。本文作为单原子催化剂上甲烷吸附和活化反应的团簇模型研究,为进一步研究单原子催化剂上甲烷的活化机理提供了基础,也为合理设计低温下甲烷转化的单原子催化剂提供了有益的线索。     

Hydrothermal synthesis and intercalation behavior of a layered titanium phosphate Ti2(H2PO4)(HPO4)(PO4)2 · 0.5C6N2H16, with an extended γ-phase intercalated into organic amine

With a hydrothermal technique, a layered titanium phosphate with the formula Ti₂(H₂PO₄)(HPO₄)(PO₄)₂ · 0.5C₆N₂H₁₆ (denoted TP-J2) has been prepared by treating the Ti/H₃PO₄/H₂O/1-methylpiperazine system directly. The as-synthesized products were characterized by powder X-ray diffraction, CP-MAS solid-state ³¹P NMR spectroscopy, thermogravimetric and differential thermal analyses (TG-DTA). The structure was solved by single-crystal X-ray diffraction analysis and it presents an extended γ-phase intercalated with organic amine. Crystal data: triclinic, , a = 8.106 (2) Å, b = 8.197 (2) Å, c = 11.658 (2) Å.  = 78.32 (3)°, β = 80.85 (3)°, γ = 77.90 (3)°, Z = 2. Additionally, the intercalation behavior of TP-J2 with n-alkyl monoamine (n = 2, 3, 4, 6, 8, 10 and 12) was investigated. Owing to the strong brønsted base, N,N′-dimethylpiperazine, resides in the interlayer, it presented unusual features of TP-J2 in contrast with that of γ-Tip.