A Mixed Retention Model of Reversed Phase HPLC

The retention behavior of solutes in reversed phase chromatographic system, especially containing hydrophobic ions in mobile phase, has been studied by many authors, but the silanol effect on alkyl-modified silica surface was neglected. Actually, because of stereo hindrance, numerous unreacted (residual) silanol groups, which can interact with some solutes, are left within the bonded phase after the silica surface has be modified. A mixed retention model, which considers adsorbed hydrophobic ions on the bonded phase can decrease the hydrophobicity and mask residual silanol groups, is proposed, based on hydrophobic distribution of neutral solutes, ion-pair distribution of ionic solutes and coulombic attraction between cationic solutes and the dissociated silanols.     

Length-controlled rodlike self-assemblies in binary mixed langmuir-blodgett monolayers on mica

In this paper, atomic force microscopy (AFM) has been used to investigate the morphology of monolayers of the amphiphilic rod-coil diblock molecule (EO7OPV) containing oligo(phenylene vinylene) dimer (OPV) and poly(ethylene oxide) (PEO) as well as the morphology of mixed monolayers of EO7OPV and palmitic acid (PA) deposited onto mica by the Langmuir-Blodgett technique. At surface pressures higher than 3 mN/m, EO7OPV forms regular-shaped aggregates with a monomolecular layer structure, where the hydrophilic PEO blocks are adsorbed onto the mica substrate and the hydrophobic OPV blocks form an ordered crystalline OPV layer on the top of the PEO layer through the strong pi-pi stacking interaction. In the mixed LB monolayers of EO7OPV and PA, the phase separation occurs. At a certain mixed ratio, EO7OPV molecules form rodlike domains with regular shape and uniform size at surface pressures higher than 3 mN/m. With the increase of the molar fraction of PA, the rodlike domains consisting of EO7OPV are elongated. The length of the rodlike domains can be tuned easily in a large range by altering the molar ratio of EO7OPV and PA. In addition, the rodlike domains are oriented to specific directions, corresponding to the directions of the potassium ion array on the mica surface having 6-fold symmetry. We demonstrate the possible formation mechanism and the elongation origin of rodlike domains in mixed LB monolayers and propose the two-step formation process of oriented rodlike domains deposited onto the mica substrate.     

Influence of hydrophobic alkylated gold nanoparticles on the phase behavior of monolayers of DPPC and clinical lung surfactant

The effect of hydrophobic alkylated gold nanoparticles (Au NPs) on the phase behavior and structure of Langmuir monolayers of dipalmitoylphosphatidylcholine (DPPC) and Survanta, a naturally derived commercial pulmonary surfactant that contains DPPC as the main lipid component and hydrophobic surfactant proteins SP-B and SP-C, has been investigated in connection with the potential implication of inorganic NPs in pulmonary surfactant dysfunction. Hexadecanethiolate-capped Au NPs (C(16)SAu NPs) with an average core diameter of 2 nm have been incorporated into DPPC monolayers in concentrations ranging from 0.1 to 0.5 mol %. Concentrations of up to 0.2 mol % in DPPC and 16 wt % in Survanta do not affect the monolayer phase behavior at 20 °C, as evidenced by surface pressure-area (π-A) and ellipsometric isotherms. The monolayer structure at the air/water interface was imaged as a function of the surface pressure by Brewster angle microscopy (BAM). In the liquid-expanded/liquid-condensed phase coexistence region of DPPC, the presence of 0.2 mol % C(16)SAu NPs causes the formation of many small, circular, condensed lipid domains, in contrast to the characteristic larger multilobes formed by pure lipid. Condensed domains of similar size and shape to those of DPPC with 0.2 mol % C(16)SAu NPs are formed by compressing Survanta, and these are not affected by the C(16)SAu NPs. Atomic force microscopy images of Langmuir-Schaefer-deposited films support the BAM observations and reveal, moreover, that at high surface pressures (i.e., 35 and 45 mN m(-1)) the C(16)SAu NPs form honeycomb-like aggregates around the polygonal condensed DPPC domains. In the Survanta monolayers, the C(16)SAu NPs were found to accumulate together with the proteins in the liquid-expanded phase around the circular condensed lipid domains. In conclusion, the presence of hydrophobic C(16)SAu NPs in amounts that do not influence the π-A isotherm alters the nucleation, growth, and morphology of the condensed domains in monolayers of DPPC but not of those of Survanta. Systematic investigations of the effect of the interaction of chemically defined NPs with the lipid and protein components of lung surfactant on the physicochemical properties of surfactant films are pertinent to understanding how inhaled NPs impact pulmonary function.     

INFLUENCE OF pH AND PRESENCE OF Cu2+ IONS ON THE PROPERTIES OF POLYACRYLOYLACETONE (PAA)MONOLAYERS

The influence of pH on the properties of polyacryloylacetone (PAA) monolayers at air/water interface was examined by using surface pressure-area isotherm measurement,a new rheological approach and AFM imaging. The isotherms and AFM-imaging detect phase transitions in PAA monolayers and growth of microdomains during compression in the case of pH 6.6 and missing of such kind of structures at pH 9. The rheological study below and above the phase transition shows an existence of a large relaxation time related to the process of formation of microdomains.

The influence of divalent ions on the properties of a PAA monolayer was studied. The presence of Cu²⁺ ions leads to polymer - ion interaction which results in the formation of microdomains.     

Effect of the topography of silver films on the structure of surface ensembles of 11-mercaptoundecanol

The effect of the topography of the silver surface on the formation of self-assembling monolayers of 11-mercaptoundecanol was examined. The metal surface was modified by nitric acid in the presence of hydrogen peroxide (deep etching (DE)) or aqueous malononitrile (chemical polishing (PE)). The adsorption properties of the monolayers differ significantly for the DE and PE surfaces and are a function of the ratio of functional hydroxyl groups available for reaction with analyte and hydrophobic segments of the hydrocarbon chain of the molecule. A correlation between the amount of adsorption and the analyte acidity was demonstrated. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 45, No. 2, pp. 98-103, March-April, 2009.     

Interaction of the glycoalkaloid tomatine with DMPC and sterol monolayers studied by surface pressure measurements and Brewster angle microscopy

The interaction of the glycoalkaloid tomatine with monolayers of dimyristoylphosphatidylcholine (DMPC) and cholesterol, as well as other selected sterols, has been investigated using surface pressure measurements at constant area and Brewster angle microscopy (BAM). The interaction of tomatine with sterol monolayers is found to vary with the structure of the sterol. The interaction of tomatine with cholesterol-containing monolayers results in a surface pressure increase accompanied by the appearance of a mottled texture. Morphological changes are observed that suggest the formation of tomatine-cholesterol complexes that aggregate at the water-air interface. No morphology change observable by BAM is observed for monolayers containing epicholesterol, suggesting that the stereochemistry of hydrogen bonding between the sterol and the sugar units on tomatine is of particular significance. Strong interactions are observed with cholestanol- and coprostanol-containing monolayers, and BAM reveals formation of spiked aggregates upon interaction with 7:3 mole ratio DMPC/coprostanol mixed monolayers. More modest surface pressure changes are observed for cholestenone- and epicoprostanol-containing monolayers. A much smaller surface pressure increase is observed when tomatine is injected beneath a pure DMPC monolayer.     

Examining the frictional forces between mixed hydrophobic-hydrophilic alkylsilane monolayers

Monolayers presenting methyl-terminated (hydrophobic) and hydroxyl-terminated (hydrophilic) surfaces on silica have been studied by molecular dynamics simulation and the effects of hydrogen bonding, chain length, and chain mixing on the frictional properties determined. The hydroxyl-terminated monolayers were found to show large adhesion zones as a result of strong interfacial interlayer hydrogen bonds; the interfacial sliding forces observed in the hydroxyl-terminated monolayers being one order of magnitude higher than the interfacial forces for the hydrophobic surfaces at the characteristic point of zero-load. Mixed hydroxyl- and methyl-terminated monolayers of equal length were found to exhibit intermediate shear stress values between those observed for pure monolayers, with the magnitude of the shear stress depending on the surface content of the hydroxyl-terminated chains. For mixed monolayers of unequal chain lengths, at high loads a maximum in the magnitude of the shear stress as a function of the length of the methyl-terminated chain was observed due to the creation of a buffer zone between the hydroxyl-terminated chains that produces strong hydrogen-bonding interactions. The effect of a constant normal load or constant separation simulation ensemble on the results has also been studied and in general found to have minimal influence on the observed behavior, although some differences are observed for the shear stress at intermediate normal loads due to the formation of stronger hydrogen bond networks at constant load compared to constant separation.     

Unique rodlike surface morphologies in trisilanolcyclohexyl polyhedral oligomeric silsesquioxane films

A trisilanol derivative of polyhedral oligomeric silsesquioxane (POSS), trisilanolisobutyl-POSS, has recently been reported to form stable monolayers at the air/water interface. This paper explores the mono- and multilayer properties of another POSS derivative, trisilanolcyclohexyl-POSS, with pi-A isotherm and Brewster angle microscopy measurements. Results show that with continuously increasing surface concentration via symmetrical compression, trisilanolcyclohexyl-POSS amphiphiles at the air/water interface undergo a series of phase transitions from traditional Langmuir monolayers (one-POSS-molecule thick) to unique rodlike hydrophobic aggregates in multilayer films (approximately eight-POSS-molecules thick) that are dramatically different from "collapsed" morphologies seen in other systems. Stable and hydrophobic rodlike structure formation on water is presumably due to trisilanolcyclohexyl-POSS' unique molecular structure and strong tendency to form intermolecular hydrogen bonds in the solid state. This result is consistent with existing POSS/polymer composite research, which shows that POSS molecules tend to aggregate and crystallize into lamellar nanocrystals.     

Self-assembled monolayers of alkylphosphonic acid on GaN substrates

In this paper we describe the formation and characterization of self-assembled monolayers of octadecylphosphonic acid (ODPA) on epitaxial (0001) GaN films on sapphire. By immersing the substrate in its toluene solution, ODPA strongly adsorbed onto UV/O 3-treated GaN to give a hydrophobic surface. Spectroscopic ellipsometry verified the formation of a well-packed monolayer of ODPA on the GaN substrate. In contrast, adsorption of other primarily substituted hydrocarbons (C n H 2 n+1 X; n = 16-18; X = -COOH, -NH 2, -SH, and -OH) offered less hydrophobic surfaces, reflecting their weaker interaction with the GaN substrate surfaces. A UV/O 3-treated N-polar GaN had a high affinity to the -COOH group in addition to ODPA, possibly reflecting the basic properties of the surface. These observations suggested that the molecular adsorption was primarily based on hydrogen bond interactions between the surface oxide layer on the GaN substrate and the polar functional groups of the molecules. The as-prepared ODPA monolayers were desorbed from the GaN substrates by soaking in an aqueous solution, particularly in a basic solution. However, ODPA monolayers heated at 160 degrees C exhibited suppressed desorption in acidic and neutral aqueous solution maybe due to covalent bond formation between ODPA and the surface. X-ray photoelectron spectroscopy provided insight into the effect of the UV/O 3 treatment on the surface composition of the GaN substrate and also the ODPA monolayer formation. These results demonstrate that the surface of a GaN substrate can be tailored with organic molecules having an alkylphosphonic acid moiety for future sensor and device applications.     

A monolayer study on interactions of docetaxel with model lipid membranes

Docetaxel (DCT) is an antineoplastic drug for the treatment of a wide spectrum of cancers. DCT surface properties as well as miscibility studies with l-alpha-dipalmitoyl phosphatidylcholine (DPPC), which constitutes the main component of biological membranes, are comprehensively described in this contribution. Penetration studies have revealed that when DCT is injected under DPPC monolayers compressed to different surface pressures, it penetrates into the lipid monolayer promoting an increase in the surface pressure. DCT is a surface active molecule able to decrease the surface tension of water and to form insoluble films when spread on aqueous subphases. The maximum surface pressure reached after compression of a DCT Langmuir film was 13 mN/m. Miscibility of DPPC and DCT in Langmuir films has been studied by means of thermodynamic properties as well as by Brewster angle microscopy (BAM) analysis of the mixed films at the air-water interface, concluding that DPPC and DCT are miscible and they form non-ideally mixed monolayers at the air-water interface. Helmholtz energies of mixing revealed that no phase separation occurs. In addition, Helmholtz energies of mixing become more negative with decreasing areas per molecule, which suggests that the stability of the mixed monolayers increases as the monolayers become more condensed. Compressibility values together with BAM images indicate that DCT has a fluidizing effect on DPPC monolayers.     

有机铵盐对FC-SAA表面活性及溶度的影响

测定了一系列有机铵盐与一种全氟烷磺酸盐１：１混合体系水 溶液的表面张力，由此研究有机铵盐对碳氟表面活性剂表面活性及溶度的影响，导出应用于此种混合体系的Ｇｉｂｂｓ吸附公式，并讨论了混合体系中两表面活性组分的表面分子相互作用和表面层的结构。     

Molecular Recognition by Cyclophane/Guanidinium Supramolecular Receptor Embedded at the Air-Water Interface

In order to develop a supramolecular receptor through a self-assembling process, a site-specific host and an inclusion-type host were mixed as a Langmuir monolayer, and guest binding and pressure-induced fluorescence emission were investigated. A guanidinium amphiphile and several cyclophanes carrying hydrophobic moieties were used as the host molecules; molecular recognition of an aqueous fluorescent guest, 6-p-toluidino-2-naphthalenesulfonic acid (TNS) by binary mixed receptor monolayers was evaluated by a surface pressure-molecular area (π-A) isotherm and a surface fluorescence measurement. An apparent increase in fluorescence intensity was observed when the mixed monolayers of the guanidinium and cyclophane amphiphiles were compressed on an aqueous TNS solution. In contrast, single-component monolayers of the guanidinium or the cyclophane did not show a significant increase in fluorescence emission. In the mixed monolayers, the guest TNS would be bound to the interface by strong electrostatic interaction with the guanidinium, and inclusion of the formed complex probably suppresses the quenching effect in polar medium and/or self-quenching. Experiments with various mixing ratios of these components suggest selective formation of an equimolar cooperative receptor of the guanidinium and the cyclophane. Investigation of the cyclophane structures by fluorescence emission and a competitive binding experiment with another guest were also carried out.     

The relationship between nanobubbles and the hydrophobic force

The formation of nanobubbles on hydrophobic self-assembled monolayers has been examined in a binary ethanol/water titration using small angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The AFM data demonstrates a localized force effect attributed to nanobubbles on an immersed hydrophobic surface. This evidence is arguably compromised by the possibility that the AFM tip actually nucleates nanobubbles. As a complementary noninvasive technique, SAXS has been used to investigate the interfacial region of the immersed hydrophobic surface. SAXS measurements reveal an electron density depletion layer at the hydrophobic interface, with changing air solubility in the immersing liquid, due to the formation of nanobubbles.     

Thermodynamic and Fluorescence Studies on the Interaction of Cholesterol with Palmitoyl-Oleoyl Phosphatidylcholine and Sphingomyelin

Studies on the interaction of cholesterol (CHOL) with palmitoyl-oleoyl phosphatidylcholine (POPC) and sphingomyelin (SPM) are considered to be important because of the occurrence of strong interactions between sphingolipids and CHOL, which lead to the formation of microdomains or rafts within biological membranes. In the present investigation, studies on the surface pressure (π)-area ( A ) measurements and fluorescence microscopic studies on monolayers of the above mentioned system have been reported. Ideality/nonideality of mixing, excess area, and free energy changes during the formation of the monolayers at different surface pressures for the mixed lipid systems were evaluated from the π– A data. Interactions were found to be repulsive at lower CHOL content, which became associative at higher CHOL content. Condensing effects of CHOL on the mixed monolayers were found. Fluorescence studies on the systems revealed similar overall results.     

季铵盐型双子表面活性剂与十八醇的混合单分子膜

研究了双子表面活性剂12-2-16和12-2-12分别与十八醇(C18H37OH)在空气-水界面上混合单分子膜的π-A等温线. 在相分离表面压以下, 比较了不同表面压下和不同混合比单分子膜的混合表面过剩自由能ΔGMexo, 分析了双子表面活性剂与脂肪醇在空气-水界面上混合膜中的相容性. 结果表明, 12-2-16与C18H37OH在所有混合摩尔比下随着表面压增高, 自由能增大. 12-2-12与C18H37OH混合膜体系的相容性取决于两者的混合比, ΔGMexo随所加入C18H37OH摩尔分数的增加逐渐增大, 从异种分子间净的吸引作用转变到相互排斥作用体系, 转变点为C18H37OH加入量的摩尔分数0.65. 当混合为热力学自发过程时, 增大表面压将有利于混合; 而对相互排斥体系, 增加表面压将使体系内异种分子之间的相互排斥作用更大.     

Evidence of domain formation in cardiolipin-glycerophospholipid mixed monolayers. A thermodynamic and AFM study

The interaction of the three main components of the mitochondrial membrane, namely cardiolipin, phosphatidylcholine, and phosphatidylethanolamine, has been studied investigating mixed cardiolipin-phosphatidylcholine and cardiolipin-phosphatidylethanolamine monolayers at different cardiolipin molar fractions. The thermodynamic behavior of the mixed monolayers was investigated by means of surface pressure and surface potential measurements, and atomic force microscopy was employed to characterize the morphology of the monolayers. Langmuir isotherms and surface potential curves show a regular behavior with a progressive transition toward the isotherm of the pure component. Positive deviations from ideality in the excess Gibbs energies of mixing suggest the presence of repulsive interactions in both systems. Analysis of partial molecular dipole moment indicates a discontinuity at a definite cardiolipin/phosphatidylethanolamine molar fraction, suggesting the formation of a stoichiometric complex; as a consequence, in mixed cardiolipin-phosphatidylethanolamine monolayers, a phase separation is observed at phosphatidylethanolamine excess. AFM measurements indicate the presence of two domains: one made by phosphatidylethanolamine and the other by a regular arrangement of phosphatidylethanolamine and cardiolipin at a fixed molecular ratio.     

Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Interaction of an organic cation with Gibbs monolayers of n-hexadecyl phosphate

Surface phase behavior of n-hexadecyl phosphate (n-HDP) and its mixture with L-arginine (L-arg), which behaves as L-argininium cation (L-arg(+)) in aqueous solution, at a molar ratio 2:3 in Gibbs adsorption layers has been studied by film balance, Brewster angle microscopy (BAM) and surface tensiometry at 20 degrees C. The monolayers of n-HDP show three phases that are gas (G), intermediate (I) and liquid condensed (LC), and two phase transitions. A first-order G-I phase transition that is followed by a second-order I-LC phase transition is found in these monolayers. Although the monolayers of the mixtures containing n-HDP and L-arg show three phases, the nature of the middle phase is different from that of the n-HDP monolayers. The three phases observed for the mixed systems are G, liquid expanded (LE) and LC phases. A first-order G-LE phase transition is found at a low surface pressure at > or =10 degrees C. This transition is followed by another first-order LE-LC phase transition at a certain higher surface pressure. The first-order nature of the phase transitions for both the systems is confirmed by the presence of plateaus in the pi-t curves, which are accompanied by two surface phases. A second-order phase transition in the monolayers of n-HDP is indicated by a gradual change in the surface morphology, from a uniformly bright isotropic to an anisotropic mosaic textured phase, which is accompanied by a continuous change in the surface pressure. The domains formed during the first-order phase transition in the adsorption layers of n-HDP are circular and remain unaffected by changing the temperature. Although the domains of an LE phase are circular, those of an LC phase at the latter transition are fractal in the mixed system. A further branching of the arms of the fractal domains is found to occur by an increase in the temperature. All the results are explained by considering salt formation between anion from n-HDP and L-arg(+).     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

十二烷基三甲基溴化铵在聚苯乙烯胶乳粒子上的吸附

实验测得C~1~2TAB在PS胶乳粒子表面的吸附等温线呈L型的二阶段吸附特征,这表明初始的C~1~2TA^+离子是将其季铵正电性头基吸引在PS链的负电性硫酸根端基上,并将碳氢链通过疏水相互作用吸附在PS链上。结合光子相关谱测得胶乳粒子流体力学半径R~H的变化,表明第I阶段围绕着这些初始吸附位的聚集吸附,产生平均聚集数为4.0的松散小聚集体,此时对应的浓度c/cmc=0.32是文献通常所指的临界表面胶团浓度csmc。其后的进一步聚集吸附最终生成了附着在PS链端基处且平均聚集数为19.5的球形吸附胶团。这一饱和吸附的结果增加了胶乳粒子在水溶液中的分散稳定性。