Construction of albumin multilayer coating onto plasma treated poly(vinyl chloride) via electrostatic self‐assembly

Multilayer films consisting of polyethylenimine (PEI) and albumin were successffully prepared on plasma treated poly(vinyl chloride) (PVC) via electrostatic self‐assembly of the PEI and albumin. The layer‐by‐layer assembly of the PEI/albumin on plasma treated PVC was monitored by contact angle and ¹²⁵I radiolabeled method. The stability of the mutilayer coating was determined by ¹²⁵I radiolabeled method. The results revealed that less than 10% albumin was eluted by a phosphate buffered saline (PBS) solution in 45 days. The static platelet adhesion indicated that the PEI/albumin deposited PVC could resist the platelet adhesion effectively. Such an easy processing and shape‐independent method may have good potential for surface modification of cardiovascular device. Copyright © 2004 John Wiley & Sons, Ltd.     

Protein nanotubes comprised of an alternate layer-by-layer assembly using a polycation as an electrostatic glue

We present the synthesis and structure of various protein nanotubes comprised of an alternate layer-by-layer (LbL) assembly using a polycation as an electrostatic glue. The nanotubes were fabricated by sequential LbL depositions of positively charged polycations and negatively charged proteins into a porous polycarbonate (PC) membrane, followed by release of the cylindrical core by quick dissolution of the template with CH(2)Cl(2). This procedure provides a variety of protein nanotubes without interlayer cross-linking. The three-cycle depositions of poly-L-arginine (PLA) and human serum albumin (HSA, M(w)=66.5 kDa) into the porous PC template (pore diameter, D(p)=400 nm) yielded well-defined (PLA/HSA)(3) nanotubes with an outer diameter of 419+/-29 nm and a wall thickness of 46+/-8 nm, revealed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. The outer diameter of the tubules can be controlled by the pore size of the template (200-800 nm), whereas the wall thickness is always constant, independent of the D(p) value. The (PEI/HSA)(3) (PEI: polyethylenimine) nanotubes showed a slightly thin wall of 39+/-5 nm. CD spectra of the multilayered (PEI/HSA)(n) film on a flat quartz plate suggested that the secondary structure of HSA between the polycations was almost the same as that in aqueous solution. The three-cycle LbL depositions of PLA and ferritin (M(w)=460 kDa) or myoglobin (Mb, M(w)=1.7 kDa) into the porous PC membrane also gave cylindrical hollow structures. The wall thickness of the (PLA/ferritin)(3) and (PLA/Mb)(3) nanotubes were 55+/-5 nm and 31+/-4 nm; it depends on the globular size of the protein (ferritin>HSA>Mb). The individual ferritin molecule was clearly seen in the tubular walls by SEM and TEM measurements.     

Preparation and characterization of an anionic dye-polycation molecular films by electrostatic layer-by-layer adsorption process

This communication reports the formation and characterization of self-assembled films of a low molecular weight anionic dye amaranth and polycation poly(allylamine hydrochloride) (PAH) by electrostatic alternating layer-by-layer (LBL) adsorption. It was observed that there was almost no material loss occurred during adsorption process. The UV-vis absorption and fluorescence spectra of amaranth solution reveal that with the increase in amaranth concentration in solution, the aggregated species starts to dominate over the monomeric species. New aggregated band at 600 nm was observed in amaranth-PAH mixture solution absorption spectrum. A new broad low intense band at the longer wavelength region, in the amaranth-PAH mixture solution fluorescence spectrum was observed due to the closer association of amaranth molecule while tagged into the polymer backbone of PAH and consequent formation of aggregates. The broad band system in the 650-750 nm region in the fluorescence spectra of different layered LBL films changes in intensity distribution among various bands within itself, with changing layer number and at 10 bilayer LBL films the longer wavelength band at 710 nm becomes prominent. Existence of dimeric or higher order n-meric species in the LBL films was confirmed by excitation spectroscopic studies. Almost 45 min was required to complete the interaction between amaranth and PAH molecules in the one-bilayer LBL film.     

The investigation of the behavior of a long period grating sensor with a copper sensitive coating fabricated by layer-by-layer electrostatic adsorption

Sensors based on changes of refractive index in response to sorption of an analyte on the coating or film of a long period grating fiber (LPG) fiber have recently been reported. In most prior work the coating or film swelled during interaction with the analyte. The swelling mechanism produced a kinetic response that slowed both the sensor's time for steady-state measurement and the reversibility of the sensor. Here, the analytical utility of fabricating these nanometer thin films using the layer-by-layer (LBL) electrostatic assembly method is evaluated using Cu^II as the test analyte and Cibacron Blue as the reagent immobilized in the LBL assembly; a generation-4 poly(amidoamine) dendrimer served as the spacer in the assembly. Detection of 1.3 mg Cu^II L⁻¹ was observed when six bilayers comprised the coating. The stable response was achieved with 0.6 mg L⁻¹ in less than 1 min. When 0.1 M HCl was used as the rinsing solution, this LPG sensor was reversible and the signal to similar concentrations of Cu^II reproducible.     

Hydroxyapatite coating on stainless steel pre-coated with bovine serum albumin at ambient conditions

A biomimetic process for coating of nanosized hydroxyapatite on stainless steel, which capitalises the dual nature of the protein bovine serum albumin in both metal binding and a strong affinity for calcium ions, has been developed. The novelty of the process lies in pre-conditioning the metallic surface using the above protein prior to its mineralization with hydroxyapatite at ambient conditions. The microporous morphology of these coatings may provide favourable solubility and resorbability as desired by many orthopaedic and orthodontic applications.     

Hydrolysis and grafting of dimethylalkoxysilanes onto stainless steel

The grafting of trialkoxysilane molecules should also give rise to the formation of a siloxane network at the substrate's surface when trialkoxysilanes are used. Other candidates that might be able to act as adhesion promoters at metallic surfaces are dimethylalkoxysilanes. The advantage of dimethylalkoxysilanes is that only one silanol group is produced during the hydrolysis step, leading to the formation of a grafted monolayer onto the steel. Moreover, the chemical grafting of stainless steel, which exhibits a low surface reactivity, is of great interest for industrial applications such as adhesive bonding or coatings. The objective of this work was to chemically graft dimethylalkoxysilanes onto AISI 316L stainless steel and to analyze the grafted layer by X‐ray photoelectron spectroscopy (XPS). Investigation of the hydrolysis of these molecules in aqueous solutions was also performed by proton nuclear magnetic resonance spectroscopy (¹H NMR). The grafting of 3‐(ethoxydimethylsilyl)propylamine (APDES) and 3‐glycidoxypropyldimethylethoxysilane (GPDES) was achieved onto stainless steel after a controlled hydrolysis reaction. A pH inferior or equal to 5 was necessary to obtain a sufficient hydrolysis of silanes. XPS results have evidenced the grafting of the silanes onto stainless steel. The signal of the Si 2p peak clearly showed the formation of a covalent bond between APDES and the stainless steel surface through the O atoms giving rise to a uniform layer of adsorbed molecules. Moreover, this grafted layer is strongly stable as no removal of the alkoxysilane was observed after immersion in hot water which is very critical for these molecules. Copyright © 2015 John Wiley & Sons, Ltd.     

A careful examination of the adsorption step in the alternate layer-by-layer assembly of linear polyanion and polycation

In order to elaborate alternate layer-by-layer assembly as a means to prepare ultrathin films, details of conventional polyion assemblies have been quantitatively analyzed by quartz crystal microbalance (QCM) technique with the aid of scanning electron microscopy (SEM) and atomic force microscopy (AFM). The alternate adsorption of poly(styrenesulfonate) (PSS) and poly(allylamine) (PAM) onto oppositely-charged surfaces displayed the pseudo first-order kinetics and was saturated within 10–20 min at pH 3 and 22°C. It was revealed that drying at every step increased the thickness of adsorbed films due to enhanced surface roughness of the films. Therefore, frequent drying is not profitable for preparing films in a good quality. Non-contact AFM observation revealed that drying of the film with nitrogen stream, forced polymer chains to align to one direction with increasing surface roughness. In contrast, water washing between the consecutive adsorptions was effective for successful alternate adsorption. About 10% of an adsorbed polyion layer was removed by 5-min water washing probably due to removal of the loosely-attached materials.     

Contribution of acidic amino residues to the adsorption of peptides onto a stainless steel surface

The role of the acidic amino acid residues in the adsorption of peptides/proteins onto stainless steel particles was investigated using a peptide fragment from bovine beta-lactoglobulin, Thr-Pro-Glu-Val-Asp-Asp-Glu-Ala-Leu-Glu-Lys (T5 peptide), which has a high affinity to a stainless steel surface at acidic pHs, and its mutant peptides substituted with different numbers of acidic amino acid residues. The adsorption behavior of the mutant peptides as well as the T5 peptide were studied at pH 3 with respect to concentration and ionic strength dependencies and the reversibility of the adsorption process. The behavior of the peptides was generally characterized as two distinct irreversible adsorption modes, Mode I and Mode II. In Mode I, the amounts adsorbed lay on the ordinate at zero equilibrium concentration in the solution, while in Mode II, the amount adsorbed increased with increased equilibrium concentration. The area occupied by the peptides was predicted by molecular mechanics and molecular dynamics. The state of the peptides, when adsorbed, was investigated using FT-IR analysis. The FT-IR analyses revealed that the side carboxylic groups of the peptides adsorbed on the stainless steel surface were ionized, while they were unionized in the solution at pH 3. Thus, the interactions between the carboxylic groups of the peptide and the stainless steel surface can be considered to be largely electrostatic. The peptide having four acidic amino acid residues took a maximum adsorbed amount, the reason for which is discussed.     

DNA and polylysine adsorption and multilayer construction onto cationic lipid-coated microbubbles

We report on a novel application of the layer-by-layer (LbL) assembly technique to attach multiple layers of DNA and poly-l-lysine (PLL) onto preformed lipid-coated microbubbles to increase the DNA loading capacity. We first measured the effects of the cationic lipid fraction and salt concentration on the microbubble stability. Microbubble production and stability were robust up to a cationic lipid fraction of 40 mol % in 10 mM NaCl. DNA adsorption was heterogeneous over the microbubble shell and occurred primarily on the condensed phase domains. The amount of adsorbed DNA, and subsequently adsorbed PLL, increased linearly with the fraction of cationic lipid in the shell. DNA loading was further enhanced by the LbL assembly method to construct polyelectrolyte multilayers (PEMs) of DNA and PLL. PEM buildup was demonstrated by experimental results from zeta potential analysis, fluorescence microscopy, UV spectroscopy, and flow cytometry. The PEMs exhibited two growth stages and were heterogeneously distributed over the microbubble surface. The DNA loading capacity onto the microbubbles was enhanced by over 10-fold by using five paired layers. However, the PEM shell did not prevent oscillation or destruction during ultrasound insonification. These results suggest that the surface can be compartmentalized to make multifunctional, high-payload ultrasound contrast agents for targeted gene therapy.     

Bovine serum albumin adsorption onto 316L stainless steel and alumina: a comparative study using depletion,protein radiolabeling,quartz crystal microbalance and atomic force microscopy

The importance of protein adsorption on biomaterials is widely recognized, but the dependence of the adsorption results on the chosen technique has not been much addressed. The objective of this work is to compare adsorption data obtained using several techniques under experimental conditions as closely as possible. Two case studies were investigated: adsorption of bovine serum albumin (BSA) onto 316L stainless steel (SS) and onto alumina. Both materials were used as powders and plates, whose characterization was done through zeta potential (ZP) measurements. The experimental techniques were depletion, protein radiolabeling, quartz crystal microbalance with dissipation (QCM‐D) and atomic force microscopy (AFM). The adsorption isotherms obtained with depletion and QCM‐D techniques, although quantitatively different, present some similarities in shape. Both techniques suggest the existence of a compact end‐on monolayer of protein on the SS surface, while on the alumina surface a less dense side‐on monolayer is formed at lower BSA concentration, followed by a second layer at higher concentration. AFM topographical characterization of the protein films adsorbed on both materials confirms those findings. Further use of AFM in determining the thickness of the film adsorbed on SS yielded values in good agreement with the QDM‐D results. Different surface charges measured on powders and plates do not seem to affect adsorption. Protein radiolabeling seems to be the least reliable technique because it yields, for both materials, adsorption values higher than those from the other techniques. In the case of SS, the difference amounts to one order of magnitude. Copyright © 2008 John Wiley & Sons, Ltd.     

Direct determination of the thermodynamics of polyelectrolyte complexation and implications thereof for electrostatic layer-by-layer assembly of multilayer films

Interpolyelectrolyte complex (IPEC) formation between poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) has been studied over a range of ionic strengths by isothermal titration calorimetry (ITC), turbidity titration, and electrostatic layer-by-layer assembly (ELBL). The results indicate that IPEC formation of PSS/PAH in aqueous solution is predominantly entropy-driven. The thermodynamic parameters suggest the formation of different types of complexes and aggregates due to salt-induced conformational changes in the polyelectrolyte conformation. Differences in polyelectrolyte behavior in the different salt-concentration regimes are described in terms of changes in the Debye screening length of the polyelectrolytes. The relationship of the results to the effect of salt concentration on the assembly of polyelectrolyte multilayer films (PEMs) is discussed.     

Influence of the nature of the polycation on the adsorption kinetics and on exchange processes in polyelectrolyte multilayer films

The deposition of polyelectrolyte multilayer films (PEMs) appears more and more as a versatile tool to functionalize a broad range of materials with coatings having controlled thicknesses and properties. To increase the control over the properties of such coatings, a good knowledge of their deposition mechanism is required. Since Cohen Stuart et al. (Langmuir 18 (2002) 5607-5612) showed that the adsorption of one polyelectrolyte could induce desorption of polyelectrolyte complexes instead of regular deposition, more and more findings highlight peculiarities in the deposition of such films. Herein we demonstrate that the association of sodium polyphosphate (PSP) as the polyanion and either poly(-L-lysine hydrobromide) (PLL) or poly(allylamine chloride) (PAH) as the polycations may lead to non-monotonous film deposition as a function of time. Complementary, films containing PSP and PLL can be obtained from a (PLL-HA)(n) template films after the exchange of HA (hyaluronic acid) from the sacrificial template by PSP from the solution. This exchange is accompanied by pronounced film erosion. However, when starting from a (PAH-HA)(n) template, the film erosion and exchange due to the contact with PSP is by far less pronounced, nevertheless the film morphology changes. These findings show that the nature of the polycation used to deposit the PEM film may have a profound influence of the film's response to a competing polyanion.     

Participation of electrolyte cations in albumin adsorption onto negatively charged polymer latices

The participation of electrolyte cations in the adsorption of bovine serum albumin (BSA) onto polymer latices was investigated. The latices used were hydrophobic polystyrene (PS), and hydrophilic copolymers, i.e., styrene (St)/2-hydroxyethyl methacrylate(HEMA) copolymer [P(St/HEMA)] and styrene/acrylamide (AAm) copolymer [P(St/AAm)]. Three kinds of electrolyte cations (Na⁺, Ca²⁺, Mg²⁺) were used as the chloride. The amount of BSA adsorbed in every cation medium showed a maximum near the isoelectric point (iep, pH about 5) of the protein. The amounts of BSA adsorbed onto copolymer latices (except in the acidic pH region lower than the iep) were considerably smaller than that onto PS latex because of the steric repulsion and the decrease in the hydrophobic interaction between BSA and copolymer latices. In the acidic pH region, there was little difference in the amount of BSA adsorbed in every cation medium. However, in the pH region higher than the iep, the amounts of BSA adsorbed (particularly onto PS latex) in divalent cations (Ca²⁺ and Mg²⁺) media were relatively greater compared with that in a monovalent (Na⁺) one. This result was interpreted on the basis of the differences in such effects of electrolyte cations as dehydration power, suppression of the electrostatic repulsion, and binding affinity to BSA molecule. Ion Chromatographic estimation of the amounts of electrolyte cations captured upon BSA adsorption (in pH > 5) revealed that divalent cations were incorporated into the contact interface between the latex and BSA molecule so as to prevent the accumulation of anion charge and facilitate the protein adsorption.     

Fabrication of poly(p-phenylene vinylene) (PPV) nanoheterocomposite films via layer-by-layer adsorption

The fabrication of polyelectrolyte multilayer film architectures composed of a polycation precursor (Pre-PPV) of the electroluminescent poly(p-phenylene vinylene) (PPV) and two different counter-polyanions, cellulosesulfate and poly(vinylsulfate), are reported. All multilayers were characterized by UV/VIS-spectroscopy and X-ray reflectometry. Due to the differences in spatial arrangement of charged groups, rigidity, and conformation of the polyanions, the corresponding multilayer films differ in properties such as average thickness increments and surface roughness. The adsorbed amounts per layer can be adjusted by addition of inorganic salts. Thermal conversion of Pre-PPV to PPV is achieved already slightly above 100 °C, yielding identical absorption spectra for after either 3 h at 160 °C or 20 h at 120 °C. The heat treatment causes the film thickness to be reduced by 24–40% due to elimination of dimethylsulfide and HCl and also the loss of water, but the films stay optically transparent.     

Nano-alumina by gel combustion, its thermal characterization and slurry-based coating on stainless steel surface

Gel combustion method was used to prepare nano-alumina from aluminum nitrate and stoichiometric amount of glycine as fuel. The TG–DTA pattern of the as-prepared powder (combustion product) exhibited exotherms with peaks around 500 and 900 °C accompanied with loss of weight of 25 and 5 % attributed to burning away of carbon left behind and decomposition of residual reaction intermediates left behind, respectively. Even though mass stability is attained above 900 °C, the DTA exhibited an exotherm around 1,150 °C attributed to transformation of gamma to alpha form of alumina. The XRD studies revealed that the powder heated to 900 °C was chemically pure nano-crystalline alumina while that heated above 1,150 °C was crystalline alpha form. As nano-crystalline powders are sinter-active, the nano-crystalline alumina formed by calcination at 900 °C was used to form the coating. A morphological feature of the agglomerates of nano-alumina powders were evaluated using SEM. The powder was de-agglomerated by wet grinding method. The dispersion conditions to form slurry using 900 °C calcined powder for slurry-based coating was optimized using zeta-potential studies, and it was found to exhibit a maximum value of ?45 mV at a pH of 9. After 8 h of grinding, the median agglomerate size reduced to 2 μm. Rheological studies exhibited desired pseudoplastic behavior in the range of 10–20 vol.% of solid while the slurry with 15 vol.% only form crack free, dense, and adherent coating after heat treatment at 1,150 °C. The morphology of the coating was found to be uniform and dense.     

AFM and FTIR studies of organic cation adsorption on carbon steel coupled with stainless steel

The electrochemical behavior of the anode of the galvanic couple and the adsorption behavior of the cationic inhibitor on it have been investigated by using electrochemical methods, atomic force microscopy (AFM) and infrared spectroscopy (FTIR) technology. A galvanic electrode was prepared by coupling N80 carbon steel (CS) and S31803 stainless steel. All experiments were performed in NaCl solution in the presence or absence of an inhibitor. The results show that, in aqueous NaCl solution, CS carries negative excess charge, for the couple, positive charge is carried on the CS side (anode). The adsorption behavior of the cationic inhibitor on CS is significantly affected by the excess charge carried on it. Owing to the charge interaction between electrodes and the cationic inhibitor, the inhibitor has a greater tendency to adsorb on the single CS and less tendency to adsorb on the CS of the couple. Because of this, the adsorption film on the anode (CS side) of the couple is thin and defective. The failure of inhibiting galvanic corrosion attributes to the defective protective layer formed on the anodic area. Copyright © 2006 John Wiley & Sons, Ltd.     

Stability and adsorption properties of electrostatic complexes: design of hybrid nanostructures for coating applications

We report the presence of a correlation between the bulk and interfacial properties of electrostatic coacervate complexes. Complexes were obtained by co-assembly between cationic-neutral diblocks and oppositely charged surfactant micelles or 7 nm cerium oxide nanoparticles. Light scattering and reflectometry measurements revealed that the hybrid nanoparticle aggregates were more stable through both dilution and rinsing (from either a polystyrene or a silica surface) than their surfactant counterparts. These findings were attributed to a marked difference in critical association concentration between the two systems and to the frozen state of the hybrid structures.     

Modulating the pattern quality of micropatterned multilayer films prepared by layer-by-layer self-assembly

Patterned multilayer films composed of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS) were prepared using dip and spin self-assembly (SA) methods. A silicon substrate was patterned with a photoresist thin film using conventional photolithography, and PAH/PSS multilayers were then deposited onto the substrate surface using dip or spin SA. For spin SA, the photoresist on the substrate was retained, despite the high centrifugal forces involved in depositing the polyelectrolytes (PEs). The patterned multilayer films were formed by immersing the PE-coated substrates in acetone for 10 min. The effect of ionic strength on the pattern quality in dip and spin multilayer patterns (line-edge definition and surface roughness of the patterned region) was investigated by increasing the salt concentration in the PE solution (range 0-1 M). In dip multilayer patterns, the presence of salt increased the film surface roughness and pattern thickness without any deformation of pattern shape. The spin multilayer patterns formed without salt induced a height profile of about 130 nm at the pattern edge, whereas the patterns formed with high salt content (1 M) were extensively washed off the substrates. Well-defined pattern shapes of spin SA multilayers were obtained at an ionic strength of 0.4 M NaCl. Multilayer patterns prepared using spin SA and lift-off methods at the same ionic strength had a surface roughness of about 2 nm, and those prepared using the dip SA and lift-off method had a surface roughness of about 5 nm. The same process was used to prepare well-defined patterns of organic/metallic multilayer films consisting of PE and gold nanoparticles. The spin SA process yielded patterned multilayer films with various lengths and shapes.