不同参数多壁碳纳米管太赫兹谱特性

探索不同管径和长度的多壁碳纳米管（MWCNT）的太赫兹（THz）谱特性,采用透射型太赫兹时域光谱系统研究了5个不同管径和长度的MWCNT样品的太赫兹吸收谱和折射率谱,并对比和分析了它们的差异。结果表明：在0.2～2.0 THz内,多壁碳纳米管太赫兹吸收没有特征吸收峰,吸收强度随着频率的增加而增加,并可以拟合为不同斜率的直线,且MWCNT在THz波段的吸收强度与管径和长度成正比。折射率随着频率的增加呈指数衰减,同时,管径是影响其折射率的一个重要因素,而长度对其影响不大。     

不同参数多壁碳纳米管太赫兹谱特性

探索不同管径和长度的多壁碳纳米管(MWCNT)的太赫兹(THz)谱特性,采用透射型太赫兹时域光谱系统研究了5个不同管径和长度的MWCNT样品的太赫兹吸收谱和折射率谱,并对比和分析了它们的差异。结果表明:在0.2~2.0THz内,多壁碳纳米管太赫兹吸收没有特征吸收峰,吸收强度随着频率的增加而增加,并可以拟合为不同斜率的直线,且MWCNT在THz波段的吸收强度与管径和长度成正比。折射率随着频率的增加呈指数衰减,同时,管径是影响其折射率的一个重要因素,而长度对其影响不大。     

Transverse elasticity of multi-walled carbon nanotubes

A discrete shell model is proposed to describe the radial deformation of carbon nanotubes under a hydrostatic pressure and the radial Young's modulus of (single- or multi-walled) nanotubes is obtained. It is found that the radial modulus decreases with increasing tube diameter while increases with increasing number of layers. The computational results agree well with the previous results of SWNTs and indicate that the radial modulus of carbon nanotubes is independent of the Poisson's ratio.     

Effect of oxyfluorination on gas sensing behavior of polyaniline-coated multi-walled carbon nanotubes

Polyaniline-coated multi-walled carbon nanotubes were prepared by in situ chemical polymerization method for the novel sensing materials of ammonia gas. The thickness of the polyaniline coatings was controlled by the oxyfluorination treatment on the multi-walled carbon nanotubes. The oxyfluorination with higher oxygen content produced the more hydrophilic functional groups on the surface of multi-walled carbon nanotubes. Both the resistivity change and the response time were significantly improved with high repeatability using the more hydrophilic multi-walled carbon nanotubes which were modified with oxyfluorination.     

Effect of pulsed ion irradiation on the electronic structure of multi-walled carbon nanotubes

The effect of pulsed ion irradiation and vacuum annealing on the ratio of sp ²- and sp ³-hybridized orbitals of carbon atoms in the layers of oriented multi-walled carbon nanotubes has been studied by analyzing the photoemission spectra of the C1s core level and the valence band of carbon, which were obtained using the equipment of the BESSY II Russian-German beamline of synchrotron radiation and a Riber analytical system. It has been shown that the ion irradiation leads to a significant decrease in the fraction of atoms with the sp ³ hybridization of electrons. On the contrary, the annealing reduces the fraction of the sp ³-component in the spectra of carbon. Typical features of the valence band of multi-walled carbon nanotubes in the annealed and irradiated states have been established.     

Guided waves characteristics of multi-walled carbon nanotubes

The theoretical analysis of propagation of guided waves in the multi-walled carbon nanotubes is presented within the framework of the classical electrodynamics. Electronic excitations of each wall of the system are modeled as an infinitesimally thin cylindrical layer of the π-electrons, whose dynamics are described by means of the fluid theory. General expressions of dispersion relations are obtained for the electromagnetic wave with the transverse magnetic and transverse electric modes, respectively, by solving Maxwell and fluid equations with appropriate boundary conditions.     

XPS study of fluorinated carbon multi-walled nanotubes

Arc-produced carbon multi-walled nanotubes (MWNTs) were fluorinated at 420 °C in a flow of diluted F₂ gas containing small admixture of HF gas. Fluorinated materials (F-MWNTs) with 10–55 wt.% fluorine content were studied by XPS. It was shown that fluorination begins at the external layers of nanotubes and the reaction front propagates inside the multi-layer particles in concert with structural deterioration of graphene layers. The C₂F stoichiometry still allows MWNT wall integrity, similar to known for SWNTs. The fluorine contents in the product can noticeably exceed this higher fluorine limit for tube stability. The position of the F 1s line at 688.2 eV does not depend on the fluorine concentration. Nearly covalent C–F bonds dominate the F-MWNT samples, with a small quantity (2–9%) of ionic bonds also present. Fluorinated carbon tends to spatially separate from non-fluorinated carbon.     

多壁碳纳米管光限幅特性的研究

用化学气相沉积法制备了多壁碳纳米管,并将其溶解在甲苯溶液中.用波长为1064nm的皮秒脉冲激光测量该样品的透过率,发现了非常明显的光限幅特性.当入射光强较小时,透射光强度随入射光强度的增大而增大,输出与输入为线性关系;随着入射光强的增大,透射光强增长的速度明显变慢,并逐渐趋于饱和.当入射光强度较小时,样品的透过率接近100%;而当入射光强为8GW/cm²时,非线性透过率达到30%.根据三光子吸收理论计算,理论拟合与实验结果非常符合,说明多壁碳纳米管的三光子吸收产生了光限幅效应.实验测 关键词： 多壁碳纳米管 光限幅 三光子吸收     

Nitrogen-doped multi-walled carbon nanotubes for paracetamol sensing

A novel sensor consisting of nitrogen-doped multi-walled carbon nanotubes was fabricated by means of chemical vapor deposition technique with decomposition of acetonitrile onto oxidized silicon wafer using ferrocene as catalyst. The electrochemical response of carbon nanotubes-based sensor towards oxidation of paracetamol to N-acetyl-p-quinone imine was investigated in phosphate buffer solution (pH 7.0) by means of standard electrochemical techniques. A quasi-reversible response for oxidation of paracetamol was identified on carbon nanotubes-based sensor with detection limit and sensitivity of 0.485 μM and 0.8406 A M^?1 cm^?2, respectively. It was found that the nitrogen doping in carbon nanotubes enhances the sensor's detection ability. Namely, electrochemical studies performed on film consisting of pristine carbon nanotubes reveal as well quasi-reversible response towards oxidation of paracetamol but nevertheless poorer detection ability and sensitivity (0.950 μM; 0.601 A M^?1 cm^?2). The findings strongly suggest the application of nitrogen-doped carbon nanotubes in biosensing.     

Comparative study on modification of multi-walled carbon nanotubes by a hydrophilic polymer with different approaches

The multi-walled carbon nanotubes (MWNTs) modified by a hydrophilic polymer were prepared with polymerization and blending approaches. The differences of both modified MWNTs were compared by Fourier transform infrared and Raman spectroscopies, thermogravimetric analysis and transmission electron microscopy. Chemical grafting reaction had occurred between MWNTs and polyvinyl pyrrolidone (PVP) after modification with polymerization and blending approaches. Polymerization modification can graft more PVP on the surface of MWNTs compared with blending modification. Polymerization modification of MWNTs belongs to the “grafting from” mechanism, while blending modification belongs to the “grafting to” mechanism. Modified MWNTs exhibit remarkable solubility in water, ethanol and dimethyl formamide.     

拓扑缺陷对Armchair型小管径多壁碳纳米管输运性质的影响

采用密度泛函理论和非平衡格林函数方法研究了纯净的及带有不同数目的Stone-Wale拓扑缺陷下的扶手椅型单壁, 双壁和三壁小管径碳纳米管的能带结构和电子输运性质, 通过计算并分析不同偏压下的微分电导和非弹性电子隧穿谱(IETS), 计算结果表明单壁, 双壁和三壁碳纳米管的特征偏压区间分别为[-1.0V, 1.0V], [-0.5V, 0.5V] 和[-0.25V, 0.25V], 特征偏压区间内SW拓扑缺陷所产生的电导波动平缓, 而特征偏压区间外因缺陷的数目变化所带来的电导波动显著, 通过IETS谱线的分析得到单壁, 双壁和三壁碳纳米管的特征峰偏压分别为 1.25V, 0.625V和 0.125V. 碳纳米管的特征偏压区间和IETS特征峰偏压可为较小管径碳纳米管单壁, 双壁和多壁类型的区分提供一种新的途径, 同时也为小管径多壁碳纳米管的输运性质在出现拓扑缺陷时的响应提供参考依据.     

Low voltage STEM imaging of multi-walled carbon nanotubes

We present high magnification STEM images of multi-walled carbon nanotubes recorded with a 5 keV electron beam using a Helios Dual Beam microscope and a dedicated multi-segment transmission (STEM) detector. Images of carbon nanotubes recorded with bright-field (BF), annular dark-field (ADF) and high angle annular dark-field (HAADF) signals all show high contrast features, with internal structures 1-2 nm in width clearly revealed in the STEM images. Thicker regions of the nanotubes appear to show an unusual contrast reversal when comparing ADF and HAADF images. An understanding of the image contrast, and its dependence on thickness, is obtained by computing simulations of the ADF and HAADF images using Monte-Carlo software taking into account electron scattering in the nanotube.     

Dispersion of multi-walled carbon nanotubes in biocompatible dispersants

Owing to their phenomenal electrical and mechanical properties, carbon nanotubes (CNT) have been an area of intense research since their discovery in 1991. Different applications for these nanoparticles have been proposed, among others, in electronics and optics but also in the medical field. In parallel, emerging studies have suggested potential toxic effects of CNT while others did not, generating some conflicting outcomes. These discrepancies could be, in part, due to different suspension approaches used and to the agglomeration state of CNT in solution. In this study, we described a standardized protocol to obtain stable CNT suspensions, using two biocompatible dispersants (Pluronic F108 and hydroxypropylcellulose) and to estimate the concentration of CNT in solution. CNT appear to be greatly individualized in these two dispersants with no detection of remaining bundles or agglomerates after sonication and centrifugation. Moreover, CNT remained perfectly dispersed when added to culture medium used for in vitro cell experiments. We also showed that Pluronic F108 is a better dispersant than hydroxypropylcellulose. In conclusion, we have developed a standardized protocol using biocompatible surfactants to obtain reproducible and stable multi-walled carbon nanotubes suspensions which can be used for in vitro or in vivo toxicological studies.     

Covalent functionalization of multi-walled carbon nanotubes by lipase

Lipase from Candida rugosa was covalently anchored onto acid-treated multi-walled carbon nanotubes (MWNTs) through a self-catalytic mechanism. A variety of characterization techniques including FTIR, Raman spectroscopy, and XPS were employed to demonstrate the formation of the ester linkage between lipase and MWNTs. The MWNTs-lipase biocomposites showed significantly increased solubility in some common-used organic solvents, such as THF, DMF and chloroform. This study may offer a novel and facile route for covalent modification of carbon nanotubes, and expand the potential utilization of both lipases and MWNTs in the fields of biocatalyst and biosensor.     

Field electron emission images of multi-walled carbon nanotubes

Field electron emission microscope images from multi-walled carbon nanotubes can typically be characterized by the presence of five pentagons surrounding a sixth central pentagon. The observations of bright line centered interference patterns between adjacent pentagons in the field electron emission microscope images of multi-walled carbon nanotubes have been reported in the literature. We have observed a shift from bright to dark line centered interference patterns and associated this with the presence of surface adsorption. In order to identify the origin of the contaminant, multi-walled carbon nanotubes were dosed with H₂, H₂O, CO and O₂ and then imaged in the field electron emission microscope. Only the samples exposed to O₂ showed a shift from a bright line centered pattern between adjacent pentagons of a clean surface to a dark line centered pattern when one pentagon was contaminated or a bright line centered pattern when both adjacent pentagons become contaminated. The results of the experimental studies and the modeling of the changes in the field emission pattern as phase shifts in the wave function of the tunneling electrons due to modifications in the surface work function are presented.     

Preparation and characterization of amphiphilic multi-walled carbon nanotubes

Multiwalled carbon nanotubes (MWCNTs, average diameter 8 nm) functionalized by N-vinyl pyrrolidone (NVP) were synthesized by radical polymerization and characterized by Fourier transform infrared and Raman spectroscopies, thermogravimetric analysis and transmission electron microscopy. These NVP–MWCNTs exhibit remarkable solubility in water, ethanol and dimethyl formamide. The polyvinyl pyrrolidone can be attached onto the surface of the MWCNTs and the degree of functionalization is affected by NVP content. The functionalization causes possible grafting reaction and solid physical coating between MWCNTs and PVP.     

Effect of small length scale on elastic buckling of multi-walled carbon nanotubes under radial pressure

A nonlocal multiple-shell model is developed for the elastic buckling of multi-walled carbon nanotubes under uniform external radial pressure on the basis of theory of nonlocal elasticity. The effect of small length scale is incorporated in the formulation. An explicit expression is derived for the critical buckling pressure for a double-walled carbon nanotube. The influence of the small length scale on the buckling pressure is examined. It is concluded that the critical buckling pressure for a carbon nanotube could be overestimated by the classic (local) shell model due to ignoring the effect of small length scale.     

Milling and dispersion of multi-walled carbon nanotubes in texanol

Rheological results were used to determine the optimum type of dispersant and its concentration for six commercial dispersants for the dispersion of multi-walled carbon nanotube (MWCNT) agglomerates in texanol. An unsaturated polycarboxylic acid copolymer (BYK P-104) exhibited the optimum performance with the lowest MWCNT slurry viscosity in texanol. The cutting and dispersion efficiencies of MWCNTs with 20 wt.% of BYK P-104 dispersant were compared using conventional ball milling and high energy milling, whereby the latter was found to be more effective. High energy milling for 2 h produced a large portion of MWCNT agglomerates smaller than 150 nm, showing a drastic increase in slurry viscosity due to the dispersion into individual CNTs. On the other hand, 120 h ball milling was required to achieve the agglomerate size of 300 nm with less viscosity increase upon milling. Decrease in the degree of MWCNT crystallinity was observed by both milling, even though 2 h high energy milling showed slightly less damage than 120 h ball milling based on XRD and Raman spectroscopy results.     

氢在多壁碳纳米管中的吸附储存

利用巨正则系综蒙特卡罗(GCMC)的方法模拟了氢在多壁碳纳米管中的吸附,氢气分子之间、氢气分子和碳原子之间的相互作用势能采用Lennard-Jones势能模型。模拟了不同结构参数(管内径、管壁数、管壁间距)的多壁碳纳米管在77K和298K下的吸附等温线,分析了多壁碳纳米管的管内径、管壁数以及管壁间距对吸附性能的影响。模拟结果表明:多壁碳纳米管的管壁数和管壁间距对吸附性能的影响较明显;管壁数越少,管壁间距越大,其吸附性能越好;多壁碳纳米管的管内径对其吸附性能的影响甚微。     

Electric resistivity of multi-walled carbon nanotubes at high temperatures

The electric resistivity of a clean multi-walled carbon nanotube (MWNT) mat sample was studied at temperatures T between 300 and 1900 K. We found that the resistivity ρ decreases monotonously with increasing temperature without showing any sign of turn up. Our results can be well fitted with a power law of T^−α within the framework of one dimensional Luttinger liquid theory with α = 0.13 or with a simple thermally activated inter shell hopping model.