Catalytic conversion of nitrogen-containing compounds over monolithic oxide catalysts

Several reactions of nitrogen-containing compounds (NO+NH₃+O₂; NO+C₃H₈ +O₂; NH₃+O₂) on monolithic oxide catalysts studied at the Boreskov Institute of Catalysis (BIC) during the last few years are discussed. Effective catalytic systems for the reactions listed above are described.     

Infrared study of surface species arising from ammonia adsorption on oxide surfaces

Infrared spectra of ammonia adsorbed on CoO, NiO, SiO₂, CaO, MgO, ZrO₂, ZnO, TiO₂, BeO and Al₂O₃, have been studied in the NH stretching and bending vibration regions at various stages of sample dehydroxylation. Several types of adsorption were found: hydrogen bonding to surface oxygen atoms or hydroxyl groups, coordination to Lewis acid sites and coordination plus hydrogen bonding; on some oxides ammonia molecules dissociate to produce surface NH₂ and OH groups. Frequencies characteristic of the distinct adsorbed species were determined. Except for Al₂O₃, no evidence was found for Brönsted acid sites on the surface of the above oxides.     

The concentration of surface VO species on oxidized vanadium oxide catalysts

The hollandite-type phase K_1.33Mg_3.11Sb_4.89O₁₆ has been studied by X-ray and electron diffraction as well as high resolution electron microscopy at 500 kV. This material was found to adopt the tetragonal hollandite structure, space group $\text{I4}\text{m}$, with a = 10.315 (4)Å; c = 3.080 (4) Å. The formation of a 3c body-centered supercell was observed and this was shown to be due to ordering of potassium cations within the tunnel sites. Computer image simulations established that ordering of the tunnel cations alone rather than the octahedrally coordinated framework cations was responsible for superlattice formation. In some crystals the supercell ordering appeared to occur in domains.     

Modelling reduction of nitric oxide by hydrogen over supported catalysts

A mean field model for NO oxidation with H₂ over supported catalysts is proposed and solved numerically. The model is composed of a system of PDEs subject to nonclassical conjugate conditions at the catalyst–support interface and includes the bulk diffusion of reactants and reaction products and surface diffusion of all intermediate products. The influence of the particle jumping rate constants via the catalyst–support interface and reaction rate constants on the evolution of the reactivity of the catalyst surface is investigated. It is shown that the conversion rates (turnover frequencies) of NO and H₂ into products, N₂, H₂O, NH₃, and N₂O, are nonmonotonous functions of time. The conversion rates of NO and H₂ into N₂ and N₂O can have one or two local maxima, while their conversion rates into H₂O and NH₃ can possess one, two, or three local maxima. The mechanism and conditions for arising of the second maximum are discussed and reaction steps that essentially increase the surface reactivity are indicated.

     

Calculation of adsorption heats of nitric oxide on ruthenium by the bond interaction method

Chemisorption heats of nitric oxide on Ru(0001) and Ru(1010) planes have been calculated by the bond interaction method. It is shown that the calculated values correlate well with TPD data.

---

(000I) (I0I0) . , .

     

High-selectively determination of nitric oxide on nanoporous gold electrode

Journal of Solid State Electrochemistry - Here, a nanoporous gold electrode (NAu) was reported with a unique cone-shape nanohole structure for electrochemical sensing of nitric oxide (NO), which...     

Theoretical study of nitric oxide adsorption on Au clusters

The adsorption properties of NO molecule on anionic, cationic, and neutral Au(n) clusters (n=1-6) are studied using the density functional theory with the generalized gradient approximation, and with the hybrid functional. For anionic and cationic clusters, the charge transfer between the Au clusters and NO molecule and the corresponding weakening and elongation of the N-O bond are essential factors of the adsorption. The neutral Au clusters have also remarkable adsorption ability to NO molecule. The adsorption energies of NO on the cationic clusters are generally greater than those on the neutral and anionic clusters.     

用IR-电子天平重量吸附法快速测定催化剂表面酸度

建立了用IR 电子天平重量吸附法测定固体催化剂及载体表面酸度的分析方法,解决了实际工作中对酸度较低的催化剂及载体的表面酸度测定不准确的问题。结果表明:该方法与原有的IR 石英弹簧重量法相比,分析结果的相对标准偏差有较明显的提高,单个样品的分析时间由8～10h减少到4h左右。     

The origin of surface stress induced by adsorption of iodine on gold

The cantilever technique for the measurement of film stress on both macroscopic and microscopic cantilevers is validated, then applied to the experimental determination of film stress induced by the adsorption of a monolayer of iodine onto a gold substrate. A model is proposed that relates the change in the interatom potential upon chemisorption of iodine onto gold to the measured film stress. Excellent agreement is found with the experimentally determined value. This result gives insight into the origins of film stress that is observed in all thin film and coating applications.     

Generic nitric oxide (NO) generating surface by immobilizing organoselenium species via layer-by-layer assembly

A universal nitric oxide (NO) generating surface is assembled via Layer-by-Layer (LbL) deposition of sodium alginate (Alg) and organoselenium modified polyethyleneimine (SePEI) on quartz and polymeric substrates. The immobilized SePEI species is capable of catalytically decomposing S-nitrosothiol species (RSNO) to NO in the presence of thiol reducing agents (e.g., glutathione, cysteine, etc.). The stepwise buildup of the multilayer films is monitored by UV-vis spectroscopy, SEM and surface contact angle measurements. X-ray photoelectron spectroscopy is used to study the stoichiometry between the polyanion and polycation, and also the presence of Se in the catalytic LbL film. A reductive annealing process is necessary to improve the stability of freshly coated multilayer films via chain rearrangement. Chemiluminescence measurements illustrate the ability of the LbL films to generate NO from S-nitrosoglutathione (GSNO) in the presence of glutathione (GSH). Enhanced NO fluxes can be achieved by increasing the number of catalytic (SePEI/Alg) bilayers coated on the substrates. Nitric oxide generation is observed even after prolonged contact with sheep whole blood. Preliminary applications of this LbL on silicone rubber tubings and polyurethane catheters reveal similar NO generation behavior from these biomedical grade polymeric substrates.     

Adsorption of gold nanoparticles obtained by vacuum deposition on an amorphous polymer surface

Spatial distribution of gold nanoparticles obtained by vacuum deposition on the surface of amorphous polymers was studied within the limits of the cluster lattice model.     

Diffusion-limited thiol adsorption on the gold(111) surface

An optical second harmonic generation measurement of the kinetics of self-assembly of a monolayer of thiols on the Au(111) surface reveals a marked dependence of the adsorption rate upon the solution flow rate. The nature of this dependence indicates that at low concentration and low flow rate the monolayer growth is limited by the existence of a Nernst diffusion layer, not by surface reaction rate kinetics.     

Identification of nitric oxide donors by biomimetic HTS application

Metalloporphyrin catalyzed biomimetic oxidation was used for the identification of nitric oxide (NO) donors with diverse chemical structure. Methodology was validated by testing known NO donors. Efficient automation of the test allowed us to investigate a subset of our corporate library. Several hits identified in this campaign were validated in both the chemical and also microsomal model that revealed all hits to be active in the biological system, as well. One of the hits showed comparable activity to V-PYRRO/NO, the prototypic liver selective NO donor.     

XPS studies on the gold oxide surface layer formation

The initial stage of gold oxide layer formation on the gold electrode surface was investigated in 0.5 M H₂SO₄. X-ray photoelectron spectroscopy (XPS) spectra of pure gold and the anodically polarized gold electrode surface were compared quantitatively. It was found that gold anodic polarization in the E range from ∼1.3 to 2.1 V causes increase in intensity of the XPS spectra at an electron binding energy ε_b=85.9 eV for gold and at ε_b=530 eV for oxygen. These ε_b values correspond to Au³⁺ and O²⁻ oxidation states in hydrous or anhydrous gold oxide. The larger the amount of the anodically formed surface substance the higher is the intensity of the spectrum at the ε_b values mentioned above. It was concluded that gold anodic oxidation, yielding most likely an Au(III) hydroxide surface layer, takes place in the E range of the anodic current wave beginning at E≈1.3 V. At E_B=1.7 V (the potential of the Burshtein minimum) the stationary surface layer consists of 2.5 to 3 molecular layers of Au(OH)₃. The theoretical amount of charge required for the reduction of one molecular layer of Au(OH)₃ is ∼0.15 mC cm⁻², since the Au(OH)₃ molecule is planar and occupies about four atomic sites on the electrode surface.     

Deamination of butylamines on the surface of acidic oxide catalysts

Studies of the deamination of tert-, sec- and n-butylamines on several silicate and phosphate catalysts at 543–704 K have revealed that the reaction proceeds only with the participation of protonic cneters, its rate is independent of the strength of acidic centers and affected only by the amine structure. Butylammonium ion conversion is suggested to be the rate-determining step.

---

-, - - 543–703 . , . , . , .

     

Understanding the adsorption of branched polyamine on surface of gold nanoparticles by molecular dynamics simulations

Molecular dynamics simulations were conducted to characterize the adsorption behavior of branched polyethylenimine (br‐PEI) on the surface of gold nanoparticles (AuNPs). We observed the preferential adsorption of br‐PEI on the [111] surface of AuNPs. Furthermore, br‐PEI maintained a flat arrangement on the surface and wrapped the AuNPs in a stable manner, thereby blocking the adsorption of H₂O molecules and other free br‐PEI molecules. The model and computational results provide theoretical support for relevant experiments. Copyright © 2016 John Wiley & Sons, Ltd.     

Ultrasonic effects on electroorganic processes: Part 15. Self-assembled adsorption of pyridinethiolate species on a gold surface

The rate and saturated amount of the self-assembled adsorption of 4-pyridinethiolate species on a polycrystalline gold surface from an ethanol solution of di(4-pyridyl)disulfide were significantly increased under ultrasonic irradiation with an intensity higher than the ultrasonic cavitation threshold. Meanwhile, interestingly, the saturated amount decreased with an increase in concentration of di(4-pyridyl)disulfide under irradiation, while it was unchanged in the absence of ultrasound.     

Oxygen adsorption on gold nanofacets and model clusters

We have studied oxygen interaction with Au crystals (field emitter tips) using time-resolved (atom-probe) field desorption mass spectrometry. The results demonstrate no adsorption to take place on clean Au facets under chosen conditions of pressures (p < 10(-4) m/bar) and temperatures (T = 300-350 K). Steady electric fields of 6 V/nm do not allow dissociating the oxygen molecule. The measured O2+ intensities rather reflect ionization of O2 molecules at critical distances above the Au tip surface. Certain amounts of Au-O2 complex ions can be found at the onset of Au field evaporation. Calculations by density functional theory (DFT) show weak oxygen end-on interaction with Au10 clusters (Delta E = 0.023 eV) and comparatively stronger interaction with Au1/Au(100) model surfaces (Delta E = 0.25 eV). No binding is found on {210} facets. Including (positive) electric fields in the DFT calculations leads to an increase of the activation energy for oxygen dissociation thus providing an explanation for the absence of atomic oxygen ions from the field desorption mass spectra.