2,5-取代-1,3,4-噁二唑化合物库的固相合成

本文使用组合化学方法以聚苯乙烯亚磺酸钠树脂（1）为载体合成了2，5-取代-1，3，4-二唑化合物库。树脂1首先与溴代乙酸乙酯反应生成聚合物支载的乙酸酯（2）。肼解后所得的肼树脂进一步与取代的苄氯反应得双欧讲树脂（4）。树脂4与三氯氧磷回流得聚合物支载的2，5-取代-1，3，4-二唑（5）。用W-溴代乙酰苯酮烷基化后聚合物支载的产物用三乙胺解脱得2-芳基-5-芳甲酰亚乙烯基-1，3，4-二唑化合物库，产率15％-36％。     

2-硝基-4-氯-2'-羟基-3'-特丁基- 5'-甲基偶氮苯的固相合成

2-硝基-4-氯-2'-羟基-3'-特丁基- 5'-甲基偶氮苯的固相合成;硝基氯羟基特丁基甲基偶氮苯;固相合成;重氮偶合     

A Convenient Method for Synthesis of Novel Cyclic Ethers （IR, 2R,3R, 5S, 7S, 9R, 12R）-3-（t-Butyldimethylsilyl）oxy-7-methoxymethyl- oxy-2, 10-dimethyl-12-oxatricyclo [7.2.1.0^5,12] dodecane

Novel cyclic esters (1R, 2R, 3R, 5S, 7S, 9R, 12R)-3-(t-butyldimethylsilyl)oxy-7-methoxymethyloxy-2, 10-dimethyl-12-oxatricyclo [7.2.1.0^5,12] dodecane were prepared when their precursor 1 was treated with SOC12/pyridine. A plausible mechanism was hypothesized.     

Facile Synthesis of Internal and C‐Terminal Peptide α‐Ketoamides with Fmoc‐Solid Phase Peptide Synthesis

We report a general and operationally simple method for the solid phase synthesis of α‐ketoamide peptides using standard Fmoc solid phase peptide synthesis. The method delivers deprotected peptide α‐ketoamides directly upon resin cleavage without any additional steps, and tolerates all side chain functional groups. A small collection of C‐terminal and internal α‐ketoamide peptides – including two reported protease inhibitors (HCV and SUB1) – were prepared in good yields. In addition, we demonstrate that our method serves as versatile platform for the convenient preparation of cyclic α‐ketoamide peptides, photocagged peptide α‐ketoamides, and fluorescently labeled peptides.     

Solid Phase Synthesis of Ethyl β-Substituted Indolepropionates

A facile solid phase synthesis of ethyl β-substituted indolepropionates is reported. Condensation between indole, polymer-supported cyclic malonic acid ester and aldehyde yielded the trimolecular adducts, which was cleaved by pyridine/EtOH to release the final products in good yield with high purity.     

Selective Pre-concentration and Solid Phase Extraction of Mercury（Ⅱ） from Natural Water by Silica Gel-loaded （E）-N-（1-Thien-2＇-ylethylidene）-1,2-phenylenediamine Phase

Silica gel-loaded （E）-N-（1-thien-2＇-ylethylidene）-1,2-phenylenediamine （TEPDA） phase was synthesized based on physical adsorption approaches. The stability of a chemically modified TEPDA especially in concentrated hydrochloric acid that was then used as a recycling and preconcentration reagent allowed the further uses of silica gel-loaded immobilized TEPDA phase. The application of this silica gel-loaded phase to sorption of a series of metal ions was performed by using different controlling factors such as the pH of the metal ion solution and the equilibration shaking time by the static technique. This difference was interpreted on the basis of selectivity incorporated in these sulfur containing silica gel-loaded TEPDA phases. Hg（Ⅱ） was found to exhibit the highest affinity towards extraction by these silica gel-loaded TEPDA phases. The pronounced selectivity was also confirmed by the determined distribution coefficients （Kd） of all the metal ions, showing the highest value reported for mercury（Ⅱ） extraction by the silica gel immobilized TEPDA phase. The potential applications of the silica gel immobilized TEPDA phase to selective extraction of mercury（Ⅱ） from aqueous solution were successfully accomplished and preconcentration of low concentration of Hg（Ⅱ） （30 pg·mL^-1） from natural tap water with a preconcentration factor of 200 for Hg（Ⅱ） off-line analysis was conducted by cold vapor atomic absorption analysis.     

Liquid‐Phase Synthesis of 2′‐Methyl‐RNA on a Homostar Support through Organic‐Solvent Nanofiltration

Due to the discovery of RNAi, oligonucleotides (oligos) have re‐emerged as a major pharmaceutical target that may soon be required in ton quantities. However, it is questionable whether solid‐phase oligo synthesis (SPOS) methods can provide a scalable synthesis. Liquid‐phase oligo synthesis (LPOS) is intrinsically scalable and amenable to standard industrial batch synthesis techniques. However, most reported LPOS strategies rely upon at least one precipitation per chain extension cycle to separate the growing oligonucleotide from reaction debris. Precipitation can be difficult to develop and control on an industrial scale and, because many precipitations would be required to prepare a therapeutic oligonucleotide, we contend that this approach is not viable for large‐scale industrial preparation. We are developing an LPOS synthetic strategy for 2′‐methyl RNA phosphorothioate that is more amenable to standard batch production techniques, using organic solvent nanofiltration (OSN) as the critical scalable separation technology. We report the first LPOS‐OSN preparation of a 2′‐Me RNA phosphorothioate 9‐mer, using commercial phosphoramidite monomers, and monitoring all reactions by HPLC, ³¹P NMR spectroscopy and MS.     

Synthesis and Solid‐state Reaction of 1‐[3′‐(Benzotriazol‐2″‐yl)‐4′ ‐hydroxybenzoyl]‐3‐methyl‐5‐pyrazolones

A new kind of UV stabilizers, 1‐(3′‐(benzotriazol‐2″‐yl)‐4′‐hydroxy‐benzoyl)‐3‐methyl‐5‐pyrazolones (1a‐d), was synthesized with the aim to bind them chemically to certain polymers. The reaction of 1d with substituted benzaldehydes 4 in the molten state at 150°C and in the solid state at room temperature produced the condensation products l‐(3′‐(5″‐chlorobenzotriazol‐2″‐yl)‐4′‐hydroxyl‐5′‐chlorobenzoyl)‐3‐methyl‐4‐arylmethylene‐5‐pyrazolones (2) and 4,4′‐arylmethylene‐bis [1‐(3′‐(5″‐chloro‐benzotriazol‐2″‐yl)‐4′‐hydroxy‐5′‐chloro‐benzoyl)‐3‐methyl‐5‐pyrazolone] s (3), respectively, as the major product. On the other hand, the reaction of 1d with 4 at 50°C in chloroform solution proceeded non‐selectively to give a mixture of 2 and 3.     

Solid Phase Synthesis of 4（1H）Quinolones from Resin—Bound Cyclic Malonic Ester

The solid phase synthesis of 4(1H) quinolones has been reported.     

Liquid-Phase Synthesis of Methyl （2Z）-2-Arylsulfonylmethyl-2-alkenoates from PEG-Supported a-Phenylselenopropionate

Treatment of lithio derivativ e of novel PEG-supported a-phenylselenopropionate with aldehydes, followed by oxidation-elimination with 30% hydrogen peroxide, formed Baylis-Hillman products, which were then reacted with sodium arylsulfinate. The resulting sulfonylated products were cleaved from the PEG efficiently affording methyl （2Z）-2-arylsulfonylmethyl-2-alkenoates in good yields and high purities.     

聚合物负载磺酸催化的三组分反应合成1-酰胺烷基-2-萘酚

聚合物负载磺酸，一种环境友好的固体酸催化剂，可以有效地催化2-萘酚、脲或酰胺和醛的三组分“一锅”反应生成1-酰胺烷基-2-萘酚。该方法得率高，操作简单。