Further understanding on the three domains of isotactic polypropylene by investigating the crystalline morphologies evolution after treatment at different domains

The introduction of concept of the three domains of isotactic polypropylene (iPP) by Wittmann and Lotz et al. is an important advance in understanding the influence of the melt structures on the crystallization behaviors and consequent properties. To further understand the physical nature of the melt structures, the crystalline structures of iPP after thermal treatment in the three domains are systematically investigated. It is found that after treated at different domains the crystal morphologies, including the sizes and birefringence of spherulitic, the proportion of radial and tangential lamellae, etc., have distinctly different features. Our study reveals that the “nuclei” at domain II compose of locally ordered chains and the induced memory effect could not be erased under annealing treatment, while the “nuclei” at domain III compose of crystal fragments, which will aggregate under annealing process. Based on our results, highly schematic diagrams are proposed to illustrate the probable physical characteristics of the melt structures at the three different domains.     

Changes induced by ultraviolet light in fluorescence of collagen in the presence of β-carotene

The influence of UV radiation (253.7 nm) on collagen fluorescence in the absence, and presence, of β-carotene was investigated. It was found that UV radiation of 253.7 nm causes irreversible destruction of tyrosyl and phenylalanyl residues. The fluorescence of collagen (excitation at 275 nm, emission at 305 nm) decreased rapidly during irradiation and a new fluorescence large band at 400–500 nm formed under UV radiation. Smaller changes in the fluorescence of collagen in the presence of β-carotene suggest that it makes collagen less sensitive to the action of UV radiation.     

Development and characterisation of flame-retardant fibres from isotactic polypropylene melt-compounded with melamine-formaldehyde microcapsules

Intumescent flame-retardant textiles have been developed from flame-retardant microcapsules. The work is based on the synthesis of different melamine-formaldehyde microcapsules containing di-ammonium hydrogen phosphate and/or poly(1,6-hexamethylene adipate) by in-situ polymerisation. Two types of shell have been produced, composed of melamine formaldehyde or melamine formaldehyde-poly(hexamethylene adipate glycol). The microcapsules obtained were melt-compounded at 5%-wt with an isotactic polypropylene matrix using a twin-screw extruder, and multi-filaments have afterwards been spun from the various extrudates. The manufactured fibres were mechanically characterized by measuring their tensile properties, and their thermal properties were investigated by DSC and TGA. Finally, knitted fabrics were processed from the multi-filaments: their flame-retardant properties were evaluated by performing a fire test with a cone calorimeter, and their thermal conductivity measured with a Hot Disk. The different thermal behaviours are discussed in terms of the influence of system formulation on the overall thermal degradation, due to interactions between the different components of the flame-retardant microcapsules. The results showed that for one of the structures, an intrinsic intumescent flame-retardant system has been achieved.     

Radiation resistant polypropylene blended with mobilizer,: antioxidants and nucleating agent

Post-irradiation storage of medical disposables prepared from isotactic polypropylene renders them brittle due to degradation. To avoid this, isotactic polypropylene [(is)PP] was blended with a mobilizer, dioctyl pthallate (DOP), three antioxidants (hindered amines and a secondary antioxidant) and benzoic acid to obtain radiation-resistant, thermally-stable and transparent material. Different formulations prepared were subjected to gamma radiation to doses of 25 and 50 kGy. Tests of breakage on bending after ageing in an oven at 70°C up to 12 months have shown that the addition of DOP and the antioxidants imparts improved radiation and thermal stability as compared to (is)PP alone or its blend with DOP. All the formulations irradiated or otherwise demonstrated excellent colour stability even after accelerated ageing at 70°C for prolonged periods.     

The effect of p-tert-butylcalix[n]arene on γ-radiation degradation of polypropylene

The γ-radiation effect of polypropylene was investigated in the presence of three kinds of p-tert-butylcalix[n]arene (n=4, 6, 8) in air at ambient temperature. The influence of radiation dose and store time upon the mechanical properties of the irradiated PP sheets were measured. The results showed that the radiation stabilization was reduced with the increase of the ring size of calixarenes. Based on the mass spectra and the analysis of post-irradiated product, the mechanism of radiation degradation of p-tert-butylcalix[4]arene has been proposed.     

Tensile behaviour of isotactic polypropylene modified by specific nucleation and active fillers

Commercial-grade polypropylene was modified with a specific nucleation agent based on an amide of dicarboxylic acid, which promotes crystallization predominantly in the β-phase. The resulting material was used as a matrix for composites containing 10%, 20%, and 30% (by weight) of different calcium carbonate fillers. These fillers differed in particle size and surface treatment. The β-phase content, morphology and tensile mechanical properties were investigated. A distinct β-nucleation activity was found with surface-treated fillers; nevertheless, to obtain stiff and reasonably ductile composite materials, a matrix containing a critical nucleant concentration (0.03 wt%) was necessary.     

Partial melting and recrystallization of isotactic polypropylene

<正>A relatively high predetermined crystallization temperature(135℃) was chosen to grow well developed iPP spherulites,then the partial melting was carried out at a temperature of 165℃,where the preformed spherulites were seen to only decrease their size but not completely melted.The crystallization behavior of partially melted isotactic polypropylene (iPP) has been carefully examined by different scanning calorimetry(DSC) and polarized light microscopy(PLM).The experimental results show that at a special annealing temperature(165℃) the melting behavior of iPP includes two parts with different mechanism,one part is the melting of iPP spherulite outside,another is the partial lamellae perfection during longer annealing time in the unmelted spherulite.The conformational orders of the iPP melt decrease with the increase of the annealing temperature.     

Gel production, oxidative degradation and dielectric properties of isotactic polypropylene irradiated under various atmospheres

In this work, changes in structure and physical properties of stabilized isotactic polypropylene (iPP) were created by gamma irradiation, up to a dose of 700 kGy, in different media: air, deionised distilled (DD) water and acetylene. Gel and infrared (IR) spectroscopy measurements were used to determine the changes in the degree of network formation and oxidative degradation, respectively. Sol-gel analysis was studied in detail using the Charlesby-Pinner (C-P) equation. The radiation-induced changes in the structure and evolution of oxygen-containing species were also studied through dielectric loss (tan δ) analysis in a wide temperature and/or frequency range. Evolution of low temperature dielectric relaxations with gamma irradiation was investigated. In the case of dielectric relaxation measurements, the polar groups that were introduced by irradiation in non-polar iPP were considered as tracer groups. Conclusions derived according to different methods were compared.     

Surface modification of polypropylene membranes by γ-ray induced graft copolymerization and their solute permeation characteristics

Porous hydrophobic polypropylene (PP) membranes were subjected to the surface modification by the γ-ray induced graft copolymerization with hydrophilic 2-hydroxyethyl methacrylate (HEMA). The structural changes and surface morphologies of the modified PP membranes were characterized by a Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA) and field emission scanning electron microscopy (FE-SEM). Peroxides produced from γ-ray irradiation were determined by a 1,1-diphenyl-2-picryl hydrazyl (DPPH) method and the surface hydrophilicities of membranes were measured by a static contact angle measurement. The contact angle of the modified membranes reduced with the degree of grafting (DG) of HEMA onto the membrane surface, and it decreased up to about half of that before modification. The permeation behaviors of all membranes were investigated by a bovine serum albumin (BSA) filtration experiment. As a result, the DG of the modified membrane increased with the reaction time. However, in the case of irradiation dosage it showed the maximum value at 20 kGy. Also, the modified membrane showed a higher solution flux, lower BSA adsorption, and the better flux recovery after cleaning than that of the unmodified membrane. Particularly, 40.6% grafted membrane showed a two-fold increase in a BSA solution flux, 62% reduction in total fouling and three-fold increase in flux recovery after chemical cleaning.     

H2O effects on the inclusional complexation of β-cyclodextrin with sodium 2-naphthalenesulfonate in capillary electrophoresis and UV spectrophotometry

In capillary electrophoresis, deuterium isotope effects of ²H₂O in the running buffer on the equilibrium constant (K) for the formation of an inclusion complex between β-cyclodextrin and sodium 2-naphthalenesulfonate (2NS) have been investigated. The K value for ²H₂O is 27% greater than that for H₂O. A similar trend in the K value of 2NS has been obtained from the results employing a UV spectrophotometric method.     

Preparation of polypropylene/poly(styrene-co-(butyl methacrylate)) nanoblends by diffusion and subsequent copolymerization of monomers in isotactic polypropylene pellets

The diffusion and subsequent copolymerization of styrene(St)/butyl methacrylate(BMA) mixed monomers in i PP pellets to prepare copolymer nanoblends were investigated. The diffusion step was carried out at 90 ℃ for 2 h in water, and the copolymerization was initiated by the addition of BPO with the aid of a small amount of St. The diametrical distributions of both St and BMA units and their ratio St/BMA were investigated by micro FTIR. Both St and BMA can diffuse into the centres of i PP pellets. The diametrical distribution of St/BMA ratio is constant in all the copolymer blends. The copolymer composition depends on the comonomer feed ratio. The molecular weights of the copolymers were measured by GPC after extraction with tetrahydrofuran. The phase morphology of the copolymer blends was investigated by FESEM, showing the average particle sizes of less than 100 nm. DSC measurements show that the diffusion and subsequent copolymerization of St/BMA monomers only occur in the amorphous regions of i PP pellets.     

Control of surface morphology of polypropylene/polystyrene blend pellets prepared by diffusion and subsequent polymerization of styrene in isotactic polypropylene pellets

Inhibitor hydroquinone (HQ) was added to the reaction system to prepare polypropylene/polystyrene (PP/PS) blend pellets without PS on the surface during diffusion and subsequent polymerization of styrene in isotactic polypropylene pellets. The effects of the amount of HQ on diametrical distribution of PS, surface morphology of the pellets and phase morphology inside the blend pellets were investigated.     

Stability and phase transformations of the mesomorphic form of isotactic polypropylene in stereodefective polypropylene

A study of the thermodynamic stability and the related polymorphic transformations induced by thermal treatments of the mesomorphic form that crystallizes in stereodefective metallocene isotactic polypropylene (iPP) is presented. We show that the mesomorphic form of the more isotactic samples is stable at room temperature, whereas the mesomorphic form crystallizing in the more stereoirregular sample is unstable and crystallizes at room temperature in the crystalline α form. In any case, the mesomorphic form transforms during heating or by annealing at temperatures higher than 60–80 °C always in the α form, regardless of the stereoregularity, even in the case of stereoirregular samples generally crystallizing from the melt in the γ form. These data confirm the proposed model of structure of the mesomorphic form as small aggregates of chains in three-fold helical conformation packed with lateral correlations similar to the α form of iPP.     

The origins of volatile oxidation products in the thermal degradation of polypropylene, identified by selective isotopic labeling

Making use of polypropylene samples that are selectively labeled with carbon-13 at each of the three unique positions within the repeating unit, we are conducting mass spectral analyses of the volatile organic oxidation products that are produced when the polymer is subjected to elevated temperature in the presence of air. By examination of both the parent and fragmentation ion peaks in the mass spectrum, we are able to identify the positioning of the C-13 labels within the volatile compounds, and thereby map each compound onto its site of origin from within the macromolecular structure of polypropylene. Most of the organic oxidation products are remarkably specific in terms of their genesis from the polymer. The structural results are discussed in terms of the oxidation chemistry of the macromolecule.     

Structural determination of a new 2(3 --> 20)abeotaxane with an unusual 13beta-substitution pattern and a new 6/8/6-ring taxane from Taxus cuspidata

A new 2(3 --> 20)abeotaxane with an unusual 13beta-substitution pattern and a new 6/8/6-ring taxane were isolated from the methanol extract of the needles of Taxus cuspidata. The structures were established as 2alpha,7beta-diacetoxy-5alpha,10beta,13beta-trihydroxy-2(3 --> 20)abeotaxa-4(20), 11-dien-9-one (1) and 2alpha,5alpha,7beta,9alpha,13alpha-pentahydroxy-10beta-acetoxytaxa-4(20),11-diene (2) on the basis of 1D and 2D NMR spectral data and high-resolution FAB-MS analyses.     

Photo‐induced surface transformations of silica nanocomposites

The photo‐induced, physicochemical surface transformations to silica nanoparticle (SiNP) ‐ epoxy composites have been investigated. The silica nanocomposites (SiNCs) were prepared using a two‐part epoxy system with a 10% mass fraction of SiNPs and exposed to varying doses of high intensity, ultraviolet (UV) radiation at wavelengths representative of the solar spectrum at sea level (290 nm to 400 nm) under constant temperature and humidity. Visibly apparent physical modifications to the SiNC surface were imaged with scanning electron microscopy. Surface pitting and cracking became more apparent with increased UV exposure. Elemental and surface chemical characterization of the SiNCs was accomplished through X‐ray energy dispersive spectroscopy and X‐ray photoelectron spectroscopy, while attenuated total reflectance Fourier transform infrared spectroscopy revealed changes to the epoxy's structure. During short UV exposures, there was an increase in the epoxy's overall oxidation, which was accompanied by a slight rise in the silicon and oxygen components and a decrease in overall carbon content. The initial carbon components (e.g. aliphatic, aromatic and alcohol/ether functionalities) decreased and more highly oxidized functional groups increased until sufficiently long exposures at which point the surface composition became nearly constant. At long exposure times, the SiNC's silicon concentration increased to form a surface layer composed of approximately 75% silica (by mass). Published 2012. This article is a U.S. Government work and is in the public domain in the USA.     

Atrazine and Parathion-Methyl Removal by UV And UV/O3 in Drinking Water Treatment

Abstract

The degradation of atrazine and parathion-methyl by UV-light in the presence of O₂(UV/O₂) and by a combination of UV-light and ozone in the presence of O₂(UV/O₂/O₃) was studied at a pilot plant for drinking water treatment. The photolysis rate of parathion-methyl increased with UV/O₂/O₃ compared to the treatment with UV/O₂ only, while the photodecomposition rate of atrazine was not enhanced by the UV/O₂/O₃ combination under the working conditions applied.

In field experiments with a large-scale plant the degradation of atrazine and desethylatrazine was studied at a drinking water supply. The applied ozone dose rates were smaller and the residence time of the liquid phase in the UV-reaction unit was shorter than in the pilot plant. The degradation rate of both atrazine and desethylatrazine increased with increasing ozone dose rates and increasing radiant power. At a continuous flow rate of 70 m³/h of contaminated raw water atrazine could be degraded below the threshold limit for pesticides (0.1[ugrave]g/L) at optimum operation conditions, whereas the resulting desethylatrazine concentration exceeded this limit. At a continuous flow rate of 30 m³/h desethylatrazine could be degraded below the threshold limit, too.     

Degradation of Microcystin-RR by Combination of UV/H2O2 Technique

The experiments were performed to investigate the degradation of microcystins in order to assess the effectiveness and feasibility of UV/H2O2 system for the disinfection of water polluted by microcystins. The influence factors such as H2O2, pH and UV light intensities were investigated respectively. Degradation of microcystin-RR （MC-RR） could be fitted by either the pseudo-first-order or second-order rate equations. This homogenous system could significantly enhance the degradation rate due to the synergetic effect between UV and H2O2. The degradation mainly followed the mechanism of direct photolysis and .OH oxidation reactions. Experimental results showed that 94.83% of MC-RR was removed under optimal experimental conditions and the UV/H2O2 system provided an alternative to promote the removal of microcystins in drinking water supplies.     

Investigation on structural changes of isotactic polypropylene mesophase in the heating process by using two-dimensional infrared correlation spectroscopy

Two-dimensional FT-IR correlation spectroscopy was used to reveal the structural changes of isotactic polypropylene(iPP) mesophase during the heating process.The co-relationship among the regular helical bands of iPP was discussed according to synchronous spectrum.The results show that the segments with different length-helixes were found to undergo a disordered process in the temperature range of 25-60 ℃.