Studies of surface properties of pure and modified by Mn<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript> ions of aluminium oxide samples using complex methods

Complex studies of physicochemical properties of pure and modified of aluminia oxides samples are presented. The presence of Mn²⁺ and Ni²⁺ modifiers on the aluminium oxide surface causes increase in water adsorption capacity and decrease in benzene and n-octane adsorption. This is due to decrease of specific surface area, volume and radius of pores as a result of surface impregnation and microcrystal formation during modification with manganese and nickel chlorides. Microcrystal formation on the surface and porosity decrease as confirmed by AFM, EDX and powder diffraction studies using automated diffractometer by step scanning. From the Q-TG and Q-DTG data, the energies of liquid desorption from the surface of the samples and the functions of desorption, energy distribution were calculated. High degree of nonlinearity of the functions resulting from great heterogeneity of the studied surface was found. Adsorption of cations creates more homogeneous surface in aluminium oxide, and it is responsible for the change in adsorbate molecule interaction energy and changes mechanism of adsorption and desorption as well as thickness and structure of the adsorbed film. From the experimental data some parameters characterizing adsorption properties and porosity of the studied samples were determined using the complex measuring methods (thermal analysis, sorptometry, porosimetry, AFM and EDX).     

Solid-phase extraction of Cu2+ and Pb2+ from waters using new thermally treated chitosan/polyacrylamide thin films; adsorption kinetics and thermodynamics

New biologically safe thin adsorptive films were synthesised using chitosan/polyacrylamide polymer blend (Ch/PA) via thermal crosslinking technique for the separation of Cu²⁺ and Pb²⁺ from aqueous solution and natural water samples. The prepared films were characterised using Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and Thermogravimetric analysis (TGA) techniques. Thermo-gravimetric analysis revealed an enhancement in the thermal stability of the prepared thin films with increasing polyacrylamide content. Kinetic and thermodynamic studies were evaluated by batch-type experiments. The obtained results indicated that the adsorption isotherms were well described by Freundlich model, and Ch/PA have adsorption capacities of 177.9 and 126.58 mg.g^?1 to Cu²⁺ and Pb²⁺, respectively. Under optimum conditions, calculated detection limits were as low as 0.018 and 0.034 μg.L^?1 for Cu²⁺ and Pb²⁺, respectively, and relative standard deviations of less than 4% for five separate experiments. Moreover, the traditional Lagergren adsorption kinetic model provided the best fitting for the kinetic data. Furthermore, the reusability studies revealed a decrease in the adsorption capacity by about 8% after three adsorption–desorption cycles. The prepared thin films were successfully applied for the separation of Cu²⁺ and Pb²⁺ from natural water samples.     

Influence of albumin adsorption on physico-chemical properties of alumina surfaces

The effect of albumin adsorption on neutral active aluminium oxide was investigated in the presence of polar and non-polar liquids. The adsorbed values were highest near the isoelectric point of albumin and varied in the range 5–10 and 3–11 mg g^–1 with phosphate buffer and potassium chloride respectively after 2 and 24 h. In the case of aluminium oxide the effect of albumin adsorption on total heterogeneity of adsorbents is not explicit. On the one hand, the modified samples showed decreasing surface area with increase of surface coverage with albumin. On the other hand, modifications under the same conditions but without albumin caused similar changes. These effects suggest the strong influence of medium pH on surface properties (due to surface polarization) and competitive co-adsorption of ions on the process. The volumetric fractal dimensions of the studied materials change in the range 2.25–2.32 for pure aluminium oxide and BSA modified from the phosphate solution. E _d,max values (desorption energy in the maximum of distribution function) diminish (in the range 40–45 kJ mol^–1) compared with pure aluminium oxide (E _d,max=52 kJ mol^–1) for water thermodesorption at modified surfaces to the increase of a number of active centers of hydrophobic character, and weakening of the adsorbent–adsorbate increases.     

Influence of aluminium precursor on physico-chemical properties of aluminium hydroxides and oxides Part II. Al(ClO4)3·9H2O

Aluminium hydroxide was precipitated during a hydrolysis of aluminium perchlorate in ammonia medium. The materials were studied with the following methods: thermal analysis, IR spectroscopy, X-ray diffraction, low-temperature nitrogen adsorption and adsorption–desorption of benzene vapours. Freshly precipitated boehmite had a high value of S_BET=211 m² g^–1 determined from nitrogen adsorption, good sorption capacity for benzene vapours, developed mesoporous structure and hydrophobic character. After prolonged refluxing at elevated temperature its crystallinity increased which was accompanied by an increase of specific surface determined from nitrogen adsorption up to 262m²g^–1 , decrease of sorption capacity for benzene vapours and stronger hydrophobic character. The calcinations of all boehmites at temperature up to 1200°C resulted in formation of à-Al₂O₃ via transition form of γ-, δ- and θ-Al₂O₃. The samples of aluminium oxides obtained after calcination at 550 and 900°C were characterised with high values of specific surface area of 205–220 and 138–153 m² g^–1 , respectively. The SBET values calculated for the oxide samples derived from aged hydroxides and calcined at 1200°C are higher than for the analogous sample prepared without the ageing step. It was concluded that the process of ageing at elevated temperature developed thermal stability of aluminium oxides.     

Studies of heterogeneity properties of selected high-temperature superconductor surfaces

Nitrogen adsorption measured at 77 K was used to characterize the surface heterogeneity of high-temperature superconductor surfaces. Properties relating to adsorption and porosity of the solids (adsorption capacity, specific surface area, radii and volume of the pores, pore-size distribution function) were determined from nitrogen adsorption–desorption isotherms and atomic force microscopy (AFM) for a series of oxide superconductors. It is shown that the adsorption isotherms of all samples are S-shaped and belong to type II according to the IUPAC classification. On the basis of the nitrogen adsorption isotherms and AFM data, fractal dimensions were determined and correlations found with adsorption and porosity parameters.     

Surface characterization and thermodynamics of adsorption of Sr2+, Ce3+, Sm3+, Gd3+, Th4+, UO 2 2+ on activated charcoal from aqueous solution

Surface parameters of the activated charcoal were measured using precise instrumental techniques for dehydration, carbon content, trace metals impurities, anions, bulk, tap and true densities, surface area, pore volume, porosity and average particle diameter. The adsorption of Sr²⁺, Ce³⁺, Sm³⁺, Gd³⁺, Th⁴⁺ and UO ₂ ²⁺ ions on activated charcoal from aqueous solution was studied as a function of temperature. Thermodynamic parameters such as HH ⁰ and S ⁰ were calculated from the slopes and intercepts of the linear variation of lnK ₁ vs. 1/T, whereK ₃ is obtained from Langmuir equation. The results show endothermic heats of adsorption, but negative free energy values indicate that the adsorption process of metal ions on activated charcoal is favored at high temperature. The value of isosteric heat of adsorption, calculated from the Clausius-Clapeyron equation, shows that the surface of the activated charcoal is heterogeneous with respect to activity. A wavelength dispersive x-ray fluorescence spectrometer was used for measuring the concentration of metal ions.     

Ce3+ adsorption on hydrated MnO2

The adsorption of Ce³⁺ on hydrated manganese dioxide (HMD) was studied as a function of concentration, temperature and pH of the cerium solution labelled with¹⁴¹Ce. The steady state values of cerium adsorption at various concentrations fit well with the classical Freundlich isotherm. The effect of temperature on equilibrium adsorption values was utilized to determine the change in the standard enthalpy ΔH ^o of the cerium uptake process and its value (ΔH ^o=10.57) indicates that the uptake process proceeds via ion exchange.¹⁴¹Ce desorption studies, from HMD in water, HCl and unlabelled CeCl₃ solution, confirmed the ion exchange nature of the cerium uptake process as well as its reversibility.     

Spectroscopic identification of adsorption properties of Zn2+ ions at cationic positions of high-silica zeolites with distant placing of aluminium ions

For Zn²⁺ cations in ZnZSM-5 zeolite unusual type of cationic positions, formed by two distantly placed framework aluminium atoms, is considered. Some extent of structural destabilization of cations in these cationic positions in comparison with traditional localization should result in promoted Lewis activity and adsorption activity of these sites. The last ones are manifested in the significantly increased IR low frequency shifts for adsorbed molecules and in their ability for heterolytic dissociation at elevating temperature. DFT cluster quantum chemical modeling of light alkane adsorption on Zn²⁺ in ZnZSM-5 zeolites confirms these conjectures in full agreement with recent experiments. Similar to the previously considered dihydrogen and methane molecule adsorption, we present here the calculations of ethane molecular and dissociative adsorption on these sites. It is shown that the unusually large ethane IR frequency shift recently observed in ZnZSM-5 zeolite can result from adsorptive interaction of C₂H₆ with Zn²⁺ stabilized in a cationic position with distantly placed aluminium ions. The dissociative adsorption of ethane molecules with the formation of bridged hydroxyl group and Zn–C₂H₅ structure is considered and an activation energy of ethylene formation from the alkyl fragment is evaluated.     

Adsorption of Cu2+ from aqueous solution onto iron oxide coated eggshell powder: Evaluation of equilibrium,isotherms, kinetics,and regeneration capacity

This study explored the adsorption behavior of Cu²⁺ onto iron oxide coated eggshell powder (IOESP) from aqueous solution. The effect of various operational parameters such as pH, contact time, initial adsorbate concentration, surfactant, and temperature on adsorption of Cu²⁺ ions was investigated using batch adsorption experiments. The optimum pH for Cu²⁺ adsorption was found to be 6.0. Kinetics of adsorption was found to follow the pseudo-second-order rate equation. The suitability of Langmuir and Freundlich adsorption models to the equilibrium data was investigated. The adsorption was well described by the Freundlich isotherm model indicating the presence of heterogeneous sites for Cu²⁺ adsorption. The adsorption of Cu²⁺ was increased in the presence of anionic surfactant (SDS) while cationic surfactant (CTAB) shows no significant change in adsorption capacity. Thermodynamic parameters showed that the adsorption of Cu²⁺ onto IOESP was feasible, spontaneous, and exothermic. Regeneration studies were performed using HCl, HCOOH, EDTA, and NaOH as eluting agent for Cu²⁺ desorption from saturated IOESP and the maximum regeneration was observed with HCl.     

Oxygen Sorption and Desorption Properties of Selected Lanthanum Manganites and Lanthanum Ferrite Manganites

Temperature‐programmed desorption (TPD) with a carrier gas was used to study the oxygen sorption and desorption properties of oxidation catalysts and solid‐oxide fuel cell (SOFC) cathode materials (La_0.85Sr_0.15)_0.95MnO_3+δ (LSM) and La_0.60Sr_0.40Fe_0.80Mn_0.20O_3‐δ (LSFM). The powders were characterized by X‐ray diffractometry, atomic force microscopy (AFM), and BET surface adsorption. Sorbed oxygen could be distinguished from oxygen originating from stoichiometry changes. The results indicated that there is one main site for oxygen sorption/desorption. The amount of sorbed oxygen was monitored over time at different temperatures. Furthermore, through data analysis it was shown that the desorption peak associated with oxygen sorption is described well by second‐order desorption kinetics. This indicates that oxygen molecules dissociate upon adsorption and that the rate‐determining step for the desorption reaction is a recombination of monatomic oxygen. Typical problems with re‐adsorption in this kind of TPD setup were revealed to be insignificant by using simulations. Finally, different key parameters of sorption and desorption were determined, such as desorption activation energies, density of sorption sites, and adsorption and desorption reaction order.     

Formation Mechanism of O2– Radical Anions in the Adsorption of NO + O2 and NO2 + O2 Mixtures on ZrO2 According to EPR and TPD Data

The effects of various factors on the formation of O₂ ^– radical anions in the adsorption of an NO + O₂ or NO₂ + O₂ mixture on ZrO₂ were studied. It was found that the thermal stability of the O₂ ^– species depends on the composition of the adsorbed gas. It was suggested that nitrogen oxide complexes on ZrO₂ centers are responsible for the formation of O₂ ^–. These centers are formed upon the treatment of the oxide in a vacuum; however, they are different from both coordinatively unsaturated Zr⁴⁺ cations (NO adsorption centers at 77 K) and Zr⁴⁺–O^––O^––Zr⁴⁺ centers, at which O₂ ^– are formed because of the adsorption of H₂ + O₂. Based on the experimental data, the mechanism of O₂ ^– formation in the adsorption of an NO + O₂ mixture is discussed.     

Radiation Stability of Copper Films under Irradiation with He<Superscript>2+</Superscript> Ions

The effect of irradiation of copper films with low-energy He²⁺ ions on their structural properties has been studied. The surface morphology and structural properties of the samples before and after irradiation have been examined by scanning electron microscopy, energy dispersive analysis, and X-ray diffraction. Bombardment of the initial samples with He²⁺ ions at a fluence of 1 × 10¹⁶ion/cm² alters the surface morphology of copper films and leads to the formation of nanoscale inclusions of hexagonal shape. An increase in the fluence to 1 × 10¹⁷ ion/cm² and higher results in the formation of cracks and amorphous oxide inclusions on the sample surface.     

Theoretical study of the atrazine pesticide interaction with pyrophyllite and Ca2+‐montmorillonite clay surfaces

Atrazine, a pesticide belonging to the s‐triazine family, is one of the most employed pesticides. Due to its negative impact on the environment, it has been forbidden within the European Union since 2004 but remains abundant in soils. For these reasons, its behavior in soils and water at the atomic scale is of great interest. In this article, we have investigated, using DFT, the adsorption of atrazine onto two different clay surfaces: a pyrophyllite clay and an Mg‐substituted clay named montmorillonite, with Ca²⁺ compensating cations on its surface. The calculations show that the atrazine molecule is physisorbed on the pyrophyllite surface, evidencing the necessity to use dispersion‐corrected computational methods. The adsorption energies of atrazine on montmorillonite are two to three times larger than on pyrophyllite, depending on the adsorption pattern. The computed adsorption energy is of about −30 kcal mol⁻¹ for the two most stable montmorillonite‐atrazine studied isomers. For these complexes, the large adsorption energy is related to the strong interaction between the chlorine atom of the atrazine molecule and one of the Ca²⁺ compensating cations of the clay surface. The structural modifications induced by the adsorption are localized: for the surface, close to substitutions and particularly below the Ca²⁺ cations; in the molecule, around the chlorine atom when Ca²⁺ interacts strongly with this basic site in a monodentate mode. This study shows the important role of the alkaline earth cations on the adsorption of atrazine on clays, suggesting that the atrazine pesticide retention will be significant in Ca²⁺‐montmorillonite clays. © 2016 Wiley Periodicals, Inc.     

Influence of Different Microplastic Forms on pH and Mobility of Cu2+ and Pb2+ in Soil

Microplastics, due to their surface properties, porosity and electrostatic interactions have a high affinity for cations sorption from the aqueous phase. As soil is a complex matrix, interactions between microplastics, soil constituents and heavy metals (HM) may modify the soil microenvironment for heavy metal mobilization/immobilization processes. In order to better understand the problem, three commonly found forms of microplastics in soil (fibers, fragments and microbeads) were mixed with Cu²⁺- or Pb²⁺-contaminated soil and incubated at 22 °C for 180 days. In soil samples pH and the content of water and acid exchangeable species of metals were analyzed. The results of this study showed that the presence of microplastics in HM-contaminated soil affected metal speciation, increasing the amount of easily exchangeable and potentially bioavailable forms of Cu²⁺ or Pb²⁺ in the tested soil. Soil pH also increased, confirming that microplastic particles affect soil properties relevant to the sorption/desorption process of metal cations. Overall, the smallest microplastic particles (≤1 mm), such as fibers or glitter microbeads, had a greater impact on the change in the sorption and desorption conditions of metals in tested soil than larger particles. The findings of our study show that microplastic form, shape and size should be considered as important factors that influence the soil properties and mobility of heavy metals in soil.     

Synthesis and characterisation of a silicon oxide film solid-phase extraction system for lead traces determination: an all the way green analytical method

In this work, an all the way green analytical procedure based on a silicon oxide film-solid phase extraction system is proposed for lead traces determination. From the synthesis of a solid phase extraction (SPE) system and throughout the metal preconcentration and determination only aqueous media were employed. Characterisation of the film was carried out by Scanning Electron Microscopy and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy. Preconcentration conditions, prior to Pb(II) Electrothermal Atomic Absorption Spectrometry (ETAAS) determination, such as adsorption and desorption time, pH and temperature, were optimised. Langmuir, Freundlich and Dubinin-Radushkevich isotherm models were analysed along with the evaluation of adsorption energy and standard free energy (ΔG ⁰). The greatest adsorption was obtained with incubation at pH 7 and 37°C. By using a small volume of 0.5?mol?L^?1 HNO₃ (0.5?mL) lead was desorbed from the silicon oxide film after 2?h incubation, generating low amount of waste. The films showed better adjustment for the Langmuir model (R^{2 ?}=?0.989). The detection limit (3.29σ) for Pb(II) was 0.228?µg?L^?1. The developed procedure is 10-fold more sensitive in comparison to direct ETAAS determination. Recovery values from soft tap-water and soft well-water were above 95%. When hard water was analysed, Pb(II) adsorption was found to be interfered by Mg²⁺ and Ca²⁺. After five preconcentration cycles relative recovery was found not to decay below 90%, indicating that the silicon oxide film could be used for multiple lead determinations.     

Adsorption of Co2+ and Zn2+ on cryptomelane-type hydrous managese dioxide

Co²⁺ and Zn²⁺ ions are adsorbed on cryptomelane-type MnO₂ by exchange with surface protons and with structural ions (probably K⁺ and/or Mn²⁺) in the oxide. The latter sites are responsible for the much higher capacity to these cations, compared to Na⁺. At all pH values, two straight lines expressing the presence of mainly two groups of sites with distinctly different adsorption energies are located in the Langmuir plots for both Co²⁺ and Zn²⁺. The apparent capacities of the two groups increase with the increase of pH, indicating the involvement of protons in the adsorption process over the whole concentration range. The higher Co²⁺ capacity at relatively low pH, compared to the Zn²⁺ capacity, is probably due to a more exchange with the structural ions. Crytomelane type MnO₂ seems to be a quite heterogenous ion adsorbent whose adsorption sites could be approximated to two groups only.     

Physico-chemical properties of metallosilicate supports and cobalt catalysts based on them

The specific surface and the porosity of silicate supports (SiO₂, ZrO₂ · SiO₂, CoO · SiO₂) were determined. The adsorption properties and the reducing ability of the catalysts containing 10 % Co were studied. The spectra of the thermo-programmed desorption of CO below 250°C possess two signals typical of the adsorption of the catalyst on the oxide and metal phases. The formation of liquid hydrocarbons from CO and H₂ is assumed to proceed at surface bifunctional centers.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 668–672, April, 1993.     

Studies of Hg2+ adsorption and desorption by mesocellular foams silica

MCFs (mesocellular foams) silica, a mesoporous material, was synthesized by the hydrothermal method using tri-block copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (Pluronic P123, EO₂₀-PO₂₀-EO₂₀) as a structuring agent and 1, 3, 5-trimethylbenzene as a pore-expanding agent and the product was characterized by powder X-ray diffraction and scanning electron microscopy. The prepared MCFs was employed as the adsorbent for a study of the adsorption of Hg²⁺. The adsorptive experimental results showed that the optimal adsorptive conditions were: pH = 5.0, MCFs amount 0.10 g, temperature 20°C, and adsorption time 40 min, when the initial concentration of Hg²⁺ is 1.0 mg mL^?1. The maximum adsorptive amount of Hg²⁺ was 124.5 mg Hg²⁺ g^?1 MCFs. The desorption studies found that the best desorbing agent is 0.10 M hydrochloric acid. The highest desorption rate of 80.61 % could be reached at a desorption duration of 3 h. The cost of the adsorbent used in this study is lower than that of activated carbon with a higher value of application.     

Semi-empirical and ab initio quantum chemical characterisation of pyridine derivatives as HCl inhibitors of aluminium surface

Quantum chemical methods are becoming ever more prevalent for assessing surface interactions of different molecules using cluster models and semi-empirical, ab initio Hartree–Fock and density functional theory (DFT) studies considering the standard potential energy surfaces. Examination of the efficacy of some pyridine derivatives to counter aluminium corrosion in hydrochloric acid using ab initio and semi-empirical quantum chemical deductions and its comparison with the available experimental data forms the basis of this research. It is believed that the inhibition efficiency has lucid correlation with the total energy of inhibitor molecules and highest occupied molecular orbital energy levels calculated by DFT study methods and thus the adsorption energy for the pyridine on Al₁, Al₅, Al₁₄, Al₁₈ and Al₂₆ clusters are determined to assess the convergence of the results with respect to size of the cluster. Subsequently, Al₂₆ is used for the inhibitor/aluminium cluster interface investigations. Results highlight the reaction between pyridine molecules and appropriately active sites such as corners and steps or kinks and screw dislocations towards which pyridine molecules are attracted as is evident from a three times rise in adsorption energy from (−35) to (−107) kJ mol⁻¹. Therefore, inhibition mechanism is primarily associated with local properties. Interactions take place between the surface defect and the nitrogen group of the pyridine molecule however, the possibility of ion pair formation between protonated pyridine and chloride ion and its influence on the general adsorption of pyridine on aluminium is also examined. The interaction energies of pyridine and aluminium cluster with the natural bond orbital are also reported.     

Identifying the O2 diffusion and reduction mechanisms on CeO2 electrolyte in solid oxide fuel cells: A DFT + U study

The interactions and reduction mechanisms of O₂ molecule on the fully oxidized and reduced CeO₂ surface were studied using periodic density functional theory calculations implementing on‐site Coulomb interactions (DFT + U) consideration. The adsorbed O₂ species on the oxidized CeO₂ surface were characterized by physisorption. Their adsorption energies and vibrational frequencies are within ?0.05 to 0.02 eV and 1530–1552 cm^?1, respectively. For the reduced CeO₂ surface, the adsorption of O₂ on Ce⁴⁺, one‐electron defects (Ce³⁺ on the CeO₂ surface) and two‐electron defects (neutral oxygen vacancy) can alter geometrical parameters and results in the formation of surface physisorbed O₂, O₂^a? (0 < a < 1), superoxide (O₂^?), and peroxide (O₂^2?) species. Their corresponding adsorption energies are ?0.01 to ?0.09, ?0.20 to ?0.37, ?1.34 and ?1.86 eV, respectively. The predicted vibrational frequencies of the peroxide, superoxide, O₂^a? (0 < a < 1) and physisorbed species are 897, 1234, 1323–1389, and 1462–1545 cm^?1, respectively, which are in good agreement with experimental data. Potential energy profiles for the O₂ reduction on the oxidized and reduced CeO₂ (111) surface were constructed using the nudged elastic band method. Our calculations show that the reduced surface is energetically more favorable than the unreduced surface for oxygen reduction. In addition, we have studied the oxygen ion diffusion process on the surface and in bulk ceria. The small barrier for the oxygen ion diffusion through the subsurface and bulk implies that ceria‐based oxides are high ionic conductivity at relatively low temperatures which can be suitable for IT‐SOFC electrolyte materials. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2009