基于线阵CCD的空间相机实时检焦系统研究

实时精密检调焦技术是空间相机必不可少的重要组成部分,它直接影响相机的成像质量。如何对焦面位置进行检测是精密检调焦技术的核心。基于线阵CCD的空间相机实时检焦系统是用线阵CCD作为光采样元件,结合特殊设计的精密自准直检焦光学系统,实现对空间相机焦面位置的精确检测,并通过实验验证,达到较为理想的结果。     

一种用于长焦距、大孔径空间相机的实时检焦系统

为了对空间相机实时进行检调焦 ,提出了一种自准直法精密检焦系统 ,该方法利用五棱镜代替大平面反射镜 ,用CCD为光电转换器件 ,用半导体激光器做光源 ,结构紧凑 ,稳定可靠。通过相关数据处理和拟合技术 ,提高了检焦系统的分辨率。实验结果表明该方法能够达 5 μm以内的检测精度 ,并具有调整方便以及较好的实时性等优点。     

遥感相机自动检焦技术研究

将基于图像处理的自动检焦技术应用于线阵CCD推扫成像的空间遥感相机中。图像法检焦的关键在于对焦评价函数的选取。通常对焦评价函数是在摄影目标不变的情况下得出的,而推扫成像的线阵CCD相机在任意时刻所拍摄的景物都是不同的,这就给对焦评价函数的选取增加了难度。用功率谱的方法对任意景物在空间频域进行分析表明,功率谱对于自然景物具有一定的不变性。由此建立了基于功率谱的对焦评价函数,采用小波去噪与亮度归一化相结合的图像预处理技术有效地去除了图像噪声和亮度变化对对焦精度的影响。通过对功率谱评价函数进行加权处理,提高了对焦评价函数曲线的灵敏度。仿真实验表明了所构造的对焦评价函数是可行的。     

功率谱在高分辨率遥感相机检调焦中的应用

检调焦是高分辨力遥感相机得到高质量图像的关键技术之一。线阵CCD遥感相机在推扫过程中地面景物不断变化,而一般的图像清晰度评价函数只能在相同的图像内容下作比较来判断系统是否合焦。在介绍了遥感相机离焦原因及常用检调焦方法的基础上,用遥感图像验证了图像的功率谱对自然景物具有一定的不变性,分析了将其用于相机检调焦的可行性。实验表明,在系统合焦时,不同图像的功率谱值基本相同;而系统离焦时,功率谱值随着离焦程度的增加而逐渐减小,以此提出了以两幅不同图像功率谱的比值作为CCD遥感相机调焦的评价函数。     

激光共焦球面元件姿态自动调整系统

为解决激光差动共焦元件参数测量系统中人工调整元件姿态效率低、重复性差的问题，研制了激光共焦球面元件姿态自动调整系统。基于共焦原理，建立了元件失调量与电动四维调整机构调整量关系的数学模型，并根据CCD探测器实时获取的光斑位置信号分析出被测件的姿态信息，结合闭环反馈控制算法实现姿态自动调整。利用电动四维调整机构搭建了自动调整实验装置，实验结果表明:研制的电动调整机构平移调整分辨力达到0.5 μm，倾斜调整分辨力达到8″；调整系统能够快速、稳定地将被测件姿态失调量调至误差范围内，有效提高调整重复性及效率，对激光差动共焦测量系统实现全自动球面元件参数检测格外重要。     

基于差动调制度解析的同轴检焦方法

针对现有同轴检焦方法如临界角法、博科刀口法、针孔法以及像散法等容易受光强变化的影响,且对系统装调有较高要求的问题,提出一种基于差动调制度解析的同轴检焦方法。通过物理光栅对成像空间进行编码,并采用傅里叶变换解析经基片高度调制后的编码图像调制度分布,结合差动探测系统实现对基片高度的精确测量。理论与实验表明,采用数值孔径为0.9、放大倍率为100的物镜,检焦精度优于10 nm。本文所提的检焦方法无需复杂光学元件,具有结构简单、测试精度高等优点,将为新型光刻技术提供一种新的高精度同轴检焦手段。     

航天CCD相机焦面位置地面标定方法研究

为了在地面试验阶段准确标定出航天CCD相机在轨成像时的像面位置,提出了一种基于自准直干涉测量原理和调制传递函数测量原理的航天CCD相机焦面位置的地面标定方法。介绍了该方法的原理和实施过程,并以口径1 m、焦距20 m的平行光管标定口径600 mm、焦距6 m的航天CCD相机为例,分析并计算了新标定方法和已有标定方法的标定精度。结果表明:新标定方法的标定精度优于0.006 mm,是已有标定方法标定精度的5倍至10倍,能够满足现阶段所有航天CCD相机的焦面位置的标定精度要求。     

空间光学遥感器CCD焦面组件热设计

空间光学遥感器CCD焦面组件的热控工作旨在保证CCD器件所需温度水平和温度梯度,以满足遥感器高质量成像要求。分析了CCD焦面组件的工作模式与热控要求,遵循"被动热控为主,主动热控为辅"的热控制策略,提出了CCD焦面组件的热设计方法。在此基础上通过Sinda/G和TMG软件进行了计算机仿真,验证了热设计的正确性,对各类空间光学遥感器CCD焦面组件的热设计有一定的指导和借鉴作用。     

基于共焦腔的激光器纵模测量实验装置

根据谐振腔的理论,利用共焦腔扫描干涉仪,制作了激光器纵模测量装置,使用该装置可以演示和简单测量He-Ne激光器的纵模.     

应用共焦显微镜原理测量倾斜工程表面

用基尔霍夫衍射公式分析反射式共焦光路 ,得到了被测件有一定倾斜角度表面的共焦轴向响应理论模型。由菲涅耳衍射近似公式得到的共焦轴向响应特性只是它的理论模型的一个特例。同时 ,对接收端采用差动连接的共焦测量的聚焦瞄准信号进行了分析 ,得到了表面倾斜角对聚焦瞄准信号影响的关系。应用共焦实验系统及差动测量系统对具有不同倾角的块规斜面的轴向响应信号进行了测量。理论模型的数值分析与实验结果相吻合。用差动共焦光学系统作为瞄准传感器、用电容传感器进行位移监测 ,对倾角为 10°的角规的斜面进行测量 ,得到分辨率小于 2 0nm的表面形貌图。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.