Localisation of fringes in moiré topography

The moiré pattern produced by two separate gratings is characterised by a fringe localisation phenomenon. A theory based on the geometric shadow of light can account for the spatial location of moiré fringes in topographical applications. The fringe location depends on the optical arrangement of the system and also on the surface slope of the specimen. Experimental results are introduced into practical usage.     

Computer Aided Moiré Methods

Computer aided moiré methods (CAMM) use the versatility of the computer to manipulate gratings rapidly, the basis of all moiré methods. Application of CAMM to moiré teaching, in-plane moiré, shadow and projection moiré and reflection moiré are reviewed in this paper.     

Investigation of dynamic displacements of lithographic press rubber roller by time average geometric moiré

Geometric moiré fringe formation method is a classical well-established experimental technique with numerous practical applications. This paper proposes the application of time-average geometric moiré analysis for the determination of dynamic displacements of the lithographic press rubber roller. This optical measurement technique is a natural extension of double-exposure geometric moiré for the identification of dynamic displacements of vibrating elastic structures. Experimental investigations prove the validity and effective practical applicability of the method.     

Electron moiré method and its application to micro-deformation measurement

In this paper, the single and two deposited metal layers method were proposed to produce the model grating for electron moiré method. The measurement principle of electron moiré method and the techniques for manufacturing model grid are expounded in detail. The accuracy of measuring strain using this method is discussed. The gratings with single deposited layer and two deposited layers with high frequency up to 5000 lines/mm were produced on different substrates. From the experimental results, both single deposited metal layer and two deposited metal layers gratings showed their heat resistance ability. Using the gratings produced and a replicated model grid, the electron moiré method was applied to measure the deformation of the strain around holes in a polyimide resin substrate, thermal strain of electronic packaging component and tensile creep around grain boundary in a pure copper specimen.     

A study on the digital moiré technique with circular and radial gratings

A digital moiré technique with circular and radial gratings is proposed to measure in-plane displacement and strain distributions of soft materials in a polar coordinate system. By introducing the coordinate-transform technique, the concentric circles and radial lines in the Cartesian coordinate system are converted to cross gratings in a polar coordinate system. Then, the digital moiré fringes are generated using logical and filter operations on the one-bit binary images. Finally, the in-plane displacement distributions are obtained by means of the four step phase-shifting procedure. Also, the measurement principles and the basic procedures of the new digital moiré technique are explained in detail. An application for rubber sheet with a single-edge crack is studied, and the experimental results show that the presented method is feasible.     

A moiré method of visualizing electromagnetic force lines

We propose a simple moiré method of visualizing electromagnetic force lines. The indicial equation is first derived for the tangent (or normal) curve to the electric field (or magnetic induction) around two parallel-line charges (or currents). The derived equation is then shown to have a one-to-one correspondence with that of the moiré fringe formed by two overlapped radial gratings. Since the tangent (or normal) curve to the electric field (or the magnetic induction) corresponds to the direction of the electric (or magnetic) force on a test charge (or current), the radial grating moirés can be used for the visualization of electric (or magnetic) force lines.     

Moiré fringes

This review paper clarifies the characteristics of the incoherent-and-multiplicative type moiré fringe phenomenon, presents examples of the application of these characteristics to measurement and explains the profile prediction method and the sharpening conditions of moiré fringes formed by two binary gratings.     

Moiré fringes as two-dimensional autocorrelation of transmission function of linear gratings and its application for modulation transfer function measurement

In this work, we show that the transmission moiré pattern is two-dimensional autocorrelation of transmission function (2D-ACTF) of two superimposed linear gratings that make a small angle with each other. In this approach, the properties of moiré fringes vs. the relative displacement of the gratings are formulated. By measuring 2D-ACTF of two similar gratings, we evaluate the modulation transfer function (MTF) of the gratings’ generating system. This work is the generalized form of our previous works. The implied MTF measurement method is easier and faster than our previous methods.     

Realization of high sensitivity displacement field from moiré interferometer with rough phase shifting mechanism and pattern matching technique

In this study, phase shifting method is used to modify moiré system into micro moiré interferometer which can measure displacement field with highly improved sensitivity. Apart from existing micro moiré technique, a low cost and less precise translation stage with rough resolution (10 μm resolution) is adapted for the phase shifter. Least square algorithm is applied to estimate the arbitrary phase shifted amount and to minimize the errors induced by lowering the cost. Moreover, specimen grating is phase shifted instead of reference grating which enables simple construction from given moiré system. To compensate for rigid body in-plane translation of specimen that may occur during phase shifting, pattern matching algorithm is put into practice to ensure pixel correspondence for each phase shifted images. To verify the newly constructed micro moiré technique, local displacement fields of Fine pitch Ball Grid Array package and Wafer Level Chip Size Package with elevated sensitivity up to 26 nm per fringe was acquired.     

The phase shift method applied to cross grating moiré measurements

The automatic evaluation of the grating deformation in a moiré image is greatly enhanced by the phase shift method. Based on three or more local grey values of a related number of phase shifted moiré patterns, the local displacement of a deformed grating against a reference grating, and hence the total displacement in one direction, is calculated. In this paper an extension to cross gratings is presented yielding a two- dimensional displacement field.     

Refractive power mapping of progressive power lenses using Talbot interferometry and digital image processing

A method of refractive power mapping of a lens is presented which is based on Talbot interferometry and utilizes a digital image processor. By adding a digital image processing system, fast measurement of a lens power distribution is feasible. A test lens is placed in front of two collinearly arranged gratings. The light passing through the test lens produces a shifted Talbot image of the first grating on the second grating and generates moiré fringes. Given the inclination angle of moiré fringes, the refractive power of the lens can be calculated. The calculation is performed using a digital image processor. This method is effective in finding the refractive power distribution of progressive power lenses.     

Experimental tire mechanics by moiré

Tires and their component parts are made from various low modulus rubbers and cord/rubber laminates. In service they typically undergo large deformations of about 1–30%. The accurate measurement of these deformations by either pointwise (strain gage) or full-field (optical) techniques is rendered difficult in these circumstances. Ordinary strain gages reinforce these soft structures and inhibit their deformation, whereas most optical methods are too sensitive to measure large motions. These difficulties can be overcome by the judicious use of various moiré methods: moiré interferometry, geometric moiré and shadow moiré.Several applications of moiré methods to tire mechanics problems are presented. The emphasis is on the range of problems that has been successfully approached and on the results obtained. Examples are drawn from work on belt-edge strains, tread groove strains, sidewall strains, dynamic sidewall deformations and material properties determination. Proprietary details of technique are not included.     

Contribution to analysis of the reflection grating method

The reflection grating method is a special case of the well-known reflection moiré principle. Whereas this moiré effect is suitable for measurement of the slope and curvature of deformed object surfaces by superposition of at least two grating images, the same results can be determined using only one reflected grating image without moiré lines.Some fundamental relationships between grating lines, optical setup and the desired deformation are developed and compared with the simplifications that are known from the moiré principle. The theory is tested using a circular plate, uniformly loaded and clamped at the circumference.     

Holographic displacement analysis using wave front modulation techniques

The wave fronts from two holographic displacement patterns are modulated by equal but opposite plate rotations and are superimposed to form a moiré pattern. Displacement information contained in the Fraunhofer diffraction pattern of the two superimposed gratings is analysed, and spatial filtering techniques are used to isolate full-field projections of displacement along and normal to the line of sight. Experimental results taken from a pipe subjected to pure torsion show that the method is not only accurate but that the technique is applicable to curved surfaces.     

Application of moiré technique to the measurement of modulation transfer functions (MTF) of printing systems

It is shown theoretically and verified experimentally that by writing a low spatial frequency Ronchi grating by a computer and printing two copies of it on two transparencies by a printer, the modulation transfer function (MTF) of the printed image can be evaluated by measuring the transmittance of the superimposed gratings in a moiré fringe spacing. Application of the technique is quite simple and the results are reasonably reproducible. The technique does not require a high sensitive intensity detector and a very narrow slit for transmission scanning. Also, the presented technique can be applied to other imaging systems.     

Novel method for testing the long focal length lens of large aperture

In this paper, we present a novel method for testing the long focal length lens of large aperture, which is realized by calculating the angle of moiré fringe formed by Talbot image of two Ronchi gratings. A scanning method was developed to measure the focal length with the collimated lights projected on the different aperture position of the lens. Experiment data demonstrates that this method can be applied to the real-time long focal length measurement with high accuracy.     

Flow visualization by an improved double exposure method in holography

Some optical differential interferometric techniques were investigated in order to measure the density distribution in the air jet flow of a small scale flow cell while excluding the effects of the optical distortion of its glass windows. A technique using moiré fringe formation by rotating the reference wave in one exposure of the double exposure method was found to be most suitable for this purpose. High contrast and multiplication of moiré fringes can be obtained by a moiré fringe sharpening and multiplication method.     

Automatic fringe analysis for moiré topography

Two digital systems are developed for the automatic measurement of 3-D shapes using moiré techniques—an automatic 3-D shape measuring system using the scanning moiré method and an interactive fringe analysing system for moiré fringe photographs. In the automatic 3-D shape measuring system, a deformed grating is scanned and sampled with an electronic image scanning device so that moiré fringes are generated in a computer. This technique of electronic fringe generation eliminates ambiguity with regard to the sign of the moiré fringes. The interactive fringe analyser provides a flexible and versatile tool for moiré fringe analysis. Medical applications of these analysing systems are discussed.     

Phase shifting nano-moiré method with scanning tunneling microscope

In this paper, a new nano-moiré method using scanning tunneling microscope (STM) is proposed. This method is capable of measuring nanoscopic deformation of matter. The formation mechanism of the STM moiré fringe and the phase shifting technique used in STM moiré fringes are explained in details. Typical experiments are conducted with the crystal lattices of freshly cleaved highly oriented pyrolytic graphite, are used as specimen grating, to generate STM moiré fringe patterns. Phase shifting is realized in four steps from 0 to 2π by controlling the PZT in the STM system to shift the specimen in the vertical direction. This method provides a new way for disposal of moiré fringes pattern in the nano-moiré measurement.