Natural Vibrations of a Cylindrical Shell Reinforced with Two-Layer Rings

The vibrations of a cylindrical shell reinforced with ring ribs attached to the shell by means of elastic elements are studied. The problem is solved by the finite-element method. The shell and ribs are modelled by a plane four-node finite element, which is a combination of a four-node plane stress element and a four-node flexural element. The effect of the stiffness of the elastic elements on the natural frequencies and modes is examined __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 8, pp. 105–110, August 2005.     

Natural Vibrations of Ribbed Cylindrical Shells with Low Shear Stiffness

A technique is proposed to determine the natural frequencies of rib-reinforced cylindrical shells with low shear stiffness. The equations of motion based on the Timoshenko model are used. The influence of the transverse shear moduli of the shell and ribs on the minimum natural frequencies and corresponding modes is studied by way of numerical examples. It is shown that the effect of the discrete ribs is different from that predicted by the classical theory of ribbed shells__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 4, pp. 66–74, April 2005.     

Nonlinear Vibrations of a Cylindrical Shell Containing a Flowing Fluid

The Bogolyubov-Mitropolsky method is used to find approximate periodic solutions to the system of nonlinear equations that describes the large-amplitude vibrations of cylindrical shells interacting with a fluid flow. Three quantitatively different cases are studied: (i) the shell is subject to hydrodynamic pressure and external periodical loading, (ii) the shell executes parametric vibrations due to the pulsation of the fluid velocity, and (iii) the shell experiences both forced and parametric vibrations. For each of these cases, the first-order amplitude-frequency characteristic is derived and stability criteria for stationary vibrations are established__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 4, pp. 75–84, April 2005.     

The Subharmonic Bifurcation of a Viscoelastic Circular Cylindrical Shell

In this paper the nonlinear dynamic behavior of a viscoelastic circular cylindrical shell under a harmonic excitation applied at both ends is studied. The modified Flugge partial differential equations of motion are reduced to a system of finite degrees of freedom using the Galerkin method. The equations are solved by the Liapunov–Schmidt reduction procedure. In order to study 1/2 and 1/4 subharmonic parametric resonance of the shell, the transition sets in parameter plane and bifurcation diagrams are plotted for a number of situations. Results indicate that, for certain static loads, the shell may display jumps due to the presence of dynamic periodic load with small amplitude. Additionally, different physical situations are identified in which periodic oscillating phenomena can be observed, and where 1/4 subharmonic parametric resonance is simpler than the 1/2-one.     

纵横加肋圆柱壳的应力分析

建立了一种纵横加肋圆柱壳有限元分析的正确的力学模型,通过大量数值计算,论证了纵骨尺寸,纵骨间距对壳体应力状态的影响,提出了一种等效各向同性壳的近似解析公式,为开展纵横加肋圆柱壳的结构设计打下了良好的基础。     

Forced Nonstationary Vibrations of a Sandwich Cylindrical Shell with Cross-Ribbed Core

The equations of nonaxisymmetric vibrations of sandwich cylindrical shells with discrete core under nonstationary loading are presented. The components of the elastic structure are analyzed using a refined Timoshenko theory of shells and rods. The numerical method used to solve the dynamic equations is based on the integro-interpolation method of constructing finite-difference schemes for equations with discontinuous coefficients. The dynamic problem for a sandwich cylindrical shell under distributed nonstationary loading is solved with regard for the discreteness of the core__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 2, pp. 60–67, February 2005.     

Natural vibrations of a cantilever thin elastic orthotropic cylindrical shell

The natural vibrations of a cantilever thin elastic orthotropic circular cylindrical shell are studied. Dispersion equations for the determination of possible natural frequencies of cantilever closed shells and open shells with Navier hinged boundary conditions at the longitudinal edges are derived from the classical dynamic theory of orthotropic cylindrical shells. It is proved that there are asymptotic relationships between these problems and the problems for a cantilever orthotropic strip plate and for a cantilever rectangular plate and the eigenvalue problem for a semi-infinite closed orthotropic cylindrical shell with free end and for the same but open shell with Navier hinged boundary conditions at the longitudinal edges. A procedure to identify types of vibrations is presented. Orthotropic cylindrical shells with different radii and lengths are used as an example to find approximate values of the dimensionless natural frequency and damping factor for vibration modes __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 5, pp. 68–91, May 2008.     

Vibrations of a Semiinfinite,Orthotropic, Cylindrical Shell of Open Profile

Natural vibrations localized at the free edge of a semiinfinite, elastic, orthotropic, circular cylindrical shell of open profile are studied. The cylinder is hinged along the bounding generatrices. Dispersion equations are derived from the classical equations describing the dynamic equilibrium for orthotropic cylindrical shells. It is established that these dispersion equations and the dispersion equations for a semiinfinite orthotropic plate strip are in an asymptotic relationship. A procedure for analysis of the possible types of vibrations at the free edge of the cylinder is described. Approximate values of the dimensionless natural frequency and damping factor are determined for shells of different radii     

On Free Nonlinear Vibrations of Fluid-Filled Cylindrical Shells with Multiple Natural Frequencies

Nonlinear free vibrations of a cylindrical shell fully filled with a perfect incompressible fluid are studied. The case is examined where two natural frequencies of the shell are close __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 10, pp. 127–138, October 2005     

Vibrations of a corrugated orthotropic cylindrical shell with free edges

The natural vibrations of a corrugated elastic orthotropic cylindrical shell with a directrix perpendicular to its edges that are free are examined __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 12, pp. 97–114, December, 2006.     

Stress Distribution in a Composite Cylindrical Shell with a Large Circular Opening

The stress–strain distribution in a composite deep cylindrical shell is analyzed. The shell is weakened by a circular opening and loaded by an axial force. The problem is solved by the variational difference method. The analysis is carried out for an orthotropic shell with low shear stiffness     

导电圆柱薄壳的热磁弹性效应分析

研究了磁场环境中受机械载荷作用的导电圆柱薄壳的热磁弹性问题．首先,根据电动力学方程和广义Ohm定律,得到了导电薄壳电流密度的分布,考虑到Joule热效应及热平衡方程,得到了导电薄壳的温度分布．其次,通过几何方程、物理方程、运动方程和电动力学方程导出了导电薄壳在机械场、电磁场以及温度场作用下的基本方程．最后,采用差分法及准线性化方法,得到了可以应用离散正交法求解的准线性微分方程组．对于导电圆柱薄壳,得到了Lorentz力表达式,并且推导了温度场积分特征值．讨论了导电圆柱薄壳应力、温度及变形随外加电磁参量的变化规律,并通过实例证实了可以通过改变电、磁、力场的参数来实现对薄壳的应力、应变、温度的控制．     

Stability and vibrations of nonclosed circular cylindrical shells reinforced with discrete longitudinal ribs

The paper gives exact solutions to the stability and vibration problems for nonclosed circular cylindrical shells hinged along the longitudinal edges and reinforced with a regularly arranged discrete longitudinal ribs. These problems are also solved approximately in the cases of regularly and quasiregularly arranged ribs __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 1, pp. 20–27, January 2008.     

On the Interaction of Closely Spaced Circular Openings in a Transversely Isotropic Shallow Cylindrical Shell

A transversally isotropic shallow cylindrical shell with two different circular openings under axial tension is examined. The centers of the openings are aligned along a generatrix. Stresses are evaluated by finding an approximate analytical solution to differential equations of a two-dimensional shell theory that takes transverse shears into account. The results are compared with those obtained by the finite-element method     

激光辐照下充压柱壳失效的三维离散元模拟

应用三维离散元方法模拟了充压柱壳在激光辐照下的破坏过程。结果表明 ,在较低功率密度和较大光斑情况下 ,光斑中央产生裂纹并沿轴向扩展引起破坏。在高功率密度和小光斑情况下 ,则产生中央穿孔破坏。对于铁合金 ,当材料的延展性较大时 ,可能产生第三种破坏形式 ,即在数十微秒量级产生较大面积的整体粉碎性爆裂。模拟结果与实验对比吻合较好。     

Natural vibrations of a cylindrical shell reinforced with rectangular plates

This paper outlines a technique of determining the natural frequencies and modes of an elastic structure consisting of a cylindrical shell and noncrossing rectangular plates inserted into it. The influence of the position, number, and thickness of the plates on the natural frequencies and modes is analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 3, pp. 89–96, March 2006.     

On Modes of Flexural Vibrations of Initially Bent Cylindrical Shells Partially Filled with a Liquid

Flexural modes are determined for initially bent cylindrical shells partially filled with a perfect incompressible liquid     

Dispersion Curves for Harmonic Waves Propagating Along the Directrix of a Cylindrical Shell Reinforced with Rings

A method is proposed to study the influence of discrete ribs on the dispersion curves for harmonic waves propagating along the directrix of a simply supported cylindrical shell reinforced with rings. A numerical example is considered to demonstrate the necessity of accounting for this factor, the possibility of using a simplified formulation of the problem, and the necessity of accounting for the asymmetry of rib arrangement about the median surface of the shell     

Dispersion Equations for Harmonic Waves Propagating along a Cylindrical Shell Reinforced with A Rib Mesh (Single-Mode Approximation)

The dispersion equations for harmonic waves propagating along a cylindrical shell reinforced with a rib mesh are derived in single-mode approximation. The influence of the geometrical parameters of ring frames on the cutoff frequencies is studied by numerical examples. It is shown that with increase in the stiffness and number of frames, the number of dispersion curves decreases and their shape changes     

一种特殊梯度分布的功能梯度圆柱壳的二维分析

功能梯度材料是一种新型材料,其结构分析已成为当今力学研究的热点。本文对一种特殊梯度分布的功能梯度材料圆柱壳进行了二维精确分析。从弹性力学平面应变问题的基本方程出发,引入应力函数,导出功能梯度材料圆柱壳受静载作用下的控制微分方程。假设材料的杨氏模量沿半径方向呈幂函数分布,泊松比为常数,利用分离变量法,导出了简支边界情况下功能梯度圆柱壳的精确解。通过算例分析了不同梯度变化时,功能梯度圆柱壳内的应力和位移变化规律。计算结果表明不同梯度分布的圆柱壳结构中的应力、位移沿厚度方向的变化规律是不同的,有时甚至差别很大。因此对于材料性质梯度变化的功能梯度材料圆柱壳,必须针对其自身特点,建立相应的理论分析模型。